Registry setting are missing. Already installed 7.02.

I've reinstalled iTunes software. Error message states "This can happen as a result of installing other CD burning SW. Please reinstall iTunes". Now what?

b noir, I have been tracking this thread on several posts regarding issues with CD burn. Help Please. I installed the new version of Nero, I now receive the error message from the itunes setup assistant "warning, the registry settings used by the iTunes drivers for importing and burning CDs and DVDs are missing..." I DID the regedits on the filters w/o success. In fact, Nero detects these mods and states the regedites will be changed during the next reboot. However, I still get theis same error during the current session, I have run numerous reairs & reinstalss of itunes and even updated the drivers for my computer w/o success. Spinning my wheels here. I CAN burn CDs fine using Nero in my Audible (audio book) software. Any vectors please! Diagnostics:
Microsoft Windows XP Home Edition Service Pack 2 (Build 2600)
Sony Corporation PCV-RX670(UC)
iTunes 7.0.2.16
CD Driver 2.0.6.1
CD Driver DLL 2.0.6.1
Video Driver: NVIDIA RIVA TNT2 Model 64 (Sony)\RIVA TNT2 Model 64
Found aspi32 running.
IDE\DiskMaxtor4D080H4_________________________DAH017K0, Bus Type ATA, Bus Address [0,0]
IDE\DiskMaxtor6Y160P0_________________________YAR41BW0, Bus Type ATA, Bus Address [1,0]
GenDisk, Bus Type UNKNOWN
SCSI\DiskMaxtor6Y080L0_________YAR4, Bus Type SCSI, Bus Address [1,0]
USBSTOR\DiskHP_____Photosmart_84001.00, Bus Type USB
USBSTOR\DiskTOSHIBAMK8032GAX______0000, Bus Type USB
IDE\CdRomASUSCD-S400/A__________________________2.1N___
IDE\CdRomPIONEERDVD-RW__DVR-104_________________1.40___
If you have multiple drives on the same IDE or SCSI bus, these drives may interfere with each other.
Current user is an administrator.
Failed loading CD / DVD drives, error -43. Try doing a repair install on iTunes from the "Add or Remove Programs" control panel.
The last failed audio CD burn had error code -128(0xffffff80). It happened on drive F: PIONEER DVD-RW DVR-104 on CDR media at speed 0X.

Similar Messages

Registry entries are missing, re-install Itunes

When I start Itunes, I get a message stating that the registry entries are missing and to reinstall Itunes. My Itunes player still works...if I reinstall Itunes, what happens to purchased music? will they recover automatically or do I have to manually find .m4p files?
thanks

When I start Itunes, I get a message stating that the registry entries are missing and to reinstall Itunes.
Hi Scott!
could you let us know precisely what that error message was saying? sometimes it's easiest to send us a screenshot of the error message box. there's instructions on how to do that given here:
Hudgie, "Taking screenshots to help with problems.", 12:04pm Apr 19, 2005 CDT
love, b

I keep getting the message that my registry settings are missing for importing and burning cd's and dvd's. Why?

I keep getting the message that my registry settings are missing for importing and burning cd's and dvd's. Why?
I've completely uninstalled iTunes per the support instructions and reinstalled. But I still get the error message each
time I click on the iTunes icon. I went into iTunes support and searched for registry settings and got an error message 404.
It was no help.

Hey JWeaver208,
Thanks for the question, and great troubleshooting so far. If you continue to see this message after uninstalling and re-installing iTunes, you may need to install the device filter in the Windows registry, as outlined in this resource:
iTunes for Windows: "Registry settings" warning when opening iTunes
http://support.apple.com/kb/TS3299
Thanks,
Matt M.

My iTunes is telling me that the registry settings are missing for importing and burning cd's and dvd's and to reinstall. I do reinstall and it is still not there and I have at least 4 times.

My iTunes is telling me that the registry settings are missing for importing and burning cd's and dvd's. I have installed the latest up as well as uninstalled and then reinstalled a few times, at least 4. The registry settings are still not there and I cannot burn to a cd. HELP!!!

To fix registry, refer to this article:
iTunes for Windows: "Registry settings" warning when opening iTunes
http://support.apple.com/kb/TS3299

Upon opening Itunes I get a warning that my registry settings are missing

When I open Itunes I get a warning message that my registry settings are missing. How can I fix this?

(Apologies for butting in, wha.)
I'd start with the following document, with one modification. At step 12 after typing GEARAspiWDM press the Enter/Return key once prior to clicking OK. (Pressing Return adds a carriage return in the field and is important.)
iTunes for Windows: "Registry settings" warning when opening iTunes

HT4972 my ipod setting are missing softwhere update and it takes time to do from computer what do i do my ipod is 3g and i want ios 5?

my ipod setting are missing softwhere update and it takes time to do from computer what do i do my ipod is 3g and i want ios 5?

Until your iPod Touch is using iOS 5 or higher there is no way to upgrade without using iTunes on your syncing computer.

