Registry Settings for Itunes drivers for Importing and burning CDs and DVDs

I have had this issue over and over again and re installed and uninstalled many times. Recently I upgraded to Windows 7 and for a very short time had no issues. I could burn CDS and back up and did not receive the error message on loading ITunes Setup Assistant "Warning The registry settings used by Itunes drivers for importing and burning cd's and dvd's are missing. This can happen as a result of installing other cd burning software. Pleae re install Itunes." Unfortunatley I then installed DVD Fab and this issued started again. I tried to restore my pc and uninstalled DVD fab and have no other burn software on my pc and still cant get working. I still get the same error when trying to burn a playlist "no disc recording found". Please advise what I need to do in lamen's terms. Much appreciated.

have you followed instructions also on question number 11 and 12? because u told me that you have printed and i guess it only showed the words. ok. leave itunes installed and follow the >Registry instructions< also when you get to number 11 and 12 instructions, drop them down and follow them. and also follow the rest till it tells you to restart.

Similar Messages

  • Registry settings by itunes drivers for importing and burning cd's and dvd's are missing

    I have been getting a message that the registry settings used by the iTunes drivers for importing and burning CD's and DVD's are missing.  I have not added any new software that would create this problem.
    Does anyone have a solution?

    I'd start with the following document, with one modification. At step 12 after typing GEARAspiWDM press the Enter/Return key once prior to clicking OK. (Pressing Return adds a carriage return in the field and is important.)
    iTunes for Windows: "Registry settings" warning when opening iTunes

  • What can I do after receiving the error message: registry settings of itunes drivers  are missing?

    After starting the newly installed itunes the following error message appears: registry settings of itunes drivers to import and burn CDs and DVDs are missing. Install itunes newly. Does not help- I did i twice. what shall I do?
    in addition my iphone is not recognized when I branch it via USB port to my notebook. Is this related to the error as indicated ?

    I'd start with the following document, with one modification. At step 12 after typing GEARAspiWDM press the Enter/Return key once prior to clicking OK. (Pressing Return adds a carriage return in the field and is important.)
    iTunes for Windows: "Registry settings" warning when opening iTunes

  • When starting iTunes I continually get an error message " The registry Settings used by the iTunes drivers for importing and burning CDs and DVDs are missing.  This can happen as a result of installing other CD burning software. Please reinstall iTunes."

    When starting iTunes I continually get an error message " The registry Settings used by the iTunes drivers for importing and burning CDs and DVDs are missing.  This can happen as a result of installing other CD burning software. Please reinstall iTunes."  I have unistalled and reinstalled iTunes several times and have cleaned up the registry using a 3rd party Windows utility.  Any tips on removing this error message for good?

    I'd start with the following document, with one modification. At step 12 after typing GEARAspiWDM press the Enter/Return key once prior to clicking OK. (Pressing Return adds a carriage return in the field and is important.)
    iTunes for Windows: "Registry settings" warning when opening iTunes

  • Received this error message when starting iTunes and reinstalling does not resolve it:  The registry settings used by iTunes drivers for importing and burning CDs and DVDs is missing.

    Received this error message when starting iTunes and reinstalling does not resolve it:  The registry settings used by iTunes drivers for importing and burning CDs and DVDs is missing...
    Can I uninstall existing iTunes without losing my media library?  and then install fresh to fix this problem?

    Hi there kweitkamp,
    You may find the troubleshooting steps in the article below helpful.
    iTunes for Windows: "Registry settings" warning when opening iTunes
    http://support.apple.com/kb/TS3299
    -Griff W. 

  • When i click on itunes to open, message says: the registry settings used by the itune drivers for importing and burning cds and dvds are missing. this can result from installing other cd burning software. Reinstall itunes.  I'm inexperienced. Please help

    When I click on itunes, I get a message that says, "the registry settings used by the itune drivers for importing and burning cds and dvds are missing.  this can result from installing other cd burning software.  Reinstall itunes."  I am a really inexperienced computer user. My computer is a windows 7.  Would someone please walk me through this or tell me where to find information on how to do this. Thanking in advance, Laurie

    Check out this Apple article -> iTunes for Windows: "Registry settings" warning when opening iTunes
    The article will walk you through reinstalling iTunes and then checking for or creating device filters. Did it help? Did you run into any problems?

