Reinstall from 2009 version on Mac OS X Mountain Lion
Reinstalling Logic Pro 9 version of 2009 on Mac OS X Mountain Lion 10.8.3 stop the installation before installing Jam Pack Content 2. Logic Pro installation fail to install. What I need to do to make complete installation successfull of Logic?
Thank You
I just found the anwer to my own issue. The installation failed on Jam Pack Content 3 disk. To finish the installation I need to go to the Logic Pro Main menu under the item Download supplemental content
Similar Messages
-
Remove nosuid option from nfs mounts on Mac Os X mountain lion
Hi there
I need to use sticky bit within an NFS export, and to use noowners mount option when I access NFS export from my mac.
So I have mounted the NFS export on my mac and performed a "chmod -R 7777 . " on the root directory of NFS export
I have modified the /etc/nfs.conf file as follows below:
Alessandros-MacBook-Pro:~ alessandro$ cat /etc/nfs.conf
# nfs.conf: the NFS configuration file
nfs.client.mount.options=nodev,noowners
when i mount the export using finder I can see the entry of my NFS export mounted with "noowners" option but also with "nosuid"
that prevents my export to follow sticky bit behaviour.
Alessandros-MacBook-Pro:~ root# mount
/dev/disk0s2 on / (hfs, local, journaled)
devfs on /dev (devfs, local, nobrowse)
/dev/disk1s2 on /Volumes/unit (hfs, local, journaled)
map -hosts on /net (autofs, nosuid, automounted, nobrowse)
map auto_home on /home (autofs, automounted, nobrowse)
10.100.10.162:/test_nfs on /Volumes/test_nfs (nfs, nodev, nosuid, noowners, mounted by alessandro)
What could I do in order to do this action by finder preventing the nosuid option to be applied?
Best regards
AlexI just found the anwer to my own issue. The installation failed on Jam Pack Content 3 disk. To finish the installation I need to go to the Logic Pro Main menu under the item Download supplemental content
-
When upgrading from osx 10.7.4 to osx mountain lion I get the following Alert! This update requires OS X version 10.8.
Sounds like you downloaded the 10.8.1 update instead of the Mountain Lion installer from the Mac App Store.
You have to purchase Mountain Lion from the App Store to get to 10.8 -
I would like to import the .abcdp files from my old, restored HD (was running mountain lion when the mac crashed) to the addressbook of my new mac (10.9.5).
Please advise.I don't have access to one.
I don't understand why the new address book is not backwards compatible with the data from former OS X versions.
In 10.8. preview was still able to read the files although it was already impossible to import them into the address book. But Why? -
I can no longer print from windows pc via mac/time machine in lion. Does anyone know why or how to fix? I have print sharing ticked and printer is HP laser jest 2550.
I finally found a log file... unfortunately, it doesn't help me figure out what's wrong... but maybe it will mean something to one of you?
I [10/Dec/2007:20:23:35 -0500] [Job 11] Adding start banner page "none".
I [10/Dec/2007:20:23:35 -0500] [Job 11] Adding job file of type application/postscript.
I [10/Dec/2007:20:23:35 -0500] [Job 11] Adding end banner page "none".
I [10/Dec/2007:20:23:35 -0500] [Job 11] Queued on "SUTTER_WG" by "kristophermiller".
I [10/Dec/2007:20:23:35 -0500] [Job 11] Started filter /usr/libexec/cups/filter/pstoappleps (PID 335)
I [10/Dec/2007:20:23:35 -0500] [Job 11] Started filter /usr/libexec/cups/filter/pstocupsraster (PID 336)
I [10/Dec/2007:20:23:35 -0500] [Job 11] Started filter /usr/libexec/cups/filter/rastertoepson (PID 338)
I [10/Dec/2007:20:23:35 -0500] [Job 11] Started backend /usr/libexec/cups/backend/smb (PID 339)
E [10/Dec/2007:20:23:36 -0500] [Job 11] cgpdftoraster unsupported colorSpace: colorSpace = -1, colorOrder =1, bitsPerColor = 1
E [10/Dec/2007:20:23:36 -0500] [Job 11] cgpdftoraster: got an error from cupsRasterInterpretPPD
E [10/Dec/2007:20:23:36 -0500] [Job 11] No pages found!
