Registration Rejected: Max Phones Exceeded On UC 560
Hi Team
Any Help on this
max phone exceed on UC 560. When i connect new phone. I need urgent help on this.
Thanks
Hi Esa,
You are most welcome my friend
This does tell the story;
ASG-ASQ01-UC560#show platform software lic
License UDI : UC560-T1E1-K9:FGL154112G3
Maximum User Licenses : 22
Used User Licenses : 22
Available User Licenses : 0
As the uc560 has been announced as End of Life you will need to order
an add-on user license quite soon. Something like;
L-UC-PRO-8U=
Software license upgrade, authorizing an additional 8 users (e-delivery)
http://www.cisco.com/en/US/prod/collateral/voicesw/ps6788/vcallcon/ps7293/reference_guide_c07-566560.html
End of Life notice;
http://www.cisco.com/en/US/prod/collateral/voicesw/ps6788/vcallcon/ps7293/end_of_life_notice_c51-729017.pdf
Cheers!
Rob
"When it comes to luck you make your own "
- Springsteen
Similar Messages
-
UC560 Max Phones Exceeded On UC 560
Hi Friends,
I am getting an error message when i connect new cisco phone to the network. I am using UC560. is it license issue or any configuration issue.
CCA-->CONFIGURE--> SYSTEM-->system setting, where i can find that License support 104 phones ,
what could be reason license or config. please help me.
ThanksYou probably have a boat load of ephones built not showing on the GUI. SSH or telnet into the router and do show ephone. Delete the ones you dont need.
-
Max Cursors Exceeded even with XSU 1.2
In one of the messages on this forum I read Steven Muench's comments stating that the max cursors exceeded problem for big result sets in XSQL has been addressed in XSU1.2
I have downloaded this software released in April 2000 but this version still gives me this error.
Has someone been able to find a solution/workaround to this.
ThanksIt might also be an issue with the HS_OPEn_CURSORS. By default the gateway allows only 50 open cursors to be opened at the foreign database. What happens when you set in the gateway init file HS_OPEN_CURSORS=200?
If it still fails, could you upload to a public file share a gateway trace level DEBUG (HS_FDS_TRACE_LEVEL=DEBUG)?
- Klaus -
Max cursors exceeds problem(ORA-01000)
Hi
In my server open_cursors is set as 300 .We are developing a java application(using struts & Jboss web server) nearly 10 computers access the oracle 10g server through plsql procedures/functions ,frequently I am getting ORA-01000 -MAX CURSOR EXCEEDS errors,what should I do .please.....
by
s_balaThat means there is two cursor related parameters
|
|
|
|
| |
1)Cached cursors 2)Currently open cursor
1)Cached cursors 2)Currently open cursor
SQL> select o.sid,osuser,machine,count(*) num_curs
from v$open_cursor o,v$session s
WHERE user_name = 'ERP' and
o.sid = s.sid GROUP BY o.sid,osuser,machine
ORDER BY num_curs DESC; SQL>select max(a.value) as highest_open_cur,
p.value as max_open_cur
from v$sesstat a, v$statname b, v$parameter p
where a.statistic# = b.statistic#
and b.name = 'opened cursors current'
and p.name= 'open_cursors'group by p.value;
THIS IS THE RESULT I GOT
SID OSUSER MACHINE NUM_CURS
106 x 18
93 x 14
124 x 14
152 x 13
90 y y 11
121 z 8
132 a 8
118 b b 6
105 c 5
131 b 5
98 d d 4
95 x 3
147 y y 3
89 e 2
119 e 2 THIS IS THE RESULT I GOT
HIGHEST_OPEN_CUR MAX_OPEN_CUR
83 500
-This is related to ORA-01000 -MAX CURSOR EXCEEDS
From the above what I understood is correct ???
F) How to clear 1)Cached cursors ? (or) how to reduce NUM_CURS (from the above left side table ).
