Registry settings problem...upper and lower filters missing!?

Hi there.
I'm experiencing what seems to be a common problem - missing registry files for burning CDs in itunes. The warning dialog box comes up when i load itunes.
I have the current version of itunes.
My driver's firmware is up to date.
I found and then began to follow the matching support instructions for this problem at the following page:
http://support.apple.com/kb/TS2372
when I got to step 11 and the lower filter was missing, I didn't worry too much...but then I went to the next step and found that I don't have the upper filters either!
So now I have to solve this second problem first before I can tackle the first...any help would be very much appreciated.
cheers, justin.

Someone posted this on missing the upper filter entry recently:
http://discussions.apple.com/message.jspa?messageID=8138108#8138108
I haven't tried it myself and be careful if you decide to try it as it involves editing the registry.

Similar Messages

"registry settings for importing and burning are missing..."

I have installed itunes and the appropriate quicktime, but am not able to import any music. When I put cds in the drive, they do not even show up. I'm not sure if there is some other program blocking this importing or showing up of cds, but I get a message that says,
"the registry settings used by the itunes drivers for importing and burning CDs and DVDs are missing. This can happen as a result of installing other CD burning software. Please reinstall Itunes."
However, the reinstalling doesn't fix it, and I'm not sure what to change or fix about the other cd player/burners on my computer to make itunes work properly (the laptop is new, and came with windows media, jukebox, etc...). How do I make itunes the default cd burner? Or how do I fix this problem otherwise?
Thanks.
Dell Windows XP

No problem:
Microsoft Windows XP Professional Service Pack 2 (Build 2600)
Dell Inc. MM061
iTunes 6.0.5.20
CD Driver 2.0.4.3
CD Driver DLL 2.0.3.2
LowerFilters: PxHelp20 (2.0.0.0), drvmcdb (1.0.0.1), sscdbhk5 (1.0.0.1),
Video Driver: ATI Mobility Radeon X1300\ATI Mobility Radeon X1300
IDE\DiskWDCWD1200BEVS-75LAT0__________________02.06M02, Bus Type ATA, Bus Address [0,0]
USBSTOR\DiskApple__iPod___________1.62, Bus Type USB
IDE\CdRomNEC_DVD+-RW_ND-6650A___________________102C___, Bus Type ATA, Bus Address [0,0]
If you have multiple drives on the same IDE or SCSI bus, these drives may interfere with each other.
Some computers need an update to the ATA or IDE bus driver, or Intel chipset. If iTunes has problems recognizing CDs or hanging or crashing while importing or burning CDs, check the support site for the manufacturer of your computer or motherboard.
Current user is administrator.
Failed loading CD / DVD drives, error -43. Try doing a repair install on iTunes from the "Add or Remove Programs" control panel.

Remove upper and lower filters for portable devices?

My flash drive was used to download 2 movies- it is 16 GB- but I can not delete the movies to make room for anything else on the drive it keeps saying "write protected". I did not do this, the movies were downloaded from off the internet, how
can I unprotect this media to delete it?
Tony A. Smith,III.

Try looking for a sliding switch on the flash drive. Some flash drives have this switch to provide write protection for the contents and it can be easy to accidentally enable it.
In the image below you can see a slider on the side of the drive that can move between a lock symbol and an unlocked symbol.
If this does not help try reading
http://www.makeuseof.com/tag/how-to-fix-write-protection-errors-on-a-usb-stick/

Itunes 11.2.2.3 registry settings used by itunes drivers are missing?

Already uninstalled and reinstalled. Added upper and lower filters but still CANNOT burn cds.

Hello AlkieisOne,
Thank you for contacting Apple Support Communities.
You can take a look at this article for your issue:
iTunes for Windows: "Registry settings" warning when opening iTunes
http://support.apple.com/kb/TS3299
Regards,
Jeff D.

I have uninstalled and reinstalled iTunes several times, but keep getting an error message that "the registry settings for importing and burning CD's and DVD's is missing". Can anyone help with this?

I have uninstalled and reinstalled iTunes several times, but keep getting an error message that "the registry settings for importing and burning CD's and DVD's is missing". Can anyone help with this?

It keeps telling me to reinstall iTunes, but it continues to come back with the same error message.