E [10/Dec/2007:20:23:36 -0500] PID 338 (/usr/libexec/cups/filter/rastertoepson) stopped with status 1!
I [10/Dec/2007:20:23:36 -0500] Hint: Try setting the LogLevel to "debug" to find out more.
E [10/Dec/2007:20:23:36 -0500] [Job 11] Job stopped due to filter errors. -
Update from Mac OS X 10.5.8 to Mac OS x Mountain Lion
Hello, can you tell me what are the steps to have Mac OS X Mountain Lion ?
Do I have to download all the versions between both ??? what does it cost ?
Thanks for answers !!!Click here and read all three steps to the bottom.
(72503) -
All my Photos disappeared after I saved a photo to Iphoto from an email from my wife. I am running Mountain lion on Mac book pro 2012, help. What did I do wrong?
Apply the two fixes below in order as needed:
Fix #1
Launch iPhoto with the Command+Option keys held down and rebuild the library.
Since only one option can be run at a time start with Option #3, followed by #4 and then #1 as needed.
Fix #2
Using iPhoto Library Manager to Rebuild Your iPhoto Library
1 - download iPhoto Library Manager and launch.
2 - click on the Add Library button, navigate to your Home/Pictures folder and select your iPhoto Library folder.
3 - Now that the library is listed in the left hand pane of iPLM, click on your library and go to the File ➙ Rebuild Library menu option.
4 - In the next window name the new library and select the location you want it to be placed.
5 - Click on the Create button.
Note: This creates a new library based on the LIbraryData.xml file in the library and will recover Events, Albums, keywords, titles and comments. However, books, calendars, cards and slideshows will be lost. The original library will be left untouched for further attempts at fixing the problem or in case the rebuilt library is not satisfactory.
OT -
How to re-install iLife 2011 in Mac OS X Mountain Lion unit after you formatted and reinstall OS X?
How to re-install iLife 2011 in Mac OS X Mountain Lion unit after you formatted and reinstall OS X?
Sign into the App Store with your Apple ID, click on the Purchases icon in the toolbar, locate the three iLife apps and redownload them.
-
Will reinstalling Mac OS X Mountain Lion wipe my Hard Drive?
I want to reinstall Mac OS X Mountain Lion on my MacBook Pro 2012. I have many apps and files on my Mac's hard drive and I was wondering what would happen to them if I were to reinstall Mountain Lion.
That's cool, but just remember, that depending on a computer and it's configuration, application load times etc all run a little differently. (SSD drives are much faster at loading applications than traditional HDDs. Also, if you hard drive is quite full, it can run slower.)
Before I would proceed with a full reinstall the OS, I would run Disk Utility in the Applications/Utilities folder and repair disk permissions.
To do so, I would reboot my computer, make sure no applications are running, run DU, reboot again and then see if the performance has improved. -
I own osx mountain lion with messages.When i go to create a new message i dont undrestand why you can send it to their email.also is it possible to send a message from my mac to another mac that has mountain lion.
MacBook, OS X Mountain Lion, help meThe recipient needs to have Messages set up with the e-mail. Check the image below:
Hope it heps.
JP -
For my Mac mini with Mountain Lion OS X 10.8.1, what is a good greeting card software download with lots of templates and graphics?
Hi simon2010,
as far as I can see, I have resolved it...
Just so I didn't write over my functioning disk in the Mac mini, I took it out and put a spare one in. (Would have saved me going back to the Apple store to get it re-imaged if it did fail.)
