Reinstall grub for dual boot...

Hi all,
I've got Archlinux64 & WinVista64 installed as dual boot... but I'm going to have to re-install Vista again from fresh, so once it's all on again Vista will start to boot auto* 'cos it'll over written grub.
How do I install grub again... do I insert the Archlinux64 disc & ignore all the settings & just install grub?!
many TIA

if you manually mount your root partition on /mnt after booting from the arch install disc, going to setup and then choose to install grub should work I guess (not tested though )

Similar Messages

How to setup GRUB for dual booting OS X and arch?

So I am reading the wiki, and there is a command I need to run, but for whatever reason I'm getting an error. The command is,
grub-mkstandalone -o bootx64.efi -d usr/lib/grub/x86_64-efi -O x86_64-efi -C xz boot/grub/grub.cfg
and error I'm getting is,
grub-mkstandalone: -C: (PROGRAM ERROR) Option should have been recognized!?
Google searching the error yielded 2 results
Last edited by ipatch (2014-05-22 18:35:32)

Looks like the -C flag has been deprecated:
claire ~ % grub-mkstandalone --help
Usage: grub-mkstandalone [OPTION...] [OPTION] SOURCE...
Generate a standalone image (containing all modules) in the selected format
--compress[=no,xz,gz,lzo] compress GRUB files [optional]
-d, --directory=DIR use images and modules under DIR
[default=/usr/lib/grub/<platform>]
--fonts=FONTS install FONTS [default=unicode]
--install-modules=MODULES install only MODULES and their dependencies
[default=all]
-k, --pubkey=FILE embed FILE as public key for signature checking
--locale-directory=DIR use translations under DIR
[default=/usr/share/locale]
--locales=LOCALES install only LOCALES [default=all]
--modules=MODULES pre-load specified modules MODULES
--themes=THEMES install THEMES [default=starfield]
-v, --verbose print verbose messages.
--core-compress=xz|none|auto
choose the compression to use for core image
-o, --output=FILE save output in FILE [required]
-O, --format=FILE generate an image in FORMAT
available formats: i386-coreboot, i386-multiboot,
i386-pc, i386-pc-pxe, i386-pc-eltorito, i386-efi,
i386-ieee1275, i386-qemu, x86_64-efi, i386-xen,
x86_64-xen, mipsel-yeeloong-flash,
mipsel-fuloong2f-flash, mipsel-loongson-elf,
powerpc-ieee1275, sparc64-ieee1275-raw,
sparc64-ieee1275-cdcore, sparc64-ieee1275-aout,
ia64-efi, mips-arc, mipsel-arc,
mipsel-qemu_mips-elf, mips-qemu_mips-flash,
mipsel-qemu_mips-flash, mips-qemu_mips-elf,
arm-uboot, arm-efi, arm64-efi
-?, --help give this help list
--usage give a short usage message
-V, --version print program version
Mandatory or optional arguments to long options are also mandatory or optional
for any corresponding short options.
Graft point syntax (E.g. /boot/grub/grub.cfg=./grub.cfg) is accepted
Report bugs to <[email protected]>.
I couldn't find -C in the man-page either.

Attempted to install windows 7 for dual boot but OSX installation now missing???

I've tried to install Wndows 7 on my macbook air for dual boot but got the kernal error on boot.
I loaded from the CD again and it sucessfully installed win 7 but when I start the macbook air up it only appears to have windows installed?
How can I get my OSX back?

For some odd reason when you use bootcamp to install the second OS bootcamp is defaulted as the primary OS you will need to hold option key to select the apple OS then in the sys preference under startup disk select apple as primary.

