Regza 32AV615DG changing canals and increasing volume. Uncontrollable.

Hello, i don't know if this is the right place to ask questions like this, excuse me if its not.
The TV switchs between canals and making up and downs with volume. The controller is fine, i've tested by removing batteries aswell and the TV keeps doing it.
I've been having this problem for long time now and i was thinking if it was any driver update i had to do.
If anyone knows where i can find one or how to solve my problem, i'll be grateful.

That doesn't appear to be a US model, and this is the forums for Toshiba USA. You may want to contact Toshiba in your region.
- Peter

Similar Messages

  • HT4528 how do i increase volume for incoming calls and incoming text?. i have it to max

    i have incoming and text messaging to the maximum volume. How can i increase it?

    If while you are in Messages and set the volume, that is all you can get. You can try and see if Volume Limit is checked by going to Settings>Music and see if Volume Limit is off.
    The only other thing I can recommend, is to create your own ringtone/text tone in a music editor and increase the volume in the file. You may also want to check your speaker area and see that it is clean and not blocked by any debris.

  • Pan settings and sometimes volume levels change during playback

    pan settings and sometimes volume levels change during playback without my touching them in Logic X! I haven't set any automation and strangely a similar thing happened to some plug-ins i used in pro tools m-powered. Any ideas as to why this is happening would be greatly appreciated? Cheers

    pan settings and sometimes volume levels change during playback without my touching them in Logic X! I haven't set any automation and strangely a similar thing happened to some plug-ins i used in pro tools m-powered. Any ideas as to why this is happening would be greatly appreciated? Cheers

  • Reduce background noise and increase audio volume?

    Hi!
    I have a movie with very bad static/background noise and low volume. I've been playing around the NewBlue cleaner AB, but I have yet to get a satisfactory results. Any hints/tips that might help me out? Or is it not powerful enough to get a good result?
    Also, I've noticed the volume becomes even lower after running the filter.
    How do I adjust the "clip volume" in edit effects past 6dB? If this is not possible, why?
    Thank you!

    Well, increasing the audio volume is easy. But doing it without also increasing your background noise is much harder. In fact, unless it's of a specific frequency that you can filter out, it's pretty much impossible. That's why a lot of Hollywood movies and TV shows have to "loop" or re-record dialogue for a scene if there was too much wind or background noise.
    The easiest way to raise a clip's audio level is to click on it and select Audo Gain, and then increase the gain level.
    This, though, won't get rid of the background noise.
    Bill Hunt has some tips that may be helpful.
    http://forums.adobe.com/thread/572518?tstart=0

  • I have adjusted the settings to max and the volume button on the side to max, is there any other way to increase ringtone volume?

    I have adjusted the settings to max and the volume button on the side to max, is there any other way to increase ringtone volume?

    you can connect an amplifier to the 3.5mm minijack but it will require batteries or AC power to amplify of cause

  • When I turn on my ipad2 the volume box appears and does not go away until i hit the volume button on the side and the increase volume button does not seem to funtion only the lower section does?

    I need help. I got an ipad 2 for Christmas and the volume box appears every time I turn it on and it won't go away until I hit the side volume button.  I also realized that the upper portion of the volume key does not seem to work properly.  Any solutions?

    i face totally similar problem so i think its a software flaw. but mine got on quite a long time.
    what should i do, i dun like going to the store in exchange for a refurb one

  • Why do the sound balance settings change every time i start up my MacBook Pro OSX 10.8.4. I set balance to middle and it reappears way off to the left or right and the volume is at maximum.

    I set the balance and sound levels on my MacBook Pro 10.8.4 but when I start up again the balance has shifted to one channel or the other [left or right] and the volume has become maximum. Does not always happen but frequently does. Any ideas?

    It should remain the way you have adjusted them.  Delete the System Preferences.plist per these instructions:
    https://discussions.apple.com/docs/DOC-4301
    Ciao.

  • I have just purchased my Iphone 4s, and the volume of the sound is very low, I can hardly hear the other person. I have tried the button for higher volume, but there is no change

    I have just purcahsed my Iphone 4s, and the volume is very low, I can hardly hear the other person talk. I have tried the botton for higher volume, but it doesn`t work. Can anybody give me an answer to what is wrong?

    Did u take out the screen protection?

  • Want to increase volume on my laptop

    Want to increase volume on my laptop but nothing I have tried works. 

    Hi,
    One thing can may help a little is the following.  Right click the speaker icon in the Taskbar and select 'Playback Devices'.  Left click the default device once to highlight it ( it's usually 'speakers & headphones' ) then click the Properties button.  Click the Enhancements tab and put a tick in the box next to 'Loudness Equalization'.  Click Apply to save the change and then click OK in all remaining windows and see if this has helped at all.
    Regards,
    DP-K
    ****Click the White thumb to say thanks****
    ****Please mark Accept As Solution if it solves your problem****
    ****I don't work for HP****
    Microsoft MVP - Windows Experience

  • Volume gain fluctuation problem in iPad(random decreasing/increasing volume) with audio monitoring enabled.

    I have one bass track and a drums track picked from loops and when playing the guitar(iPad2 with apogee jam connected) with monitoring enabled I get gain fluctuation problems(random decreasing/increasing volume, some times mute). When I stop playing the guitar audio feedback gets back to normal.
    Any idea?