Registry setting drivers missing

A couple of days ago I turned on my computer and clicked on the iTunes icon. This popped up:
The registry settings used by the iTunes drivers for importing and burning CDs and DVDs are missing. This can happen as a result of installing other CD burning software.
Only, I haven't downloaded any programs recently, and none of them are CD burning software. Once I hit the x at the top right corner or OK at the bottom of the window, iTunes pops up and I can listen to music - I just can't import anything or create CDs.
How do I reinstall the drivers? I've looked all OVER Apple's site and support finding nothing about this, and I couldn't figure out how to write to them about this problem.
If I have to delete iTunes and reinstall it, will I have to redo the playlists and folders, or will they come back up?
Thanks for the help!

I have the same issue as TS1436 & saw your reply/solution above... I'm your average non-tech casual ITunes user, so the # of issues re: uninstall/reinstall & problems this so often creates looks more than a little frustrating. I've already had to uninstall ITunes once for a different issue; after reading the doc you reference, it appears that was possibly the cause of the PC then not recognizing the CD/DVD drive, meaning I had to reload those drivers, which led to the current problem with ITunes & now another uninstall/reinstall. Seems new software shouldn't be this hard or time-consuming. OK, no more complaining, sorry...
I have 2 questions:
1) Rather than do an uninstall/reinstall, is it easier to just skip that step and follow the doc you reference for manually installing the device filter to ITunes? (using Windows 7)
2) I have lots of space & my ITunes library is small (new PC). For the purpose of just getting through this uninstall process, can I just temporarily backup a copy of the library to another file on the hard drive (as opposed to an external drive)? I understand there's a risk if the system crashes, but that seems unlikely (i hope!)
Thanks for your help...

Registry settings are missing

The following is the message I am getting when I start Itunes. I have remove and reinstall itunes to no avail please help daughter got new ipod and wants to play with it.
"The registry settings used by itunes fot importing and burning cds and DVD are missing. This can happen as a result of installing other CD burning software. please reinstall itunes."

Refer to this article:
iTunes for Windows: "Registry settings" warning when opening iTunes
http://support.apple.com/kb/TS3299

I get an alert about the registry settings are missing and to reinstall iTunes. It did that and still get the warning. ITunes won't recognize my iPhone as a result.

I get an alert saying "The registry settings used by the iTunes drivers for importing and burning CDs and DVDs are missing. This can happen as a result of installing other CD burning software. Please reinstall iTunes." I reinstalled iTunes, restarted pc, and I checked what other CD/DVD burning software by searching on DVD. Results: Cyberlink DVD suite deluxe, HP Smartmedia DVD , and Windows DVD Maker, all of which I've had forever. Should I delete these and try to reinstall iTunes again? Are there other reasons that this message pops up?

Got the same Pop-up and Apple Sppt told me that UNinstalling Quicktime had fixed this issue in most other cases. I asked IF I had to start over with Uninstalling iTunes, and she answered Yes.
Read my too-long thread (below) that has an Apple Sppt link at the start about Manual Deletes of several Apple Folders/files being a Key to a proper Uninstall / Re-install of iTunes.
Do as much as you want but this is what experience led me to so far. We haven't done it yet since the iPhone Sync'd OK and CD burning is not a priority.
https://discussions.apple.com/thread/5901869

Some Gnome icons (title bar) are missing (fresh install)