How to add another operating system for Dual boot in Windows 7 boot configuration

Hi,
I have dell laptop with excellent configuration. On which i had windows 7 Home premium on C Drive and Windows server 2008 on D Drive.
Now i upgraded my Windows 7 Home Premium 32 bit to Windows 7 Ultimate 64 bit. But after fresh installation of Win 7 Ultimate my dual boot screen has gone and Win 7 is getting start directly.
Now i want to add my Windows server 2008 again for dual boot which is still on D Drive.
Can anyone please tell me how to add windows 2008 boot option in boot configuration to active my dual boot options.
Thanks

1) Using bcdedit.exe /enum
To enable the computer to also boot Windows 7 you again use bcdedit.exe with the following command which will copy the current Windows
Boot Loader details for Windows Server 2008 to Windows 7.
bcdedit.exe /copy
{current} /d "Microsoft Windows 7"
bcdedit.exe will
respond with something like the following.
The
entry was successfully copied to {................................}.
Using
bcdedit.exe /enum to again enumerate through the current entries within the BCD store you'll see the newly added entry.
Before you can use the newly created Windows boot loader configuration, you'll need to change the partition for Windows 7 using
the following two bcdedit.exe commands.
bcdedit.exe /set {.................................} device partition=D:
bcdedit.exe /set {.................................} osdevice partition=D:
If you now reboot the system you should now be able to boot into either Windows Server 2008 or Windows 7.

Help needed for Dual Booting purpose.

If I want to install Windows 8.1 Enterprise and Windows Server 2012 R2 together for dual booting purpose, then which OS should be installed
first to get a successful dual boot configuration.. Please help me regarding this matter..

This one may help.
http://blogs.technet.com/b/blainbar/archive/2012/09/25/step-by-step-4-ways-to-dual-boot-microsoft-windows-8-and-windows-server-2012-with-or-without-windows-7.aspx
Regards, Dave Patrick ....
Microsoft Certified Professional
Microsoft MVP [Windows]
Disclaimer: This posting is provided "AS IS" with no warranties or guarantees , and confers no rights.

How to install Arch for dual-boot with Win 7 (on 2 hard drives)?

Hello,
the TLDR first: how exactly should I proceed when setting up GRUB for 2 hard drives to dual-boot Arch (64 bit)and Win 7 (64 bit)?
Long version: So, I have the following hard drive & partition layout:
On my first hard drive (250 GB big) I have: Win 7 64 bit, all the programs for Windows and of course the EFI partition
My second hard drive is 1 TB big and formatted in NTFS and it only contains data. It has 2 partitions, one is about 750 GB big and used for simple storage.
Sidenote 1: sometimes my disk management (Windows' own gparted) shows either the little disk or the big one as disk 0. Don't know what exactly this means, but I have never ever experienced any problems whatsoever during use.
Sidenote 2: the UEFI motherboard (ASRock H67M) cannot boot into Legacy mode.
I want to install Arch on a ~200 GB partition on the second hard drive (the one with 1 TB). (click here if you want to see a screenshot) I am posting this because I am confused with how exactly I should deal with the whole "2 hdds & UEFI" thing.
So how exactly should I proceed when setting up GRUB for this setup?
For partitioning I suppose I would have to use fdisk or cgdisk. I used cgdisk before and found it to be straightforward. Then, because I have experienced my fair share of problems with rEFInd, I'd like to use GRUB.
Last edited by jones (2013-06-29 14:36:56)

First thing you should do is become familiar with your motherboard.
http://www.asrock.com/mb/manual.asp?Model=H67M
This will probably help you out in understanding the sidenote 1 thingie (hdd's on sata3 and/or sata2 connectors)
As on sidenote 2, according to the manual it seems to be possible to boot legacy mode, see Storage Configuration.

Best protocol for dual booting on a hardware RAID 0 array?

