Reinserting Preview/Images missing from Library and Project

After ingesting my images from CF reader into a project, I started working on them. For some reason after working on them for awhile, I started noticing that previews were missing from the project. I looked in the Library and they were not there either. However, when I looked in to the project folder (via the Aperture "folder" in Finder), the images and associated Aperture information files were all there in their respective folders.
I'm not sure how I lost/deleted so many images from my folder and Library (I may have accidently deleted a stack, but when I searched the number of images missing I know I could not have accidently deleted that many that way if I did). But since the files are still on my hard drive in their respective folders, in the right location, is there a way to bring them back into Aperture?
Thanks,
Ed

bump...if anyone can tell me that would be great. I know it sounds like a dumb question, but for the life of me I cannot do any command - import, etc. - that can get these files that reside in the actual folder to show up in Aperture's Library or its original project.
Thx,
Ed

Similar Messages

Files missing from library after archive and install

Hi forum folk
any help you could give would be much appreciated.
I can't seem to verify my permissions on HD. I have run disk utility both from finder and from my OSX startup disk and consistently get the error message "Disk Utility has lost its connection with the Disk Management Tool and cannot continue." I then reinstalled the operating system all together making sure to archive and install as well as archive previous network and preference settings. This means I am running 10.3.4 at the moment (and I can't verify any of the software updates at the moment). After reinstalling I still cannot verify my permissions, so now I am trying to back up all my files so that I can reinstall the OSX again, erase everything, and start from scratch. But I'm running into some very strange problems while doing this. select files are missing from ~/library. there is no Safari file, for example. I tried looking in HD/previous systems/library where my library files were saved before I reinstalled the operating system but there is no such folder in there either. this means all of my bookmarks are gone. additionally, under library/preferences (in both the old and new library folders) there is no file named com.apple.itunes.plst. so all of my itunes playlists are gone as well. these are the only missing files I have found thus far and i can't explain why they selectively would not have been saved after the archive and install. Everything else seems to be intact. Any ideas?
thanks
jb
powerbookG4 Mac OS X (10.3.9) running 10.3.4 at the moment - can't verify permissions on 10.3.9

jbeep:
my HD has a capacity of 8.85 GB available. When I reinstalled panther I had little more than 3 GB available (I deleted a bunch of unneeded things since then)
Thanks for this update. What is the total formatted capacity of your HDD? I ask because I suspected that you might be cutting it pretty close. The rule of thumb is that you should have 10-15% of your total capacity available as free space. My personal rule is 15%-20%. This allows for more efficient perfomrance of OS X.
I am in the process of backing up everything on my seagate combo USB 2.0/firewire 200 GB external (I am using the firewire cord)
Having an up-to-date backup is one of the primary rules, often observed more in the breach than not. Since you have an HDD that supports Firewire, I suggest that you make a bootable clone of your entire HDD using SuperDuper. You can then use this backup as an emergency boot drive. However, it must be Firewire, as PPC Macs don't boot from USB devices.
I also have heard that it is advisable to reinstall the OS "every now and again" and I hadn't done this for at least two years. was I ill-advised?
Most experienced Mac users never re-install, except under dire circumstances. Since installing my new HDD in this computer I have never re-installed. Re-installation is the utlimate intrusive measure, and it exposes one to all kinds of issues, from lost data, to flawed installaton, to installations that fail midstream. Re-installation is not an effective maintenace procedure. Here are some helpful links in terms of maintenance:
Mac OS X 10.3/10.4: System maintenance
Macintosh OS X Routine Maintenance
Maintaining OS X.
I'm going to restart now and try and verify my permissions again using the procedure on the above link. I'll let you know what happens.
Instead of verifying permissions, just go ahead and Repair Disk Permissions. Verifying permissions does nothing, and wastes your time, as it is difficult to tell whether you need to repair, and you have to repair anyway.
Do post back with an update of your progress and any further questions or comments.
Good luck.
cornelius
Message was edited by: cornelius

VM template image missing from OVM Server 2.2.0

Hi,
We have configured couple of linux OVM images on OVM server 2.20. These images were running successfully from 1 month , suddenly we found 1 of the VM image missing from the /OVS/running_pool directory. Can you let me know if there is any bug in OVM 2.20 as we are running 100 of VM's and VM's image missing could be big issue in future.

