Reinstall MI Client with new device ID

Hi guys,
In MI 7.0 I removed a device ID and uninstalled the client.
After reinstallation, I created same user locally and after first sync I received a new device ID.
Then I assigned the xAPPL to the device ID and run new sync.
After sucessfully instalation the old device ID is assigned back to the device.
Therefore I cannot perform any sync since the old device ID has been removed from the server.
Any tips?
Regards,
Renato

Hi Oliver,
As feedback I found the cause of the problem. Since I'm installing the pilot client in a Windows Vista laptop, program files were installed in:
C:/Program Files/SAP Mobile Infrastructure
I don't know why, when you start the application, these files are
transfered to:
C:\Users\<my user>\AppData\Local\VirtualStore\Program Files\SAP Mobile Infrastructure
All time I was uninstalling the MI client, only the C:\Program Files\SAP Mobile Infrastructure were being deleted, but not the other route.
After uninstalling the application I manually deleted the other route.
With new installation, the aplication received a new device ID and it was not assigned automatically to the old one.
Best regards,
Renato

Similar Messages

  • My new Iphone 5 won´t install applications from the cloud. It shows them in itunes but it refuses to sync with new device

    I upgraded from Iphone 4 to a new Iphone 5.
    I transfered all my info succesfully, but my aplications wont work properly: Viber speaker seems disconnected, I am not able to install new apps.
    I´ve restaured and tried to start from scratch, but this time my apps wont even sync.
    Some of my apps show in itunes, but I can´t find the way to sync via Itunes, i dont find the part where it says "allow this new device to install" or something like that.
    Thanks in advance for your help
    Jc

    Thanks a lot!
    One more thing please:
    The only way I am able to install apps in my new Iphone 5 is via Itunes (my computer), I dont seem to be able to download apps from my Iphone.
    In every attempt the phone asks for my password for my Apple ID, which I provide correctly ... and then ... nothing. I hope you can give a hand here.
    Thanks in advance
    Jc

  • How to reinstall apps in a new device. I downlowad from " selection of premium apps" last Dec

    Hi,All
    I downloaded and installed some apps from " selection of premium apps" last December.
    The device I installed was 9780.
    Now, I am starting to use a new 9900 device.
    How to reinstall apps I downloaded in my new 9900?  My old 9780 would be erased.
    The app world store asked my credit card info for charging me again when I tried to reinstall these apps, such as DriveSafe.ly Pro, Photo Editor Ultimate , etc.

    The Apple Support Communities are an international user to user technical support forum. As a man from Mexico, Spanish is my native tongue. I do not speak English very well, however, I do write in English with the aid of the Mac OS X spelling and grammar checks. I also live in a culture perhaps very very different from your own. When offering advice in the ASC, my comments are not meant to be anything more than helpful and certainly not to be taken as insults.
    Apple doesn't sell the iLife apps on a disk any longer and Apple Care doesn't sell Apple software, the Apple Retail store does. The apps this "Apple emplyee" placed for free on your Mac are not the same versions of the apps that came preinstalled on the Mac and they are not the Mac App Store (MAS) versions. And they will not be udates by the MAS. You may be able to get updates through Software Update.
    I doubt that it is a policy of Apple to have its employees installing the iLife apps from an old disk for free on 2nd hand Macs, so others trying to get this done may not be successful.

  • User Id with new device

    I just received my upgrade BB curve 9360, email, internet service,& BB messenger working OK, but when trying to access the App world I can't log in. I used my Id & password on line & login was OK, but the device is not letting me to associate my Id to the new smatphone.  OS is 7.1.0

    Hi and Welcome to the Community!
    What is the exact and complete error message, please?
    Thanks and let us know!
    Occam's Razor nearly always applies when troubleshooting technology issues!
    If anyone has been helpful to you, please show your appreciation by clicking the button inside of their post. Please click here and read, along with the threads to which it links, for helpful information to guide you as you proceed. I always recommend that you treat your BlackBerry like any other computing device, including using a regular backup schedule...click here for an article with instructions.
    Join our BBM Channels
    BSCF General Channel
    PIN: C0001B7B4   Display/Scan Bar Code
    Knowledge Base Updates
    PIN: C0005A9AA   Display/Scan Bar Code

  • Wierd connectivity issue with new devices

    I've got a HomeHub2 linked via the Infinity service at home, had for a while with an array of devices hanging off the wireless (2 x Dell laptop, 1 x Sony, 1 iPad and a Blackberry) and wired connections (BT Vision, Xbox 360, Windows Media Center, Panasonic Blu-ray) - all working fine
    I got an advent laptop as a gift someone and was setting it up and neither wireless or wired connections would work.  I could see the wireless lans and I could enter my WPA key and it would appear to connect but gave the yellow triangle and listed it as "No internet access".... So I took the laptop back to PC world and they replaced with a HP laptop.
    This is suffering exactly the same problem, the only common part of the two systems are Realtek network devices on both laptops and Windows 7.
    I have Win7 on 5 of my existing machines, so thats "probably" not the cause.  But has anyone else seen this issue ?