Hi folks. I would like to dual boot Windows 7 and Arch. I'll append the specs. I have a Terrabyte to split evenly between the two drives - each is 500G. Unless someone can come up with a reason and convince me otherwise, I want to do away with the RAID array. There's no redundancy anyhow and the speed I would lose breaking the array is negligible, therefore irrelevant.
My issue is that I have a RAID 0 hardware array with Intel Rapid Storage Technology as the controller. The computer did NOT come with a Windows disk, but rather a recovery partition. It is my understanding that if I break the array, I will lose the recovery partition and will not be able to reinstall Windows - which I need. IF....the recovery partition can be unphased by breaking the array and I can use it to reinstall Windows, I would prefer that since I may need to recover Windows in the future. It's not a deal breaker if I can't keep the recovery partition, since I have the Windows key.
Is this the ideal protocol?:
1. Backup - I plan on using Alienware Respawn or Clonezilla to backup to a CD and will also backup to an external drive.
2. Break array, but do not alter BIOS to AHCI - leave as RAID.
3. Restore Windows on one drive.
4. Install Arch on second drive.
5. Configure GRUB.
6. Smoke stogie or alternatively weep because I turned my computer into a brick.
At which stage does the partitioning come in? Before or after breaking the array? Is there a better method, than the one I listed. I have spent days scouring Google and the forums and while it's easy to find info on breaking a hardware RAID, there isn't much on doing this with the recovery partition and Alienware Respawn aspects involved. Any help would be appreciated. Please don't kill me or shred my diameter.
==================================================================================
Specs:
Processor: Intel(R) Core(TM) i7 CPU Q 740 @ 1.73GHz 1.73 Ghz: 8 Intel(R) Core (TM) i7 CPU q740 @ 1.73GHz
Installed Memory: 8.00 GB RAM
64 Bit Operating System
Alienware M17X10
Windows 7 Home Premium
Performance Options: DEP turned on. Virtual Memory: 8180 MB
Architecture: AMD64 Intel64 Family 6 Model 30 Stepping 5, GenuineIntel
Computer: ACPI x64-based PC
Display Adapters: 2 ATI Mobility Radeon HD 5800 Series
DVD/CD-ROOM: HL-DT-ST DVDRWBD CA10N
IDE ATA/ATAPI controllers: Ricoh PCIe Memory Stick Host Controller, Ricoh PCIe SD/MMC Host Controller, and Ricoh PCIe xD-Picture Card Controller
IEEE 1394 Bus host controllers: Ricoh 1394 OHCI Compliant Host Controller
Imaging devices: Integrated Webcam
Mice; 3 HID-Compliant Mouse and Synaptics PS/2 Port Toch Pad
Monitor: Generic PnP Monitor
Sound, video and game controllers: AMD High Definition Audio Device and High Definition Audio Device
Storage Controllers: Intel(R) Mobile Express Chipset SATA RAID Controller

I think the big thing will be backing up. I don't know anything about the two programs you would use, but I know that if I dd copy the disks, I would have to change the size of the partitions to match the size of the new partitions. IE: I have Arch installed on a RAID0 of 32GB each, and if I wanted to break my RAID and install on just one disk, I would have to shrink the size of my dd'ed copy to match the smaller drive.
Otherwise, it looks like you have the right idea, or at least the right direction.

How should I install GRUB to dual-boot 2 distros on two diff hd drves?

Well, I actually have two questions. I'm using the FTP install CD and noticed I don't have the Install Kernel Option after Configure System. Does this mean that the kernel was installed when I did Configure System automatically? Or that it wants me to run make && make modules_install manually? I couldn't quite figure that one out.
Now as for my main question... I pretty much got through the install okay but am a bit paranoid about just saying Install Bootloader. I currently have Gentoo on another hard drive on my computer and don't want to wipe out GRUB on Gentoo.
If this helps, this is my partition scheme:
/dev/hda1 swap (for both Gentoo and Arch)
/dev/hda2 / for Gentoo
/dev/hdb1 /usr/portage for Gentoo
/dev/hdb2 / for arch
So how should I go about installing the boot loader? And I am assuming I would have to appropriately edit the lines of my grub.conf in Gentoo.... this is it currently...
title=Gentoo Linux 2.6.23-r3
# Partition where the kernel image (or operating system) is located
root (hd0,1)
kernel /boot/kernel-2.6.23-gentoo-r3 root=/dev/hda2
title=Gentoo Linux 2.6.23-r3 (rescue)
# Partition where the kernel image (or operating system) is located
root (hd0,1)
kernel /boot/kernel-2.6.23-gentoo-r3 root=/dev/hda2 init=/bin/bb
So would I just add
title=Arch Linux
root (hd1,1)
kernel /boot/vmlinuz26 root=/dev/hdb2 initrd /boot/kernel26.img
to my Gentoo's grub.conf? Or am I just completely off here? Then in addition to that what else would I have to do to get it to dual boot without overwriting my Gentoo's GRUB? I'm just afraid I'll mess it up.
PS: In Arch, all my hard drives are showing up as /dev/sda1, etc., not hda1, if that makes a difference. :-p I was like SCSI? *blinks* XDDDDD But that's normal, right? But I figured since it's Gentoo's GRUB I should use hd*
So woud I just choose to install GRUB for Arch on /dev/sdb2 then, the partition that it's on, since I'm planning on using Gentoo's bootloader, and then just edit gentoo's grub.conf file?
Last edited by violagirl23 (2008-01-30 04:12:20)

