Regular tv shows and HD both load and I only want one!

Seems like sometimes when I download a tv show I will get the regular version and the HD version. I only want the regular version since it's cheaper so I delete the HD version but they are still in my Available Downloads list and every time I try to delete them, they come back! And every time I buy something new...they show up and start downloading again. How can I delete these HD duplicates of shows I already have once and for all??

Im not sure how to delete them, but there is a simple solution to not getting them at all:
When you download an HD version of something (TV show, Movie) you get BOTH the HD version, and then you get the STANDARD version free. Sort of like a bonus to put it on your iPod (if you have one) since they won't play HD versions.
Now, if they are still appearing in your queue to download, I would just let them download then delete the files. Either way, you paid for them.
On that note, though, you can send the iTunes folk an email saying that you downloaded the HD by mistake and they may credit your account back. That can be done by going into your account and using the "Report Problem" service.
blakewt

Similar Messages

  • Xcode building to both architectures when I only want one?

    I have a fairly simple (one source file) command line application in C which was written for Linux but ought to run in OSX as long as I can provide its dependencies (some GNU libraries). I compiled/installed the GNU libraries it needed using Fink. Fink only builds Intel binaries, since I am using an Intel Mac. Because of this, I need Xcode to only try to compile my little application as an Intel (i386) binary, and not try to make a PPC binary or a Universal binary.
    I opened "Project" -> "Edit Project Settings..." -> clicked on the "Build" tab and went to the "Architectures" setting. I made sure it said only "i386" and did a Clean and then another Build. However I can clearly see in the build log that Xcode is invoking the compiler and linker twice each -- once for each CPU architecture. After compiling the PPC version of my code it will fail to link, because there are no PPC versions of its dependencies (the GNU libraries).
    Why is Xcode doing this, and is there a second setting that I haven't found, to make it ONLY build an Intel binary?

    I tried your experiment and saw a similar problem... I'm on a PPC Mac though. Initially the standard tool was building a Universal Binary even though the Project Info -> Build -> Architectures was just set to "ppc".
    So first I tried going to the "General" pane of the Project Info window and switching the pop-up at "Cross-Develop Using Target SDK:" from "Mac OS X 10.4 (Universal)" to "Current Mac OS"... That still tried to build a universal binary only this time I got several errors on the Intel link phase because the "Current OS" SDK contained no Intel libraries.
    However there appears to be a different Architectures setting on a per Target basis.
    In your "Groups & Files" pane expand the "Targets" group and select your target. Then click the "Info" button in the toolbar (or select "File -> Get Info") to get to the Target Info window. Select the "Build" pane... On my machine the "Architectures" setting here was set to both "ppc" and "i386". Turning off the "i386" here fixed my problem and allowed it to build only for ppc.
    I'm not sure how these Target settings roll up into what you see in the Project settings. But it does seem kind of odd.
    Steve

  • I'm in a multi-page document, how can i rearrange the pages or insert blank pages in front of pages? Also, is there a way to show the ruler both horizontally and vertically?

    I'm in a multi-page Pages document, how can i rearrange the pages or insert blank pages in front of pages? Also, is there a way to show the ruler both horizontally and vertically?

    Not on my document. I have a 7 page document open. The "flashing vertical bar" is at the top of page 3. I have the thumbnail view showing. I click page break and two blank pages are added to the end of my document. I have to scrool thru the pages to see that the 2 pages were added as they do not appear in the layout view... I'm not sure if it is inserting a "section" as it adds two blank pages.. But I am clicking on "INSERT PAGE BREAK".. So guess there are still a lot of bugs to fix..
    Thanks again

  • JavaMail - HTML with images - Images show up as both inline and attachment

    Hi,
    I am writing a program to send email which have
    1. HTML template which references images via the content-id mechanism
    2. A PDF document
    The mails are being rendered properly in Outlook, Gmail and Yahoo (the images show as inline and the PDF as attachment), however in hotmail the images are showing up as both inline and as attachment.
    When creating the email using JavaMail I am using the following structure
    ...multipart/mixed
    ......multipart/related
    ..........HTML Code
    ..........Images
    ......PDF file (as a MimeBodyPart)
    Is there something which I missed here or do I need to live with the way hotmail renders the email.
    Thanks.