G) will the 1)Cached cursors give any problems to our database. -
Cannot log into blend and has said max attempts exceeded, Link will not connect either
I downloaded the Blend software on my macbook pro and it would not log in with my Blackberry ID. After 5 attempts it locked me out.
I reset my Blackberry ID and tried again, but it will not let me even attempt to login and says max attempts exceeded. I uninstalled and reinstalled and still the same problem. Also Link will not let me connect. Any ideas please? looks like I am going over to Iphone if this continues and bin my Z30.Jeff,
Thanks for the info on policy settings.
Let's see: I had 8.1.5 installed and I tried the update to 10g but only works from 8.1.7 or 9i, so then uninstalled and re-tried to do fresh install in a different home (OraHome10 vs OraHome8). That didn't go so well--it changed my 8i somehow so 8i would no longer work. Then I tried fresh install of 9i with a new starter DB--couldn't get into that DB. So uninstalled 9i, uninstalled 10g, uninstalled 8i, deleted every reference to Oracle on my computer, registry, etc., and re-tried 10g. I even went and bought a registry cleaning tool to zap things to make sure it was clean. It looked like it installed fine, provided me with starter DB but I just can't get into it. I'll let you know if the policy setting works.
I'm trying to look on the bright-side and say that we are learning a lot!
Dave -
Hi NI.
I'm trying to aquire signals from an Tektronix DPO2014 oscilloscope using Labview SignalExpress.
I have downloaded and installed the appropriate driver (at least I think )) : tkdpo2k using NI download station.
I run an ethernet connection and I do see the device in MAX, however im not quite sure if I have configured the IVI driver sessions correctly.
Anyway, when I open Signal Express, and select "IVI scope aquire" I can select my device under "resource descriptor" and the appropriate driver under "Instrument driver". I then turn on my Oscilloscope, tune in the machines tachogenerator, which is the signal the oscilloscope is to measure, and then select "autosetup" The sinosoidal waweform shows up on the oscilloscope and in SignalExpress, it is only done once. I then try and run the program and the error message accurs:
Timeout.
<ERR>Driver Status: (Hex 0xBFFA2003) Max Time exceeded before operation completed.
Is the problem regarding problems with triggertime or write/read problems with the TCP/IP connection?
What can I do to fix this problem?
Best Regards
Danny Joergensen
University of Aalborg Denmark
Attachments:
MAXscreenshot.png 265 KB
device.png 320 KBHow are you communicating? GPIB? Are you sure you have the correct address. Can you send an IDN command with MAX? Does MAX see the instrument?
Mike...
Certified Professional Instructor
Certified LabVIEW Architect
LabVIEW Champion
"... after all, He's not a tame lion..."
Be thinking ahead and mark your dance card for NI Week 2015 now: TS 6139 - Object Oriented First Steps -
jcp.endpoint.main.max.threads exceeded error on jrun 4.0.1 server
Posted: May 20, 2005 4:30 AM Reply
hi,
i am getting following error on my jrun server
'too many concurrent requests,
jcp.endpoint.main.max.threads exceeded'
The application is running on jrun 4.0.1 server.
i checked the log files but the load was too few on the day.
I tried a lots of stuff on net but could not find the solution.
pls help it out urgently
manojLisa,
I would check the online docs and/or the following HowTos for more details. They are not specific to JRun, but will give you the general process and list or archives and other things to copy and add to the classpath:
http://technet.oracle.com:89/ubb/Forum2/HTML/006397.html
http://technet.oracle.com:89/ubb/Forum2/HTML/006398.html -
hi i am getting 3194 error cause i upgrade my phone to ios 7 without registration. now my phone wanna registraion to active the phone. i can' activae my phone. now i wanna to downgrade my phone to ios6. plz tell me how i can do.
Downgrading is not supported at all.
