Regrding upgradation from sap r/3 4.6 to ECC 6.0

Hi Friends,
We want to upgrade from 4.6C to ECC6.0 .
Pls can any one suggest me which tool i have to use .
Possible pls send me some docs on this one.
Thanks & Regards,
Ramnaresh.P

hello,
u need to post in forums SAP Solutions » SAP ERP 6.0 Upgrade .this is not the forum to post,
For the info:
For the functional and technical changes, check out the release notes for SAP ERP 6.0 and SAP NetWeaver (AS ABAP usage type) on the help portal respectively. http://help.sap.com
You can also check out the SAP ERP solution browser on the SAP ERP upgrade page. http://service.sap.com/erp-upgrade.
http://solutionbrowser.erp.sap.fmpmedia.com/
Please refer to the following links -
https://wiki.sdn.sap.com/wiki/display/HOME/ERP2005+Upgrade
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/webcontent/uuid/7308da46-0d01-0010-30aa-b61527ba008c?rid=/library/uuid/9cfdd546-0d01-0010-6688-ba8ddc48edc9
http://www.id.unizh.ch/dl/sw/sap/upgrade/Master_Guide_Enh_Package_2005_1.pdf
http://www.sap.com/solutions/business-suite/erp/pdf/ERP_Upgrade_Guide.pdf
Reg,
Dhanya

Similar Messages

  • Upgrading from SAP R/3 4.6D to ECC 6.  Config. To be takencare.

    Hi All,
       We are configuring for Depot Sale for our Client in Sap 4.6D. As they are updating from SAP R/3 4.6D to SAP ECC 6.00. I like to know what the things to be taken care are.
    While configuring for Depot Sale in Sap 4.6D. We have updated the patches & OSS Notes. We need to transport that also.
    Please let us know at the earliest.
    Thanks in Advance,
    Sapuser

    Hi
    Yes you need to transport the applied notes & Patches also if they are not avaialble in ECC 6.0
    Thanks & REgards
    Kishore

  • UPGRADE FROM SAP R/3 4.7 TO ECC 6.0 SR3

    Hi Gurus ,
                 We are now using SAP R/3 4.7 . Now we are upgrading 4.7 to ECC 6.0 . Kindly advice me what are the steps for doing this upgrade .
    Regards
    Selvan .SP

    Hi Selvan,
    Go through document in below thread,you will get more info on upgrade
    https://www.sdn.sap.com/irj/scn/wiki?path=/display/erp6/sapERP6.0+Upgrade%2520%2520SAP%2520ERP%25206.0%2520Upgrade
    Faq's on SAP upgrade in below link,
    SAP ERP 6.0 Upgrade
    Thanks Regards,
    Syfulla

  • Upgrade project : from SAP R/3 4.6C to ECC 6.0 by using SAP Data Services

    Hi All,
    My client is upgrading from SAP R/3 4.6C to ECC 6.0
    We are planning to use SAP Data Services(Data Integrator) in the upgrade plan from SAP R/3 4.6C to ECC 6.0 for Data Migration.
    we have no idea whether we can use this SAP Data Services(Data Integrator) in SAP upgrade data migration.
    The bottom line is we have to make use this Data Services (Data Integrator) product in our upgrade plan for Data Migration.
    Please tell us if anybody already used it such kind of scenario in a data migration project with Data Services(Data Integrator).
    If we can use Data Service(Data Integrator) what are the pros and cons in using this Data Services(Data Integrator).
    Thank You,
    Ashok

    My opinion is you would want to utilize SAP tools to port the data - our SAP BASIS administrator is out this week but we can provide exact tool names when he returns.  ELM (External List Management), IDOC are some of the tools.
    You could use DS/DI to export, cleanse, deduplicate the records prior to importing with SAP tools if that is your end goal.
    We also offer a data quality tool that extends DS/DI to cleanse/deduplicate name/address records as they are entered into the system.  It also comes with batch tools to cleanse/dedup the entire systems name/address information.  See Data Quality Management for SAP for further details.