Upper and lower case Username creates Contact, Calendar, Note acces problems

Dear All
Maybe someone has a solution for this or discovered the same case. Our server infrastructer is using Username with upper and lower case letters e.g "Galler".
Pushing these access data (Username, server adress etc.) for E-Mail, Contact, Calendar and Notes via the profile manager creates problems for the Contact, Calendar and Notes access, because profiles is rechanging the username in all lower case letters "galler". For the E-Mail it is not the case.
Every help would be very appreciated. Maybe some solution in using username alias with only lower case letters, but I don't no how to establish.
Thanks in advance for your help.

Perre wrote:I'm used to being able to pick one or a couple of songs and then adding it a specified playlist. Is this impossible in sonata?
It's clearly not impossible, just different than you expect. Create your playlist as you want it to appear in the Current tab (meaning don't dump every single song from your library in there, just the ones you want) and then save the playlist.
Perre wrote:And if I try to play the m3u file created (the one with every song listed) through freevo I get a message that the directory is empty. What am I doing wrong??
Look at save_absolute_paths_in_playlists in your mpd.conf.

UPPER and lower case file extensions for Photo Shop Elements using Windows 7

How do I persuade WIndows 7 to show both UPPER and lower case file extensions, which is a very useful facility offered by my ancient, 2002, version of Photoshop Elements? When processing large volumes (100 plus) photos it is very useful to be able to spot those that have been processed among those awaiting my gentle touch. The JPEG file extension produced by my camera is UPPER case so by using "Save as" with lower case the modified photos are immediately spotted. This worked fine on Windows XP and the same programme has loaded and works well on my new laptop which came loaded with Windows 7 EXCEPT that it persists in using UPPER case all the time, irrespective of the preference settings in PSE. HELP!
Camperman1

In PSE there is a facility "File > process multiple files".
Using this facility you can actually process multiple files at one go and you can easily rename images.
Addi

My SD video keeps jumping between the upper and lower frames. So the video starts frame blending and blurring in and out.

My SD video keeps jumping between the upper and lower frames. So the video starts frame blending and blurring in and out. The sequence settings are set to
Editing Mode: DV NTSC 29.97 frames/second.
Pixel Aspect Ration: D1/DV NTSC (0.9091)
Fileds: Lower Field First
Display Format: 30fps Non-Drop-Frame Timecode
720 x480

What is the source of your video, and exactly what is inside your video?
Report back with the codec details of your file, use the programs below... A screen shot works well to SHOW people what you are doing
http://forums.adobe.com/thread/592070?tstart=30 for screen shot instructions
Free programs to get file information for PC/Mac http://mediaarea.net/en/MediaInfo/Download

Upper- and lower case filenames

I have two Mac OS Extended (journaled) drives with one on my laptop and one on my desktop. I sometimes get an error that reads:
"You can't copy some of these items because their names are the same as other items on the destination volume, and that volume does not distinguish between upper and lower case letters in filenames. Do you want to skip these items and continue copying other items?"
Recently this happened when trying to force move (using the Command Key) data from my iDisk to my desktop hard drive.
Does anyone know what is going on here?
Is it advisable to first copy data to the desktop on the volume that you are moving to and then move it onto the harddrive and if so what is the reason for this?
Thanks,
Jon

Hi Kappy.
Thanks. Good information. Are you saying you can only /move/ across filesystems or disk volumes or are you saying you can only /copy/ across filesystems or disk volumes.
My impression was that going from one hard drive to another hard drive - that the default was copy, but that you could force a move by holding down the Command Key. When I do this over here the little green plus symbol goes away seeming to imply that it is moving. However, /sometimes/ the dialog says it is Copying and sometime is says it is Moving.
The problem is when it craps out in the middle of a Move (or a Copy). Ignoring the dupe file names with caps issue for the moment - what are you supposed to do when you get through a Move or a Copy (from Hard Drive to Hard Drive for instance) and Finder presents you with an error?!
My understanding of your explanation is that Finder has gotten part way through a Copy and/or (?!) part way through an Erase.
Is there any way of understanding WHERE it has gotten when it says it cannot complete an operation because filexyz.pdf is in use (even when it is not)? If I am moving 100 GB of data (or whatever) how am I supposed to know if it has only Copied some information, Copied and Erased some information, Moved some information, or Moved and Erased some information?
Irrespective of the amount of data, when you get to the point that you cannot reasonably be expected to manually sort through this data how in the world am I supposed to know what Finder has done? More importantly, what is the best way to get back to a point at which you know what information is where?
Thanks,
Jon
P.S. I'm moving data in Target Disk mode at this point and I am not getting errors like "The operation can't be completed because an item with the name "folder 100" already exists - WHEN I HAVE ALREADY SELECTED APPLY TO ALL AND OVERWRITE EXISTING FILES.

