Registry and Client specific configuration

it is a requriement that the user of Webstart application can configure the application and customize some parameters, I wand to store these parameters in a properties file or something. the point is where to store this properties file on the client machine so that when the application starts it directly reads this properties file from a default directory, is there any kind of registry like functionality in webstart?

You could use the Preferences API.

Similar Messages

Cross Client and Client Specific Customization in CRM 7.0

Hi All,
I have got the CRM best practices customization documnet on below link. Now there is a list of documents with seqeunce and where we perform the different customization
Best practice documents are available here: http://help.sap.com/bp_crm70/CRM_DE/HTML/Content_Library_CRM_EN_DE.HTM
If I want to distinguish between all these customization topics in two group. So Is is possible two seprate these customization steps in Cross Cleint and Client Specific customization Group.?
Regards
PG

Hi Sathyadev.
it is Really Helpful answer to me.I assaigned points to you.i had one requirement this issue like after entering Lead product in sales order, i am able to select dependent products manually.how to make automatically after entering lead products the dependent products replace lead product.
where we can do this customizing to fulfil this unctionality.
In the same way like i am not able to maintain Lead product for Upselling product.can u please tell me how to maintain lead products for Upselling products
Thanks & Regards
Kishor KUmar
Edited by: kishore kumar on Mar 5, 2010 8:45 AM

How do u segrigate cross client req. and client specific req.?

How can I find out which one is Cross client transport and client specific transport req.?

Hi tjk
In SPRO, do the following:
Menu: Additional Information->Technical Data->Client Dependence
Then all IMG nodes will have the client specific/client independent information visible.
Also:
Normally, when you try to open an IMG node of cross-client, then system gives a warning message.
Best regards
Ramki

Adding system and client specific TMS approval steps

Hello,
In defining QA approval steps, how to define a step which is not system and client wide?
When adding a new step, it is automaticaly defined with * in the client and system fields, and when changing the steps, these fields are not editable. However, there are several approval steps for which a specific system and client are entered, but this was done by a consultant, who was here some years ago.
Does anyone know how to do this?
Thanks in advance,
A

Hi Aleksandra,
Did you ever find a solution to this issue. I too have multiple QA systems in our landscape (4 system landscape), and yet I can not defined system/client specific approval procedures in STMS.
The system and client options don't even appear when I go into change mode, yet table TMSQASTEPS has the options available. Direct table update works fine, but it would be nice to know the "SAP standard" way of doing this.
Cheers
Shaun

MM02 - tab "Basic Data 2" - section of "Client Specific Configuration"

Hi, There,
If I have a configurable material that was already linked to a configuration (KMAT), is it possible for me to un-link the configuration? Or change link this material to other KMAT?
Thanks / Regards,

from OSS Note 941004 - FAQ: Configurable materials and Variants in Configuration.
1. Question: I have assigned a configurable material to material variant in MRP3/Basic data view by mistake. Why is it not possible to delete this material and assign a different configurable material ?
Answer: If the material variant has already been used, one should refrain from removing the allocated configurable material. The standard design does not allow to remove or change the allocation of a configurable material to a material variant once it is created, as this can lead to irreparable inconsistencies on the database. The only Solution offered by the SAP standard is the deletion of the material.

ALV - To diferrentiate client specific and cross client data

Hi,
In an ALV grid , i am suppose to show the client specific data and cross client data. I dont know how to differentiate these 2 type of records. Is there any standard icons available to differentiate cross client and client specific data.
Refards,
Jey

> Its fine, is there any other way to differenitate these 2 by some icons.
It is up to you to differentiate them using Icons or may be coloring differently...
Based on the Client you can populate the icon/color information.

HT203200 Have deleted temp video, configured anti spam and firewall, and one specific video keeps giving me an error. Just tried downloading a previous episode of the show and it worked just fine. Always sunny in philly "Charlie rules the world" anyone el

Have deleted temp video, configured anti spam and firewall, and one specific video keeps giving me an error. Just tried downloading a previous episode of the show and it worked just fine. Always sunny in philly "Charlie rules the world" anyone else??

Have deleted temp video, configured anti spam and firewall, and one specific video keeps giving me an error. Just tried downloading a previous episode of the show and it worked just fine. Always sunny in philly "Charlie rules the world" anyone else??