If you're running iOS 7 beta and you're not a developer, you cannot get support from Apple. -
B2BStarter thread: (ERROR) Max retry exceeded - B2B startup
Hi,
On B2B startup we are getting the following logs.
le.receiver.minimum_age=0;http.receiver.registry_port=5110;
2010.05.04 at 09:20:25:600: B2BStarter thread: (DEBUG) initialize TransportReceiver: [Emix_Email_Inbound_Transport_Server_Node_1 < email > < Emix >]
2010.05.04 at 09:20:25:600: B2BStarter thread: (DEBUG) SMTPReceiver.init() started ....
2010.05.04 at 09:20:25:713: B2BStarter thread: (DEBUG) IMAPMonitor.setPollingInterval: polling time 1
2010.05.04 at 09:20:25:713: B2BStarter thread: (DEBUG) SMTPReceiver.init() completed.
2010.05.04 at 09:20:25:713: B2BStarter thread: (DEBUG) initialize TransportReceiver: [Emix_JMS_Transport_Server < jms > < Emix >]
2010.05.04 at 09:20:25:714: B2BStarter thread: (DEBUG) JMSReceiver.init() started ....
2010.05.04 at 09:20:25:714: Thread-15: (DEBUG) [IPT_SmtpRecPollingStatus] IMAPMonitor is up polling at 1 sec interval ...
2010.05.04 at 09:20:25:715: Thread-15: (DEBUG) IMAPMonitor.run(): IMAPMonitor goes to sleep for 1 secs ...
2010.05.04 at 09:20:25:728: B2BStarter thread: (DEBUG) Establishing JMS Connection.
2010.05.04 at 09:20:26:717: Thread-15: (DEBUG) IMAPMonitor.run(): IMAPMonitor goes to sleep for 1 secs ...
2010.05.04 at 09:20:27:719: Thread-15: (DEBUG) IMAPMonitor.run(): IMAPMonitor goes to sleep for 1 secs ...
2010.05.04 at 09:20:28:721: Thread-15: (DEBUG) IMAPMonitor.run(): IMAPMonitor goes to sleep for 1 secs ...
2010.05.04 at 09:20:29:723: Thread-15: (DEBUG) IMAPMonitor.run(): IMAPMonitor goes to sleep for 1 secs ...
2010.05.04 at 09:20:30:727: Thread-15: (DEBUG) IMAPMonitor.run(): IMAPMonitor goes to sleep for 1 secs ...
2010.05.04 at 09:20:31:729: Thread-15: (DEBUG) IMAPMonitor.run(): IMAPMonitor goes to sleep for 1 secs ...
2010.05.04 at 09:20:32:732: Thread-15: (DEBUG) IMAPMonitor.run(): IMAPMonitor goes to sleep for 1 secs ...
2010.05.04 at 09:20:33:733: Thread-15: (DEBUG) IMAPMonitor.run(): IMAPMonitor goes to sleep for 1 secs ...
2010.05.04 at 09:20:34:735: Thread-15: (DEBUG) IMAPMonitor.run(): IMAPMonitor goes to sleep for 1 secs ...
2010.05.04 at 09:20:35:737: Thread-15: (DEBUG) IMAPMonitor.run(): IMAPMonitor goes to sleep for 1 secs ...
2010.05.04 at 09:20:35:820: B2BStarter thread: (DEBUG) Establishing JMS Connection.
2010.05.04 at 09:20:36:740: Thread-15: (DEBUG) IMAPMonitor.run(): IMAPMonitor goes to sleep for 1 secs ...
2010.05.04 at 09:20:37:743: Thread-15: (DEBUG) IMAPMonitor.run(): IMAPMonitor goes to sleep for 1 secs ...
2010.05.04 at 09:20:38:744: Thread-15: (DEBUG) IMAPMonitor.run(): IMAPMonitor goes to sleep for 1 secs ...
2010.05.04 at 09:20:39:747: Thread-15: (DEBUG) IMAPMonitor.run(): IMAPMonitor goes to sleep for 1 secs ...
2010.05.04 at 09:20:40:749: Thread-15: (DEBUG) IMAPMonitor.run(): IMAPMonitor goes to sleep for 1 secs ...