tesjo wrote:
Basically right but you should add
title= Arch Linux
root (hd1,1)
kernel /boot/vmlinuz26 root=/dev/hdb2 ro
initrd /boot/kernel26.img
Arch uses a newer library I forget the name, which identifies drives as sdX instead of hdX
Well, I got it working. Thanks! Turns out this is what I needed:
root (hd1,1)
kernel /boot/vmlinuz26 root=/dev/sdb2 ro
initrd /boot/kernel26.img
I tried (sd1,1) and root=/dev/sdb2 at first but it barked at me for the (sd1,1), so I changed it back, and with root=/dev/sdb2 all seems to be well. Thanks!

Product recovery for dual boot T60

I've got a T60 that dual boots windows and Ubuntu. My goal is to reinstall windows on the windows partition while leaving the ubuntu partitions alone. However, the recovery utility appears to only allow for a fully harddrive wipe and reinstallation. Is there a way to reduce the scope of the wipe so that it only wipes and reinstalls on my windows partition? I have no data on the windows side that I need to save, but am trying to avoid having to reinstall Ubuntu as well.
thanks

I too have a similar setup. I'd simply use a windows setup disc to do the install. It's much faster and the product recovery discs install 5year old OS/software/drivers, all of which will need updating anyway.
ThinkPad W-510 i7-820QM(1.73-3.06GHz) Quad Core... ThinkPad T500, T9900, 8gb SSD...FrankNpad T-60p/61p (X9000 2.8ghz) 8gb SSD ips FlexView...ThinkPad T-61p (T9300 2.5ghz) 8gb ram...Thinkpad X-61 Tablet 4gb ram...ThinkPad A-31 (1.9ghz P4 1.5gb ram)

Help me find a sound driver for dual booting G7 with XP

I have a new HP laptop with Windows 8 64 bit.Model Number is: Pavilion G7 22251dx - Serial is {Removed for privacy}
The specs can be found here: http://h10025.www1.hp.com/ewfrf/wc/document?docname=c03561498&cc=ad&dlc=en&lc=en&jumpid=reg_r1002_us...
I have a clean install of Windows 8 64 bit after having wiped my factory default partition and reinstalled Windows under Legacy Bios Mode instead of the default UEFI. I added back all my drivers from the HP support site and Windows 8 is working correctly.
I'm dual booting with XP Pro 32 bit with service pack 3. I have no sound in XP Pro 32 bit. I have spent hours trying drivers and nothing is working.
I need both my video drivers (which are installed) with HD support and I need IDT drivers. Here is the hardware I'm using at least as far as Windows 8 shows.
The bundled sound driver is called sp59620.exe when you download it but it's actualy: IDT High-Definition (HD) Audio Driver VERSION: 6.10.6425.0 REV: A
This hardware information is taken from AIDA64 Extreme, which is a system information tool:
ATI Radeon HDMI (at) AMD K15.1 - High Definition Audio Controller PCI
IDT 92HD87B2/4 (at) AMD Hudson-3 FCH - High Definition Audio Controller PCI
I have searched for the driver manually, and used tools such as Slim Drivers, DriverBoost, Ma-config, DriverPack Solution and none of the drivers work ( also they all recommend different drivers LOL)
I'll be happy to provide any extra information you may need.
Thank you.