Welcome to the forums !
The scripts should be available in the companion directory of the CD
http://download.oracle.com/docs/cd/B19306_01/server.102/b14198/installation.htm#I4367
HTH
Srini

[svn:fx-trunk] 11376: Remove external image support from BitmapImage and BitmapFill.

Revision: 11376
Author:   [email protected]
Date:     2009-11-02 11:39:44 -0800 (Mon, 02 Nov 2009)
Log Message:
Remove external image support from BitmapImage and BitmapFill.
QE notes: none
Doc notes: ASDoc updated. Any other docs that mention loading external images in BitmapImage, BitmapFill, or Border need to be updated.
Bugs: none
Reviewer: Jason
Tests run: checkintests, cyclone
Is noteworthy for integration: Yes
Modified Paths:
    flex/sdk/trunk/frameworks/projects/framework/src/mx/graphics/BitmapFill.as
    flex/sdk/trunk/frameworks/projects/spark/src/spark/components/Border.as
    flex/sdk/trunk/frameworks/projects/spark/src/spark/primitives/BitmapImage.as

That PKGBUILD doesn't work, primarily because _svnmod is not set correctly. The remaining problems are mostly down to not being in the $srcdir directory when checking out the ImageMagick source. It's also good practice to copy the source and do the build in the copy. That way, it will be possible to successfully update the source and rebuild the package at a later date. Otherwise, the PKGBUILD certainly works with the following modifications but I've no idea whether the package is viable because I didn't try installing and testing it.
_svntrunk=https://www.imagemagick.org/subversion/ImageMagick/trunk
_svnmod=ImageMagick
build() {
cd ${srcdir}
if [ -d $_svnmod/.svn ]; then
cd $_svnmod
svn up
else
svn co $_svntrunk $_svnmod
fi
rm -r ${srcdir}/${_svnmod}-build
cp -r ${srcdir}/${_svnmod} ${srcdir}/${_svnmod}-build
cd ${srcdir}/${_svnmod}-build
if [ "${CARCH}" = "x86_64" ]; then
patch -Np1 < ../libpng_mmx_patch_x86_64.patch || return 1
fi
Etc., etc.
Last edited by azleifel (2010-04-11 22:15:09)

IOS 6 installed data wiped/ missing from itouch and iPhone, help

Just installed latest software.
iOS 6 installed, data wiped/ missing from itouch and iPhone on calendars and contacts. help

Restore from backup. See:
iOS: How to back up
If you restore via iTunes make sure that all the apps are in the iTunes library since they are not in the backup.
You can redownload iTunes purchases by:
Downloading past purchases from the App Store, iBookstore, and iTunes Store

Jasper report on HTML when one image loaded from database and for the other

How to generate jasper report on HTML when one image loaded from database and for the other we give a image path
My code
ByteArrayOutputStream baos = new ByteArrayOutputStream();
          exporter = new JRHtmlExporter();
          exporter.setParameter(JRExporterParameter.JASPER_PRINT, print);
          exporter.setParameter(JRExporterParameter.OUTPUT_STREAM, baos);
          exporter.setParameter(JRHtmlExporterParameter.IMAGES_URI, strImageInputDirectory);
     exporter.setParameter(JRHtmlExporterParameter.IMAGES_DIR_NAME, strImageOutputPath == null ? "." : strImageOutputPath);
     exporter.setParameter(JRHtmlExporterParameter.IS_OUTPUT_IMAGES_TO_DIR, Boolean.TRUE);
     exporter.setParameter(JRHtmlExporterParameter.IS_USING_IMAGES_TO_ALIGN, Boolean.FALSE);
     exporter.setParameter(JRHtmlExporterParameter.IS_WHITE_PAGE_BACKGROUND, Boolean.FALSE);
          exporter.exportReport();
          byte[] bdata = ((ByteArrayOutputStream) baos).toByteArray();
Can any one help pls
Message was edited by:
ameet.au

hey sorry for posting it in this forum.
but do u have sample code for making it work.. since i am able to do it on PDF format(image from Database and another stored in the webserver) using
byte image[] =(byte[]) outData.get("image");
                    ByteArrayInputStream img = new ByteArrayInputStream(image);
                    hmimg.put("P_PARAMV3", img);
print = JasperFillManager.fillReport(reportFileName, hmimg, jrxmlds);
bdata= JasperExportManager.exportReportToPdf(print);

TS1717 try to open and says program can't start because MSVCR80.dll is missing from computer and says windows error 126

try to open itunes on my computer and get messageprogram can't start because MSVCR80.dll is missing from computer and a windows error 126 comes up

Hi arw8669,
If you are having issues with iTunes after an attempted update, you may find the following article helpful:
iTunes 11.1.4 for Windows: Unable to install or open
http://support.apple.com/kb/TS5376
Regards,
- Brenden

HT2493 How to change preview image of a file and NOT the icon ?