  • Upgrade from SAP Webas 6.40 to SAP Netweaver 2004s

    Do we have to change the virtual host name used for high availability clustering environment to local host name before we conduct the upgrade from SAP WebAS 6.40 to SAP NetWeaver 2004's ?

    Do we have to change the virtual host name used for high availability clustering environment to local host name before we conduct the upgrade from SAP WebAS 6.40 to SAP NetWeaver 2004's ?

  • Follow up activities after SAP (CU&UC) upgrade from SAP 4.6c to ECC6 EHP4

    Dear Friends
    We have completed SAP (CU&UC) upgrade from SAP 4.6c to ECC6 EHP4.
    We refereed the upgrade guide for follow activities and we required confirmation before performing the activities.
    Could you please help us what needs to be done immediately after upgrade.
    Regards,
    Bharathi

    Dear Nils,
    Thanks for the support.
    Yes, we are following the same document 'CUUC46C_to_NW701SP07' for unicode conversion after the upgrade from the note 928729.
    Please suggest us in that document which are the steps should be carried out after ECC6.0 EHP4 upgrade,
    1. Preparation
    2. Unicode Preconversion Phase in SAP Basis 4.6C
    3. Upgrade Process
    4. Unicode Conversion Phase
    5.  Unicode Conversion Completion Phase
    6. SAP Notes
    Regards,
    Bharathi

  • IM (Inventory material) is failing in ECC 6.0 upgrade from SAP R/3 4.7

    Hello,
    We are working on Technical upgrade project (SAP R/3 4.7 to ECC 6.0 EHP 6) for one of our Client.
    when we are trying to create a purchase order (ME21N) in upgraded system (ECC 6.0), the field  IM Material is failing to accept the internal material values from MATNR field. After entering the IM material, the value immediately got disappeared and it needs some workaround to get the material back in to the IM field along with MPN material.
    It was working fine (accepting Internal material) in R/3 4.7, if we give a valid internal material, it immediately get copies to the field IM Material.
    In case of ECC 6.0, it is completely failing.
    Please suggest if you have come across any solution?
    Regards
    Rifaie

    Hi Selvan,
    Go through document in below thread,you will get more info on upgrade
    https://www.sdn.sap.com/irj/scn/wiki?path=/display/erp6/sapERP6.0+Upgrade%2520%2520SAP%2520ERP%25206.0%2520Upgrade
    Faq's on SAP upgrade in below link,
    SAP ERP 6.0 Upgrade
    Thanks Regards,
    Syfulla

  • Is it possible for XI 2.0 to connect to ECC 6.0 upgraded from SAP R/3 4.6?

    Hi,
    I just wanted to know whether it is possible for XI 2.0 to be used with ECC 6.0 which is upgraded from SAP R/3 4.6.
    If yes, could you forward some links so as to know how.
    Thanks,
    Fariha

    hi,
    >>>>Is that Possible..?
    yes
    >>>Wont there be any additional configuration needed ?
    if you use IDOCs then you don't need anything special
    Regards,
    michal

  • How  to Upgrade from SAP NetWeaver 7.01 to NW 7.02?

    Hi Experts,
      I am working on GRC upgrade project,we need upgrade to GRC10.0 from GRC3.0.
    GRC 10.0 only work on NW7.02,we now have NW7.01. 
      How  to Upgrade from SAP NetWeaver 7.01 to NW 7.02?
    Use EHPI tools or just spam/saint  or any other way ?
    current version:
    SAP_ABA 701 0006 SAPKA70106
    SAP_BASIS  701 0006 SAPKB70106
    PI_BASIS 701 0006 SAPK-70106INPIBASIS
    SAP_01 0006 BW SAPKW70106
    Thanks!

