Regular Labview's VIs unable to execute in lego mindstorm labview module

Hi,
I'm trying to create a block diagram that using vision aquisition in Labview module to detect my eyeball motion for robot direction control. It's success to run the block diagram.
At the same time, i also using lego mindstorm labview module to create block diagram for the EV3 robot.
But when i interface the two algorithms in the lego module, it can't run the block diagram due to the lego module can't run the other VIs? Because the error state that Mathscript, Vision Aquisition, IMAQ and others, all are not supported to execute.
Any suggestion or other ways to solve this problem?

Did you install Lego Mindstorms software and trying to use LabVIEW VIs in there? Or do you have a regular LabVIEW license with the Lego Mindstorms add on library installed?
Lego Mindstorms is a special version of LabVIEW with restrictions like not being a general development environment. It can only run VIs that are specifically compiled to run for Lego Mindstorms and I suppose only NI has the necessary tools to do that.
Rolf Kalbermatter
CIT Engineering Netherlands
a division of Test & Measurement Solutions

Similar Messages

NI LabVIEW 2009 LEGO MINDSTORMS NXT Module Released!

This software allows users to run code on their computers to control LEGO® NXT Bricks and compile, download, and run LabVIEW code directly to the NXT. The new NXT Module 2009 represents a considerable improvement in features and usability over past versions.
Totally redesigned APIs
Full access to LabVIEW debugging tools
Control NXT bricks either by running code in LabVIEW or compiling and deploying code to the NXT brick
VIs for TETRIX kits are available out of the box
Support for all LEGO® MINDSTORMS NXT 2.0 sensors.
NXT Applications Data Viewer, Piano Player, NXT Multimeter, Remote Control, and Scope
The module can be downloaded here.
Please feel free to ask questions and provide feedback to NI R&D.
Thanks,
Mark
Product Support Engineer - LabVIEW R&D
Mark
LabVIEW R&D

Nice! But I guess that doesn't mean that you will be releasing a free version any time soon... does it.
Oh! BTW (slightly off topic) you should remove the "Select Your Operating System" block on the Student edition cd order form. It just gets peoples hopes up that they might get a mac version.
Andrew
Message Edited by AndrewDudney on 10-22-2009 10:27 PM

Installing Test Executive 5.0 in LabVIEW 6.0.2

I'm trying to install Test Executive 5.0 in LabVIEW 6.0.2. However, I run into problems. When i Try to mass compile the test executive folder I get a lot of errors (see attached file), and I don't get the executive in the tools menu.
Could someone tell me what needs to be done?
Thanks,
/Martin
Attachments:
mass_compile_TestExec.txt ‏32 KB

I use Test Executive 5.1 with LabView 6.1 (after doing a mass compile) and have no problems.
It looks to me like Test Executive isn't installed correctly so some VIs are missing or in not the expected place. Try reinstalling Test Executive. Don't move any of its VIs after you install it.
You get a ### Bad VI message for a VI if any of its subVI's are missing. There's probably a lot of other reasons for Bad VI, but a bad install seems like the most likely reason. A install may be bad if it's incomplete or simply if you install it to a new location and the VIs that use it are still referencing the old location.
Test Stand is a much more powerful product (and I use it on other applications), but for an existing application with a limited budget, we upgraded LabView,
the PC and Windows, but we didn't replace Test Executive with Test Stand. Going to Test Stand, you not only have the cost of the Test Stand software, you also have the development cost of rewriting some code for Test Stand. Depending on your application and how much you customized Test Executive, the development cost may be significant.

Text Message: Unable to execute file for security ...

Whenever I'm viewing a text message, when I try to open up the "Options" menu, I see the above message, "Text Message: Unable to execute file for security reasons". This doesn't seem to impact the functionality of the menu at all, everything seems to work.
Anyone ever come across this before?
I've updated the phone (Nokia E66) to the latest software, and I've only got one application installed other than the default base install (Google calendar sync utility), removing that doesn't change the problem.
Thanks in advance!