Upper and Lower Case in J2EE

Hi Friends!
I have an oracle database and i want to do string comparision.
But i have and problem.
I can use these sql in oracle gui
select UPPER(BTITLE) from sapsr3db.bilim_blog
select BTITLE from sapsr3db.bilim_blog where {fn LCASE(bilim_blog.BTITLE)}='test'
But i cannot use in J2ee sap portal application. It gives these error sequently
Upper Function are not allowed here
SQL syntax error: an illegal character "{" has been found in the statement text 
Also someone asked same question before and didnt get answer.
Re: Case insesitive String comparison in Open SQL
Best Regards
Eray

Hi
here you can find all the functions permitted in the OpenSQL:
http://help.sap.com/saphelp_nw04/helpdata/en/9b/f46cabaa874bc9a82234e8cf1d0696/frameset.htm
So I think that Upper/Lower are not permitted... the work around is to get all the records and check the Upper and Lower case using Java Code functions into your business methods.
Hoper this help.
Vito

Graph of Multiple Numeric Result displaying measurements and upper and lower limits

Is there a way with your graph control to show all the measured values against upper and lower limits in the same graph?. I can display individual lines, but would like to show all the data on the one graph. The woefully cryptic help files you provide with the graph control in TestStand seriously needs attention (Give examples!) also axis labelling, how is that achieved?

Hey Brian,
I'm not sure I understand what you're wanting to see with the data plotted on the graph--would it be possible for you to show us an example, even if it's just a drawn mockup of what the graph would look like? I'd like to look into it a bit and confirm that there is not a way to display the data.
Also, could you provide a bit of detail about the problems you've run into with using external languages with the ATML and XML reports? I'd like to understand that issue a bit better as well to determine how we could address it.
One thing you might be interested in is that we can currently embed images in the report by inserting HTML code linking to the image. I've seen cases where a LabVIEW VI plotted some data onto a custom graph, saved a picture of the control, and linked the image into the report. Here is a KnowledgeBase article which describes how the linking process works: http://digital.ni.com/public.nsf/allkb/D98A271E30431C9D86256C230079843A?OpenDocument
I'll look forward to your reply about what you're hoping to see, and perhaps we can think of the best way to accomplish it with the reporting mechanism in TestStand. As Chiara mentioned, if there are features you would like to see that are not currently possible with our reports, the Idea Exchange will be a great place to post that.
Thanks!
Daniel E.
TestStand Product Support Engineer
National Instruments

Sony Xperia z2 edges still big(the upper and lower)

The edges are still big(the upper and lower).There are smartphones with the same size or smaller and they have 5.5 inch display.

If you are comparing with LG G3, than there is a lot of differences in both phone. For one, the power and volume buttons for G3 is located behind the phone, not easily accessible. G3 is not dust and water resistance like S5 or Z2. G3 is wider and thicker than Z2. G3 camera app cannot choose manual settings compare to Z2.
So if G3 is what you are looking for, you can still sell your Z2, top up the difference and buy G3.

Datatable for upper and lower limit maintained in Measuring Point.

Hi,
I am making use of user exit : IMCR0001. User exit generates maintenance order for measuring reading which are beyong the range maintained in measruing point.
I have create measuring point with characteristics as TEMPERATURE. I have maintained upper limit : 1500 C & lower limit : 1200 C.
When I check datatable IMPTT and look for upper and lower limit, it is showing me : Upper range :1.7731500000000001E03 Lower range : 1.4731500000000001E03
Why is that I can not find the actual value as 1500 and 1200 n the datatable?
In which datatable I can find these values?
Kindly help.
Thanks in advance.
Regards,
TOM.