  • Error msg at launch says "Registry settings used by the iTunes drivers for importing and burning CDs and DVDs are missing. ... Please reinstall iTunes."

    Each time I launch iTunes (latest version) on Windows 7 (w/ latest system updates) I receive the following error msg:
    "Warning! The registry settings used by the iTunes drivers for importing and burning CDs and DVDs are missing.  This can happen as a result of installing other CD burning software.  Please reinstall iTunes."
    When I click on "OK" iTunes completes the launch process and the application functions properly.  This error msg appears without fail every time I launch the app.
    I have reinstalled iTunes four times and continue to receive this message.  iTunes is set in the system Control Panel as the default program for all functions that iTunes uses.  I never burn CDs or DVDs and have never attempted to do so on this machine.  I have had iTunes on this computer since I bought it last November and never had a problem with it until 2 months ago when this message began popping up.  I did not notice any action I took that caused this, in terms of creating conflicts.
    I hope someone can assist me in finding a way to stop this annoying error!  Thanks!
    David

    I'd start with the following document, with one modification. At step 12 after typing GEARAspiWDM press the Enter/Return key once prior to clicking OK. (Pressing Return adds a carriage return in the field and is important.)
    iTunes for Windows: "Registry settings" warning when opening iTunes

  • The registry settings used by the iTunes drivers for importing and burning CDs and DVDs are missing

    Error on Itunes start-up.  Must click OK before Itunes will start.
    The registry settings used by the iTunes drivers for importing and burning CDs and DVDs are missing.  This can happen as a result of installing other CD burning software.  Please reinstall iTunes.
    I have reinstalled iTunes using their complete uninstall instructions.
    iTunes does seem to work after OK is clicked, I'm just tired of having to hit OK.
    Other thoughts...  This started after the iTunes update required to go to IOS 6 for my devices.  I'm able to sync my devices. It is possible that ZoneAlarm (my Antivirus and Firewall) got in the way at install.  It flagged something and I denied it.  I was doing multiple things at the time and the flag did not have any indication about iTunes.  I have tried shutting down ZoneAlarm for the install and that has not helped either.
    Will try another full uninstall that includes uninstalling ZoneAlarm...

    I'd start with the following document, with one modification. At step 12 after typing GEARAspiWDM press the Enter/Return key once prior to clicking OK. (Pressing Return adds a carriage return in the field and is important.)
    iTunes for Windows: "Registry settings" warning when opening iTunes

  • What can I do to correct this error: The registry settings used by the iTunes drivers for importing and burning CDs and DVDs are missing.  The drive works fine when I burn a CD using Media Player.

    What can I do to correct this error: The registry settings used by the iTunes drivers for importing and burning CDs and DVDs are missing. This can happen as a result of installing other CD burning software.  Please reinstall iTunes.  I have reinstalled several times but it hasn't changed this error message.  Why am I able to burn a CD using Media Player but not iTunes?  I am using Windows XP and I have burned cds from iTunes in the past.

    1: Follow this support doc to completly remove iTunes (your files remain)
    http://support.apple.com/kb/ht1925
    2: Download, install and run the Registry cleaner portion of the free Ccleaner
    http://www.filehippo.com/download_ccleaner
    3: Reinstall iTunes

  • HT203242 I get this error when launching itunes "the registry settings used by the itunes drivers for importing and burning CDs and DVDs are missing." I ahve reinstalled iTunes multiple times but the issue remains.....any suggestions?

    I get this error when launching itunes "the registry settings used by the itunes drivers for importing and burning CDs and DVDs are missing." I ahve reinstalled iTunes multiple times but the issue remains.....any suggestions?

    I'd start with the following document, with one modification. At step 12 after typing GEARAspiWDM press the Enter/Return key once prior to clicking OK. (Pressing Return adds a carriage return in the field and is important.)
    iTunes for Windows: "Registry settings" warning when opening iTunes

  • HT201413 The registry settings used by the iTunes drivers for importing and burning CDs and DVDs are missing.  Do I have to uninstall before I re-install iTunes?