2010.05.04 at 09:20:41:752: Thread-15: (DEBUG) IMAPMonitor.run(): IMAPMonitor goes to sleep for 1 secs ...
le.receiver.minimum_age=0;http.receiver.registry_port=5110;
2010.05.04 at 09:20:25:600: B2BStarter thread: (DEBUG) initialize TransportReceiver: [Emix_Email_Inbound_Transport_Server_Node_1 < email > < Emix >]
2010.05.04 at 09:20:25:600: B2BStarter thread: (DEBUG) SMTPReceiver.init() started ....
2010.05.04 at 09:20:25:713: B2BStarter thread: (DEBUG) IMAPMonitor.setPollingInterval: polling time 1
2010.05.04 at 09:20:25:713: B2BStarter thread: (DEBUG) SMTPReceiver.init() completed.
2010.05.04 at 09:20:25:713: B2BStarter thread: (DEBUG) initialize TransportReceiver: [Emix_JMS_Transport_Server < jms > < Emix >]
2010.05.04 at 09:20:25:714: B2BStarter thread: (DEBUG) JMSReceiver.init() started ....
2010.05.04 at 09:20:25:714: Thread-15: (DEBUG) [IPT_SmtpRecPollingStatus] IMAPMonitor is up polling at 1 sec interval ...
2010.05.04 at 09:20:25:715: Thread-15: (DEBUG) IMAPMonitor.run(): IMAPMonitor goes to sleep for 1 secs ...
2010.05.04 at 09:20:25:728: B2BStarter thread: (DEBUG) Establishing JMS Connection.
2010.05.04 at 09:20:26:717: Thread-15: (DEBUG) IMAPMonitor.run(): IMAPMonitor goes to sleep for 1 secs ...
2010.05.04 at 09:20:27:719: Thread-15: (DEBUG) IMAPMonitor.run(): IMAPMonitor goes to sleep for 1 secs ...
2010.05.04 at 09:20:28:721: Thread-15: (DEBUG) IMAPMonitor.run(): IMAPMonitor goes to sleep for 1 secs ...
2010.05.04 at 09:20:29:723: Thread-15: (DEBUG) IMAPMonitor.run(): IMAPMonitor goes to sleep for 1 secs ...
2010.05.04 at 09:20:30:727: Thread-15: (DEBUG) IMAPMonitor.run(): IMAPMonitor goes to sleep for 1 secs ...
2010.05.04 at 09:20:31:729: Thread-15: (DEBUG) IMAPMonitor.run(): IMAPMonitor goes to sleep for 1 secs ...
2010.05.04 at 09:20:32:732: Thread-15: (DEBUG) IMAPMonitor.run(): IMAPMonitor goes to sleep for 1 secs ...
2010.05.04 at 09:20:33:733: Thread-15: (DEBUG) IMAPMonitor.run(): IMAPMonitor goes to sleep for 1 secs ...
2010.05.04 at 09:20:34:735: Thread-15: (DEBUG) IMAPMonitor.run(): IMAPMonitor goes to sleep for 1 secs ...
2010.05.04 at 09:20:35:737: Thread-15: (DEBUG) IMAPMonitor.run(): IMAPMonitor goes to sleep for 1 secs ...
2010.05.04 at 09:20:35:820: B2BStarter thread: (DEBUG) Establishing JMS Connection.
2010.05.04 at 09:20:36:740: Thread-15: (DEBUG) IMAPMonitor.run(): IMAPMonitor goes to sleep for 1 secs ...
2010.05.04 at 09:20:37:743: Thread-15: (DEBUG) IMAPMonitor.run(): IMAPMonitor goes to sleep for 1 secs ...
2010.05.04 at 09:20:38:744: Thread-15: (DEBUG) IMAPMonitor.run(): IMAPMonitor goes to sleep for 1 secs ...