I get the same error after SW update to latest version when I try to run some apps

Unable to execute SDT request JAVA_EE during the JAVA---Input_adm_user_pwd

Dear Friends
I am stuck in CONFIGURATION PHASE of EHP5 Upgrade.
The ABAP phase has been completed but stuck in the Java processing INPUT_ADM_USER_PWD
"unable to execute the SDT request Java_EE operation configure on
hostname dbserver1 instance 02 Modules execution failed.
Execution of the unit PREPARE failed. Connection to the Upgrade Tool was closed."
TROUBLE TICKET LOG
Trouble Ticket Report
Installation of enhancement package 1 for SAP NetWeaver 7.0
SID................: $(/J2EE/StandardSystem/SAPSystemName)
Hostname...........: $(/J2EE/SAPGlobalHost)
Install directory..: $(/J2EE/StandardSystem/SAPSIDDirectory)
Upgrade directory..: $(/JUMP/DIR/MAIN)
Database...........: $(/J2EE/DBSystem/DBInfoName)
Operating System...: $(/J2EE/StandardSystem/ServiceInstance/BCCentralServicesInstanceHost/OpSysType)
JDK version........: $(/SystemProperties/JavaVersion) $(/SystemProperties/JavaVendor)
SAPJup version.....: $(/MAIN_VERSION)
Source release.....: $(/ER_CODE)
Target release.....: $(/J2EE/ShadowSystem/Version)
Start release SP...: $(/J2EE/StandardSystem/SPLevel)
Target release SP..: $(/J2EE/ShadowSystem/SPLevel)
Current usages.....: $(/J2EE/StandardSystem/Usages/StrCurrentUsages)
ABAP stack present.: $(/J2EE/StandardSystem/BCSystemPresent)
The execution of ended in error.
Could not perform operation on secure store. See previous messages.
Could not perform operation on secure store. See previous messages.
Class com.sap.security.core.server.secstorefs.SecStoreFS method createStoreWithEncryption has thrown the exception com.sap.security.core.server.secstorefs.FileIOException
com.sap.security.core.server.secstorefs.FileIOException: I/O error on file "e:\usr\sap\PRD\SYS\global\security\data\JUpgrade.key".
java.io.FileNotFoundException: e:\usr\sap\PRD\SYS\global\security\data\JUpgrade.key (The system cannot find the path specified)
More information can be found in the log file .
Use the information provided to trouble-shoot the problem. There might be an OSS note providing a solution to this problem. Search for OSS notes with the following search terms:
com.sap.sdt.util.secstore.SecureStoreException
Could not perform operation on secure store. See previous messages.
INPUT_ADM_USER_PWD
INIT
PREPARE
NetWeaver Enhancement Package Installation
SAPJup
Java Enhancement Package Installation
Regards
Anwer Waseem
Edited by: Anwer Waseem on Nov 9, 2011 11:48 PM

TROUBLE TICKET LOG
Trouble Ticket Report
Installation of enhancement package 1 for SAP NetWeaver 7.0
The execution of ended in error.
Could not perform operation on secure store. See previous messages.
Could not perform operation on secure store. See previous messages.
Class com.sap.security.core.server.secstorefs.SecStoreFS method createStoreWithEncryption has thrown the exception com.sap.security.core.server.secstorefs.FileIOException
com.sap.security.core.server.secstorefs.FileIOException: I/O error on file "e:\usr\sap\PRD\SYS\global\security\data\JUpgrade.key".
java.io.FileNotFoundException: e:\usr\sap\PRD\SYS\global\security\data\JUpgrade.key (The system cannot find the path specified)*
its locating on drive e:\ which is wrong directory, the global directory are avaiable on drive S:\; this is the reasons that processing are ending with error.
Please advise how to resolve ASAP.
More information can be found in the log file .
Use the information provided to trouble-shoot the problem. There might be an OSS note providing a solution to this problem. Search for OSS notes with the following search terms:
com.sap.sdt.util.secstore.SecureStoreException
Could not perform operation on secure store. See previous messages.
CHECK_PREPARE_UNIT
Regards
Anwer Waseem