Hi:
First install the chipset driver and reboot. First download listed.
http://support.amd.com/us/gpudownload/windows/Pages/raid_windows.aspx#4
See if this XP video driver works
http://h20000.www2.hp.com/bizsupport/TechSupport/SoftwareDescription.jsp?lang=en&cc=US&swItem=ob-107...
See if this XP audio driver works.
http://h20000.www2.hp.com/bizsupport/TechSupport/SoftwareDescription.jsp?lang=en&cc=us&prodTypeId=32...

Arch does not show up in Grub when dual booting with windows 8

I just installed Arch linux, dual booting with windows 8 using the beginners guide[https://wiki.archlinux.org/index.php/Beginners'_Guide] itself. Now Grub is installed and i can only find Windows 8 and I cannot find Arch. Is there a way I can find if arch linux has been installed and show up in Grub.
Sorry, I am a newbie, but i chose to post this topic here and not newbie corner as it is installation related.
My windows 8 is installed on /dev/sda1 with ntfs partition type. Arch Linux is installed on /dev/sda6 and it is ext4 partition. I dont know if this info helps. I am using Thinkpad R61
Last edited by sutro_droid (2013-03-06 00:30:48)

ivokosir wrote:It may be that you didn't install os-prober before running grub-mkconfig. This happened to me once, I hope I'm not too late to warn you.
I am sorry, yes you are too late. I have wiped windows 8 and performed clean install. No regrets. And as a matter of fact, I did grub-config and then installed os-prober. That could be the problem. Thanks. I will try this again another time.

How to best partition the HDD for dual boot: Windows 8 & Linux

Hi,
I'm a newbie in Windows 8, linux, Partition....
I would like to use my new laptop with windows 8 pre-installed to the following:
Create a Dual Boot Windows 8 / Ubuntu
Create on my C drive (unique drive on my laptop):
*a partition for the system
*one for Windows 8
*one for Data and
*last one for Ubuntu OS
My aim is :
-to install VmWare on Windows 8 and run Checkpoint Splat with virtual machines to perform CCSA labs.
to install GNS3 on Ubuntu for CCNP labs but with GNS3 accessing files in the Data partition
I have a Toshiba Satellite with 750Gb and 8 Go RAM.
According to you what's the best size for my partitions?
Is there a better way to partition my C drive regarding my aim?
Best Regards
***I don't know if it's the right section, sorry for that. Feel free to move this thread in the appropriate section***

Hi,
Thank you all,
Isn't it too much 200G for Windows as i will on ly install VMWARE Workstation 9 for lab purposes and possibly a few softwares.
VMWARE installed on Windows will require 2 GB + 1 GB per host (i will use approximatively 15 hosts).
Checkpoint products will be installed on VMWARE that is installed in Windows :
- disk space needed for 3 Checkpoint gateways: 3*37 GB
- disk space needed for 2 Checkpoint gateways management servers: 2*10 GB
On Linux I'll install GNS3 with 10 GB disk space required and a few softwares.
I've got a Toshiba stellite computer with Windows 8 pre-installed.
Processor: Intel(R) Core(TM) i5-3210M CPU @2.5 Ghz
RAM: 8 Go
64 bits OS, processor x64
See below the screenshot
I've taken screenshot of my partition (below).
* Don't take into account the disk 1 (E) partition
Can u confirm that in Disk o, partitions with 450 Mo, 260 Mo and 9.48 Go are for recovery system?
I am planning to let the recovery partition as it is and divide the TI30985500A (C) partition (688 Gb) into:
- 200 Gb windows partition
-100 Gb Linux partition
-388 Gb data partition
What do you think about this partionning regarding the informations i've provided above?
Greets