2010.05.04 at 09:20:39:747: Thread-15: (DEBUG) IMAPMonitor.run(): IMAPMonitor goes to sleep for 1 secs ...
2010.05.04 at 09:20:40:749: Thread-15: (DEBUG) IMAPMonitor.run(): IMAPMonitor goes to sleep for 1 secs ...
2010.05.04 at 09:20:41:752: Thread-15: (DEBUG) IMAPMonitor.run(): IMAPMonitor goes to sleep for 1 secs ...
2010.05.04 at 09:25:26:402: Thread-15: (DEBUG) IMAPMonitor.run(): IMAPMonitor goes to sleep for 1 secs ...
2010.05.04 at 09:25:27:404: Thread-15: (DEBUG) IMAPMonitor.run(): IMAPMonitor goes to sleep for 1 secs ...
2010.05.04 at 09:25:35:883: B2BStarter thread: (ERROR) Max retry exceeded, closing everything
java.lang.Exception: Max retry exceeded
at oracle.tip.transport.basic.jms.JMSMonitor.reconnect(JMSMonitor.java:834)
at oracle.tip.transport.basic.JMSReceiver.init(JMSReceiver.java:334)
at oracle.tip.transport.b2b.B2BTransport.init(B2BTransport.java:389)
at oracle.tip.adapter.b2b.transport.TransportInterface.initialize(TransportInterface.java:473)
at oracle.tip.adapter.b2b.engine.Engine.initialize(Engine.java:528)
at oracle.tip.adapter.b2b.init.B2BServer.initialize(B2BServer.java:280)
at oracle.tip.adapter.b2b.init.B2BStarter.startB2B(B2BStarter.java:318)
at oracle.tip.adapter.b2b.init.B2BStarter.run(B2BStarter.java:151)
at java.lang.Thread.run(Thread.java:534)
2010.05.04 at 09:25:36:424: Thread-15: (DEBUG) IMAPMonitor.run(): IMAPMonitor goes to sleep for 1 secs ...
2010.05.04 at 09:25:37:427: Thread-15: (DEBUG) IMAPMonitor.run(): IMAPMonitor goes to sleep for 1 secs ...
2010.05.04 at 09:25:43:440: Thread-15: (DEBUG) IMAPMonitor.run(): IMAPMonitor goes to sleep for 1 secs ...
2010.05.04 at 09:25:44:441: Thread-15: (DEBUG) IMAPMonitor.run(): IMAPMonitor goes to sleep for 1 secs ...
2010.05.04 at 09:25:45:443: Thread-15: (DEBUG) IMAPMonitor.run(): IMAPMonitor goes to sleep for 1 secs ...
2010.05.04 at 09:25:45:886: B2BStarter thread: (DEBUG) Establishing JMS Connection.
2010.05.04 at 09:25:46:446: Thread-15: (DEBUG) IMAPMonitor.run(): IMAPMonitor goes to sleep for 1 secs ...
2010.05.04 at 09:25:46:688: B2BStarter thread: (DEBUG) JMS Connection established.
2010.05.04 at 09:25:47:449: Thread-15: (DEBUG) IMAPMonitor.run(): IMAPMonitor goes to sleep for 1 secs ...
2010.05.04 at 09:25:47:810: B2BStarter thread: (ERROR) New connection acquired
2010.05.04 at 09:25:47:810: B2BStarter thread: (DEBUG) JMSReceiver.init() completed.
2010.05.04 at 09:25:47:810: B2BStarter thread: (DEBUG) initialize TransportReceiver: [Emix_Dummy_File_Transport_Server < file > < Emix >]
2010.05.04 at 09:25:47:810: B2BStarter thread: (DEBUG) FileReceiver.init() started ....
2010.05.04 at 09:25:47:822: B2BStarter thread: (DEBUG) FileReceiver.init() completed.
2010.05.04 at 09:25:48:452: Thread-15: (DEBUG) IMAPMonitor.run(): IMAPMonitor goes to sleep for 1 secs ...