Hi Tom,
These are system Generated Values, but they will be concatenated by a few Zeros, but you can always find the exact value,
I am able to see the Values correctly in my system follower by some 10-12 zero's "E"+ 02 or 03.
but can check the values
can cross check the Characteristics for the same measuring point?
Regards,
Yawar Khan

Read the signal value that pass over the upper and lower limit..

how to create the system which can read the signal value that pass the lower and upper limit? i've try but the system only read the value that in range of upper and lower limit..thanks..

Im not very sure if this system can read the value that pass over the limit..because at the save file data so many value(i will attach that file)..and i dont know how to setting to get the failure values only..
Actually i want to build some system that can read and save value that pass over the limit..i take the signal from simulation sine signal..no hardware required..
im very new with this software and im in learning process..
A very big thanks to all that helping me..
save file data from the system
Channels 8
Samples 1 1 1 1 1 1 1 1
Date 2012/03/05 2012/03/05 2012/03/05 2012/03/05 2012/03/05 2012/03/05 2012/03/05 2012/03/05
Time 12:30:11.099999 12:30:11.216 12:30:11.216 12:30:11.216 12:30:11.099999 12:30:11.216 12:30:11.216 12:30:11.216
X_Dimension Time Time Time Time Time Time Time Time
X0 1.0000000000000001E-1 1.0000000000000001E-1 1.0000000000000001E-1 1.0000000000000001E-1 1.0000000000000001E-1 1.0000000000000001E-1 1.0000000000000001E-1 1.0000000000000001E-1
Delta_X 0.001000 0.001000 0.001000 0.001000 0.001000 0.001000 0.001000 0.001000
***End_of_Header***
X_Value Sine (Negative Peak) Failures (Negative Peak) Upper Limit (Negative Peak) Lower Limit (Negative Peak) Sine (Positive Peak) Failures (Positive Peak) Upper Limit (Positive Peak) Lower Limit (Positive Peak) Comment
0.100000 -6.999066 -6.999066 5.000000 -5.000000 6.999136 6.999136 5.000000 -5.000000
0.200000 -6.998993 -6.998993 5.000000 -5.000000 6.999204 6.999204 5.000000 -5.000000
0.300000 -6.998917 -6.998917 5.000000 -5.000000 6.999269 6.999269 5.000000 -5.000000
0.400000 -6.998838 -6.998838 5.000000 -5.000000 6.999331 6.999331 5.000000 -5.000000
0.500000 -6.998756 -6.998756 5.000000 -5.000000 6.999391 6.999391 5.000000 -5.000000
0.600000 -6.998672 -6.998672 5.000000 -5.000000 6.999447 6.999447 5.000000 -5.000000
0.700000 -6.998585 -6.998585 5.000000 -5.000000 6.999501 6.999501 5.000000 -5.000000
0.800000 -6.998495 -6.998495 5.000000 -5.000000 6.999552 6.999552 5.000000 -5.000000
0.900000 -6.998403 -6.998403 5.000000 -5.000000 6.999601 6.999601 5.000000 -5.000000
1.000000 -6.998307 -6.998307 5.000000 -5.000000 6.999646 6.999646 5.000000 -5.000000
1.100000 -6.998209 -6.998209 5.000000 -5.000000 6.999689 6.999689 5.000000 -5.000000
1.200000 -6.998108 -6.998108 5.000000 -5.000000 6.999729 6.999729 5.000000 -5.000000
1.300000 -6.998005 -6.998005 5.000000 -5.000000 6.999766 6.999766 5.000000 -5.000000
1.400000 -6.997898 -6.997898 5.000000 -5.000000 6.999801 6.999801 5.000000 -5.000000
1.500000 -6.997789 -6.997789 5.000000 -5.000000 6.999833 6.999833 5.000000 -5.000000
1.600000 -6.997677 -6.997677 5.000000 -5.000000 6.999862 6.999862 5.000000 -5.000000
1.700000 -6.997563 -6.997563 5.000000 -5.000000 6.999888 6.999888 5.000000 -5.000000