Unable to Execute a Report to send PAN XML messages out of SNC

Hi All,
We are unable to Execute a Report /SCA/DM_TIMESERIES_OUT to send Product Activity Notifications in the form of XML messages out of SNC. We have manitained some Planned Reciepts data in SNC and would like to transfer it out to ECC.
Could anyone help in understanding if we have to maintain mandatory settings before executing this report.
Thanks & Regards,
Sadiq

Hi Pravin,
As per the documentation(http://help.sap.com/saphelp_snc70/helpdata/EN/48/6bdb4767a431cbe10000000a42189d/frameset.htm), we have tried both the manual and automatic features to configure the output from SNC in the form of XML messages.
The manual method gave a message "Time series data for selection is empty" and the Automated method could trigger the XML messages on every incoming message from ECC but we are unable to see the Planned Receipts in that XML messages.
Was just wondering if we can see the Planned Receipt info by changing the settings of this report or by using any other simillar report as the PR info is very important for our development.
Thanks & Regards,
Sadiq

How can I call a LabVIEW executable from within another LabVIEW executable?

I have a customer requirement for two LabVIEW executables. Based on their current setup, they need to run executable "A" or "B", both of which are under independent revision control. I have created a third "selection" executable that allows the operator to choose between one of the two, but I am receiving errors when I attempt to call a LabVIEW executable from within a LabVIEW executable using either the "System exec" VI or the "Run Application" VI. If I call a non-LabVIEW executable (such as Windows Explorer) everything works fine.

> I have a customer requirement for two LabVIEW executables. Based on
> their current setup, they need to run executable "A" or "B", both of
> which are under independent revision control. I have created a third
> "selection" executable that allows the operator to choose between one
> of the two, but I am receiving errors when I attempt to call a LabVIEW
> executable from within a LabVIEW executable using either the "System
> exec" VI or the "Run Application" VI. If I call a non-LabVIEW
> executable (such as Windows Explorer) everything works fine.
As with the other poster, I suspect a path problem. You might try the
path out in a shell window, and if it works, copy the complete absolute
path to LV to see if that works. LV is basically passing the comma
nd to
the OS and doesn't even know what is in it, so you should be able to get
it to work.
The other poster commented on subpanels, which is a good suggestion, but
without going to LV7, an EXE can have open more than one VI. You can
use the VI Server and the Run method to fire up another top-level VI.
The decision is whether you want both to be in unique processes.
Greg McKaskle

Error while checking in a document: Unable to execute service

Hi,
I am using oracle UCM 11g. When i am checking in a document, i am getting error as "Unable to execute service CHECKIN_NEW_SUB and function validateCheckinData."
In stacktrace found this is caused by:
"Unable to find query or idc data source with 'DdeletedRows'. "
How to resolve this?
Thanks in advance

Please refer to this thread ...may be u get ur answer out of it...........................
Error while checking in and storing: C:\ ..... (Message no. 26253)
regards,
Tushar Dave

Unable To Execute Files In The Temporary Directory. Setup Aborted. Error 5: Access Is Denied.

Hi Everyone,
Whenever I install some new software in my new laptop I get this error:-
Unable To Execute Files In The Temporary Directory. Setup Aborted. Error 5: Access Is Denied.
I have tried synchronizing the clocks but it doesn't remove the problem.
These softwares work on another laptop that i have, which also runs windows 7.
Can someone please tell me the solution as this is extremely urgent.
Thanks In Advance.
-Michael

In short:
============
My permissions were all fine, so if anyone has trouble resolving the issue after sorting permissions then make sure you try fully disabling your anti-virus / anti-spyware / firewall applications, because that was the cause for me.
In detail:
============
Problem:
Failed to install this application
- http://www.ssware.com/cryptoobfuscator/download.htm
- on Windows 8.1 x64
- Get error message "Unable To Execute Files In The Temporary Directory. Setup Aborted. Error 5: Access Is Denied."
First Candidate Solution
The issue turns out to NOT be security rights on the Temp folder
ESET Smart Security HIPS Advanced Memory Scanner is the cause
http://kb.eset.com/esetkb/index?page=content&id=SOLN2908&actp=search&viewlocale=en_US&searchid=1392804914417
Instead, I went and turned off all the ESS protections one by one and it turned out to be HIPS that is causing this false positive.
In fact, it is the Advanced Memory Scanner option under HIPS that is causing the error, while the application in question is legit (using Inno Setup and presumably trying to write to the user temp folder, not sure whether just logs or to execute from there)
Furthermore, Smart Security logs have no entries under HIPS even though I ticked "Log all blocked operations" under the HIPS "Advanced setup" - it was quite a journey to find out the cause :)
Thank you. I have the same OS and installed ESET Smart Security as well. And it is resolved now.
I just want to add, that by "Temporarily disable protection" and "Temporarily disable firewall", it doesn't work. You have to disable HIPS, as KristjanL said.