2010.05.04 at 09:25:49:453: Thread-15: (DEBUG) IMAPMonitor.run(): IMAPMonitor goes to sleep for 1 secs ...
2010.05.04 at 09:25:50:455: Thread-15: (DEBUG) IMAPMonitor.run(): IMAPMonitor goes to sleep for 1 secs ...
The problem is, it takes quite a while for the JMS connection to get established. It fails as you see on max retries.
However it succeeds eventually.
However the B2B functionality doesnt start till the connection is established.
Any idea why this is happeninig...it takes arnd 5-8 minutes for our B2B to actually start polling/ working.
I did a tnsping to the database and it works correctly.
Plz help its urgent.
Thanks,
RoshHi Rosh,
To which JMS you are connecting (weblogic or something else)? This may happen only when the target JMS server is not reachable / there is JNDI look up issue.
Please provide details. Also refer -
Re: AIP-50077: Cannot Initialize Transport
If you are connecting to Weblogic JMS then make sure to follow below steps -
1. Add the weblogic.jar in the classpath by following the below instructions:
a. copy the weblogic.jar in $ORACLE_HOME/ip/lib/ folder
b. go to the $ORACLE_HOME/opmn/conf/ folder
c. update the opmn.xml (take the backup of opmn.xml)
c.1 add this line <variable id="CLASSPATH" value="$ORACLE_HOME/ip/lib/weblogic.jar" append="true" />
after <variable id="CLASSPATH" value="$ORACLE_HOME/ip/lib/maverick-all.jar" append="true" /> line
d. restart the B2B
2. make sure the below properties are set in IDC configuration
polling interval <polling Interval time>
Destination Provider Properties java.naming.factory.initial=weblogic.jndi.WLInitialContextFactory;java.naming.security.credentials=weblogic;java.naming.security.principal=weblogic;java.naming.provider.url=t3://<IP Address>:<Port>/
isTopic false
Connection Factory Location <Connection Factory Name>
Message Type bytes
Factory Provider Properties java.naming.factory.initial=weblogic.jndi.WLInitialContextFactory;java.naming.security.credentials=weblogic;java.naming.security.principal=weblogic;java.naming.provider.url=t3://<IP Address>:<port>/
Regards,
Anuj -
Low value asset max.amount exceeded
Hi all,
When doing a full settlement in CJ88, I am getting the following error: 'Low value asset max.amount exceeded. No posting allowed'. When I have defined a new asset class, I have copied from a LVA class. The new asset class is not an LVA asset class, therefore there is no limitation. Then, why am I getting the above error?
Please help.
Thanks,
Nasok
-
SX20 CUCM registration rejected
Hello guys.
I have an issue with integration SX20 TC 7.1 with CUCM 9.0
CUCM registration rejected.
Provisioning CUCM checked.
There is error in application_log of SX20:
Sep 17 21:35:30.411 a8 appl[1583]: 7219.85 PROV I: [requestItem] Requesting http://XXX.XXX.XXX.XX:6970/CTLSEPe4c722676b41.tlv, state=ProvItemCTL (CTL requested)
Sep 17 21:35:30.433 a8 appl[1583]: 7219.87 PROV I: [requestItem] Requesting http://XXX.XXX.XXX.XXX:6970/ITLSEPe4c722676b41.tlv, state=ProvItemITL (ITL requested)
Sep 17 21:35:30.444 a8 appl[1583]: 7219.88 PROV I: [requestItem] Requesting http://XXX.XXX.XXX.XXX:6970/SEPe4c722676b41.cnf.xml.sgn, state=ProvItemConfig (config requested (either full or mini))
Sep 17 21:35:30.452 a8 appl[1583]: 7219.89 PROV ERROR: [handleFailedProvRequest] http req URL=http://XXX.XXX.XXX.XXX:6970/SEPe4c722676b41.cnf.xml.sgn req status=failed: HTTP code=404
On the SX20 I can see a message from troubleshooting tab:
ERROR: Provisioning Status
Provisioning failed: Provisioning is in an error state.
