Registry entry to set defaults in Advanced Print screen

Hi everyone,
I can usually find these sorts of things out myself, but a bit stuck on this one so any help is appreciated..
I need to find a registry key that I can use in my Group Policy, that will automatically set a particular screen in Acrobat to its default settings.
The screen I am after is:
1. Open a file in Acrobat 9
2. File --> Print
3. Click on Advanced in the lower left corner
4. 'Settings' in the top left I need set to Acrobat Default, rather than Custom..
Has anyone had to do this before and/or able to help me please? I have looked inside the registry and unable to find anything related to the particular option..
Thankyou in advance
Alem

Hi,
In Advanced tab, in "Print in Grayscale" pull down and seleck "Black Ink only".
Please note: even black only, the printer still consumes color inks during warming up process to keep printer in good shape.
Regards.
BH
**Click the KUDOS thumb up on the left to say 'Thanks'**
Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem.

Similar Messages

How to set default values on the screen painter parameters?

Hello ABAP Gurus,
I would just want to ask how to set default values on the screen painter parameters.
Thank you for your replies.

Hi,
To set default values for screen painter parameters initialize the field names with default values in the PBO module....
say u have the field name as f_field1....
in the PBO of that screen initialize it....
f_field1 = '100' "here 100 is the default value.
<b>reward points if useful.</b>
regards,
Vinod Samuel.

Set Default Layout in Selection Screen of FBL3N

Dear All,
Here in FBL3N presently i we have a default layout is /balaji.
But now i want to change this as a standard layout 1sap.
I can try this in path SETTING->ADMINISTRATOR->SET DEFAULT LAYOUT.
But after done this and save this procedure when i run this Transaction again
no change effected.
Means my change is not effect in selection screen of FBL3N.
So can anybody tell me how can i change my default layout in selection screen of FBL3N .
Please kindly help me ....
Thanks
Keyur

Hi,
Try with below navigation
Run the report and go to the menu settings->Layout->Choose
and also go through this link
http://wiki.sdn.sap.com/wiki/display/ERPFI/Howtochange-setdefaultlayoutintransactionFBL1N%2CFBL3NandFBL5N
regards
kk

HP C4280 Setting Default to Grayscale Printing

Hi,
New to the Mac as of 2 weeks ago. I am driving myself crazy trying to find out where to change the defaults for the C4280 printer.
Can someone guide me to the right place?
Thanks,
-Mark

Hi,
There are several different printing solutions available for Android, such as HP's built-in print solution for Android, the HP ePrint mobile app, HP's built-in print solution for Android, etc..
As much as I aware, none will allow setting duplex printing as default, still.. mobile printing is more limited than a standard PC..
The HP plugin allow printing to a printer connected to the same local network from several apps which support the plugin, its features are limited as included in my previous link.
The HP ePrint mobie app allow printing to both a printer connected to the same network or via the cloud using the HP ePrint service to print even when the Android device is not connected to the same network as the printer.
As well there is a new 3rd party service, the Mopria Print Service which allow printing from specific apps through the local network, it should be quite similar to HP's built-in print solution for Android
The following document list different printing solutions available for Android and can be viewed as a reference:
http://h10025.www1.hp.com/ewfrf/wc/document?docname=c03679829&tmp_task=useCategory&cc=us&dlc=en&lc=e...
The following document also list different prinitng solutions for Apple or Android devices and include a description of any of the options I included above:
http://h10025.www1.hp.com/ewfrf/wc/document?docname=c03722645&tmp_task=setupCategory&cc=us&dlc=en&lc...
I surely do not mean to confuse you, but would like to provide you any of the options (Yes, I know, it is quite a confusing field..) and worth trying if it may allow changing the default settings, I personally not aware so it worth trying..
Hope that helps,
Shlomi
Say thanks by clicking the Kudos thumb up in the post.
If my post resolve your problem please mark it as an Accepted Solution

Set default value to selection screen for report

Hi All,
   I've a report selection screen which has 3 fields from the report category: PNPPERNR, PNPSTAT1, PNPBTRTL. My logical database is PNPCE.
   How can I set the default value to the field PNPSTAT1? Means when I first display the selection screen, the value for this field will automatically display '3' in it.
   Hope someone can help me on this.
Thanks.

