Registry Monitor service signficantly impacting startup performance

Hi,
I've observed that the ThinkVantage Registry Monitor service significantly impairs Windows startup performance, and (I believe) completely unnecessarily so. I'm using Rescue and Recovery version 4.21.0016 in a fully updated Win XP SP3.
Between tvt_reg_monitor_svc itself, the accompanying anti-virus process overhead, and their disk access, the system is practically unusable for a couple minutes and "laggy" in anything requiring disk reads for many minutes after that. If at the first opportunity, however, I lower the CPU priority of the tvt_reg_monitor_svc.exe process to Below Normal, the system is instantly responsive again and the startup process completes pretty quickly. tvt_reg_monitor_svc gets all its work done, but does so without creating an I/O bottleneck on the system during the already disk-intensive startup process.
Why does tvt_reg_monitor_svc run with Normal priority? Please improve system performance, at startup in particular, by making tvt_reg_monitor_svc run with reduced CPU priority.
Thanks for your consideration.

Hello,
Have you tried excluding the ThinkVantage Registry Monitor service from being scanned by the antivirus software? If so, did that provide any noticeable improvement in performance?
Regards,
Aryeh Goretsky
I am a volunteer and neither a Lenovo nor a Microsoft employee. • Dexter is a good dog • Dexter je dobrý pes
S230u (3347-4HU) • X220 (4286-CTO) • W510 (4318-CTO) • W530 (2441-4R3) • X100e (3508-CTO) • X120e (0596-CTO) • T61p (6459-CTO) • T43p (2678-H7U) • T42 (2378-R4U) • T23 (2648-LU7)
Deutsche Community Comunidad en Español Русскоязычное Сообщество

Similar Messages

Registry Monitor Service Harddisk Grind

Hello Lenovo,
I am having problems with the Lenovo T61 with Windows Vista.
At the startup there was an unacceptable lot of CPU activity and harddisk hdd grinding for 15 minutes. Since I intend to preserve my harddisk, I have identified the following culprits:
Vista ReadyBoost
Vista Prefetch Service
Vista ReadyBoot
Lenovo Registry Monitor Service
Now, I have disabled the ReadyBoost Service, the Prefetch Service, and the ReadyBoot (through the Event Viewer - search for it on www to see where to drill down to do this), but the Registry Monitor Service is causing the most problems.
Lenovo describes the Register Monitor Service as a general service used by other applications to support various Lenovo functionalities - these you want to keep, including the fingerprint security made available through the Client Security mechanism.
I too have tried removing scheduler_proxy.exe and tvt_reg_monitor_svc.exe from the registry, under Run. But they just come back. I have tried disabling the Register Monitor Service altogether, deleting its file - it just comes back when I use the fingerprint identifier. I have tried making the service startup manual, which is also unsatisfactory.
What I would like is a real solution, it could along the lines of one the following:
1) An updated tvt_reg_monitor which only does what its name implies - in other words which is decoupled from the functionalities mentioned by Lenovo, including Client Security. This would enable me to disable the monitor.
2) A way to configure the tvt_reg_monitor_svc.exe to NOT look through the registry for changes, while still providing the fingerprint functionality.
What do you think I should do?

Hello,
Have you tried excluding the ThinkVantage Registry Monitor service from being scanned by the antivirus software? If so, did that provide any noticeable improvement in performance?
Regards,
Aryeh Goretsky
I am a volunteer and neither a Lenovo nor a Microsoft employee. • Dexter is a good dog • Dexter je dobrý pes
S230u (3347-4HU) • X220 (4286-CTO) • W510 (4318-CTO) • W530 (2441-4R3) • X100e (3508-CTO) • X120e (0596-CTO) • T61p (6459-CTO) • T43p (2678-H7U) • T42 (2378-R4U) • T23 (2648-LU7)
Deutsche Community Comunidad en Español Русскоязычное Сообщество

ThinkVantage Registry Monitor Service consuming too much CPU!

My X200 Tablet is often in an unusable stable for 10~20 minutes after a reboot or a wakeup from a sleep/hibernation state. I noticed it's mainly because CPU is busy with the ThinkVantage Registry Monitor Service.
I noticed that although the CPU usage of "tvt_reg_monitor_svc.exe" is often <10%, another process "System" is often taking >80% CPU when "tvt_reg_monitor_svc.exe" is running. "System" CPU usage immediately comes down when "tvt_reg_monitor_svc.exe" is killed. Is it a kind of camouflage? Thanks!
I was not able to disabling the registry monitor service completely either. Although I can stop and disable it in the Services control panel, it will automatically come back to life after a reboot. I heard that it may be because some other lenovo services, such as the Fingerprint Server, Rescue & Recovery, may need the Registry monitor service.
Anyone know how can I continue to use RnR and the fingerprint service but keep the annoying Registry Monitor service disabled? I'd like to use the fingerprint reader for convenience, and use RnR for saving data too! (my laptop, half a year old, crashed once already, and RnR saved my data!) Or, how to make the Registry Monitor use less CPU?
BTW, my X200 tablet is running Windows XP SP3, and currently up-to-date using both lenovo's "ThinkVantage System Update" and microsoft's "Windows Update".
Thanks!