Streamlined Client Management and VDI with Configuration Manager 2012

Hi,
There is an interesting blog about managing ConfigMgr 2012 Clients in a VDI environment.
http://blogs.technet.com/b/server-cloud/archive/2011/11/15/streamlined-client-management-and-vdi-with-configuration-manager-2012.aspx
But I didn't find any way or description in the blog on how to prepare the client in the base image used for VDI. Do we still have to make the client unique before shutting down the base image? Or will this be done automatically?
Are these new attributes (IsVirtual, IsMachineChangesPersistent ...) enabled by default?
Thanks!
Gr. Cédric.

No this is handled by ConfigMgr post SP1
Are these new attributes (IsVirtual, IsMachineChangesPersistent ...) enabled by default?
For XenDesktop -no you will need to enable them in the client settings (not sure for other virtual
solutions)
In the SCCM Console go to the Administration workspace; click Client Settings. Right click the Default Client Settings and choose Properties
Choose Hardware Inventory and click Set Classes.
Click the Add button and then click Connect.
Enter the computer name of a master image device that has the SCCM client installed.
Enter root\ccmvdi as the WMI namespace and click Connect.
Select CCM_DesktopMachine. Click Ok.
Cheers
Paul | sccmentor.wordpress.com

Does WLC release 7.6 support internal DHCP when AP and client SSO is configured?

Hi,
I currently have 5508 WLCs running on release 7.6 and they are to be configured in 1:1 HA mode. Would like to know if internal DHCP is supported if AP and client SSO is to be configured.
Thanks in advance.

Unfortunately, till date no AirOS release supports Internal DHCP when AP SSO is configured.
For details, check HA Deployment Guide. It says following :
"Internal DHCP is not supported when SSO is enabled."
-Thanks
Vinod

Significance of client specific and client indeprndent table

Hi I am new to SAP world.
I have just joined SAP-ABAP training.
Plz let me know significance of client specific and client indeprndent table.
Can we make client independent table in SAP IDES software.
Is their any client independent table in SAP inbuilt tables .
Thanks

hi,
A table can be either client-specific (applying only to a single client) or client-independent (applying to all clients in the SAP system).
· Client-independent tables
Client-independent tables contain data of general relevance, for example, SAP system control data, language indicators, and transaction codes.
· Client-specific tables
Data which only applies to one client is stored in client-specific tables. Examples of client-specific tables are tables containing application data, tables containing information about the structure of a company, and, with a limited number of exceptions (for example, language indicators), tables containing basic commercial data.
A table attribute in the Data Dictionary indicates whether a table is client-specific or client-independent (see also "Creating a Table Structure" in the ABAP/4 Dictionary guide). In client-specific tables, the client is always entered in the first key position.
hope this is helpful.
pls reward if helpful.

Is there is any way to find the data transfer from client to Configuration Manager for health monitoring and hardware Inventory

Hi
Can Configuration Manager provide a way to find the data transfer from client to Configuration Manager for health monitoring and hardware Inventory. How can I know what amount of data is consumed during that process

Place archive_reports.sms in %systemroot%\ccm\inventory\temp\ for both 64-bit and 32-bit computers.
There are two situations where you can use this depending on the type of client:
1. To keep inventory reports on a client (that is not an MP), create the following file:
%systemroot%\ccm\inventory\temp\archive_reports.sms
2. To keep inventory reports on a MP (that is also a client), create the following file:
<x>:\sms_ccm\inventory\temp\archive_reports.sms
The XML file will be saved in the inventory\temp folder.
More information on the above here: http://blogs.technet.com/b/configurationmgr/archive/2012/09/17/controlling-configuration-manager-2012-using-hidden-files.aspx