What can be a reason, any ideas?Hello,
Do you read http://www.cisco.com/c/dam/en/us/td/docs/telepresence/endpoint/codec-c-series/tc6/administration_guide/administering_endpoints_running_tc6_on_ucm90.pdf ?
Last version: http://www.cisco.com/c/dam/en/us/td/docs/telepresence/endpoint/codec-c-series/tc7/administration-guide/administering-endpoints-running-tc72-on-ucm1051.pdf
br Oleksandr -
Low Value Asset max. amount exceeded. No Posting Allowed.
Dear All,
We are prchasing items under low asset value asset. where low asset value is limit - 5000.
Now system shown the error mseeage "Low Value Asset Max Amount exceeded. No Posting Allowed." at the time MIRO tcode.
PO - 41311*****************
GRN - 51000***************
Asset Items - 2 same items - value (4800 of each)
Please anyone give the replyHi Aman,
DId you create your asset when you created your Purchase Order?
Did you create 1 asset or 2?
Are you trying to enter both assets in the same line in the MIRO invoice? -
Skype rejects my phone number on verification
Skype rejects my phone number on verification. The number is correct.
If you're talking about the phone number used for sms verification codes with iCloud keychain, the number can be changed as follows:
iOS 7.0.3 or later: Tap Settings > iCloud > Account, then tap Keychain. Make sure the phone number under Verification Number is correct. If not, enter another phone number.
OS X Mavericks v10.9 or later: Choose Apple () > System Preferences. Click iCloud, then click Account Details. Make sure the phone number listed under Verification number is correct. If not, enter another phone number. -
X-lite Sip Phone Registration Rejected
I have an x-lite sip phone that i added as a third party(basic) sip device on cisco call manager, settings are:
UserID: <Extn No on CUCM>
Domain:<ip address of the CUCM>
Password:<CUCM Digest Credentials>
Authorization Name: <UserID on CUCM>
No Domain Proxy
What could be missing?Take a look at Mr. Bell's writeup on this:
http://www.netcraftsmen.net/component/content/article/70-unified-communications/766-sip-endpoints-in-cisco-cucm-x-lite-as-an-example.html
Please remember to rate helpful responses and identify helpful or correct answers. -
Hi,
I am having problems with the max # extents being exceeded.
I am creating a spatial index using the following script:
CREATE INDEX GIS.MYTABLE_SX ON
GIS.MYTABLE(GEOMETRY)
indextype is MDSYS.SPATIAL_INDEX
parameters ( 'SDO_LEVEL=6,
SDO_NUMTILES = 8,
SDO_COMMIT_INTERVAL = 1000,
TABLESPACE = GISI,
INITIAL = 131072,
NEXT = 131072,
PCTINCREASE = 0,
MINEXTENTS = 1,
MAXEXTENTS = 2147483645,
BTREE_INITIAL = 512K,
BTREE_NEXT = 512K,
BTREE_PCTINCREASE = 0')
This in turn creates the table
MYTABLE_SX_HL6N8$
and
the indexes
MYTABLE_SX_HL6N8$_B1
(x4 - one for each field SDO_GROUPCODE, SDO_CODE, SDO_STATUS, SDO_ROWID)
and
MYTABLE_SX_HL6N8$_B2
(x1 one for SDO_ROWID)
using the following script:
DROP TABLE MYTABLE_SX_HL6N8$ CASCADE CONSTRAINTS ;
CREATE TABLE MYTABLE_SX_HL6N8$ (
SDO_GROUPCODE RAW (14),
SDO_ROWID ROWID,
SDO_CODE RAW (14),
SDO_STATUS VARCHAR2 (1))
TABLESPACE GISI
PCTFREE 10
PCTUSED 40
INITRANS 1
MAXTRANS 255
STORAGE (
INITIAL 131072
NEXT 131072
PCTINCREASE 0
MINEXTENTS 1
MAXEXTENTS 2147483645
FREELISTS 1 FREELIST GROUPS 1 )
NOCACHE;
CREATE INDEX MYTABLE_SX_HL6N8$_B1 ON
"GIS".MYTABLE_SX_HL6N8$(SDO_GROUPCODE, SDO_CODE, SDO_ROWID, SDO_STATUS)
TABLESPACE GISI PCTFREE 10 STORAGE(INITIAL 524288 NEXT 524288 PCTINCREASE 0 )
CREATE INDEX MYTABLE_SX_HL6N8$_B2 ON
"GIS".MYTABLE_SX_HL6N8$(SDO_ROWID)
TABLESPACE GISI PCTFREE 10 STORAGE(INITIAL 524288 NEXT 524288 PCTINCREASE 0 )
The problem is when you create a spatial index using the top script the max # extents do not get applied to
MYTABLE_SX_HL6N8$_B1
and
MYTABLE_SX_HL6N8$_B2
Instead these tables take on the default max # extents set on the tablespace.