Hi All,
   Thanks for reply. But I think I should declare my question clearer.
   Actually it's not a parameter.
My problem is when using the logical database, if you define a TABLES: PERNR, then you can see the SAP standard report selection screen. So my selection screen has 3 standard fields which are PNPPERNR, PNPSTAT1, and PNPBTRTL.
   I need to set the default value '3' to field PNPSTAT1.
Thanks.

How to set set default value in dialog screen?

Dear experts:
          As subject. If I want to set system date/time, login user id in a dialog screen , how can i do? Just like parameter or select-options statement, when use 'default XXXX', then in the selection screen will show default value.
Best Regards,
Nicole Chen

Hi,
here are two simle ways to do it.
first as parameters with only display, second as comment in selection screen.
PARAMETERS: P_UNAME LIKE SY-UNAME MODIF ID DSP DEFAULT SY-UNAME.
PARAMETERS: P_DATUM LIKE SY-DATUM MODIF ID DSP DEFAULT SY-DATUM.
PARAMETERS: P_UZEIT LIKE SY-UZEIT MODIF ID DSP DEFAULT SY-UZEIT.
SELECTION-SCREEN: BEGIN OF LINE.
SELECTION-SCREEN: COMMENT 20(20) T_UNAME.
SELECTION-SCREEN: END   OF LINE.
SELECTION-SCREEN: BEGIN OF LINE.
SELECTION-SCREEN: COMMENT 20(20) T_DATUM.
SELECTION-SCREEN: END   OF LINE.
SELECTION-SCREEN: BEGIN OF LINE.
SELECTION-SCREEN: COMMENT 20(20) T_UZEIT.
SELECTION-SCREEN: END   OF LINE.
AT SELECTION-SCREEN OUTPUT.
LOOP AT SCREEN.
    IF SCREEN-GROUP1 EQ 'DSP'.
      SCREEN-INPUT       = '0'.
      MODIFY SCREEN.
    ENDIF.
ENDLOOP.
INITIALIZATION.
WRITE SY-UNAME TO T_UNAME.
WRITE SY-DATUM TO T_DATUM.
WRITE SY-UZEIT TO T_UZEIT.
Hope it helps.
regards, Dieter

How to set default variant for selection screen

Hi,
I want to make one variant as default for selection screen for one user.
For eg., take COOIS. For the selection screen, i have 3 variants. But i want one variant to be default. Thsi is not for all users. Thsi is for particular user.
I am not seeing any way to do this. please help me..
Thanks
Srini

Hi,
If you are using Z program then you can ask your developer to get Variant name Runtime from Parameter ID.
This means you decide a Parameter ID name : ZVAR in your Z program and ask your developer to load variant each time your Z program loads.
Now, second step will be using SU01 transaction you can set value of ZVAR in Parameters tab for the user. This value will be the variant which you created for this user.
This will solve your problem and you can make n number of variants and assign it to different users.
Regards,
Arpit

Set Default Windows 8 Start Screen

Hello,
I'm trying to find a way to set the Start Screen with a simple command or script on every computer I image. I tried going through the GPO route but that locks the start screen completely so users cannot then add their own icons to it. We have a standard
image that comes with a Start Screen layout that we would like to modify but cannot modify the unattend.xml because it is company wide. Is there a way to do this?
Thanks.

Hi,
If you want to customize the Start Screen,we need to use MDT tool to implement this work.
We can manually customize the Start Screen, then use CopyProfile to apply the customizations to the default user profile.
Also,I would like to share the following link with you:
http://blogs.technet.com/b/deploymentguys/archive/2012/10/26/start-screen-customization-with-mdt.aspx
Regard,
Kelvin hsu
TechNet Community Support

How to set default file type for screen capture?

I want to change the default from .jpg2 to .jpg when doing a screen selection
capture (cmd-shft-4). Where is the place to do this?
Thank you,
todd

Todd,
OnyX has 10 screen shot options available in Parameters>General>Screen Capture format:
;~)

Registry entry to force install of reader updates?

Greetings!
I've been trying to deploy Reader updates across our network via GPO but it's been a real, real hassle. Also, because some of the client PCs are connected via slow links the install time is sometimes excruciatingly long (computer configured GPO).
SMS is not an option right now, so I'm thinking that rather than use GPO to centrally manage reader updates I throw up my arms and leave it up to the users. So my question is if there is some sort of a registry setting that will force Reader updates to install once they are downloaded from the Internet. Or, alternatively, if there some sort of login script available that would check if there was a Reader update available for installation and forcibly install it. Or, alternatively, if anyone has figured out a better way to deal with the Reader GPO deployment nightmare.