    I don't think that Windows 7 will be causing the problem... The only constant in both situations is the wifi adapter.
    The hub is set as mixed mode WPA/WPA2 as standard. I'd give it a try and change it to normal WPA in the hub manager.. Then try to connect with the new laptop. See if that fixes it.
    As far as I can remember, you shouldn't have to change any of your other wireless devices to do that. Although they will drop for a moment when you change the security mode. After that, they should detect the hub automatically and reconnect.

  • Just bought new macbook pro and can't get iPhone 4s data pics, music contacts etc to sync with new device, why?

    i have an ipad, iphone, 13" macbook pro and mac mini all whihc run fine.
    i bought new family macbook pro today but cant get my phone 4s to sync its data ie pics, music, contacts etc
    any hints please
    Jim

    Transfer the contents from the old computer to a new computer. With a few exceptions, i-gadgets are designed to match the content of a device to the content on a computer, not really the other way around. You can move iTunes purchases from a device onto a computer, but no music obtained some other way.
    iTunes Store: Transferring purchases from your iOS device or iPod to a computer - http://support.apple.com/kb/HT1848 - only media purchased from iTunes Store

  • Lost Apps with new Device update

    Hello,
    I have lost some apps following the download of the latest OS - Most importantly is my password safe, any suggestions as to how I can recover it?
    Solved!
    Go to Solution.

    Hello mfheatlie,
    welcome to the Community,
    Before upgrading have you got your backup on desktop software ?
    If yes then can , then connect your device to BB desktop software > On BB Desktop software Click applications>
    There you can see all you application List before your upgrade.
    Select on the Application that you want to transfer  then Click APPLY.
    If  your Lost  Apps are paid APPS. and you are not able get it than look at this thread link reinstalling paid apps
    I hope your problem resolves. Good Luck.
    Click " Like " if you want to Thank someone.
    If Problem Resolves mark the post(s) as " Solution ", so that other can make use of it.

  • LMS config deployement with new device

    Hello,
    I have recovered some configuration files from my 2950 switches with the Configuration Archive Tool in LMS.
    Now, I'd like to replace my old 2950s by 2960 switches, which have the same number of ports.
    Will there be any issue if I copy the exact same config from 2950 to 2960 ? Will some features not work or is everything interoperable ?
    Here's an extract of the config :
    Global
    version 12.1
    no service pad
    service timestamps debug  datetime
    service timestamps log datetime
    no service password-encryption
    hostname sw48
    logging buffered 20000 debugging
    enable secret 5  ********
    enable password ********
    clock timezone UTC 1
    clock  summer-time UTC recurring last Sun Mar 2:00 last Sun Oct 3:00
    ntp  clock-period 17179870
    ntp server 192.168.32.17
    ntp server 192.168.32.18
    IP
    IP Global
    ip subnet-zero
    ip default-gateway  172.25.1.1
    ip http server
    Spanning Tree
    spanning-tree mode  rapid-pvst
    no spanning-tree optimize bpdu transmission
    spanning-tree  extend system-id
    Interface
    Interface FastEthernet0/1
    interface FastEthernet0/1
    switchport trunk allowed vlan 1,17,1001-1005
    switchport mode trunk
    switchport voice vlan 17
    spanning-tree  portfast
    Interface Vlan1
    interface Vlan1
    no ip address
    no ip  route-cache
    shutdown
    Interface Vlan25
    interface Vlan25
    ip  address 172.25.11.48 255.255.0.0
    no ip route-cache
    SNMP
    snmp-server community ******** RO
    snmp-server community ******** RW
    Line
    Line con 0
    line con 0
    Line vty 0 4
    line vty 0 4
    password ********
    login
    Line vty 5 15
    line vty 5 15
    password ********
    login
    Thank you for your further help !

    The 2960 is just an upgrade of the 2950 switch much like the 2960S is an upgrade of the 2960 so there should be no major problems unless there are some weird commands on the interfaces themselves. Nothing shown above looks like it wouldn't work to me.
    You may want to go through the config a little, having enable secret and enable password is worthless, only keep enable secret, it is more secure. service password-encryption and some ACL's on SNMP might also be worth considering, depends how security concencious you are. Also the new enable secret command on IOS 15.1+ I think uses encryption type 4 to encrypt the password, again more secure but up to you. I'm guessing this is more about will it work rather than pointing out best practices that are fairly well documented by many others.
    If you do come across a line of unsupported config the 2960 should give a warning or error anyway, things don't go boom and blow blue smoke, most of the time anyway.

