Reinstall again after firmware opdate - N96

If I make a backup of N96, doing a firmware update, how much will be restored by creating a restore?
Lost everything on the phone both internal memory and the 16 Gb extra space and must installe everything again , or is there programs who still will work on my phone intern or extern memory ?

The N96 has UDP (User Data Protection). If UDO works as intended you won't need to restore anything as it will all still be on the phone.
The backup is an insurance policy, just in case UDP doesn't work. You will get a list of boxes to tick to select what you wish to backup. Selecting everything especially the mass storage will seriously lengthen the time it takes to back up. I generally just backup just data as I prefer to reinstall applications anyway.
Also, note that the standard pcsuite will not backup licences for movies and music. You have to use OVI suite if you want these backed up.
However all this is academic if UDP works as intended.

Similar Messages

I signed up with the wrong email so i can't verify and continue, so i tried to uninstall and reinstall again but after open it still ask me to verify the wrong email. what should i do?

i signed up with the wrong email so i can't verify and continue, so i tried to uninstall and reinstall again but after open it still ask me to verify the wrong email. what should i do?

I haven’t been in this situation, but can’t you just change your account settings and use a different e-mail or maybe add another secondary e-mail to use for verification?

Can't open Email Settings after firmware updated a...

Hi,
I've upgrated my E71 with new 3.00 firmware yesterday and then restored phone memory from saved backup (yes, restoring is still a great pain for Nokia phones owners - you know, not all the software installed restores and so on, but that's another question).
Before this upgrade I had MfE and Nokia Email installed and one IMAP mailbox was set up in standard Messaging application. After restoring from backup Nokia Email was missing (backup problems I mentioned above) but I've reinstalled it successfully. MfE and Messaging mailbox also worked okay.
But today suddenly I discovered that when I try to open Settings / Email menu item at Messaging app, this app crashes silently. Strange, but when I'm accessing Email Settings menu item being at mailbox tab, I can see this mailbox settings. but when I try to enter global email settings for all mailboxes from the app main menu, application crashes.
I tried to add another mailbox using Settings Wizard - and it worked, additional mailbox appeared in Messaging app. But all the same with it - no access to global Settings / Email menu but works okay when I open Email Settings directly from mailbox tab.
The thing is that I need to remove mailboxes from Messaging App and it can be done through this unreachable global Settings / Email menu only.
Another detail - when I change storage from phone memory to memory card in Settings / Other menu, my mailboxes disappear and the Settings / Email menu becomes accessible. And when I change storage back to phone memory, my two mailboxes are back again (and functional, as before), but when I try to open Settings / Email menu app crashes.
Please advise, because I really have no idea what to do. I assume that there must be a way to remove mailboxes manually, but what is it?
Regards, Yuriy.

Well, the problem gone after I deleted MfE profile (I don't need it right now). This Settings menu is accessible again. Anyway, it was very strange and I can't predict if I will face it again after I add another MfE profile.

Have to reinstall Flash after every reboot.

Windows 7 - IE9 - Flash version 11.0.1.152 - Plugins and OS up to date - ESET Smart Securty 4
I get prompted to install new version of Flash after a reboot, so it happens at least once a day.
I install Flash and it installs just fine and works until the PC boots up again.
I tried some of the following:
- Use Adobe Flash Uninstall program before installing
- Using standalone install program
- Checked ActiveX Filter and it was off...turning it on causes
   this same behavior, but the problem I have has nothing to do with the filter
Not sure when this started, but the user didn't have this problem until recently.
I am using ESET Smart Security 4. On all our systems, and his PC is the only
one that is having a problem. Need some pretty hard evidence before I bother
with uninstalling ESET just to see if that would help.
The part that is really strange...if I go to manage add-on's while it is working,
I see the Flash player there and Adobe's name there and that it is enabled.
After I reboot and go into the add-on manager, Flash is still there and still
enabled, but it now says "Unknown" instead of "Adobe" and is no longer
listed near the other Adobe programs. But then, when I reinstall it, that gets
"fixed" and now says Adobe again. So it almost seems like an IE9 problem
and possibly a corruption problem. No known problems with the PC. I suppose
that reloading the PC from scratch would fix the problem...at least I hope it would,
but I'm also not ready to do major surgery if there is an easier fix.

sorry no hablo ingless
Date: Fri, 14 Oct 2011 22:39:15 -0600
From: [email protected]
To: [email protected]
Subject: Have to reinstall Flash after every reboot.
    Re: Have to reinstall Flash after every reboot.
    created by ʇɐb ɹəuəllıʍ in Using Flash Player - View the full discussion
I also downloaded that Nirsoft tool, and on my (64-bit) system I also only see the ocx and exe registered. But everything works well on my system. So I currently have no other ideas. Hopefully someone from the Adobe team will have a look at this topic.
     Replies to this message go to everyone subscribed to this thread, not directly to the person who posted the message. To post a reply, either reply to this email or visit the message page: http://forums.adobe.com/message/3972457#3972457
     To unsubscribe from this thread, please visit the message page at http://forums.adobe.com/message/3972457#3972457. In the Actions box on the right, click the Stop Email Notifications link.
     Start a new discussion in Using Flash Player by email or at Adobe Forums
For more information about maintaining your forum email notifications please go to http://forums.adobe.com/message/2936746#2936746.

