Regular Expressions in the new editor

Hi,
we just ubgraded to SAP GUI 6.40 and ERP 2005, when i hit ctrl-h the search and replace dialog is popping up in the new editor. But the checkbox "regular expression" is greyed out and cant be activated. Why?
cu
Rainer

Hi, I can only confirm that. The help indicates that it should work, but on the screencaps, it's grayed out too.
Besides that,
Open completion automatically after is not implemented yet (is mentioned in the help).
There are also problems with the incremental search backwards. It works only once.
Eddy
PS.
Put yourself on the SDN world map (http://sdn.idizaai.be/sdn_world/sdn_world.html) and earn 25 points.
Spread the wor(l)d!

Similar Messages

Will there be a new airport express like the new airport base station?

Will the airport express be upgradable to the "N" standard? (I doubt it.)
If you want to use your airport express with the new Base stations wouldn't it screw up the "Pre-N" mode? (I don't doubt it)
Is apple saying that one wouldn't need an airport express to extend the reach of the new base station because the new "Pre-N" modes have so much more range? (I think so).
Does this mean that apple will be making a new version of the Airport express with A,B, G and "Pre-N" ? How cool would that be? I want one of those!!
IMHO the airport express is the coolest Network device available for use with either Macs or WINdoz machines. It is just plain cool. It seems to me that the new Base station has little or no place in it's heart for it's older little brother.
Yaesumofo

As you know from reading the "Help & Terms of Use" for this discussion area, we are Mac users like yourself and have no special knowledge of Apple's future plans or activities.
Furthermore in the "Help & Terms of Use" it states that speculation on future Apple products, plans, or activities is forbidden in this discussion area.

I want to upgrade my old airport express to the new express. Can I just switch out the old for the new or must I delete the old network first and start from scratch with the new express?

I want to upgrade my old airport express to the new express. Can I just switch out the old for the new or must I delete the old network first and start from scratch with the new express?

It is not necessary to delete your old wireless networks first, but doing so may eliminate confusion. If you wish to do that, open System Preferences > Network, and select Wi-Fi from the left column. Click the Advanced... button, then select your old wireless networks and delete them with the "–" (minus) button. Make sure the "Remember networks this computer has joined" remains checked.
OK then Apply.
This prevents your Mac from searching for your previous network which will no longer exist.
A new Express creates an open wireless network that you must select before you can configure it. It appears in your Wi-Fi menu like this:
Select it. AirPort Utility will load and walk you through its configuration.
Edit: If you are really using OS X 10.5.1 as shown in your profile, the above screenshot is not applicable. Instead, select the network called "Apple network nnnnnn" and then launch AirPort Utility.

ABAP Sneak Preview SAP NetWeaver 04s: where is the new Editor?

It's so nice to have NetWeawer 2004s up and running...
Anybody knows where is the new ABAP Editor?
As I know, it should be included but I cannot see it...
I'm using the SAPgui 640 Final Release - Patch 8.

i am not sure whether it was there in patch 8, but i upgraded to patch14 and activated the new editor from
se38->utilities->settings->ABAP editor
here choose radiobutton front-end Editor (New)
warning:- dont apply gui patch 15 it has got some problem. when i applied patch 15 i couldnt event start the sap logon pad.
Regards
Raja
Message was edited by: Durairaj Athavan Raja

My friend has an iPhone but doesn't use iMessage. How can I send her regular texts with the new iOS 7 update?

My friend has an iPhone but doesn't use iMessage. How can I send her regular texts with the new iOS 7 update?

That's because her phone is recognized in the Apple database as an iPhone. It should eventually convert to SMS but that's above my level of expertise here so hopefully someone else can come along and help you further. She could just turn on iMessage and solve the problem. Ha!
Good luck!

What is the regular expression for the end of a story?

Forgive me if this is wrong forum for asking this, but I'm trying to use the Find command using GREP and I need to know the regular expression for the end of a story. (Or, the last character of a story.) Thanks in advance.

I'd try search for .\z (that's a dot in front) which ought to find the very last character in the story, and replace with $0 and your additional text.
You know you can use a keyboard shortcut to move your cursor to the end of any story, right? Ctrl + End on Windows, Cmd + End, I think, on Mac. Unless you want to do this to every single story in the document, I would think you might be just as well off to put your text on the clipboard, put the cursor in the story and hit the key combo followed by Ctrl/Cmd + V to paste.

I bought a new computer and want to transfer pics from a regular folder to the new computer. What's the best way to do that?

I bought a new computer and want to transfer pics from a regular folder to the new computer. These aren't in the cloud so they didn't transfer automatically. What's the best way to do that? Can I sync my old computer to my new computer through I tunes and transfer them that way?

iTunes will only transfer them to your iPad, and once transferred to your iPad they cannot be imported to your other computer (only camera roll photos can). You will either have to use a usb flash drive or external drive to transfer them, or use an app like PhotoSync, which will transfer photos between your devices and computers over your wifi.