    Note I am receiving when opening up iTunes:  The registry settings used by the iTunes drivers for importing and burning CDs and DVDs are missing.  This can happen as a result of installing other CD burning software.  Please reinstall iTunes.
    Question:  Do I have to uninstall iTunes and then reinstall?  I am a little hesitant to do this!
    Noelyn

    Hi for the message error "Warning! The registry settings used by the iTunes drivers for importing and burning CDs and DVDs are missing. This can happen as a result of installing other CD burning software. Please reinstall iTunes."
    Here are the resolutions I found and it fix the problem for me.
    Resolution
    iTunes installs a device filter which helps it work with your optical drive. If this device filter is missing, you will see the message mentioned above. To resolve this issue, reinstall iTunes to put the device filter back in place. To reinstall iTunes, follow the steps in the article below appropriate to your OS:
    HERE http://support.apple.com/kb/HT1923
    If you still get the pop up error "Warning! The registry settings used by the iTunes drivers for importing and burning CDs and DVDs are missing. This can happen as a result of installing other CD burning software. Please reinstall iTunes."
    Do this
    http://support.apple.com/kb/TS3299
    Good luck!
    B

  • HT1926 "Registry settings usef my ITune drivers for importing and burning CDs and DVDs are missing." I have reinstalled Itunes and still get the same message.  What should I do.  bkgee

    "Registry settings used by ITune drivers for importing and burning CDs and DVDs are missing."  I have reinstalled ITunes but still get the same message.  What should I do?  bkgee

    I'd start with the following document, with one modification. At step 12 after typing GEARAspiWDM press the Enter/Return key once prior to clicking OK. (Pressing Return adds a carriage return in the field and is important.)
    iTunes for Windows: "Registry settings" warning when opening iTunes

  • When opening iTunes, I get the following error message: the registry setting used by the iTunes drivers for importing an burning CDs and DVDs are missing.  This can happen as a result of installing other CD burning software.  Please reinstall iTunes.

    When opening iTunes, I get the following error message: "The registry setting used by the iTunes drivers for importing an burning CDs and DVDs are missing.  This can happen as a result of installing other CD burning software.  Please reinstall iTunes."
    I have reinstalled iTunes twice and still get the message.
    Any clues??
    Thank you.

    I'd start with the following document, with one modification. At step 12 after typing GEARAspiWDM press the Enter/Return key once prior to clicking OK. (Pressing Return adds a carriage return in the field and is important.)
    iTunes for Windows: "Registry settings" warning when opening iTunes

  • When I attempt to log on to I tunes I get the following message  "The registry settings used by the I tunes drivers for importing and burning CDs and DVDs are missing  This can happen as a result of installing other CD burning software  Please reinstall

    When I attempt to log on to I tunes I get the following message:
    "The registry settings used by the I Tunes drivers for importing and burning CDs and DVDs are missing.
      This can happen as a result of installing other CD burning software. Please re-install I Tunes."
    To my knowledge no new software has been installed.  I have tried un-installing and re-installing I Tunes but I still
    get the same message.
    Can anyone offer any suggestions?  Do I need to download a new driver?
    Bill Martin

    I can get down as far as step 11 but it shows nothing about upper filters and when I type on "If the Upper Filters entry is missing follow these instructions" nothing happens
    Do you mean you can't see the instructions on what to do if there is no UpperFilters entry?
    If so, here's the relevant instructions for that step:
    On the right side of the Registry Editor window, right-click the UpperFilters entry and choose Modify from the shortcut menu.
    Right-click the empty white space within the right-hand portion of the Registry Editor window. From the shortcut menu, choose New > Multi-String Value.
    Name this new value "UpperFilters" (without the quotes). Then, right-click the newly created UpperFilters entry and choose Modify from the shortcut menu.

  • I just installed the latest version of iTunes, but when I went to open iTunes I got a message saying registry settings used to for importing and burning CDs and DVDs are missing and I should reinstall iTunes.  Really?