Hello dear Mac users
How to change preview image of a file and NOT the icon ?
I know how to change the icon of a file, but I wish to know how to change the preview of any file.
For example: my file is "mysong.aif", I changed the icon to be "mylogo.png" using cmd+i, cmd+v on the icon. But the preview of the file still remain the same.
I know it can be changed using iTunes, but I don't want to import all my files in iTune, and iTune cannot import all type of files.
I hope someone will understand my needs...
Thanks!

Thanks BeerbarX
You can't change the preview image for anything
hoo
QuickLook plugin
what are the plugin ?
In the case of a music file, it will be that generic black box with a note on it
That is exactly what I'm asking about !
MP3 which has a special tagging standard that can include artwork
How can I "tag" my MP3 without going thru iTunes ? Is it possible to do it dirrectly in the Finder ? Is there other type of files that can include such tags ?
Thank you for answering my question , wich I have to admit may seem useless, but I wish I could put something like a signature logo on each of the different file I produce (as AIF for music and MP4 for video clip) instead of that generic black box with a note on it, and by the meantime keeping a different icon for all of them in order to illustrate theire content.

HT203167 My App Store icon is missing from ipad and won't re-install?

My App Store icon is missing from ipad and won't re-install? You can't delete it so where is it?

If you can't find it on any of your homescreens or app folders, and you can't find it via the spotlight search screen (swipe your first home screen to the right), then is it hidden by Settings > General > Restrictions > Installing Apps being set 'off' ?
If not then have you tried a reset to see if you can find it after the iPad has restarted ? Press and hold both the sleep and home buttons for about 10 to 15 seconds (ignore the red slider), after which the Apple logo should appear - you won't lose any content, it's the iPad equivalent of a reboot.

My Mac mini won't recognize photo library in itunes so I can download pics from library and free up space in memory, I was able to download camera role but not photo library that takes up more space.

My Mac mini won't recognize iphone 4 photo library in itunes so I can download pics from library and free up space in memory, I was able to download camera role but not photo library that takes up more space. Help thanks

The photo sync is one-way: Computer to phone. Photos synced to your phone will have to be extracted from your phone using third-party software, if you want them on your computer, as Apple makes no provision to do so. Since you're using a Mac, you can use this:
http://www.ecamm.com/mac/phoneview/

My icons are missing from finder and Safari.

Not sure what I have done. My icons are missing from finder and Safari, tired the customise tool bar option with no joy, please help.

Try this - Reset the iPad by holding down on the Sleep and Home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider - let go of the buttons. (This is equivalent to rebooting your computer.) No data/files will be erased. http://support.apple.com/kb/ht1430
 Cheers, Tom

All my photo's are missing from iPhoto and I'm getting a message "your photo library is either in use by another application or has become unreadable"

Yesterday when I opened iPhoto all of my photo's were missing. After many hours of frustrating time looking how to resolve, I decided to try again this morning. When I tried to open iphoto, I got the message I referenced above regarding the library is either in use or has become unreadable.
My photos are not in iPhoto anymore. There's nothing there. iphoto acts like its never even been set up. I have iPhoto '11 version 9.4.3. I have OS X Lion version 10.7.5. However, when I go to "All My Files" and then under "images", there are over 10,000 images. I see my photos (I guess it's all of them - i have no idea how many there were) and other "images" also. When i go to "pictures" I only see the 15 or so items I have scanned. In "iPhoto Library", there is 1 picture of what looks like a deck of playing cards with flowers on them - I don't know where that came from. But also in "iPhoto Library" under the heading "desktop", it shows a size of over 27GB and under "kind" it says "package". Still under desktop and "Photo Booth Library" it shows 53GB and under "kind" it says "Photo Booth Library". Before I opened iPhoto to view my photo's, I went to "empty trash" yesterday (not in iPhoto) and it showed over 65,000 items to delete. There were no more than 200 that I could actually see. So, I don't understand. I let it delete a couple of thousand before I stopped it because I didn't know what it was doing. I know - not too smart. I don't know if that has anything to do with iPhoto or not; I'm just throwing that out there. Today I went to "empty trash" and it now shows the 200 items that I can see in there. Don't know what happened.
I do have a time capsule but not sure if I’m using it correctly. If you were to tell me to restore to a certain point, I’d have to be walked thru the process.
I downloaded “iPhoto Library Manager”, not exactly sure how to use it, but got a message basically saying the library nor the database could be loaded and that album data file for the library “iPhoto Library” could not be read.
I’ve spent hours and hours and hours searching the web for answers but I’m scared to do much of anything thinking I could end up losing all my photos if I haven’t already.
Please help!
Thank you!
James