Hi,
this situation was fixed by one patch, so please try to install following patch, if this fixes your situation too:
http://www-307.ibm.com/pc/support/site.wss/document.do?sitestyle=lenovo&lndocid=MIGR-69109
Let me know, if this helps.
Cheers

What's a good 3 bureau monitoring service???

Morning All, Whats a good 4 bureau monitoring services that gives you access to your scores, and allows you to view your three credit reports on a daily basis? I have USAA Credit Monitoring premium, and it's changing and will only allow me to pull my report once a month starting in 45 days. I like to pull it daily to see what's been updated, what my utilization is, and if there's been and changes at all. Can anyone recommend a product for me? I was looking at the myFICO 3-bureau report for $24.95, and thats what I currently pay and would like to stay in that price range as well. Thanks for the help.

MrDre wrote:
Pway wrote:
I agree Credit Check Total is excellent. I had the 7 day trial and I continued the membership and I got the 14.97 as well. They are giving your true fico scores. Is that it? just call within 7 days when you try to cancel they will make you an offer? is it just for 1 month or every month 14.95? Many people have reported that they are offered the $14.97 deal for two years when calling to cancel. I went about it slightly different. I called when I was about 4 or 5 days into the 7 day trial period, explained that I really liked the product, but thought that $30/mo was too high. Immediately, the rep that I spoke to stated that she could lower it to $14.97/mo for two years. It appears it is simply there for the asking. The rep also stated that it is likely that after the two years there would be other discounts available, but obviously could not guarantee it. I like what I see with CreditCheck Total so far. I am receiving alerts, Experian updates each day, as well as the ability to have a 3-bureau report with FICO 8 scores, three times a month. Appears to be a very good deal. The only thing I have not figured out yet is if any unused 3B reports carryover to the following month, or if we lose them.

Monitoring Services Installed on Oracle apllication Server using ITCAM

can we Monitoring Services Installed on Oracle apllication Server using Tivoli ITCAM for J2EE.

Hi All,
Finlly got rid of the problem by incuding ' loaderRef="oracle.tasks.loader" ' in my taskdef tag.
Earlier it was
<taskdef resource="oracle/antlib.xml" uri="antlib:oracle" >
<classpath>
 <pathelement location="${oracle.home}/j2ee/utilities/ant-oracle-classes.jar" />
 <pathelement location="${oc4j.home}/lib/javax88.jar" />
 <pathelement location="${oc4j.home}/admin_client.jar" />
 <pathelement location="${oc4j.home}/oc4jclient.jar" />
 <pathelement location="${oracle.home}/webservices/lib/wsa.jar" />
 <pathelement location="${oc4j.home}/lib/bcel.jar" />
</classpath>
</taskdef>
Now it is
<taskdef
 resource="oracle/antlib.xml"
 uri="antlib:oracle"
 loaderRef="oracle.tasks.loader" >
 
 <classpath>
 <pathelement
 location="${oracle.home}/j2ee/utilities/ant-oracle-classes.jar" />
 <pathelement location="${oc4j.home}/lib/javax88.jar" />
 <pathelement location="${oc4j.home}/admin_client.jar" />
 <pathelement location="${oc4j.home}/oc4jclient.jar" />
 <pathelement
 location="${oracle.home}/webservices/lib/wsa.jar" />
 <pathelement location="${oc4j.home}/lib/bcel.jar" />
 </classpath>
 </taskdef>
cheers ;-)

SAP PI ESR in the role of Central organization registry for services

Can SAP PI serve this role in an outside-in developnet hence
a 3rd party system provide the WSDL
SAP PI register the provided Web service, Provide SOAP end points and document the Web service centrally.
What about version managment of services?
Apprciate your thoughts.