    Yes the disposition is being setup correctly .. here is the dump of the mail (without the base64 encoded data)
    MIME-Version: 1.0
    Content-Type: multipart/mixed;
         boundary="----=_Part_0_17459938.1279571019577"
    ------=_Part_0_17459938.1279571019577
    Content-Type: multipart/related;
         boundary="----=_Part_1_13205705.1279571019612"
    ------=_Part_1_13205705.1279571019612
    Content-Type: text/html; charset='iso-8859-1'
    Content-Transfer-Encoding: 7bit
    HTML code here..
    ------=_Part_1_13205705.1279571019612
    Content-Type: image/jpeg
    Content-Transfer-Encoding: base64
    Content-Disposition: inline; filename=Img01.jpg
    Content-ID: <Img01>
    base64 dump here..
    ------=_Part_1_13205705.1279571019612
    Content-Type: image/jpeg
    Content-Transfer-Encoding: base64
    Content-Disposition: inline; filename=Img02.jpg
    Content-ID: <Img02>
    base64 dump here..
    ------=_Part_0_17459938.1279571019577
    MIME-Version: 1.0
    Content-Type: application/pdf; charset=ISO-8859-1; name="Test.pdf"
    Content-Transfer-Encoding: base64
    Content-Disposition: attachment; filename="Test.pdf"
    base64 dump here..
    ------=_Part_0_17459938.1279571019577--

  • I have loaded Lion on my MacBook and the new trackpad functions work only on one ordinary account or user and not on the admin account. The trackpad preferences are well set. What can I do?

    I have loaded Lion on my MacBook and the new trackpad functions work only on one ordinary account or user and not on the admin account. The trackpad preferences are well set. What can I do?

    iCloud should still help you reduce some hard drive space. Just select "optimize" in the icloud tab in Mac Photo App preferences.
    Granted, not the same as completely offloading your library to a back-up drive at your location.
    Good Luck!

  • I recently spilled liquid on my computer, but it is up and running, it loads and brings me to the safe boot screen where I need to type my password, but It is not recognizing it, help! How do I get passed it or fix it!

    I recently spilled liquid on my computer, but it is up and running, it loads and brings me to the safe boot screen where I need to type my password, but It is not recognizing it, help! How do I get passed it or fix it! I have tried holding the apple key and "s" and then type in the code to reset the password, but my keyboard is not letting me use the numbers or any keys that are accessed by holding shift! Please help me get passed this screen

    Fluids and electronics do not mix.
    You have caused some serious damage to parts of your computer, and likely voided the warranty until Apple completes a repair and re-certifies it.
    Step one is to turn it off and do NOT (did I say do NOT yet?) turn it on again yourself.
    Take it to an Apple store and be prepared for a large repair bill.
    Sorry, but that is the truth.

  • HT4279 I have a Macbook Pro (late 2012) and I would like to connect it to 2 screens simultaneously (1 screen is a TV and can only take HDMI, the other is a larger computer screen and has both VGA and HDMI connections). How can I do this?

    I have a Macbook Pro (late 2012) and I would like to connect it to 2 screens simultaneously (1 screen is a TV and can only take HDMI, the other is a larger computer screen and has both VGA and HDMI connections). How can I do this?