Apply the two fixes below in order as needed:
Fix #1
Launch iPhoto with the Command+Option keys held down and rebuild the library.
Since only one option can be run at a time start
with Option #4 and then #1 as needed.
Fix #2
Using iPhoto Library Manager to Rebuild Your iPhoto Library
1 - download iPhoto Library Manager and launch.
2 - click on the Add Library button, navigate to your Home/Pictures folder and select your iPhoto Library folder.
3 - Now that the library is listed in the left hand pane of iPLM, click on your library and go to the File ➙ Rebuild Library menu option.
4 - In the next window name the new library and select the location you want it to be placed.
5 - Click on the Create button.
Note: This creates a new library based on the LIbraryData.xml file in the library and will recover Events, Albums, keywords, titles and comments. However, books, calendars, cards and slideshows will be lost. The original library will be left untouched for further attempts at fixing the problem or in case the rebuilt library is not satisfactory.
OT

Aperture 3.5 projects: Some are missing from Library listing

I use Aperture 3.5.1 with OS 10.9.2, and I have studied the various pages of Aperture manuals, and read quite a few Questions, and I think I understand the difference between projects and albums and between managed and referenced files. But I am puzzled about a few project locations.
To the left of the Aperture display window is a vertical pane about 2 inches wide, with tabs labeled "Library, Info, Adjustments."
In that left-hand pane of the window, under the tab “Library” is a heading “APERETURE LIBRARY-MASTER” and under that is the icon of “Projects”. When I select this, the right hand portion of the full window shows thumbnails representing of all my projects. These are organized by year and for each year, by date. This is the organization that Aperture did when I imported the photos, mostly from cameras. Fine.
In that left hand pan, under the Library tab, further down, there is a heading “PROJECTS”. It shows a list of folders and albums and projects.
I see that in this library there are folders marked 2011 and 2012. In each of those there are folders for the months. In 2012 these include “May”, “Jun UK", "Jun US", “Jul" and others. When I select any of these the associated thumbnails are all visible in the main display window to the right.
In the 2012 > Jun UK folder are 5 projects, with dated names such as "Jun 06, 2012 Chicheley". The word “Chicheley” and “UK" I added, but the rest of the structure 2012 > Jun was created by Aperture when I imported the photos.
However, and here is what puzzles me. In the thumbnail display to the right, of several hundred projects, there are 15 contiguous projects, all from June 2012, that are not listed in the library panel of projects in the Library tab pane at the left.
I can look at the “info” tab and see what the “Project Path” is for any photo. To judge by the badges, All of my photos are managed, not referenced. Indeed, I cannot find any photos in my Aperture library that are referenced.
The projects that show up in the Library listing at the left pane have Project paths that start with a year, for example
2012 > Jun UK > Jun 06, 2012
The projects that do not show up in the Library listing have names such as
Jun UK Chicheley > Jun 05, 2012 Aston
At the top of the Library pane is a search box. It finds Jun 06 but not Jun 05.
I have looked inside the Aperture Library package and I see the organization there for the projects that show up in the library listing. But that is missing the days that are not in the listing — it is missing the projects that show up in the main window but not in the Library list..
Those thumbnailed of the missing projects are of photos that are not referenced, I have used the main menu at the top of the screen to check that.
I can edit all the photos, wherever they may be. No problem. But why do all the projects not show up in the library listing? Where are they?
I have used EasyFind to search for a folder “Jun UK Chicheley”, allowing search in packages, but did not find it. Same problem with any of the other 15 projects that show up in PROJECTS on the right, but not in the Library listing on the left.
I may have imported the missing projects not from the camera but from a travel Aperture library, using the import library option.
Maybe I should select all of these photos and then do a “Consolidate”. I have read about this, in the Manual and in the Suppport questions, but it is not clear whether that will do what I want. I see that Consolidate is something I can do for any of my photos, not just for those that are not shown in the library. So what happens with Consolidate of a photo that is already in the listing of projects? Should I choose “copy” or “move”? If I choose “move” then what happens to whatever collection these came from?
“Show in Project” and “Show in Finder” seem to be unavailable for all of my photos.
I will appreciate help.