1.800000 -6.997445 -6.997445 5.000000 -5.000000 6.999912 6.999912 5.000000 -5.000000
1.900000 -6.997325 -6.997325 5.000000 -5.000000 6.999932 6.999932 5.000000 -5.000000
2.000000 -6.997202 -6.997202 5.000000 -5.000000 6.999950 6.999950 5.000000 -5.000000
2.100000 -6.997076 -6.997076 5.000000 -5.000000 6.999965 6.999965 5.000000 -5.000000
2.200000 -6.996948 -6.996948 5.000000 -5.000000 6.999978 6.999978 5.000000 -5.000000
2.300000 -6.996817 -6.996817 5.000000 -5.000000 6.999988 6.999988 5.000000 -5.000000
2.400000 -6.996683 -6.996683 5.000000 -5.000000 6.999994 6.999994 5.000000 -5.000000
2.500000 -6.996546 -6.996546 5.000000 -5.000000 6.999999 6.999999 5.000000 -5.000000
2.600000 -6.996546 -6.996546 5.000000 -5.000000 7.000000 7.000000 5.000000 -5.000000
2.700000 -6.996683 -6.996683 5.000000 -5.000000 6.999994 6.999994 5.000000 -5.000000
2.800000 -6.996817 -6.996817 5.000000 -5.000000 6.999988 6.999988 5.000000 -5.000000
2.900000 -6.996948 -6.996948 5.000000 -5.000000 6.999978 6.999978 5.000000 -5.000000
3.000000 -6.997076 -6.997076 5.000000 -5.000000 6.999965 6.999965 5.000000 -5.000000
3.100000 -6.997202 -6.997202 5.000000 -5.000000 6.999950 6.999950 5.000000 -5.000000
3.200000 -6.997325 -6.997325 5.000000 -5.000000 6.999932 6.999932 5.000000 -5.000000
3.300000 -6.997445 -6.997445 5.000000 -5.000000 6.999912 6.999912 5.000000 -5.000000
3.400000 -6.997563 -6.997563 5.000000 -5.000000 6.999888 6.999888 5.000000 -5.000000
3.500000 -6.997677 -6.997677 5.000000 -5.000000 6.999862 6.999862 5.000000 -5.000000
3.600000 -6.997789 -6.997789 5.000000 -5.000000 6.999833 6.999833 5.000000 -5.000000
3.700000 -6.997898 -6.997898 5.000000 -5.000000 6.999801 6.999801 5.000000 -5.000000
3.800000 -6.998005 -6.998005 5.000000 -5.000000 6.999766 6.999766 5.000000 -5.000000
3.900000 -6.998108 -6.998108 5.000000 -5.000000 6.999729 6.999729 5.000000 -5.000000
4.000000 -6.998209 -6.998209 5.000000 -5.000000 6.999689 6.999689 5.000000 -5.000000
4.100000 -6.998307 -6.998307 5.000000 -5.000000 6.999646 6.999646 5.000000 -5.000000
4.200000 -6.998403 -6.998403 5.000000 -5.000000 6.999601 6.999601 5.000000 -5.000000
4.300000 -6.998495 -6.998495 5.000000 -5.000000 6.999552 6.999552 5.000000 -5.000000
4.400000 -6.998585 -6.998585 5.000000 -5.000000 6.999501 6.999501 5.000000 -5.000000
4.500000 -6.998672 -6.998672 5.000000 -5.000000 6.999447 6.999447 5.000000 -5.000000
4.600000 -6.998756 -6.998756 5.000000 -5.000000 6.999391 6.999391 5.000000 -5.000000
4.700000 -6.998838 -6.998838 5.000000 -5.000000 6.999331 6.999331 5.000000 -5.000000
4.800000 -6.998917 -6.998917 5.000000 -5.000000 6.999269 6.999269 5.000000 -5.000000
4.900000 -6.998993 -6.998993 5.000000 -5.000000 6.999204 6.999204 5.000000 -5.000000
5.000000 -6.999066 -6.999066 5.000000 -5.000000 6.999136 6.999136 5.000000 -5.000000
5.100000 -6.999136 -6.999136 5.000000 -5.000000 6.999066 6.999066 5.000000 -5.000000
5.200000 -6.999204 -6.999204 5.000000 -5.000000 6.998993 6.998993 5.000000 -5.000000
5.300000 -6.999269 -6.999269 5.000000 -5.000000 6.998917 6.998917 5.000000 -5.000000
5.400000 -6.999331 -6.999331 5.000000 -5.000000 6.998838 6.998838 5.000000 -5.000000
5.500000 -6.999391 -6.999391 5.000000 -5.000000 6.998756 6.998756 5.000000 -5.000000
5.600000 -6.999447 -6.999447 5.000000 -5.000000 6.998672 6.998672 5.000000 -5.000000
5.700000 -6.999501 -6.999501 5.000000 -5.000000 6.998585 6.998585 5.000000 -5.000000