Hi,
Well, as you mentioned, GPO would have been the best option to update across an enterprise network. You can refer to the guide at http://kb2.adobe.com/cps/837/cpsid_83709/attachments/Acrobat_Enterprise_Administration.pdf. It may give you some more tips on how to maybe change your settings to ensure a speedy install.
As far as your second question is concerned, you can use the "Automatically Install Updates" option for the Reader Updater, which will automatically install the updates as and when it downloads any. The registry entry to set the same is as below:
Prior to Reader 10.1:
[HKLM]\Software\Adobe\Adobe ARM\1.0\ARM\
Name: iCheck (DWORD)
Value: 3
Post Reader 10.1:
[HKLM]\Software\Adobe\Adobe ARM\1.0\ARM\
Name: iCheckReader (DWORD)
Value: 3
You can set the same using a login script via GPO itself. This will ensure that any and all updates as and when available will be installed as soon as its downloaded, provided no process of Reader is running at that time.
For more details on all the configurations on the updater preferences, please refer to the following document:
http://kb2.adobe.com/cps/837/cpsid_83709/attachments/Acrobat_Reader_Updater.pdf
Hope this helps
Ankit

How to maintain default values to the screen fields.

hi,
i m creating screen in se51.
when i press New button the screen is filled with default values
nrart = 'h' and proz1 = '100' .
how can i set default values.
plz give me a response

HI,
You can set default values on to screen fields using SET and GET PARAMETER command, You need to assign a PARAMETER ID for that screen field and then use SET PARAMETER before the screen is called or in the PBO of the screen, you can set default values direcly in PBO of the screen but then you have hard code those value or read the data from database.
You need to have a TABLES statement to create a strucutre that you used to create your screen fields, then when you set value to these strucutre fields these values will get tranported to the screen fields automatically.
Regards,
Sesh

How can set custom advanced print setting to default?

Hi
I am using job automation program called enfocus switch and
Every time it automatically print out PDF file, i wanted it to be printed out with bleed mark and page information.
As i go to advanced print setup, i can achieve this by set setting to custom setting that has checked bleed mark and page info.
Is there any way to set custom setting as default so Evey time enfocus program print out PDF, it is printed out with bleed marks and page info.
Thanks

this is what i wanted it to be default. checked bleed marks & page information
went to setting-adobePDF. coudn't find any thing related to bleedmark and page info.
Hope this give you more detail thank you for your time.

How to set default printing in black only

Greetings,
I'd like to set my default printing with Firefox at black ink only, which I can do individually prior to printing a page, but it reverts to color after that printing. But if I set the size at, say, 80%, that becomes the default setting, or if I set portrait/landscape for a single printing, that becomes the default setting. Why can't the desired black-ink only setting default like the size/portrait/landscape setting? What I want to do is set the printing permanently at black only, and the size at 100%, but allow one-time printing at landscape or portrait, or sizes less than 100% without those settings becoming the default. How can I do this? Thanks for any help
Best wishes, Tom
I've tried the help solutions on the website to no avail....

Greeting ideato,
Thanks so much for your reply. I've clicked on the Firefox button at upper left, then Print, then Properties, then Advanced, under which is listed Printer Features (I have only 1 printer), below which is a line with Print in Grayscale, clicking on which has has 3 options: Off (apparently default), High quality Grayscale, and Black Ink Only. I click on the latter, and click on OK for this window and others in the sequence, and it'll print in black only for the present printing, but will revert to color for the next printing, 'though like I said, if I change the size to 80% or from portrait to landscape, those settings will remain. I can't figure it out. Again, thanks for any help.
Regards, Tom