WSUS server and client configuration issues

I just inherited WSUS from my predecessor (it was turned off because of a full disk) so I’m still learning how to use it. Turning it back on I changed where updates should come from, they were stored locally and now I’m pulling them down off of the Microsoft
Update location. What I’m seeing is that I have a bunch of computers that WSUS “sees” but are showing “Failed or Needed” status. Unless I visit each machine and manually do the updates this status does not change. Additionally I have some client computers
(Windows 7) that are not showing up as managed by WSUS. If I reading this right I’m running version Update Services 6.2.9200.16384 on Management Console 3.0 Version 6.2 (build 9200) on Windows Server 2012.
How can I force WSUS to automatically update the “Failed and Needed” devices?
How can I get those clients that are not being managed by WSUS to be managed?
Some of the things that I have done so far on the server and clients are:
Create a GPO (see attached for WSUS)
wuauclt
/detectnow
wuauclt /reportnow
wuauclt.exe /detectnow
gpupdate /force after
modifying the GPO
I even ran the SolarWinds WSUS diagnostic (as a non-administrator) and got this as the output:
# Solarwinds® Diagnostic Tool for the WSUS Agent # 1/23/2015
Machine state
User rights: User does not have administrative rights (Administrator rights are not available)
Update service status: Running
Background Intelligent Transfer service status:
Running
OS Version: Windows 8.1 Pro
Windows update agent version:   7.9.9600.17489 (WU Agent is OK)
Windows Update Agent configuration settings
Automatic Update:    Enabled
Options: Automatically download and notify of installation
Use WSUS Server: Not found (There is no such key)
Windows Update Server: Not found (There is no such key)
Windows Update Status Server: Not found (There is no such key)
WSUS URLs are identical: Values are empty
WSUS Server Connectivity -- Connectivity check is impossible
So, my questions are:
What tool do I use to configure the client machine?
How do I get WSUS to update my clients?
Thanks
Sam

Steven,
I'm pretty sure that this is not the right forum to discuss this in but just so we can close this case.
On my computer I ran the command gpupdate /force I
then rebooted my computer to make sure that the group policy would be updated. The first screen shot is from my domain controller and the second is from my computer. As you can see the Domain Controller has the correct settings but the local machine doesn't.
Other parts of the DC GPO settings have worked so I'm somewhat comfortable that it is being propagated properly.

Client Specific TMS configuration

Hi,
How can configure client specific STMS
For eg;
Development Request from client 100 goes to Client 100 in quality, client 200 from Development200 goes to Qulaity Client 300.
Dev(100) --- Quality(100) -- Production
Dev(200) --- Quality(300) -- Production
Thanku

Hai,
You can use Extended Transport control to achieve this.
http://help.sap.com/saphelp_nw04/helpdata/en/1b/9dc2d6e59911d184810000e8a57770/content.htm
http://searchsap.techtarget.com/tip/1,289483,sid21_gci916309,00.html
Regards,
Yoganand.V

Split database to client specific and cross client

Hi
Do we have a known method to split an existing MaxDB database into two .
1. Client Specific database
2. Cross client database
Thanks and Regards
Sri

What you can do is to use TDMS (Test Data Migration Server), it´s a separate product and it enable you to setup test/training systems with a reduced amount of production data.
This system makes use of technologies to determine, whether a table is client depend and client independent.
Your problem is, that the client specific data NEEDS the cross client data, it relies on the customizing, that is cross client.
If your pupose is to e. g. extract some kind of data because parts of your company was sold or if you bought a new company, then you should contact the SLO group (http://service.sap.com/slo) that does those kinds of "separations" too.
From a technical level, it´s certainly possible but wihtout knowing your initial intent why you want to do that, one can give just advises, what we "think" what the reason might be.
Markus

How to synchronize PI service registry and IBM WSRR

Hello All,
In our current project we have developed one web service which resides in SAP CE and is registered in SAP PI Service Registry.
But our client has IBM websphere that acts as a middleware for all ther services (interfaces/web services)
Now, I need to understand how to synchronize SAP PI Service Registry with IBM WSRR (Websphere Services Registry and Repository)
What are the steps/configurations need to be performed at PI end and IBM WSRR end?
Appreciate your help in this matter.
Thanks,
Shriram.

Hi,
Refer the below links i think it will be helpful.
Configuring a central Services Registry:
http://help.sap.com/saphelp_nwce711/helpdata/en/47/d391d7b8fc3c83e10000000a42189c/frameset.htm
You can also use the Wizard based configuration: http://help.sap.com/saphelp_nwce711/helpdata/en/f7/6182bd68434595ba5105a0a346efcc/frameset.htm
https://www.sdn.sap.com/irj/scn/index?rid=/library/uuid/00985388-6748-2c10-0d83-f17c3e768a8b&overridelayout=true
Regards,
Sudha S.

Registry and Client specific configuration

Similar Messages

Maybe you are looking for