Printer connected to Airport Express USB port won't come online after firmware 7.6 upgrade. I've tried backing up to 7.5.2, but it still shows offline. It is a Canon iP4600 printer and I'm running OS 10.6.8. I've powered everything down and still no go.

Printer connected to Airport Express USB port won't come online after firmware 7.6 upgrade. I've tried backing up to 7.5.2, but it still shows offline. It is a Canon iP4600 printer and I'm running OS 10.6.8. I've powered everything down and still no go. I've connected the printer directly to my MacBook's USB port and it works fine. Any suggestions?

I have an iP4500, which I assume is quite similar to your model.
I had to reset the printing system to get things printing again. Only takes a few minutes and no problems at all since I did it a week ago or so.
Plug the printer into the USB port on the Express and restart the printer.
Open System Preferences (gear icon on the dock) and then open Print and Fax
Right-Click in the printer area on the left and select Reset Printing System
Then click the + (plus) button at the bottom of the printer list to install the printer again.

HT2292 I am using win vista and have installed itunes for my ipod shuffle four years back. now I have purchased iphone 4, and trying to reinstall itunes after uninstalling my earlier itunes i always get a message that error in installation. kindly help

I am using win vista and have installed itunes for my ipod shuffle four years back. now I have purchased iphone 4, and trying to reinstall itunes after uninstalling my earlier itunes i always get a message that error in installation. kindly help

You might find this article helpful: http://support.apple.com/kb/TS3694
It has the error range of 3000's which states
Errors 3000-3999 (3002, 3004, 3013, 3014, 3018, 3164, 3194, and so on): Error codes in the 3000 range generally mean that iTunes cannot contact the gs.apple.com server on ports 80 or 443. This may be because out-of-date or incorrectly configured security or firewall software is interfering, an old version of iTunes is installed, an entry in your hosts file redirecting requests to gs.apple.com (see error 1004 above), or because of your Internet proxy settings. If you are using a proxy, try without using one or with a known-good network. If that does not resolve the issue, follow iTunes for Windows: Troubleshooting security software issues. Error 3014 may indicate that you need to free up more disk space on the computer before trying to restore again. Error 3194 most likely indicates you do not have the latest version of iTunes installed Update to the latest version of iTunes.

On iOS 8.3 using 'Keynote for iPad' the app freezes repeatedly (since the last update of April 21st) while editing slides. 30 sec. later comes alive again, then freezes again after a few editing actions. Anyone with the same problem?

On iOS 8.3 using 'Keynote for iPad' the app freezes repeatedly (since the last update of April 21st) while editing slides. 30 sec. later comes alive again, then freezes again after a few editing actions. Anyone with the same problem? I tried everything 'app support' tells me except deleting and reinstalling the App because I have a lot of files that I'd lose. Recommendations anyone? [email protected]

On iOS 8.3 using 'Keynote for iPad' the app freezes repeatedly (since the last update of April 21st) while editing slides. 30 sec. later comes alive again, then freezes again after a few editing actions. Anyone with the same problem? I tried everything 'app support' tells me except deleting and reinstalling the App because I have a lot of files that I'd lose. Recommendations anyone? [email protected]

Install Photoshop Elements 11 again after a crash

After having to get windows 8.1 from my PC I want to reinstall PE 11 again.I bought it in april 2013 and rght now I can't find any option to install it again because there is only a 12 in the download options.
All my money wasted???

Yes,
I have found it !! Thanks a lot
Van: Barbara B. [email protected]
Verzonden: woensdag 23 oktober 2013 16:54
Aan: euveltje
Onderwerp: Install Photoshop Elements 11 again after a crash
Re: Install Photoshop Elements 11 again after a crash
created by Barbara <http://forums.adobe.com/people/Barbara+B.> B. in Photoshop Elements - View the full <http://forums.adobe.com/message/5782061#5782061> discussion

TS1398 Hi. My wifi keeps disconnecting. I kkep turning the wifi on and off in settings but will disconnect again after a minute or so. I use an ipad2 and my ios is updated. How to troubleshoot? - kay peralta

Hi. My wifi keeps disconnecting. I keep turning the wifi on and off in settings but will disconnect again after a minute or so. I use an ipad2 and my ios is updated. How to troubleshoot? - kay peralta

Is this happening with one particular network or with all? Make sure iOS is updated on the device.
Try this:
Reboot ipad by pressing and holding both the home and sleep/wake buttons at the same time until the apple logo appears on the screen, then let go. Then try to connect to network.
Go to settings, Toggle airplane mode on/off. Make sure bluetooth is off. Turn on wif (airplane mode off). Try to connect.
Reset Network Settings
Go to settings/general/reset/reset network settings. Then try to connect to network.
If its your home router, then reboot router by unplugging for 5-10min. (do this while you're resetting network settings).
If problem persists, then check for firmware updates on your router.(you check router manufacturer support website for downloads and instructions).