    The article you cited refers to The Mac Pro, a 50lb silver tower -- not a notebook computer.
    Everymac.com says:
    2nd Display Support:
    Dual/Mirroring*
    2nd Max. Resolution:
    2560x1600 (x2*)
    Details:
    *This model supports a simultaneous maximum resolution up to 2560x1600 on two external displays via Thunderbolt. Alternately, it can support a single display up to 2560x1600 via Thunderbolt and a single display up to 1920x1200 via HDMI. Although it can theoretically power all three external displays, as confirmed by a helpful reader, it runs too hot with three displays connected.
    Also see: How many external displays can the Retina Display MacBook Pro models support? What is the maximum supported resolution of each? Are adapters required?
    When using other than ThunderBolt displays, the ThunderBolt port is directly compatible with Mini DisplayPort, and can be forced into compatibility (with Single-Link DVI or HDMI up to 1920 wide) with a simple adapter.
    To adapt to wider displays, an ACTIVE Dual-Link adapter is needed, about US$100.

  • All my PC's and computer(both Apple and Microsoft) will conect to internet except appleTV I have exhausted all resets, It did work yesterday now no connection

    All my PC's and computer(both Apple and Microsoft) will conect to internet except appleTV I have exhausted all resets, It did work yesterday now no connection Has anyone had same problem ?

    Resets are not a solution.  Have you done any actual trouble shooting?  What is the actual symptom you are experiencing?  If you are using WiFi have you tried directly connecting it using a wired connection.

  • On 26th january apple iphone 4 launch or not?? and launch both 8 and 16gb???

    on 26th january apple iphone 4 launch or not?? and launch both 8 and 16gb???in india ??

    The article linked to does NOT constitute an official statement or announcement by Apple.
    Rumors and speculation are prohibited by the terms of service here. Officially, the iPhone 4 is discontinued. Apple has made no formal statement to the contrary.
    Unless and until Apple makes an announcement, don't hold your breath waiting for this to happen.

  • HT4915 How do you stop syncing address and calendar to iCloud? I only want to sync  from my computer to iPhone.

    How do you stop syncing address and calendar to iCloud? I only want to sync  from my computer to iPhone.  This is because I cannont upgrade to Lion and I do not want to get duplicate contacts when I sync from the computer 10.6.8 to my iPhone iOS5.  You should not upgrade to Lion upless you have 4GB of ram. Lion does not support rosita so all your old programs will not funtion and you have to repurchase all old software the is working fine.

    Welcome to the Apple Community.
    Settings > iCloud, turn off contact and calendar syncing.

  • I created a watermark in LR4 and it applied to all photos I only wanted one photo marked.

    I created a watermark in LR4 and it applied to all photos I only wanted one photo marked. How can I keep it from adding the watermark to all of my photos?
    I want to be able to add them manually to each photo in a location that I chose so the photo is still visably appealing.
    Thanks!

    I think it's a feature of the Web Module, since it is assumed that you would want the watermark on all images of a web-gallery.
    But, in this context (as always is the case in Lr) you have to take into consideration of how Lr works. Lr never ever changes your originals.
    "Watermark applied" means only that there is a set of data in the Lr catalog that says something like "when uploading the web-gallery the watermark has to be applied to the uploaded JPGs".
    Nothing has been done to your originals - even though they are displayed in te Web Module with the watermark. The orginals are ever unchanged.
    If you go back to the Library Module (within the same Collection) you won't see a watermark.

  • When I load pictures, I only see one page, on the next pages the pictures are grey, how to slove this?

    When I load pictures, I only see one page with pictures. On the next page the pictures are grey. How to slove this?
    Thanks a lot.

    Sorry, I don't think I made myself clear on what I am trying to do.  I am looking for a way to do this process a lot quicker.  Sometimes these agendas could be 100 pages.  Since I can only select text from one page at a time from the PDF after I scan it, this takes up so much time.  What I am looking for is a way to open up the PDF file after scanning and be able to select text from all the pages and cut and paste into word.  For example:
    I scan 20 pages and save to PDF
    I can view all 20 pages - pages 1 to 20
    I want to highlight text starting at the beginning of Page 1 and ending on the last word on page 20?
    Cut and paste everything into word
    Is there a way to do this or should I be using another Adobe product to accomplish?
    Thank you.
    Cathy

  • TS3276 Does anyone have problems with sent messages not showing in their Mail? I have two sent folders when really I only want one. Any tips?