I've just installed Arch base and base-devel (64 bits), intel-ucode, xorg, nvidia driver, gnome and started gdm:
http://i.imgur.com/zPJ0g30.png
This is the console output:
(nautilus:1436): Gtk-CRITICAL **: gtk_icon_theme_get_for_screen: assertion 'GDK_IS_SCREEN (screen)' failed
(nautilus:1436): GLib-GObject-WARNING **: invalid (NULL) pointer instance
(nautilus:1436): GLib-GObject-CRITICAL **: g_signal_connect_object: assertion 'G_TYPE_CHECK_INSTANCE (instance)' failed
And journalctl:
may 24 14:54:44 Arch-Gnome gnome-session[641]: (gnome-shell:706): Gtk-CRITICAL **: gtk_icon_info_load_symbolic_for_context: assertion 'icon_info != NULL' failed
may 24 14:54:44 Arch-Gnome gnome-session[641]: (gnome-shell:706): Gdk-CRITICAL **: gdk_cairo_surface_create_from_pixbuf: assertion 'GDK_IS_PIXBUF (pixbuf)' failed
may 24 14:54:45 Arch-Gnome gnome-session[641]: (gnome-shell:706): Gtk-CRITICAL **: gtk_icon_info_load_symbolic_for_context: assertion 'icon_info != NULL' failed
may 24 14:54:45 Arch-Gnome gnome-session[641]: (gnome-shell:706): Gdk-CRITICAL **: gdk_cairo_surface_create_from_pixbuf: assertion 'GDK_IS_PIXBUF (pixbuf)' failed
may 24 14:54:45 Arch-Gnome gnome-session[641]: (gnome-shell:706): Gtk-CRITICAL **: gtk_icon_info_load_symbolic_for_context: assertion 'icon_info != NULL' failed
may 24 14:54:45 Arch-Gnome gnome-session[641]: (gnome-shell:706): Gdk-CRITICAL **: gdk_cairo_surface_create_from_pixbuf: assertion 'GDK_IS_PIXBUF (pixbuf)' failed
may 24 14:54:46 Arch-Gnome gnome-session[641]: (gnome-shell:706): Gtk-CRITICAL **: gtk_icon_info_load_symbolic_for_context: assertion 'icon_info != NULL' failed
may 24 14:54:46 Arch-Gnome gnome-session[641]: (gnome-shell:706): Gdk-CRITICAL **: gdk_cairo_surface_create_from_pixbuf: assertion 'GDK_IS_PIXBUF (pixbuf)' failed
may 24 14:54:47 Arch-Gnome gnome-session[641]: (gnome-shell:706): Gtk-CRITICAL **: gtk_icon_info_load_symbolic_for_context: assertion 'icon_info != NULL' failed
may 24 14:54:47 Arch-Gnome gnome-session[641]: (gnome-shell:706): Gdk-CRITICAL **: gdk_cairo_surface_create_from_pixbuf: assertion 'GDK_IS_PIXBUF (pixbuf)' failed
I've notice a strange behaviour in GDM login, too. The first time I put my password and try to log in doesn't happen anything. I have to press "Cancel" button and try again, then successfully.
may 24 14:35:26 Arch-Gnome gdm-password][620]: pam_unix(gdm-password:auth): conversation failed
may 24 14:35:26 Arch-Gnome gdm-password][620]: pam_unix(gdm-password:auth): auth could not identify password for [yorick]
may 24 14:35:26 Arch-Gnome gdm-password][620]: gkr-pam: no password is available for user
may 24 14:35:29 Arch-Gnome gdm-password][623]: pam_unix(gdm-password:session): session opened for user yorick by (uid=0)

Same problem here. However this https://bbs.archlinux.org/viewtopic.php?id=178290 fixed my system ( I also had error messages from journalctl related to svg format not recognized). As the thread says, I basically just had to reinstall a package with "pacman -S gdk-pixbuf2" and then everything worked. I don't know why, because that packaged was already installed.
Last edited by andrea89g (Yesterday 09:30:10)

Quick time components are missing re install iMovie

Good day,
when I try to import a movie from my camera I get a message indicating that certain quicktime components are missing and I should reinstall i movie. How can I reinstall imovie alone ?
Thank you

From your iLife '08 DVD?

What can I do after receiving the error message: registry settings of itunes drivers are missing?

After starting the newly installed itunes the following error message appears: registry settings of itunes drivers to import and burn CDs and DVDs are missing. Install itunes newly. Does not help- I did i twice. what shall I do?
in addition my iphone is not recognized when I branch it via USB port to my notebook. Is this related to the error as indicated ?

I'd start with the following document, with one modification. At step 12 after typing GEARAspiWDM press the Enter/Return key once prior to clicking OK. (Pressing Return adds a carriage return in the field and is important.)
iTunes for Windows: "Registry settings" warning when opening iTunes

ITunes says registry settings for importing and burning CDs or DVDs are missing.

i get a message after installing itunes 10.7 that registry settings are missing for importing and burning CD/DVDS. Says probably due to installing other burning sofware. Re-install ituenes. I never installed anything between the older 10.6 and the new 10.7........just updated when it said new Apple software was available. The update process seemed to delete the 10.6 install and then re-install a new version of itunes, 10.7. Then the registry settings error message started coming up each time I start itunes. What's the proper way to re-install?
Thanks for any suggestions.

I'd start with the following document, with one modification. At step 12 after typing GEARAspiWDM press the Enter/Return key once prior to clicking OK. (Pressing Return adds a carriage return in the field and is important.)
iTunes for Windows: "Registry settings" warning when opening iTunes

What is font book used for? I read the description but still unsure. Does it contain fonts that are not already on the computer

What can I use font book for? I read the description but still don't get it. Does it contain fonts that are not already installed on my new Mac? Thanks.

Disabling (turning off) a font will make it unavailable for use in any font menu. You can alwasy enable the font(s) again - they're not gone permanantly. DON'T disable System fonts, though -> that's just asking for trouble.
Here's -> https://www.youtube.com/watch?v=JdR6-4lnF5A - a good video tutorial about using Font Book.
Clinton

CC Typekit Fonts "already installed" error

After syncing typekit fonts for desktop use, they show in Creative Cloud under the "fonts" tab, but some with the error "A font with the same name is already installed". Of course they are not already installed as they have only been obtained via Typekit.
The only way to get rid of this annoying error message this is to remove them via manage fonts and the add them again via Typekit. Then it's good for a few days until the error comes back again. Annoying.

Hi Dv8kiwi,
Please follow the troubleshooting steps described here:
http://help.typekit.com/customer/portal/articles/1146005-error-message-%22a-font-with-the- same-name-is-already-installed-%22
-Dave

Registry setting are missing. Already installed 7.02.

Similar Messages

Maybe you are looking for