Indesign CS6 crashes and wont startup again after reboot - iMac

Hello
I have a strange issue that has started in the last couple of weeks. If i restart or reboot my iMac my indesign will not open again. It tries to start to open ('loading image' appears and icon bounces in the dock) but always fails and gives an error afterwards each time (i will attach).
What i have done so far is the usual deleting of preferences, replacing default file and rebooting the machine again but nothing works.
The only thing that i can do to get it working again is to reinstall indesign from the disk (design & web premium). All other Creative Suite applications don't need reinstalling and work fine.
Has anyone else had this issue and if so how did they fix it as its bit of a pain having to reinstall indesign after each reboot.

Im having issues adding the error log, here is the first bit of it though.....
Process: Adobe InDesign CS6 [262]
Path: /Applications/Adobe InDesign CS6/Adobe InDesign CS6.app/Contents/MacOS/Adobe InDesign CS6
Identifier: com.adobe.InDesign
Version: 8.0.0.370 (8000)
Code Type:       X86 (Native)
Parent Process: launchd [123]
Date/Time: 2014-09-11 09:05:19.273 +0100
OS Version:      Mac OS X 10.7.5 (11G63b)
Report Version: 9
Interval Since Last Report:          188705 sec
Crashes Since Last Report:           18
Per-App Interval Since Last Report: 186329 sec
Per-App Crashes Since Last Report:   14
Anonymous UUID: A7B9940A-3665-4D31-AF1D-3BFD1BF3E45B
Crashed Thread: 0 Dispatch queue: com.apple.main-thread
Exception Type: EXC_BAD_ACCESS (SIGBUS)
Exception Codes: KERN_PROTECTION_FAILURE at 0x0000000000000006

Recovered from disaster after firmware update 7.4.1

I have spent days trying to get connected to Airport Extreme Base station (two months old) after the last firmware update. I have seen many people with same or similar issues. The usual "doesn't detect wireless device" messages. I finally had some luck running from my clone drive using an older airport utility. At least I could get it to register the base station but only by using an additional ethernet patch cable to my laptop. Then it would allow me to adjust settings. Still things were not right. Connection was not good and I could not use the (802.11n(802.11b/802.11g compatible) settings at all. Sometimes I would get almost there and it would ask for my Network password and then say "connection timed out."
Then I found this post:
http://newtonpoetry.com/2008/08/18/airport-base-station-fix-revert-your-firmware /
Gave it a shot and everything is perfect now.
I reverted to older Airport Utility and older AE Base Station firmware
I downloaded and installed older airport utility 5.3.1, first deleting the old components:
/Applications/Utilities/Airport Utility
/System/Library/CoreServices/AirPort Base Station Agent
/System/Library/LaunchAgents/com.apple.AirPortBaseStationAgent.plist
I had to delete the Agent while booted from another volume since system won't let you delete that. The older Airport utility installer may have replaced the newer one with the old one but I wanted to be sure.
Then I launched the old version of Airport Utility and followed directions, in the above url, to revert to the older firmware 7.3.1. Restarted laptop, opened Airport Utility and voila! Instant recognition. Changed a few settings including the (802.11n(802.11b/802.11g compatible) radio frequency and it all works flawlessly. Range is fantastic again. Very good speed.
I am not suggesting everyone revert to the older (less buggy?) updates but for me there was something very wrong especailly after Firmware 7.4.1. Hope Apple can make these more user friendly soon. I would love to know if anyone, or Apple, can tell me how to fix this issue using the latest updates. I tried every suggestion out there. Hard resets, restarting modem, turning off phones and other "interference", over and over with no luck.
That's my story, so far.
Rob D

Sorry... please disregard my previous question...
I've found out how to downgrade the firmware...
Of course!!! My connection is flying above 6Mbps again Whoa!!! I'm relieved...
For you folks who do want to find out how to downgrade:
1. Reboot the time capsule
2. Connect to it using the airport utility
3. Hold Control/Option key and click File > Check for Updates
4. Select the version you want to downgrade to, click Download
5. When down load completes, click Base Station > Upload Firmware
Select the version that you just downloaded and submit...
Wait about 5 minutes and it will restart... this restart takes little longer than usual... but it will come back.
Good luck all!!!