    Does anyone have problems with sent messages not showing in their Mail? I have two sent folders when really I only want one. Any tips?

    Not sure if this is a fix, but I tried sending myself a test email from only  the Bcc field, and lo and behold it now shows the Bcc field in all sent item previews;
    ...maybe leaving the 'To' field blank on purpose forced Mail to show it.
    Rebooted the Mail program, still there - rebooted the machine, still there. Hope this is still relevant and it works for you too - J.

  • All my external Hard Drives stopped showing up in both Finder and Disk Utility

    Hello there.
    i have this strange issue that occured just out of nowhere without me (knowingly) having contributed anything to it.
    yesterday i launched my iMac and my external firewire drive wasn't showing up in neither the finder nor on the desktop. i instantly thought about a hard drive crash, but soon tried other things to evaluate (or not) my guess.
    for instance, i unplugged the drive waited a few minutes before i plugged it in again. since this iomega drive is also equipped with a regular usb port i also switched cables and tried connecting it via the iMac usb sockets as well as via an usb hub without any luck. the drive still won't show up. so i launched the Disk Utility, to see if the drive needs some checking/repairing, but to my surprise it wasn't showing in Disk Utility either.
    thus far i only considered this to be an issue with only this particular external drive, but when i eventually switched on a 2nd external drive (this time an usb drive i use for Time Machine) that drive also refused to show up in either the Finder or the Disk Utility app.
    curious as i was, i then fired up a 3rd and 4th external drive and now had all 4 drives running at the same time. none of which were showing up, just as if they weren't even connected with the iMac.
    this strikes me as more than odd. i've heard about hard drive failures and crashes. they just occur over time. maybe and under some very strange coincidences it is possible that two external hard drives quit their jobs at the very same time, but seriously .... 4 of them?? i hardly think so.
    well, maybe it's the iMac's usb/firewire controller that's causing the trouble, i thought. but then again, my other connected devices (iPhone, iPad, Printer, Scanner, eyeTV) are functioning and get detected just fine as far as i can tell.
    i have no idea what's going on. i dismiss the idea of 4 external drives having crashed all at the same time just as much as i don't think that the iMac's usb/firewire controller has got any issues. re-formatting any of the 4 drives is out of the question and even if i'd consider such desperate measures, the Disk Utility wouldn't let me re-format anything anyhow, because the drives aren't listed there. i wish i could just use my Time Machine to resolve the issue but, as i mentioned earlier, i can't access the Time Machine because it also won't show up.
    please, i need an expert's help here. please, somebody bring back my 4 external drives so i can access them in finder again.
    any help will be much appreciated.
    thank you in advance..
    ..Otis

    Launch the Terminal application in any of the following ways:
    ☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
    ☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
    ☞ If you’re running Mac OS X 10.7 or later, open LaunchPad. Click Utilities, then Terminal in the page that opens.
    Drag or copy — do not type — the following line into the Terminal window, then press return:
    diskutil list
    Post any lines of output that appear below what you entered — the text, please, not a screenshot.
    If any personal information appears in the output, edit before posting, but don’t remove the context.

  • Edge animation fails to load first time in Opera, Crome  but work in Firefox and Safari, both localy and

    Hi guys, I have quite a serous problem here, I have a Adobe Edge Animation (done in CC) that fails to load the first time in Opera and Crome but does work in Firefox and Safari. It fail to load every time coming from another page.
    The problem persist both locally and online. It does work in preview every single time.
    I you can push me in the right direction, that would be great.
    Thanks!
    Here you can see the animation:
    http://tierraburritos.com/test/laCarta.html

    It seems to because of a style insertion error in animate library/content
    Is it possible for you to share/mail your files with us,we can isolate the issue.

Maybe you are looking for