    HI,
    Net wevaer 7.2 CE is totally different from Net weaver 7.01.
    No relation i feel.kindly check the links.
    http://help.sap.com/saphelp_nwce72/helpdata/en/44/d958673ef05f4de10000000a11466f/frameset.htm
    http://help.sap.com/content/documentation/netweaver/index.htm
                      OR
    You do not need Netweaver 7.2 CE for using NWBC 3.0. You just need netweaver 7.02.
    You simply need to apply enhancement package 2 on your existing 7.01 system to make it 7.02.
    Please refer to installation guides on service marketplace, there you can see the EHP2 installation guides.
    Also, see SAP Note 900000 - Netweaver Business Client - FAQ. This will give you all the details required.
    *Regards,
    Ajitabh

  • Upgrade from SAP BO 3.1 SP3 to SAP BO 3.1 SP5

    Hi
    We are doing upgrade from SAP BO 3.1 SP3 to SAP BO 3.1 SP5, can you please help in below points
    1. How much time does it take to run SP5 upgrade service pack for servers and client tools. The server need to be upgraded only on weekend, is it possible to upgrade in 1.5 days?
    2. The OS is Windows 2008 server. what should be the rollback plan in case of upgrade failure ? One of server uses VM image while Production server doesnt have any VM image.
    3. If BO client tools are on SP3, can they still connect to BO server components on SP5 - (for interim period when servers are upgraded first)
    Thanks
    anu

    Hi Anu,
    1. The upgarde should be completed in 1.5 days for the server and client componenets depending upon the number of servers you have in the cluster . If you are planning for upgarde do it successfully first on TEST , DEV and then proceed with PROD servers
    2. The roll back plan includes thebackup of the CMS database , the filestore directory and the complete installation folder . In case of any issue , you can the place the backup . If the servers are on the VM , it is always recommeded to have the snapshot of the images before the upgrade
    3. Yes, they can connect to the SP3 servers , but always recommeded to upgarde and have servers and client tools on same patch .
    Thanks,
    Sneha

  • Depreciation Run Error while Upgrading from SAP 4.6C TO ECC6.0

    Hi
    We are upgrading from 4.6c to ECC 6.0.  In ECC 6.0 we need to make the Number Range Interval as "Internal" and Batch Session tick to be removed from the Depreciation Document Type. 
    While executing depreciation run, it got terminated and I have done the above changes.  After that I have restarted the Depreciation.  I have got the following error Message.
    Message(s) during check of document ERROR00001
    Message no. AAPO511
    S:/SAPDMC/LSMW_AUX_020:006 20
    Message no. /SAPDMC/LSMW_AUX_020006
    If any body aware solution, kindly reply to this message
    Thanks
    siva

    Check this useful links
    Key differences between SAP 4.6 - ECC 6.0
    http://sap.ittoolbox.com/groups/technical-functional/sap-hr/difference-sap-ecc60-with-sap-r3-3161113
    LE/WM functionality difference between 4.6c and ECC 6.0
    differences between SAP R/3 ECC 6 & SAP R/3 4.6C in Material management mod
    Upgrade from SAP R/3 4.6 C to ECC6.0 - To find obselete and new tcodes
    Upgrade from SAP R/3 4.6 C to ECC6.0 - To find obselete and new tcodes

  • Error after upgrading from  sap b1 pl 35 to pl 49

    hello sap experts 
    iam getting the following error after upgrading from  sap b1 pl 35 to pl 49 this error is coming if we have given round off or discount in the below cell
    "Discount deviates from authorised ranges (sales oreder-discount%for document) [message 439-15] pls make it as soon as possible an i will be thankful to those guys .
    regards
    Jenny

    Hello Jenny,
    You may check by supreuser account first to see if you got the same error.  If not, it probably just related to user authorization.  If yes, it must be a bug.
    Thanks,
    Gordon

  • Impact of upgrade from SAP CRM Interaction Center 4.0 to 5.0 on Genesys CTI

    Hi Friends,
    I would like to know that what is the impact of upgrade from SAP CRM Interaction Center 4.0 to 5.0 on Genesys CTI software.
    1) Will there be anything we need to change?
                for e.g.
                     a) Settings
                     b) Software
                     c) Hardware
    2) What do we need to keep in mind when upgrading from SAP CRM Interaction Center 4.0 to 5.0?