Lync 2010 Polycom CX600 phones fail to sign-in after firmware update

We're running the latest version of Lync2010 in our environment of approximately 1,500 Polycom CX600 phones across 5 Standard edition sites. After rolling out the latest firmware update 4.0.7577.4444 this weekend about 10% of the phones do not come back
online as the user they were previously signed as.The firmware was approved on a Friday evening and Monday morning we were still experiencing the issue.
The phone is stuck in the following error message:
"Sign-in Error
Cannot sign in. Please verify your sign-in address domain\username, and password and try again."
The phone did update to the latest version of firmware but is stuck in "limbo". Doing a traffic dump on the port it's connected to did not reveal anything as the phone is not attempting to communicate with any servers. Only a power
cycle (unplugging POE LAN port) makes the phone sign back in. Just to clarify, after the power cycle the phone signs back in on its own as it seems that it still stored the user's sign in information.
We connect to the voice network via LLDP and we have Alcatel-Lucent 6250 switches that these phones connect to. We also have the DHCP options for the phones to find our voice network for areas that do not have LLDP capable switches.
Just to recap, about 150 phones experienced this issue across all sites and we cannot narrow it down to anything specific about the environment. Performing a power cycle fixes this issue but it is extremely annoying.
Any suggestions?

Check the similar thread at
http://social.technet.microsoft.com/Forums/en-US/771ab6d9-908f-4545-b94f-ef51ab0cca60/polycom-cx600-cant-sign-in-after-firmware-upgrade?forum=lyncvoice
Try to move back to the previous version or you may need to reset each phone manually.
Lisa Zheng
TechNet Community Support

Help! Help! Help! Can not reinstal vista after replacing a new hard drive

Can not reinstal vista after replacing a new hard drive (1TB WD 10EZEX) in HP Pavilion a6658f Desktop PC with recovery disc.
I saw in the screen:
"Windows setup could not configure windows to run on this computer's hardware"
Product:
HP Pavilion a6658f Desktop PC
OS: pre-installed window vista with sp1
Product number: FK575AA
Bought in Canada
Thank you.

Thank you so much Lisa27,
win vista installed to new WD 1tb hard drive. How?
1. use http://support.wd.com/product/download.asp?groupid=606&lang=en
>Data Lifeguard for Windows , write zero and to test the new hard drive,
2. use Acronics true image 2013 to do partition on the new HD, and then to clone from the old HD to new HD.
3. down load Intel Rapid Storage Tech to fix the Issues with Windows Vista* and Intel® RAID (without it, Window mail can not be opened.
Thank you very much for all your guys again and the support form WD support team.

Reinstalling Lightroom after harddisk failure and new harddisk

Hi I have faced a harddisk crash and got a new 1 terabyte harddisk.
Now I am installing the programs again but when I put the disk into the slot it does accept it.
What can I do?
Pls help
rgds
Niels

Hi Adobe Photoshop Lightroom 5 and Elements 12
Den 30/11/2014 kl. 20.25 skrev John Waller <[email protected]>:
Reinstalling Lightroom after harddisk failure and new harddisk
created by John Waller <https://forums.adobe.com/people/John+Waller> in Adobe Creative Cloud - View the full discussion <https://forums.adobe.com/message/6973190#6973190>
when I put the disk into the slot it does accept it.
Which Adobe software are you trying to re-install?
If the reply above answers your question, please take a moment to mark this answer as correct by visiting: https://forums.adobe.com/message/6973190#6973190 and clicking ‘Correct’ below the answer
Replies to this message go to everyone subscribed to this thread, not directly to the person who posted the message. To post a reply, either reply to this email or visit the message page:
Please note that the Adobe Forums do not accept email attachments. If you want to embed an image in your message please visit the thread in the forum and click the camera icon: https://forums.adobe.com/message/6973190#6973190
To unsubscribe from this thread, please visit the message page at , click "Following" at the top right, & "Stop Following"
Start a new discussion in Adobe Creative Cloud by email <mailto:[email protected].com> or at Adobe Community <https://forums.adobe.com/choose-container.jspa?contentType=1&containerType=14&container=46 70>
For more information about maintaining your forum email notifications please go to https://forums.adobe.com/thread/1516624 <https://forums.adobe.com/thread/1516624>.
Venlige hilsener
Niels Brandt

After firmware update to V2.0.03, the web UI dos not look right. (WRT160 V2)

Hi
After firmware update from V2.0.01 to V2.0.03, the web UI dos not look right.
I can't see menus, just version number and the basic setup page.
Router Linksys WRT160 v2.
Allan

Hi
Thanks for the reply.
I't works ok now.
Thanks again.
Allan

Reinstall again after firmware opdate - N96

Similar Messages

Maybe you are looking for