5.800000 -6.999552 -6.999552 5.000000 -5.000000 6.998495 6.998495 5.000000 -5.000000
5.900000 -6.999601 -6.999601 5.000000 -5.000000 6.998403 6.998403 5.000000 -5.000000
6.000000 -6.999646 -6.999646 5.000000 -5.000000 6.998307 6.998307 5.000000 -5.000000
6.100000 -6.999689 -6.999689 5.000000 -5.000000 6.998209 6.998209 5.000000 -5.000000
6.200000 -6.999729 -6.999729 5.000000 -5.000000 6.998108 6.998108 5.000000 -5.000000
6.300000 -6.999766 -6.999766 5.000000 -5.000000 6.998005 6.998005 5.000000 -5.000000
6.400000 -6.999801 -6.999801 5.000000 -5.000000 6.997898 6.997898 5.000000 -5.000000
6.500000 -6.999833 -6.999833 5.000000 -5.000000 6.997789 6.997789 5.000000 -5.000000
6.600000 -6.999862 -6.999862 5.000000 -5.000000 6.997677 6.997677 5.000000 -5.000000
6.700000 -6.999888 -6.999888 5.000000 -5.000000 6.997563 6.997563 5.000000 -5.000000
6.800000 -6.999912 -6.999912 5.000000 -5.000000 6.997445 6.997445 5.000000 -5.000000
6.900000 -6.999932 -6.999932 5.000000 -5.000000 6.997325 6.997325 5.000000 -5.000000
7.000000 -6.999950 -6.999950 5.000000 -5.000000 6.997202 6.997202 5.000000 -5.000000
7.100000 -6.999965 -6.999965 5.000000 -5.000000 6.997076 6.997076 5.000000 -5.000000
7.200000 -6.999978 -6.999978 5.000000 -5.000000 6.996948 6.996948 5.000000 -5.000000
7.300000 -6.999988 -6.999988 5.000000 -5.000000 6.996817 6.996817 5.000000 -5.000000
7.400000 -6.999994 -6.999994 5.000000 -5.000000 6.996683 6.996683 5.000000 -5.000000
7.500000 -6.999999 -6.999999 5.000000 -5.000000 6.996546 6.996546 5.000000 -5.000000
7.600000 -7.000000 -7.000000 5.000000 -5.000000 6.996546 6.996546 5.000000 -5.000000
7.700000 -6.999994 -6.999994 5.000000 -5.000000 6.996683 6.996683 5.000000 -5.000000
7.800000 -6.999988 -6.999988 5.000000 -5.000000 6.996817 6.996817 5.000000 -5.000000
7.900000 -6.999978 -6.999978 5.000000 -5.000000 6.996948 6.996948 5.000000 -5.000000
8.000000 -6.999965 -6.999965 5.000000 -5.000000 6.997076 6.997076 5.000000 -5.000000
8.100000 -6.999950 -6.999950 5.000000 -5.000000 6.997202 6.997202 5.000000 -5.000000

MIC with different upper and lower limit

Hi experts,
I have a scenario where I have a characteristic to be tested for trace element in a chemical.
But the upper and lower specification of this MIC is different for different chemicals (material numbers) . ie the specification depends on chemical (material) to be inspected.
So I am stuck with a combination a number of MICs with same trace element (say iron) to be tested for a number of chemicals.
How does QM handle this scenario ?
Rgds
JMG

1st - Are you batch managed? if so you can create a batch class and add a general characteristic to it linked to a single MIC. Use this MIC in your inspection plans. Then in the batch class set the specs limits.
You can create a separate batch class for each group of materials. I.e. those with the same specs.
You can also modify the spec value in the classification view for each material that is different then the spec in the class.
You can also create plans which use the same MIC but in the plan you unlock it and set the spec. Then assign all the materials using that spec to the same plan.
This is all very simplied above. But under NO circumstances should it be necessary to create multiple MICS for the same test with all different specs!
Craig

Registry settings problem...upper and lower filters missing!?

Similar Messages

Maybe you are looking for