Hi,
SAP Service Registry (delivered with PI7.1) is based on UDDIv3 standard and it will support all the services whether belong to SAP, inhouse developed or delivered by external provider.
To publish those service in Service Registry, goto service registry "Publish" button and browse for wsdl of webservices and follow the step by step wizard.
Regards,
Gourav

Regarding Monitoring Service for Solution manager

We need to configure "Monitoring" services in SAP solution manager 7.0.
Could somebody suggest us what are the main tasks we need to consider for doing Monitoring settings.
How many Minimum servers required to configure Monitoring services in solution manager system.
Also if any good document reference for this?
Thanks

Hi Jai,
welcome to sdn.
COMPONENTS & TOOLS OF SAP NETWEAVER
SAP Solution Manager
The SAP Solution Manager application management solution facilitates technical support for distributed systems u2013 with functionality that covers all key aspects of solution deployment, operation, and continuous improvement. A centralized, robust application management and administration solution, SAP Solution Manager combines tools, content, and direct access to SAP to increase the reliability of solutions and lower total cost of ownership.
With SAP Solution Manager, you can be sure your entire SAP solution environment is performing at its maximum potential. The toolset addresses your entire IT environment, supporting SAP and non-SAP software and covering current and forthcoming SAP solutions. And, as a customer of SAP, you have full access to the core SAP Solution Manager for no extra charge.
SAP Solution Manager targets both technical and business aspects of your solutions, focusing strongly on core business processes. It supports the connection between business processes and the underlying IT infrastructure. As a result, it eases communication between your IT department and your lines of business. And it ensures that you derive the maximum benefits from your IT investments.
SAP Solution Manager features and functions include:
SAP Business Suite implementation and upgrades u2013 SAP Solution Manager provides content that accelerates implementation. Configuration information and a process-driven approach to implementation speed the blueprint, configuration, and final preparation phases. SAP Solution Manager enables efficient project administration and centralized control of cross-component implementations.
Change control management u2013 SAP Solution Manager controls all software and configuration changes of the IT solution. This includes the approval process for change requests, the deployment of changes, and later analysis of changes. This ensures quality of the solution and enables traceability of all changes.
Testing u2013 SAP Solution Manager speeds test preparation and execution. It provides a single point of access to the complete system landscape and enables centralized storage of testing material and test results to support cross-component tests.
IT and application support u2013 The service desk included in SAP Solution Manager helps you manage incidents more efficiently and eases the settlement of support costs. Centralized handling of support messages makes the support organization more efficient.
Root cause analysis u2013 The diagnostics functions in SAP Solution Manager allow identification, analysis, and resolution of problems, even in heterogeneous environments. This helps to isolate general performance bottlenecks, to isolate exceptional situations, to record the activity of single users or processes, and to identify changes to the productive landscape. As a result, problem resolution is accelerated and business availability increased.
Solution monitoring u2013 SAP Solution Manager performs centralized, real-time monitoring of systems, business processes, and interfaces, which reduces administration effort. It can even monitor intersystem dependencies. Proactive monitoring helps you avoid critical situations, while automatic notifications enable fast response to issues.
Service-level management and reporting u2013 SAP Solution Manager allows easy definition of service levels and provides automated reporting. Service reporting covers all systems in the solution landscape and provides a consolidated report containing the information you need to make strategic IT decisions.
Service processing u2013 SAP Solution Manager makes appropriate service recommendations and delivers SAP support services. These include SAP Safeguarding, which helps you manage technical risk; SAP Solution Management Optimization, which helps you get the most from your SAP solutions; and SAP Empowering, which helps you manage your solutions.
Administration u2013 Administration tasks are mainly executed locally on the involved systems, but can be accessed and triggered from a central administration console. The administration work center in SAP Solution Manager offers a central entry point and unified access to all SAP technology.
SAP Solution Manager as the name suggests is for managing the whole gamut of SAP and Non-SAP solutions in the IT Landscape of an organisation. It provides you the tool, content and gateway to create, operate, manage and monitor your solutions over time.
It provides a range of scenarios to support this. Extending from project management to Solution Monitoring to Service Desk to E-learning Management, it provides an efficient way to carry out a plethora of business tasks.
SAP Solution Manager is the successor to ASAP ValueSAP. SAP Solution Manager helps in implementing and managing complex system landscapes. Globally systems are getting distributed across geographies and business processes cover more than one system. In such complex scenarios, integrating technical and business requirements is important for the success of IT. SAP Solution Manager provides SAP customers with an efficient means of handling both the technical and business process side of solution implementation .
As part of SAP Solution Management Solutions, the customers receive best practices relating to:
- Global Strategy and Service Level Management
- Business Process Management
- Management of MySAP Technology
- Software Change Management
- Support Desk Management
SAP delivers this using support programs during implementation of the system solution. Some of the benefits of using SAP's Solution Manager are that it helps:
- Manages the technical risk associated with the implementation of the solution ensuring technical robustness
- Helps leverage users core competencies in implementing solutions
- Ensures solution works as intended with best practices built in.
see these links...
http://www.ne-sap-solution-manager.com/
http://www.saptechies.com/category/sap-solution-manager/
thanks
karthik
reward me if usefull