Group Policy - Computer Startup Scripts - Add/Set Default printer

Good Morning.
Let's say we have 2 offices, A and B, and only 1 user. The user is using Roaming Profiles. Each office has its own printer.
What I am trying to do, is make a Startup script that is specific to the COMPUTER being logged into so when any user logs into that computer, they get the printer in that office defined and set as default.
I am able to do this successfully with my script but ONLY if i have the script be on the USER side of GP (i.e. in the Logon script section)
That is great that that is working however, when my user goes to Office B, they still get mapped to Office A's printer if I use that method.
So I figured I could just modify my GP and run the same script from the STARTUP section of the computer, rather than the LOGON section of the user. It does not work.
Here is my script:
Set WRFCUNetwork = CreateObject("Wscript.Network")
PrinterPath = "\\fileserver\MAINTELLER"
PrinterDriver = "PrinterDriver"
WRFCUNetwork.AddWindowsPrinterConnection PrinterPath, PrinterDriver
WRFCUNetwork.SetDefaultPrinter "\\fileserver\MAINTELLER"
This is where I Have the script placed:
     Computer Configuration -> Windows Settings -> Scripts(Startup/Shutdown)
Once i'm in there, I double click Startup, click Add, and select my script which is named:
     MainPrinterSetup.vbs
I have this GP applied to ONE OU, and that OU has ONE computer in it (my test computer)
I login with a brand new user called "testuser" (creative, huh?) and basically nothing happens
except they log in and have some Microsoft Document Image Writer printer set as default (which by the way sure does slow the PC down to the point of it almost being broke if anyone actually tries to print to that by accident)
No Main Teller Printer, no anything.
The strangest part about this is, if i apply this script to the user LOGON scripts, it works fine, the printer is there, and is set as default. (but see above why that wont work for my situation)
So obviously the script works fine, but I guess i'm missing something when it comes to applying GP's to Computers rather than Users.
Can anyone shed some light as to why the script is not running (i'm guessing the script isn't even attempting to run, rather than failing, but i have no way to know that)
Thank you in advance!!
Derek Conlon
Network Administrator
WRFCU
EDIT: Here are the PC's info that i'm working on:
     Server: Windows Server 2003 Standard Edition (where my GP's are created and managed with AD)
     Target PC: Windows XP Professional SP3
EDIT #2: I manually navigated to the Script file after logging in and "opened" it and it added and set the default printer no problem. the issue is definately with the script running at startup.

I wanted to clarify a few things:
1. While it is true that printer connections are usually per user, it is definitely possible to create "global printers". There are a number of ways to do this, but two methods that come to mind are using:
a. "Rundll32 printui.dll,PrintUIEntry" option with the "/ga" switch. The "/ga" switch is the key here since it allows you to deploy printers "per machine" instead of "per user". More information
about this is available at:
http://members.shaw.ca/bsanders/NetPrinterAllUsers.htm
http://technet.microsoft.com/en-us/library/ee624057%28WS.10%29.aspx
http://www.computerperformance.co.uk/Logon/logon_printer_computer.htm
http://www.robvanderwoude.com/2kprintcontrol.php
b. The Print Management console that is available in Windows 2003 R2 and higher can help you deploy printers "per machine" in addition to "per user". More information about this is available at:
http://www.czsolution.com/print-management/print-management/print-management-console.htm#DeployingPrintersByGroupPolicy
http://technet.microsoft.com/en-us/library/cc753109%28WS.10%29.aspx
2. As Guy mentioned, Group Policy Preferences can help set the default printer. But there is another way to accomplish this. The problem with the computer startup portion is that it runs before the user logs in. And applying this script
in the login script section would not work per computer unless you used loopback processing. So another way to do this is to place a script that sets the default printer into the "All Users" startup folder. Items in the "All Users"
startup folder run for any user that logs into the computer, but it runs in the user's context. So, this script would effectively set the default printer on a "per machine" basis. The script method is a cruder way to approach the problem,
but it will help get the job done. Here are some resources on setting the default printer via script:
http://www.intelliadmin.com/index.php/2007/08/set-default-printer-from-a-script
http://www.computerperformance.co.uk/ezine/ezine17.htm

Load an Advanced Print Setting in Acrobat via Java-Script

Hi there,
I'd like to know, if there's a way to load an advanced print setting in the Acrobat via Java Script or some other way? (See Screenshot)
Or is it possible to set an created setting as default-setting? (also via Java or something)
Or can somebody tell me, where these created print settings are saved? (in Acrobat X)
Thank you very much for your help and sorry for my english, I hope you understand me. :-)
Kind regards
Mankro

Why wouldn't you want to set itas part of an input/output parameter?
This is really the right way ofdoing this. Otherwise you'll end up with hardcoded variable name in your customcomponent and that not ideal.
If you're trying to define a default value for it coming from a properties file, you can just make it a "Configuration" variable and set the value from adminui.
Jasmin

Registry entry to set defaults in Advanced Print screen

Similar Messages

Maybe you are looking for