Unable to execute rules twice after applying Planning 9.3.1.1.11

Hi All,
Just wondering whether someone has come across this issue.
We have just applied Planning 9.3.1.1.11 on a Windows platform.
As a result, we are unable to execute the same rule twice from within the AAS console on any client machine and get the following error:
"You must be connected to database to execute a rule."
Once we get this error we cannot exeucte any other business tules and need to log back in to the AAS console to fix the problem.
If we open up the AAS console on the AAS server, we can rule the rules as many times as we like. The error only comes up when executing a same rule from a client machine.
In Planning web we can execute any business rules multiple times. However, if a user gets the above error in the AAS console, he/she is then unable to execute rules in Planning web unless he/she logs out and logs back in.
We are using Planning 9.3.1.1.11, AAS 9.3.1.3.07 and HBR 9.3.1.1.11 on the server.
However the AAS version on the client side is 9.3.1.1.9 and I think this may be what s causing the issue.
The HBR patch for 9.3.1.1.11 is a server patch and cannot be installed on client machines. I am therefore unable to upgrade the AAS console on client machines to 9.3.1.1.11.
Has anyone come across this?
Thanks for your help.
Seb

Hi John,
I worked it out last night... The readme for 9.3.1.1.11 is not very clear and I dont think it mentions patching each client.
Below are the steps:
1 - Close down the AAS console
2 - Copy the newly deployed easclientplugin.jar, cmdlnlauncher.jar and identitymigration.jar from the AAS server and paste them under Hyperion\AnalyticAdministrationServices\console\lib on your client machine. Overwrite existing files if necessary.
3 - Copy the new MigrateIdentities.bat from the AAS server and paste it under Hyperion\AnalyticAdministrationServices\console\bin on your client machine. Overwrite existing files if necessary.
4 - Log on to the AAS console and go to Help - About and ensure that the HBR version is now 9.3.1.1.11
5 - From the AAS console try and execute the same HBR twice.
Thanks for your help.
Seb

Unable to execute the substitution variable in calc scripts in essbase 11.1

Unable to execute the substitution variable in calc scripts in essbase 11.1.3
FIX(&CURRVERSION,COLA)
Unit=units*Listprice;
dataexport "file" "," "E:\NEW.TXT";
ENDFIX
Error: 1200471 Error parsing formula for FIX STATEMENT (line 1): expression expected before [)]
This is error it throws when executing the calculation script
I wonder whether its a problem with substitution variable i want to know wat went wrong inside the fix statement
I have created substitution variable use maxl
Installed the essbase in custom manner and standlone mode nt register with the shared services ,
Is this problem with the custom installation of essbase
Regards
shenna

If you remove the substitution variable and replace it with the actual value (whatever that is), does the code work? That will tell you if the issue is around the substitution variable or not.
John -- First you race Glenn, then you race me -- and you always win. :)
Regards,
Cameron Lackpour

Unable to alter the process. Unable to execute action start and stop

Hi,
I have setup a UCM CMS server on Linux. In the UCM instaance I setup If I go to Admin Server, the Genral configuration page contains no entry. While the file Config.cfg present in the directory Oracle/UCM/Server/Config/ contains all the entries I provided during the setup.
Now when I am trying to start/stop the UCM instance, it is giving me error " Request Failed : Unable to alter the process. Unable to execute action 'stop' on server 'EBIZ_UCM'." While If I try to restart the server using IdcServer present at the location Oracle/UCM/Server/bin/, it is getting started.
While clicking on the Component Manager, its giving error like :
" Unable to retrieve component data. Components.hda exists, but contains no data. ".
Please suggest.