Satellite S55t-B5233 Shrink disk for dual boot windows 8 and other OS

Hi,
I have a Toshiba Satellite S55t-B5233 Pre-installed with Windows 8.1
I would like to maintain Windows 8 but to dual boot with Windows 7, Ubuntu and OpenSuse, so:
- When I try to Shrink disk C (943371 MB) it says that 'Size of available shrink space in MB = 469651 MB'. The free space in my disk is 885240 MB!
So I would like to know if there is a way to left about 200000 MB for Windows 8? so I could use the rest of space for shrinking for other OS...
- I would instal windows 7, ubuntu and OpenSuse in partitions D, E and F [Partitions that I pretend to create by shrinking C] ... a) does it will void my warrantee? b) does it will render my Windows 8 “Recovery Partition” useless?
thanks in advance...
Gari

Satellite S55t-B5233
I don't recommend you attempt multiple-booting in this new UEFI/GPT world, Gari. Things are more difficult now than they were in the BIOS/MBR world. Best to set up virtual machines using Hyper-V or another free VM to run other OSes.
In answer to your questions,..
a. Toshiba doesn't care what you do with the software. They won't even look at the computer until the drive has been restored to its original out-of-the-box contents.
b. After you mess around with the partition locations, I doubt the recovery partition would be accessible in the normal fashion if at all. Many create a recovery drive and delete the recovery partition first thing.

Partitioning a disk for dual boot

My system disk failed last week. The media just stopped holding a proper magnetic charge so I ended up with loads of bad blocks.
The disk was 120 GB in size.
I replaced it with a 500 GB model. But I didn't need the extra space for the system disk so I partitioned it into 2 drives (Mac OS Extended). The first one I set to 185 GB and the second one I made 300 GB. The rest of the space was lost due to rounding.
I restored the 185 GB partition from my backup copy (Retrospect 5) and was quite satisfied with the results - Mac OS 9.2.2. I also was able to access the other (empty) partition successfully.
I booted the system into 9.2.2 from partition #1 and decided to install OS X on the larger partition. So I loaded up the Tiger Install disk #1. The install process started but when I was asked to select a target drive the empty second partition was not in the list of choices.
Why?
I want to have a dual boot capability on the single drive. How do I do that?
Gary

Not all G4s supported drives greater than 128 GB:
http://support.apple.com/kb/HT2544
http://lowendmac.com/2005/how-big-hard-drive-imac-emac-power-mac-powerbook-ibook /

[SOLVED]Proper Partitioning for Dual-boot

I am attempting to dual-boot Windows XP and Arch, except I've left no free space...
Do I have to reformat?
Also, a question on windows. It uses 1 partition for everything, then allows you to create logical ones, right?
Last edited by Haptic (2011-06-22 04:31:38)

Haptic wrote:
I am attempting to dual-boot Windows XP and Arch, except I've left no free space...
Do I have to reformat?
Also, a question on windows. It uses 1 partition for everything, then allows you to create logical ones, right?
What Mardoct said about resizing w/ gparted is true, so unless you have the data backed-up, do it as your own risk. Can you post a screenshot of a gparted map of your drive?
As you know, Win needs to be the first partition on the drive. You are limited to four primary partitions, so if you want more, make three primary partitions, then the rest of the space an an extended partition. Inside the extended partition, you can add many logical partitions. I'd recommend doing all this from within gparted.
My 1 TB drive example:
/dev/sda1 (primary for windows), 20 gigs
/dev/sda2 (primary for Arch), 20 gigs
/dev/sda3 (backup of my Arch partition), 20 gigs
/dev/sda4 (EXTENDED PARTITION), 873 gigs
/dev/sda5 (logical for /home), 72 gigs
/dev/sda6 (logical for /var), 8 gigs
/dev/sda7 (logical for /boot), 0.11 gigs
/dev/sda8 (logical for /data), 784 gigs
/dev/sda9 (logical for swap), 8 gigs
As a side note, you can also you gparted to copy/paste entire partitions which makes keeping backup very easy. My /dev/sda3 is a periodic backup of my live Arch partition.
Last edited by graysky (2009-09-16 11:15:29)

Reinstall grub for dual boot...

Similar Messages

Maybe you are looking for