Regular expression in B2B Document editor

Hi All,
i intent to parse a file coming into B2B with record entry starting as ' 88'. And i want to use this value 88 to differentiate it from other records. I have set a rule (^[ \t]+88) on the field to pick this entry and set the value of the tag field as 88.
but it is not getting picked up properly and is jumping over this record itself completely. could you please suggest how this regular expression rules work when used with tag.. i have to use only the rule but still the record is not getting properly picked up...
kindly share any assistance in this regards
thanks
Rakesh

Hi Datla,
Yes, there is a de-identification support in Data Editor of B2B Document Editor. Once you open a EDI or HL7 doc with data editor, it will ask you to "Choose De-Identification and specify rule file". You may create a separate file for your use. Data Replacement Rule file is actually a XML which holds the separator information along with the data to be replaced. You may define your own DRR file.
To know more, just open the Data Editor from Document Editor, go to Help --> Content -->Data Replace and De-Identify section.
Regards,
Anuj

Starting the new editor results in short dump

Hi gurus,
When I switch to the new ABAP editor in Nteweaver 7.0 I get a short dump when opening an ABAP source.
The message says:
message_type_x
Does anybody know what the problem is?
We are working with SAPGUI 6.40 patch 16.
Working in the old frontend editor works fine by the way.
Regards,
Wouter Heuvelmans

Hello,
perhaps it's a problem with the SAP GUI version. I think there's already a newer one available.
I would try to create a message in the SAP GUI forum:
SAP GUI
Ok, seems not to be a SAP GUI version problem:
http://help.sap.com/saphelp_nw70/helpdata/en/43/29dee414483fe1e10000000a11466f/content.htm
Best regards
Stephan
Edited by: Stephan Theis on Jan 14, 2008 12:38 PM

Getting the regular expression from the given text

Hi
I need to develope an application which can convert the given text into the regular expression. I need that when i enter any text in textarea that should be translated into regular expression in another panel. but i could not find the method or technique which can do so. plz help me to resolve this issue.
Thanks Imran khan.

well, there are an infinite number of regular expressions for an arbitrary piece of text, so you will have to qualify in your mind what the purpose of the regular expression is.
For instance, it is trivial to create a regex for a string just by copying the input text, and inserting \ before any special characters. But this pattern would probably be quite silly.

Need a regular expression for the text field

Hi ,
I need a regular expression for a text filed.
if the value is alphanumeric then min 3 char shud be there
and if the value is numeric then no limit of chars in that field.[0-9].
Any help is appriciated...
thanks
bharathi.

Try the following in the change event:
r=/^[a-z]{1,3}$|^\d+$/i;
if (!r.test(xfa.event.newText))
xfa.event.change="";
Kyle

Where can i see the log files from an airport express with the new airport program 6.0 ?

hello together,
does anybody know whre i can see the logfiles from an ape with the new airport utility '?

You cannot see them because they are not there in AirPort Utility 6.0
You can see them if you download and install AirPort Utility 5.6 for Mac OS X Lion
Keep both AirPort Utility 6.0 and 5.6 on your Mac and use the one that you like.

Are there any plans to add back missing functions in the new editor?

For Example, I don't seem to be able to set a link to open in a new window without editing html.
I also can't left or right align images without editing CSS, scripting, or opening up html view and adding an inline style.
These are just two of the small things I've come across recently - I'm sure there are more too.

There are several thread on this Nathan,
The answer is yes of course.
For images - Modern work - Left right align not that good. Your better creating classes to float the images and have those in your dropdown. You get better results as well.
You can go into your partner portal and customise the editor - Turning off the inline font stuff for example is a 100% must for us to avoid issues and the SEO implications those give.
I would highly recommend doing a .image-left and .image-right class dropdown options and in the CSS for those float:left etc with margin around the image... Heaps better output and clean markup.

Regular Expression - uppercase the first letter.

I'm trying to process a String so that sentences without a starting capital letter have that letter made uppercase. The code I have so far is:
import java.util.regex.*;
public class TestRegexp{
     public static void main(String[] args){
          String myString = new String("Hello. capital");
          // TODO: Fix this so that it does uppercase the first letter
          String pattern = new String("\\.\\s+\\w");
          Pattern r = Pattern.compile(pattern);
          Matcher n = r.matcher(newString);
          String newString = n.replaceAll("\\. " + "\\w".toUpperCase());
          System.out.println(newString);
I want the output to be:
Hello. Capital
But this doesn't work. Is there a way to do this using the java.util.regex library and thus avoiding the StringTokeniser route?
Thanks.

The regex package doesn't provide a direct way to do what you want, but you can manage it by using some lower-level methods of the Matcher class:
Public String capitalizeSentences(String str)
Pattern p = Pattern.compile("(\\.\\s+)(\\w)");
Matcher m = p.matcher(str);
StringBuffer sb = new StringBuffer();
while (m.find())
    m.appendReplacement(sb, "$1");
    sb.append(m.group(2).toUpperCase());
m.appendTail(sb);
return sb.toString();
}

Upgrade from Logic Express to the new Mac App Store Logic Pro?

Hey there,
So I recently bought Logic Express, thinking that sometime in the future I might want to upgrade to Logic Studio. Today Apple announced that Logic Pro is available in the Mac App Store for $200! Is there a way to upgrade from Logic Express to this version?
Thanks,
Alan

I´m from Mexico I Saved Money for one year (2010) only for buy "Logic Express" and 2011 I´ve saved money again for Up to Logic Pro. I dont want to turn me a piracy
Complementos de efectos disponibles sólo con Logic Studio
            Space Designer (reverberación por convolución)
            Delay Designer
            Match EQ
            Linear Phase EQ
            Limitador adaptivo
            Multímetro
            Multipressor (Logic Express incluye únicamente una versión predefinida)
            Loopback (sólo disponible desde MainStage)
            Postprocesador binaural
            Downmixer
            Ganancia multicanal
            Compresor surround

Regular Expressions in the new editor

Similar Messages

Maybe you are looking for