I created a Mountain Lion installer on an 8GB USB stick, and first installed 10.8.4 (the latest at the current time) on my MacBook Pro... it worked fine, so I knew the installer stick had no problems at all (that's one thing to rule out of the list of potential causes).
With my spare hard disk in the Mac mini, I then went to try to install 10.8.4 on it, with my 16GB non-Apple RAM in it. It failed as usual in the way I expressed originally.
I then just swapped my 16GB RAM for the original Apple 4GB RAM (2x2GB sticks) which I put back in the machine, and I tried re-installing. No problem whatsoever - it installed perfectly.
It's the RAM! Even though my RAM works perfectly once installed, the Apple OS installer refuses to proceed if Apple RAM is not in. I put my 16GB RAM back in after installing the OS and all is fine.
I'm quite surprised Apple has done this.
Have you changed the RAM? Let me know if it's the same problem or you have some differences.
I assume it will install fine if I put the orignal HD back in, again if I have the original Apple RAM in of course.
PS. Also to note, the point where it failed in the installer with my 16GB RAM in, with the original Apple RAM in it took an incredibly long time towards the end of the bar moving across the screen; it says "5 minutes remaining" for at least 15, maybe 20 minutes, but gets past it eventually, then does a reboot to continue its install. -
Havinig a lot of problems with my MacBook since I've upgraded to the Mac OS X Mountain Lion program. Can someone tell me if it's possible to reset my computer back to factory settings?
Follow these instructions step by step to prepare a Mac for sale:
Step One - Back up your data:
A. If you have any Virtual PCs shut them down. They cannot be in their "fast saved" state. They must be shut down from inside Windows.
B. Clone to an external drive using using Carbon Copy Cloner.
1. Open Carbon Copy Cloner.
2. Select the Source volume from the Select a source drop down menu on the left side.
3. Select the Destination volume from the Select a destination drop down menu on the right
side.
4. Click on the Clone button. If you are prompted about creating a clone of the Recovery HD be
sure to opt for that.
Destination means a freshly erased external backup drive. Source means the internal
startup drive.
Step Two - Prepare the machine for the new buyer:
1. De-authorize the computer in iTunes! De-authorize both iTunes and Audible accounts.
2, Remove any Open Firmware passwords or Firmware passwords.
3. Turn the brightness full up and volume nearly so.
4. Turn off File Vault, if enabled.
5. Disable iCloud, if enabled: See.What to do with iCloud before selling your computer
Step Three - Install a fresh OS:
A. Snow Leopard and earlier versions of OS X
1. Insert the original OS X install CD/DVD that came with your computer.
2. Restart the computer while holding down the C key to boot from the CD/DVD.
3. Select Disk Utility from the Utilities menu; repartition and reformat the internal hard drive.
Optionally, click on the Security button and set the Zero Data option to one-pass.
4. Install OS X.
5. Upon completion DO NOT restart the computer.
6. Shutdown the computer.
B. Lion and Mountain Lion (if pre-installed on the computer at purchase*)
Note: You will need an active Internet connection. I suggest using Ethernet if possible because
it is three times faster than wireless.
1. Restart the computer while holding down the COMMAND and R keys until the Mac OS X
Utilities window appears.
2. Select Disk Utility from the Mac OS X Utilities window and click on the Continue button.
3. After DU loads select your startup volume (usually Macintosh HD) from the left side list. Click
on the Erase tab in the DU main window.
4. Set the format type to Mac OS Extended (Journaled.) Optionally, click on the Security button
and set the Zero Data option to one-pass.