I know this is an old thread, but I ran across this while having a similar problem. It turned out that I had started the admin server incorrectly (e.g. running /apps/oracle/ucm/server/admin/bin/IdcAdmin instead of /apps/oracle/ucm/server/admin/etc/idcadmin_start). Once I corrected that the problem went away.

AirPlay certification: Unable to execute test cases 3.2.1.3 and 3.2.1.5

Hi everyone,
I'm following the test cases specified in the AirPlay Product Compliance Test R6 Document for AirPlay. I'm unable to execute the below test cases when I'm testing for airPlay certification. There is no option in the latest Airport Utility on Macbook for executing these test cases,
Is it mandatory to execute and pass these test cases? How do I do it?
3.2.1.3 Link Layer Connection 10 Mbps/Full Duplex
3.2.1.5 Link Layer Connection 100 Mbps/Full Duplex
Thanks in advance for your help.
Sripad

Diane,
Thank you very much for the response.
I will email you the screen shots since I can not attach them to this post.
You will see in the screen shots that I don't see either a green or red light after I have clicked on the record topic icon from UPK Developer. Even after I put focus on the title bar of the app I am recording and press the printscreen button, there is no green or red light.
But now, when I do press the printscreen button, UPK does actual record something. That is further than I have gotten before.
Before I posted the forum, I was not able to record anything after several attempts and also several re-installations. But I was told that if I don't see the green or red light, I won't be able to record anything.
I am now wondering if the use of Hypersnap 6 could be impacting UPK? I use Hypersnap a lot and when I pressed the printscreen button, Hypersnap also takes a screenshot.
My question now is whether the lack of green and red lights will impact my use of UPK?
Thanks
Chris
Edited by: user455985 on Dec 22, 2010 2:04 PM