How do I set the max # extents for indexes
MYTABLE_SX_HL6N8$_B1
and
MYTABLE_SX_HL6N8$_B2
to MAXEXTENTS 2147483645 for example. I am aware that this is not good practice but I would like to know if it is possible. Is it a spatial issue? I have tried to increase the size of
the BTREE_INITIAL and BTREE_NEXT to 512K from 128K but it still complains about max # extents (999) reached. A way round it is obviously to increase the default max # extents on the tablespace but that requires DBA intervention. I would like to know how one can do this programatically using the top script or something similar.
Thanks
Regards
StephenHi Stephen,
A few thoughts:
Oracle has pretty much dropped hybrid indexing in terms of it being
a generically useful way to index data. As of 9.0.1.2 the suggestion
is to use R-tree indexes unless there is something about your
workload or data set that makes the use of R-trees bad.
If you don't use R-tree indexing, then stick with fixed indexing. The
original idea of hybrid indexing was to allow better approximations
of geometries without the index growing too large, but it turns out the
SQL index query within spatial took longer than anticipated.
In terms of setting up the spatial index, when creating a quadtree index
you can specify the btree_initial and btree_next in the parameters clause
of the create index statement, which allows you to adjust the btree indexing
parameters as you noted, but there is no way to set the max number of
extents (or in fact the tablespace used for the b-tree indexes).
When you need that control, you need to to have dba intervention to set the
default tablespace and parameters at the user level before creating the spatial
index. The parameters in the parameters clause can set up the index table
parameters, and the default parameters can be used for the btree indexes.
regards,
dan
Maybe you are looking for
-
Incomplete payload in application at request timeout
Dear All we have implemented a scenario for webservice, and its working fine. we have managed all configuration with respect to timeouts at adapter and server level and they are working fine as well... now the problem i am facing is at request timeou
-
INVALID VOLUME FILE COUNT and INVALID VOLUME DIRECTORY COUNT
Every few days, something on my machine is causing an invalid volume file count and an invalid volume directory count. Error message will read something like: Invalid volume file count (it should be 520176 instead of 520178) Invalid volume directory
-
SIGSEGV trying to run java under debugger
Hi, On HP-UX 11.00, with J2SE SDK 1.3.1.08, I am getting a SIGSEGV from 0x7f1582d8 in os_init_2 from ../jre/lib/PA_RISC2.0/server/libjv I'm trying to start the java VM in a debugger which will then run an application that's causing a few problems. Ho
-
Hi sir I have successfully developed first jsf application, i m happy, that you people helped me out, I have created jsp page, where jsf component embedded, but some confusion generating in my mind regarding: 1. hasn't jsp its own components for user
-
In labview, if you divide fractional numbers, you end up with a rounding error. For example if you use quotient/remainder and divide 0.6/0.2 the quotient should be 3, but it is 2 instead. This acts exactly the same as doing that divide and then using