5. Click on the Erase button and wait until the process has completed.
6. Quit DU and return to the Mac OS X Utilities window.
7. Select Reinstall Lion/Mountain Lion and click on the Install button.
8. Upon completion shutdown the computer.
*If your computer came with Lion or Mountain Lion pre-installed then you are entitled to transfer your license once. If you purchased Lion or Mountain Lion from the App Store then you cannot transfer your license to another party. In the case of the latter you should install the original version of OS X that came with your computer. You need to repartition the hard drive as well as reformat it; this will assure that the Recovery HD partition is removed. See Step Three above. You may verify these requirements by reviewing your OS X Software License. -
Upgrade from OS X 10.6.8 to Mountain Lion
Hi, my MacBook has the following specs: 2 GHx Intel Core 2 Duo, with 2 GB 667 MHz DDR2 SDRAM, with about 200 GB of available space on my hard drive, running Snow Leopard 10.6.8. I tried to purchase and download Mountain Lion and got a message stating "We could not complete your purchase, OSX Mountain Lion is not compatible with this computer". On another discussion thread, I saw a comment where you can upgrade directly from Snow Leopard to Mountain Lion - did I misunderstand this?? Does anyone have any ideas on why I can't upgrade? Any & all help would be greatly appreciated!
Hi, You understood perfectly, but Apple seems a bit secretive as to what is required, & many Macs can't run ML/10.8, but may run Lion/10.7.
(For my money, OSX went really down hill fast after 10.6.8)
Snow Leopard/10.6.x Requirements...
Lion/101.7 System requirements
• x86-64 processor (Macs with an Intel Core 2 Duo, Intel Core i3, Intel Core i5, Intel Core i7, or Xeon processor.)
• At least 2GB of memory, (I say 4GB)
• Latest version of Mac OS X Snow Leopard (10.6.8), with the Mac App Store installed
• At least 4GB of disk space for downloading, (I say 40GB at least)
Like Snow Leopard, Lion does not support PowerPC-based Macs (e.g., Power Macs, PowerBooks, iBooks, iMacs (G3-G5), eMacs).
Lion also does not support 32-bit Intel Core Duo or Core Solo based Macs. Rosetta is no longer available in Lion, which means Lion no longer supports PowerPC applications.
But you have to call Apple to get Lion/10.7 if it indeed will run it.
Macs that will support OS X 10.8 Mountain Lion
As usual, the newer the Mac the better:
• MacBook Pro – 13″ from mid 2009 or later, 15″ from late 2007 and newer, 17″ from late 2007 and newer
• MacBook Air – late 2008 and newer
• iMac – models from mid 2007 and newer
• MacBook – 13″ aluminum from 2008, 13″ from 2009 and newer
• Mac Mini – early 2009 and newer
• Mac Pro – early 2008 models and newer
• XServe – early 2009 models and newer
Macs that are NOT expected to support OS X Mountain Lion
Older Macs and those with weaker GPU’s will likely be left behind:
• Anything with an Intel GMA 950 or x3100 integrated graphics card
• Anything with an ATI Radeon X1600
• MacBook models released prior to 2008
• Mac Mini released prior to 2007
• iMac models released prior to 2007
• Original MacBook Air
This list of compatible and incompatible Macs and system requirements are based off of the first OS X Mountain Lion Developer Preview and may be subject to change, we will update when we learn more about the specifics. OS X Mountain Lion will be released this summer but presumably long before that we will know precise system requirements and what Macs are and are not supported by the new version of OS X. Stay tuned.
http://osxdaily.com/2012/02/16/os-x-10-8-mountain-lion-system-requirements/
http://en.wikipedia.org/wiki/OS_X_Mountain_Lion
Your Mac must be one of the following models, according to the Cupertino giant: iMac (Mid 2007 or newer); MacBook (Late 2008 Aluminum, or Early 2009 or newer); MacBook Pro (Mid/Late 2007 or newer); MacBook Air (Late 2008 or newer); Mac mini (Early 2009 or newer); Mac Pro (Early 2008 or newer).
At the Apple Icon at top left>About this Mac.
Then click on More Info>Hardware and report this upto but not including the Serial#...