Monitoring services in CSS 11050 using SNMP

Has anyone implemented SNMP monitoring of services for CSS?
How do i go about doing it using HP Openview as the SNMP manager?
I have read the SNMP configuration for CSS but still quite confused about setting the threshold for the RMON alarm. How do you determine what threshold to set to indicate that the service is alive or down??
You might want to refer to the RMON guide for CSS below:
http://www.cisco.com/univercd/cc/td/doc/product/webscale/css/advcfggd/rmon.htm#35012

Hi Matthew,
actually for monitoring services via SNMP you dont need to configure
alarms on the CSS. First, there are default traps generated by the CSS
MIBs. Information can be found here:
http://www.cisco.com/univercd/cc/td/doc/product/webscale/css/advcfggd/snmp.htm#xtocid1874327
There are two traps "Service Down" and "Service Suspended" send to
the preconfigured mgmt station. This can be used to indicate whether
a service is down or not.
Secound, you can poll the state of the existing services by the mgmt
station using the CSS MIBs, this is described here:
http://www.cisco.com/univercd/cc/td/doc/product/webscale/css/advcfggd/snmp.htm#xtocid1874330
Use the svcExt.apSvcState variables to get the states.
If you have any further questions ...
cheers
rene

BI 4.1 monitoring service disabled

Hello,
An error occurs when I want to go to monitoring part of the CMC : "monitoring service is disabled. Only tests are available".
I stop and restart monitoring service without success.
We have a BI 4.1 SP04.
Do you have an idea to solve this issue ?
Thanks for your help.
Antoine

Hi,
Are you using the default Derby DB for monitoring or switched to Audit database in CMC > Applications > Monitoring Application > Properties.
Check attached links.
http://scn.sap.com/community/bi-platform/remote-supportability/blog/2013/06/24/sap-businessobjects-40-monitoring-configuration--part3
http://scn.sap.com/docs/DOC-57584

PE8: Folder Monitoring Service not available?

I've bought the german version of PE 8. It could be a nice program, but there are still some bugs/problems - despite it works *very* slow on my Lenovo W500, 8 GB RAM, 2,8GHZ Dual Core, Windows 7 64.
If I go to "Organizer" and then use the menu "File" -> "Folder monitoring" there comes a message "Der Ordnerüberwachungsservice ist nicht verfügbar" which should mean translated "Folder monitoring service not available" (I hope that this translation is OK?).
I even looked into Windows -> System Control -> Services and searched for a stopped service like that - but I couldn't find any.
Do you have any similar problems or suggestions?
Friendly
Philipp
Lenovo W500, 2,8 Ghz T9600, 8GB RAM, Windows 7 Pro 64-Bit
http://ferienhausbretagne.tumblr.com

I've bought the german version of PE 8. It could be a nice program, but there are still some bugs/problems - despite it works *very* slow on my Lenovo W500, 8 GB RAM, 2,8GHZ Dual Core, Windows 7 64.
If I go to "Organizer" and then use the menu "File" -> "Folder monitoring" there comes a message "Der Ordnerüberwachungsservice ist nicht verfügbar" which should mean translated "Folder monitoring service not available" (I hope that this translation is OK?).
I even looked into Windows -> System Control -> Services and searched for a stopped service like that - but I couldn't find any.
Do you have any similar problems or suggestions?
Friendly
Philipp
Lenovo W500, 2,8 Ghz T9600, 8GB RAM, Windows 7 Pro 64-Bit
http://ferienhausbretagne.tumblr.com

Forefront Endpoint Protection Monitoring Service

Hello,
I just saw that the Forefront Endpoint Protection Monitoring Service is stoppable. I had a virus a few weeks ago on my machine at home that has security essential installed. The virus continually disabled the service. Does it make sense to control the service
via gpo to not make it stoppable even by the system and admin user?
Cheers
Sebastian
Sebastian Bammer

This is old discussion, but let me explain some improvements in Microsoft Anti-Malware Engine. When a program tried to disable any service, process or anything related to Windows Security or Microsoft Anti-Malware Engine , Firewall, etc. It will be detected
as a suspicious behavior and it will be blocked (no matter whether it is known malware or unknown program). In case of unknown program, you might be asked to send more details or submit it to Microsoft Malware Protection Center.
In addition, in Windows Vista and later version of Windows such as Windows 7, Windows 8.x when you have User Account Control (UAC), all programs run as an standard user unless you grand them permission as administrator. So by default, if a program tried
to disable any Security related service in Windows is unable to that because it won't run as administrator and is unable to perform something which runs as administer unless, if you are in administrator account and UAC is off or you grand administrator privilege
to the program (e.g. right click and run as administrator).
However, if you still face any programs which might try to disable services and it won't block by FEP , Microsoft Security Essentials or other Microsoft Anti-Malware products, you could submit it sample to Microsoft Malware Protection Center for more analysis.