    Hello!
    The biggest change you must face is related to Java. If you had CRM4.0 Java configuration, you must change your settings to the non-java configuration CRM5.0 has. Most of those changes are performed by the upgrade program, but you must activate services in transaction SCIF.
    Your other concerns:
    - Software: Most of the Genesys releases are compatible with both java and non java configurations. Anyway, I am sure Genesys has compatibility instructions.
    - Hardware: No changes to my knowledge
    <b>Hope it helps. Please, reward points if so</b>
    Regards
    Joaquin

  • Error during upgrade from sap R3 4.7 ext 110 to ERP6 EHP4

    Dear all
    we doing an upgrade in test server to ERP6 with EHP4,source release is sap Entreprise 4.7 110.We have copied all the required DVDs to the server .During the configuration phase while giving the EHP package we got the error.
    EHP_INCLUSION.log details
    4 ETQ233 Calling function module "SPDA_PREPARE_PATCH" by RFC
    4 ETQ234 Call of function module "SPDA_PREPARE_PATCH" by RFC succeeded
    4 ETQ239 Logging off from SAP system
    4 ETQ010 Date & Time: 20100915210509
    2 ETQ732 Package descriptions uploaded successfully
    4 ETQ399 Looking for SAINT package for 'SAP_APPL' ...
    4 ETQ399 R3upReadNewPackages:
    4 ETQ399   patchType='U', langVect='DE'
    4 ETQ359 RFC Login to: System="MBD", Nr="00", GwHost="saptest", GwService="sapgw00"
    4 ETQ232 RFC Login succeeded
    4 ETQ233 Calling function module "spda_read_new_packages" by RFC
    4 ETQ399   ismovesVersion='0'
    4 ETQ399 R3upReadNewPackages: exit: rc=0
    4 ETQ399      Found: name = 'SAP_BS_FND', release = '701', package = 'SAPK-701GGINSAPBSFND', type = 'AOX'
    4 ETQ399             (not usable, different component
    4 ETQ399 ... No matching package found.
    Is this related to the current SAP_APPL support pack version ?.currently we have
    SAPKH47031 SP 31 for SAP_APPL 4.70
    Regards
    Shahnas.S

    > i have few questions regarding above
    (Almost) all of your questions are answered in the note:
    > 2.Do wee need to apply the above note for non-unicode upgrade
    <...>
    Even on non-Unicode system you should replace all matchcodes that are still required by search helps.
    <...>
    > 3.Note 1330256  recomends to apply support pack or to apply the Note 1330256  ,but we can do it only at upgraded version.
    Yes - it avoids dumping with the dump mentioned in the note
    > 4.How to identify the matchcodes 
    <...>
    You can use the program TWTOOL01 to determine the existence of matchcodes.
    <...>
    > 5.How to delete them
    <...>
    You can then use the function module DD_MCOB_DEL to delete matchcode objects, and the function module DD_OBJ_DEL to delete matchcode IDs.
    <...>
    > 6.Impact of deleteing matchcodes
    None since they were replaces by search helps.
    Markus

  • We have to upgrade from SAP 4.0 version to ECC6.0(only EDI/IDOC effects)

    Hi All,
    We have to upgrde a system from SAP 4.0 version to ERP6.0, is there any difference in EDI and IDOC
    tables or their types in ERP6.0 from the 4.0 version, which we have to also consider or not.
    but if differences are there but SAP itself is taking care for that, then how the sap is taking care of that ..?
    Regards,
    Rohit Sharma
    Edited by: rohit sharma on Jun 19, 2008 1:26 PM

    I´m not sure what you mean by "old table to new table".
    The general table structure is not changed, VBAK + VBAP are still there. They may have been extended by additional fields, depending on how your system is implemented. It´s also possible, that if you activate any business function after the upgrade, that tables will get appends.
    The old IDOC structures working before the upgrade should work after the upgrade the same way since those structures are not touched.
    Markus

Maybe you are looking for