What you're seeing when you try to view the original file is the warning that iPhoto had broken the file path/link to the orignal file. Try this: make a temporary, backup copy of your library if you don't already have one (Control-click on the library and select Duplicate from the contextual menu) and apply the two fixes below in order as needed:
Fix #1
Launch iPhoto with the Command+Option keys held down and rebuild the library.
Since only one option can be run at a time start with Option #1, followed by #3 and then #4 as needed.
Fix #2
Using iPhoto Library Manager to Rebuild Your iPhoto Library
Download iPhoto Library Manager and launch.
Click on the Add Library button, navigate to your Home/Pictures folder and select your iPhoto Library folder.
Now that the library is listed in the left hand pane of iPLM, click on your library and go to the File ➙ Rebuild Library menu option
In the next window name the new library and select the location you want it to be placed.
Click on the Create button.
Note: This creates a new library based on the LIbraryData.xml file in the library and will recover Events, Albums, keywords, titles and comments but not books, calendars or slideshows. The original library will be left untouched for further attempts at fixing the problem or in case the rebuilt library is not satisfactory.
OT

Print Preview is missing from Firefox 6 on Mac OSX Lion in both File Menu and Print Dialog Box

The question says it all really. Print Preview option is missing from both the File menu and from the Print dialog box when you select Print. I use Print Preview a lot to avoid wasting paper.
A relevant issue might be that the Mac OSX app Preview is currently having trouble with various printers including my Xerox and so, temporarily, the default application for all Preview items is now Adobe Reader until Apple get their act together. Perhaps this is affecting things?
Thanks for any help

It's moved to the PDF dropdown, "Open PDF in Preview"

Preview Icons Missing after Drag and Drop from Cumulous/Mediadex

When using Cumulous to drag images from the catalogue to a folder, the image icon reverts to the generic .eps. or tiff or jpg.
Let me add this this is inconsistent. Some images from the folder retain their icon identity, while others don't. Further, sometimes the preview image will be there, other times the generic, for the same image, if I darg and drop it a few times...
If copying directly from the original image location folder, the image preview icon is there.
What is going on? I have rebuilt permissions. Latest OSX, G4 1gz, 1gb ram

Hi, Lance.
Well, if my theory is incorrect, then I suggest you discuss this with the folks at Canto or Quark. I use neither product: I was trying to suggest a theory as your question had gone unanswered for some time, and a related question comes up here from time to time re: icon previews and Finder. You may want to be sure you have the latest updates/patches for Cumulus and Quark.
Both Canto and Quark have their own forums, ala Apple Discussions, so you may want to search them or post your question on such (links in this paragraph are to their forums).
Canto also has a support form permitting you to submit questions to them: it requires your Cumulus serial number.
About the only other thing I can suggest is the following, though I'd recommend trying those company-specific forums first. You've not stated the specific version of Mac OS X you are using on the affected Mac ("latest OSX" implies 10.4.4 but knowing the specific version helps). If you also installed QuickTime 7.0.4, that may be an issue. Here's why:
Sometimes third-party A/V apps that depend on QuickTime (QT) support can become problematic with new versions of QT, at least until the developer has time to make changes to their app corresponding to the changes in the latest version of QT. For situations like that, Apple has been publishing QT Reinstallers that will remove the latest version of QT and reinstall a previous, stable version, such as the "QuickTime 7.0.1 Reinstaller for QuickTime 7.0.4."
Note that the existence of a Reinstaller corresponding to the current version of QT does not imply the current version has bugs. Rather it is a safety net in case some third-party A/V app has issues with the current version of QT.
I looked into the Canto documentation a bit and this indicates it does use QuickTime.
That's about all I can suggest. Perhaps someone else with an identical configuration may have more to add.
Good luck!
Dr. Smoke
Author: Troubleshooting Mac® OS X

Reinserting Preview/Images missing from Library and Project

Similar Messages

Maybe you are looking for