    Hi George Ward2
    I'm wondering if you accidentally or unintentionally locked the audio in a segment/s where you intended to fade up or down. Altho you say it plays fine when you review it in iMovie. The place to review it is in iDVD. However adjustments are made in iMovie for the actual audio and video. Here's what I found in the Help Menu for iMovie since there isn't much info on the iDVD portion of the help menu for the same symptoms:
    Making your movie louder or softer:
    If you find that all or part of your movie is too loud or too soft, you can adjust the volume of your movie in the timeline viewer. You can increase or decrease the volume of the entire movie or just specific audio clips. For example, at a certain point in a video you might dramatically increase or decrease the volume of accompanying music.
    IMPORTANT: These instructions are for setting the volume of video that people will hear as they play your movie. If you only want to adjust the volume of your computer's speakers, see "Adjusting the volume of your computer in iMovie HD" below.
    To make your movie louder or softer:
    Click the Timeline Viewer button (shown above).
    Select the clip or clips whose volume you want to change in the timeline viewer.
    Tip: To learn how to select multiple clips, see "Selecting clips" below.
    Click the clip volume button (shown below), and then drag the slider to adjust the volume.
    Tip: You can also type a new percentage in the field next to the clip volume button to adjust volume.
    You can also make finer audio adjustments within a clip. For more information, see "Fading audio up or down."
    Just out of curiosity .... is the source audio 12 bit or 16 bit?
    Hope this is helpful and good luck.
    SDMacuser

  • I cannot increase volume on Voice Memo

    Does anyone know how to increase volume on Voice Memo?
    I almost do not hear my messages (unless I shout or put my phone in front of my lips and talk loud).

    Just got a 3GS today and this volume problem was one of the first things I noticed. This has to be fixed - teling people they have to use a headset mic or somesuch, when the speakerphone usage of the built-in mic works just fine, is a cop-out. Obviously an oversight ("bug") in the code. Now if someone could just figure out what the file type of the voice memos is, one could take the files of 3rd party apps that do record at a proper volume and make iTunes recognize them as voice memos. If Apple's going to release something they consider a core iPhone app in this shoddy condition, it's only fair if we get some sort of functional workaround rather than wait for someone's bugfix inbox queue in Cupertino to get caught up on.

  • How to change printer and or system settings to print in color

    How to change printer and or system settings to print in color

    You can change the brightness with an RGBImageFilter which converts the rgb values to HSV, increases the value, and converts back to rgb.

  • My plus and minus volume control doesn't work.. Is there any way of turning them on or off? Or is my phone faulty?

    My plus and minus volume control doesn't seem to work.
    Can I switch the volume on?

    Hi Timjazzhair,
    Go to Settings ==> Sounds and in 'Ringer and Alert' set 'Change with Buttons' to YES.
    Woops! Meg beat me to it!

  • I was on facetime and the volume just stopped...the person I was talking to couldn't hear me

    I was on facetime and the volume just stopped working and the person I was on with could not hear me. I ended up turning and leaving it off and then it worked. Any insights on why this happened? Should I take it to someone to check it out? I have only had it 2 weeks.

    Try changing the volume settings on  the device.  
    Volume Key:
    Press the long volume key on the side of the phone up or down to adjust the volume while on a call.
    When you are around noisy surroundings you might want to try a noise  canceling headset or device to block out background environmental noise. By blocking background environment noise, noise canceling headsets  or devices should allow you to be hear more clearly and be heard by others more clearly.  
    Copy and paste the link below into you browsers address bar for more information.  
    http://www.verizonwireless.com/b2c/store/accessory?categoryId=12&action=refineByCategory
    http://www.verizonwireless.com/b2c/store/accessory?action=accessoryDetails&archetypeId=12462&accessoryId=46569

  • My new Nokia Lumia 800 changes date and time after...

    When i switch off and on my Nokia Lumia 800, date and time changes: from 2 september 2012 8.00 to 2 march 2013 14.00. I need help to understand this strange problem and find a solution.

    chrysale wrote:
    I had the same problem with my Lumia 800. The Lumia 800 kept changing time and date as soon as I switched it off and turned it back on. In my case, doing a HARD RESET helped to fix this. BEWARE! You will lose all your data!
    Switch off your phone, hold Volume Down, Power, Camera buttons down. Switch phone on. As soon as it vibrates, release Power button, keep Volume Down and Camera button pressed for a few seconds.
    I have the same problem and after going through all the various support sites- Nokia, O2, and endless forums I was told the same thing "Make sure your auto-update for date and time is switched to automatic" But after telling them I don't know how many times that my Lumia 800 didn't have this option, only a 24 hours switch I was told there was nothing that could be done. However I appear to have sorted it out myself. The problem appears to be (or on my phone at least) is wi-fi connection, before I turn my phone off I have to disconnect from wi-fi and when I turn the phone back on the date and time stays corrected.
      When I set the date and time manually (for the 3000th time!!) I held in the power button until the slide down close screen disappeared then released it and the phone restarts, then I done it again- same proceedure just to be sure and ever since the date and time has stayed correct. BUT BE SURE TO TURN OFF WI-FI BEFORE SWITCHING PHONE OFF. Hope this helps

Maybe you are looking for