    I just installed the latest version of iTunes, but when I went to open iTunes I got a message saying registry settings used to for importing and burning CDs and DVDs are missing and I should reinstall iTunes.  Really?

    I'd start with the following document, with one modification. At step 12 after typing GEARAspiWDM press the Enter/Return key once prior to clicking OK. (Pressing Return adds a carriage return in the field and is important.)
    iTunes for Windows: "Registry settings" warning when opening iTunes

  • ITunes drivers for importing and burning CDs and DVDs are missing

    Hi,
    I recently switched from a relatively small drive to a much larger one and had the larger drive taking image of the older drive.  All of my older programs are now back up to working but I can still can't burn a CD.
    I get the following error message "the registry settings used by the iTunes drivers for importing and burning CDs and DVDs are missing.  This can happen as a result of installing other CD burning software.  Please reinstall iTunes."
    I have reinstalled iTunes a few times and have done soft and hard reboots but still no luck.  Any ideas on the simplest way to resolve this matter?
    Thank you
    this is the result of the diagnostic:
    Microsoft Windows 7 x64 Home Premium Edition Service Pack 1 (Build 7601)
    System manufacturer System Product Name
    iTunes 11.3.0.54
    QuickTime 7.7.5
    FairPlay 2.6.12
    Apple Application Support 3.0.5
    iPod Updater Library 11.1f5
    CD Driver 2.2.3.0
    CD Driver DLL 2.1.3.1
    Apple Mobile Device 7.1.2.6
    Apple Mobile Device Driver 1.64.0.0
    Bonjour 3.0.0.10 (333.10)
    Gracenote SDK 1.9.6.502
    Gracenote MusicID 1.9.6.115
    Gracenote Submit 1.9.6.143
    Gracenote DSP 1.9.6.45
    iTunes Serial Number 0031B3A80E383418
    Current user is not an administrator.
    The current local date and time is 2014-08-26 07:06:48.
    iTunes is not running in safe mode.
    WebKit accelerated compositing is enabled.
    HDCP is supported.
    Core Media is supported.
    Video Display Information
    NVIDIA, NVIDIA GeForce GTX 570
    **** External Plug-ins Information ****
    No external plug-ins installed.
    iPodService 11.3.0.54 (x64) is currently running.
    iTunesHelper 11.3.0.54 is currently running.
    Apple Mobile Device service 3.3.0.0 is currently running.
    **** CD/DVD Drive Tests ****
    No drivers in LowerFilters.
    No drivers in UpperFilters.
    Failed loading CD / DVD drives, error -43. Try doing a repair install on iTunes from the “Add or Remove Programs” control panel.

    You posted here -->    Apple Support Communities  /  iTunes  /  iTunes for Mac
    I will request this be moved.

Maybe you are looking for

  • Dhcpcd giving 169 IP address

    I just got back to school. At home I was using my desktops wired connection just fine. When I got back to school I booted up my machine and tried to do a dhcpcd eth0 but the broadcasting for a lease times out and then I end up with a 169 IP. I've tri

  • Local Adjustment Brush - create a line

    Hey everyone, I thought that in Lightroom 2, you could use the local adjustment brush, click on an area, then hold down ctrl key, click another area, and a line would be drawn between the two points.  How do you do it in Lightroom 3?  Am I mistaking

  • Calling ActiveX from WebDynpro ABAP application

    Hello everyone, I am looking for the possibility of calling an ActiveX control based application by extending my Web Dynpro ABAP application. Is this possible at all? Thanks, Amber Message was edited by: Amber Gupta

  • Do I have to buy Logic pro 7 ($700) before I buy crossgrade

    I am doing this so it works on my macbook pro. Can I just buy the logic pro 7.2 version crossgrade upgrade?

  • Extrcting the data used for building a Dshboard in Xcelsius to internl tabl

    Hi, Is there a way to get the data present in an Xcelsius dashboard back to an internal table? I know its pretty complicated. But is there any way in which I can get the data that is finally used to build a dashboard using ABAP? Thanks, Mahesh M.S.