Plan Monitoring service is missing

Dear all
I am very new to BAM
windows 2003 and Oracle 10G DB and Bam 10.1.3.1.0
i have install Bam and also Enterprise Link
all the services are running listed below
1. OracleTNSListener
2. OracleService (Database)
3. Oracle BAM Data Flow Service
4. Oracle BAM Active Data Cache Service
5. Oracle BAM Report Cache Service
6. Oracle BAM Event Engine Service
7. Oracle BAM Plan Monitor Service
only 7th service is missing now please let me know what steps should i take ...to see this service.......running.........
CHeers

Dear all
I am very new to BAM
windows 2003 and Oracle 10G DB and Bam 10.1.3.1.0
i have install Bam and also Enterprise Link
all the services are running listed below
1. OracleTNSListener
2. OracleService (Database)
3. Oracle BAM Data Flow Service
4. Oracle BAM Active Data Cache Service
5. Oracle BAM Report Cache Service
6. Oracle BAM Event Engine Service
7. Oracle BAM Plan Monitor Service
only 7th service is missing now please let me know what steps should i take ...to see this service.......running.........
CHeers

Monitoring Services, Service Dependencies

Hi all,
 
I'm looking for a general solution to the following (I suppose rather common) problem:
 
 
Our system depends on a lot of services/ressources like the network/internet connectivity, sql database, other hosts, web services, file servers, JMS Queues etc. Obviously it is possible that one or more services is not available at some time, be it scheduled (maintenance/backup/reboot...) or unexpected (server crash...).
 
 
Whether a ressource is available or not can be determined by the application itself (e.g. when catching an IOException), a separate monitoring tool (e.g. nagios) or the administrator.
 
 
Some services depend on other services, e.g. a JMS queue (Resource "QUEUE) which can only be processed if a third-party Ressource ("HOST") host is available. This means that if the ressource "HOST" is marked as down, the resource "QUEUE" should be suspended until "HOST" is up again.
 
 
It is possible of course, to code such stuff manually, but it looks cumbersome, and since this is rather a general purpose problem, I'd expect a java standard to be out in the wild.
 
 
However, I cannot find such a thing. Any suggestions ? Is JMX the way to go ? Or some SNMP stuff ?

You might want to take a look at JMX Monitor Services. There's nothing out of the box that will meet all of your criteria though.

Microsoft Azure Monitoring Services Management Library stable release date

With the general availability of autoscale and the Microsoft Azure Management Libraries, what's the timeline on the general availability of Microsoft Azure Monitoring Services Management Library? Is there an estimated release date for v1.0?

We have the preview release for the API/REST and a Nuget package
REST/API
http://msdn.microsoft.com/en-us/library/azure/dn510374.aspx
Nuget
http://www.nuget.org/packages/Microsoft.WindowsAzure.Management.Monitoring/0.10.0-preview
Johnny Coleman [MSFT] Any code posted to this Forum is [As-Is] With No Warranties

NSM 3.0.4 Event Monitor Service

NSM AD 3.0.4 on W2008
This install has been running fine for months. Now the Event Monitor service will not start. Does anyone have any ideas on what might be the cause? Suggestions on a fix?
Mike

On 2/14/2013 6:10 PM, mfruech wrote:
>
> NSM AD 3.0.4 on W2008
>
> This install has been running fine for months. Now the Event Monitor
> service will not start. Does anyone have any ideas on what might be the
> cause? Suggestions on a fix?
>
> Mike
>
>
Mike,
Does the Event Monitor log file show anything? You should be able to see
where the Event Monitor starts by looking at the log's timestamps
(there's a large blob of XML at that timestamp too), and what follows is
a sequence of checks making sure the service can start up correctly with
all its appropriate dependencies. Anything with a 'Result = ' or 'rc='
followed by a non-zero number is potentially a problem. Let us know what
those are, and we can troubleshoot the Event Monitor from there. Thanks!
- NFMS Support Team

Registry Monitor service signficant​ly impacting startup performanc​e

Similar Messages

Maybe you are looking for

Registry Monitor service signficantly impacting startup performance