Hardware Overview:
Model Name: iMac
Model Identifier: iMac7,1
Processor Name: Intel Core 2 Duo
Processor Speed: 2.4 GHz
Number Of Processors: 1
Total Number Of Cores: 2
L2 Cache: 4 MB
Memory: 6 GB
Bus Speed: 800 MHz
Boot ROM Version: IM71.007A.B03
SMC Version (system): 1.21f4 -
Mac OS X Mountain Lion Boot Drive Issues
Dear Apple Users,
This is my first post here on the Apple Support Communities, so kindly forgive me if I'm repeating a previously asked question.
I'd like to create a Mac OS X Mountain Lion USB Boot Drive and of course I already have it installed on my MBP.
My question is whether I need to buy the App from the App Store if I already have it installed on my MBP[in order to create the USB Boot Drive, I need .dmg ]? On App Store, price tag is still appearing, that's why I'm asking.
Thanks in advance for all your helpIf you purchased OS X Mountain Lion to upgrade your computer, open App Store > Purchases, and download OS X Mountain Lion. When the download finishes, use Lion Diskmaker to create a bootable Mountain Lion drive > http://liondiskmaker.com
If your Mac came with OS X Mountain Lion, you may not be able to make a bootable Mountain Lion drive until Apple launches a OS X update. That's because your Mac may be using a special OS X version that you can't get from the App Store, so you can only download it starting in OS X Recovery, and you won't be able to create an external drive with Mountain Lion -
Host-based OpenLDAP Authentication On Mac OS X Mountain Lion
Hello All,
I'm sorry if this is the wrong group to post such a question, or if this has been already answered.
I have openldap (slapd version 2.4.31-1+nmu2ubuntu8) running on Ubuntu Server 14.04. The 'hostObject' objectClass is added in the OpenLDAP directory. The 'host' attribute is added under all ldap users, which allows users to access just those particular hosts. Apple schema has been added as well.
I have a ubuntu client that authenticates users against the ldap server. The ubuntu client is configured to perform host-based authentication via pam modules. Only users that have access to the Ubuntu client can login, and others are denied access. I also have a Mac OS X Mountain Lion (10.8.5) client that authenticates users against the same openldap server. All network users can login through the login window. I would like to restrict access to the Mountain Lion client based on hosts, as I've it on the Ubuntu client.
I tried to search for documentation on this, but didn't find any good one. Most of the documentation suggest that network user access be controlled on the Mountain Lion client. I'd really like to have that control on ldap server and not on client. Also, restricting network user access using 'Users & Groups' settings in System Preferences fails. All ldap users are blocked from login.
I have successfully tested host-based authentication on a Ubuntu Server 10.04 client that is connected to the same ldap server. So, I know host based authentication works. I would really appreciate if anyone could shed some light on this, or point me to a document that talks about host-based authentication on Mac OS X Mountain Lion client.
Thanks,
AmitI just found the anwer to my own issue. The installation failed on Jam Pack Content 3 disk. To finish the installation I need to go to the Logic Pro Main menu under the item Download supplemental content
Maybe you are looking for
-
I'm not sure why it deleted everything. I had rearranged and cleaned up my desktop earlier, but I know for a fact I didn't delete anything. Now, I go onto my Itunes and only two songs I bought off Itunes are there. I had more that I bought, but even
-
Development and marketing of SAP EP solutions - any licenses required?
Hi Not sure which forum to post this in, so - maybe Coffee Corner is a good start My question is about the licensing required to development and marketing small add-ons / extensions for SAP Enterprise Portal. Is it possible for the individual develop
-
I am just starting out using a Cisco ASA 5505 device, but have to say that I have encountered some peculiarities with the software. To start, when I try to connect to the device from my Microsoft Windows XP service pack 3 machine via the Cisco ASDM L
-
Unable to send or receive text messages
I just activated my Droid Razr and I'm unable to send or receive text messages. Sending and receiving phone calls and emails works fine. Any ideas?
-
I AM HAVING TROUBLE RESTORING MY REPLACEMENT APPLE 2 I-PAD, COULD YOU WALK ME THRU IT/
can u walk me thru to access my replacement i pad2