Error - Unable to execute service and function

Hi all,
I created a sample component with service handlers but it is giving errors Unable to execute service GET_PURGE_LIST and function getPurgeList.
(System Error: The service method 'getPurgeList' is not defined.) Please let me know what changes to be made to fix this
Below are the files I used:
======================
ampfacpurgecontents_resource.htm
<html>
<head>
<meta http-equiv="Content-Type" content="text/html; charset=utf-8">
<title>
ServiceHandlerSample htmlIncludeOrString
</title>
</head>
<body>
<@dynamichtml custom_finish_layout_init@>
<$include super.custom_finish_layout_init$>
if (navBuilder)
if (isLoggedIn)
navBuilder.addChildNodeTo('MY_CONTENT', 'item', 'id==GET_PURGE_LIST',
'label=='+'Show Purge List',
'url==<$HttpCgiPath$>?IdcService=GET_PURGE_LIST');
<@end@>
</body></html>
===============================================
Services
======
servicehandlersample_service.htm
<html>
<head>
<meta http-equiv="Content-Type" content="text/html; charset=utf-8">
<title>
ServiceHandlerSample service
</title>
</head>
<body>
<@table ServiceHandlerSample_Services@>
<table border=1><caption><strong>Scripts For Custom Services</strong></caption>
<tr>
<td>Name</td><td>Attributes</td><td>Actions</td>
</tr>
<tr>
<td>GET_PURGE_LIST</td>
<td>DocService
0
PUTRGE_LIST_PAGE
null
null<br>
null</td>
<td>3:getPurgeList:GET_LIST:0:null</td>
</tr>
</table>
<@end@>
</body></html>
======================
service handler
============
servicehandlers_handlers.htm
<html>
<head>
<meta http-equiv="Content-Type" content="text/html; charset=utf-8">
<title>
ServiceHandlerSample htmlIncludeOrString
</title>
</head>
<body>
<@table SampleServiceHandlers@>
<table border=1><caption><strong>ServiceHandlers</strong></caption>
<tr>
<td>serviceName</td><td>handler</td><td>searchOrder</td>
</tr>
<tr>
<td>DocService</td>
<td>com.ameriprise.ServiceHandlerSample.getPurgeList</td>
<td>100</td>
</tr>
</table>
<@end@>
</body></html>
======================================================
ServiceHandlerSample.hda
<?hda version="10.1.3.3.3 (080807)" jcharset=UTF8 encoding=utf-8?>
@Properties LocalData
version=2013_09_25(build 1)
blFieldTypes=
ComponentName=ServiceHandlerSample
hasPreferenceData=false
blDateFormat=M/d/yy {h:mm[:ss] {aa}[zzz]}!mAM,PM!tAsia/Calcutta
@end
@ResultSet ResourceDefinition
4
type
filename
tables
loadOrder
resource
resources/servicehandlersample_resource.htm
null
1
resource
resources/servicehandlers_handlers.htm
SampleServiceHandlers
1
service
resources/servicehandlersample_service.htm
ServiceHandlerSample_Services
1
template
templates/servicehandlersample_template.hda
null
1
@end
@ResultSet Filters
4
type
location
parameter
loadOrder
@end
@ResultSet MergeRules
4
fromTable
toTable
column
loadOrder
ServiceHandlerSample_Templates
IntradocTemplates
name
10
SampleServiceHandlers
ServiceHandlers
null
1
@end
@ResultSet ClassAliases
3
classname
location
loadOrder
@end
========================
Java Class
package com.ameriprise.ServiceHandlerSample;
import java.util.*;
import java.io.*;
import java.net.*;
import intradoc.common.*;
import intradoc.data.*;
import intradoc.shared.*;
import intradoc.server.*;
public class GetPurgedList extends ServiceHandler {
public void getPurgeList() throws ServiceException, DataException
DataResultSet fullStockData = new DataResultSet(new String[] {"Sample Content",
"11111", "123", "Sept-25-13" });
String resultSetName = m_currentAction.getParamAt(0);
m_binder.addResultSet(resultSetName, fullStockData);
============================================================
Template
servicehandlersample_template.hda
<?hda version="10.1.3.3.3 (080807)" jcharset=UTF8 encoding=utf-8?>
@Properties LocalData
blFieldTypes=
blDateFormat=M/d/yy {h:mm[:ss] {aa}[zzz]}!mAM,PM!tAsia/Calcutta
@end
@ResultSet ServiceHandlerSample_Templates
5
name
class
formtype
filename
description
PUTRGE_LIST_PAGE
Document
null
purge_list_page.htm
null
@end

Hi Ashok,
In your servicehandlersample_service.htm the Service Class should be your package name and not DocService. Here is how it should be:
<@table ServiceHandlerSample_Services@>
<table border=1><caption><strong>Scripts For Custom Services</strong></caption>
<tr>
<td>Name</td><td>Attributes</td><td>Actions</td>
</tr>
<tr>
<td>GET_PURGE_LIST</td>
<td>com.ameriprise.ServiceHandlerSample
0
PUTRGE_LIST_PAGE
null
null<br>
null</td>
<td>3:getPurgeList:GET_LIST:0:null</td>
</tr>
</table>
<@end@>
HTH
- Anand

LabVIEW Interface VIs for SolidWorks/COSMOSMotion

Dear Sir/Madam
I am using softwares Labview 7.1, SolidWorks 2005, Cosmos Motion 2005 and LabVIEW Interface VIs for SolidWorks/COSMOSMotion. I try to solving my project entitled “Tracking of a Two Link Robot”. We give a point which includes X and Y as its coordinate system. To do so, robot will move to this point. However I have a problem to solve my project. Considering to Example(PID Example.vi from http://zone.ni.com/devzone/cda/epd/p/id/3402). that including one degree of freedom. I wish to solve a project with two degrees of freedom. I attached an image of my project in JPG formatting. Could you please let me have a solved problem in same case or helping me in this way?
Thank you so much for your attention.
Sincerely yours
Naser Sepehry
Attachments:
assem1.jpg ‏21 KB

Trevor,
This has been done for the TMS320C5410 at
http://www.ti.com/sc/docs/general/dsp/programs/shareware/apps_inst.htm
This will be helpful.
Roland

Regular Labview's VIs unable to execute in lego mindstorm labview module

Similar Messages

Maybe you are looking for