  • I updated wifi in home with new device. laptops and iphone connected just fine.. Ipad connects to wifi but says no internet access..  update the ipad thru itunes, tried forgetting and resetting network.. HELP!!!!

    Any help on this?/  this is crazy..  both iphones and laptops connect and work just fine.. our ipads will not connect...    very strange

    Help is right here for you Omichael! Let's get you conneted
    to your home wifi. May I ask are you able to connect to other wifi networks? If
    so then please forget your home network again, turn wifi off, reboot, and
    retest. If this doesn't work then you will want to reset network settings.
    Settings > General > Reset > Reset Network Settings. Keep in mind that
    this will delete ALL wifi passwords that you have saved.
    ArnettH_VZW
    Follow us on Twitter @VZWSupport

  • Nokia MD-51W JBL PlayUp only works with old device...

    I've got this portable speaker and have used it for a while with an older Bluetooth 2.1 + EDR enabled phone, now switching to newer phone and the speaker connects, but no sound coming out of the speaker. Tried with various Bluetooth 3+ devices like HTC One X, Iphone, Samsung GS4 and the speaker is not working with any of them. Since higher Bluetooth versions are backward compatible with lower versioned devices, it should not be any problem I think. Running latest software on the speaker (same one as it was shipped with, 0.63). Any chances to get the speaker working with newer devices?

    lbcarv wrote:
    I have the same problem, using Nokia Lumia 820 or iPhone4. No sound from the speaker, even in bluetooth, NFC or cable connection. Did you solve your problem???
    Welcome to Nokia Discussions, lbcarv.
    If there is no sound output coming out on all connecitivity mode, even on direct cable connection. I'd advise sending the device to the store of origin or to a Nokia Care Centre in your area.
    Good luck

  • Update 2.0, is it included with new touches?

    I was just wondering, because I want to know if I get an iPod touch, if I'll have to pay $10 for the update to install apps, etc. or if it is included with new devices.
    Thanks.

    Hey
    If you purchase an iPod online from the Apple Store it will have the latest software available.
    http://store.apple.com/
    Jason

  • I had to replace my Iphone 5c with a new one.  Now, my windows 7 pc does not recognize my iphone.  Reinstalled itunes.  Apple mobile device is running.  I did whatever I could find on the internet still no luck.  Any suggestions?  Thnx

    I had to replace my Iphone 5c with a new one.  Now, my windows 7 pc does not recognize my iphone.  Reinstalled itunes.  Apple mobile device is running.  I did whatever I could find on the internet still no luck.  Any suggestions?  Thnx

    You have done everything verbatim included with this link?
    http://support.apple.com/kb/ts1538

  • Resetting a mobile client (new device ID)

    Hi,
    We often experience that mobile clients have to be re-installed due to synchronization problems. Using the Reset feature on the client does not solve the problem so we have to start from scratch each time.
    First the client is un-installed, a new client installed and then we start all over again with the distribution of applications & data. This process is VERY troublesome but SAP does not seem to have an alternative.
    Are you familiar with a good solution for resetting the client including the device ID, so the MI Client can be re-used? This way we could avoid the re-installation of the client which is also an issue due to the laptop user authorization concept.
    We are using SAP NetWeaver 2004s SP12 and MI Client 7.0 SP12 patch 5
    Looking forward to your advice.
    Kind regards
    Christian

    Hi Christian,
    there are two possible ways: first you do a complete installation if MI on the client, add DB2e manually and enter the settings in mobileengine.config manually. This all happens without logon to MI and for sure without sync. If this is the case, you can create a copy of that folder and store it on device for later reference. All you have to do then is to copy this folder from SD card to \ and you have a running version. Register user, sync - and you have deviceID and start from scratch with sync and so on....
    If users have different Versions of the App - please use the Profiles - all user that share the same profile will have the same version of the software by default - so this problem should be solved then as well.
    The confusion about the Reset button is perhaps that you expect something else then it finally does. All it does is to remove the complete data from the persistence stack. But all general MI settings like Mobile ID, Device ID, SyncKey and so forth still are in the last value. If you have problems with data inside the APP, then this button is ok, but it will not reset the MI installation back to initial!
    Perhaps these two blogs will help you:
    Reinitialize MI client without reinstallation in seconds! Part 1&2
    /people/sap.user72/blog/2005/11/17/reinitialize-mi-client-without-reinstallation-in-seconds
    /people/sap.user72/blog/2005/12/01/reinitialize-mi-client-without-reinstallation-in-seconds-part-2
    Hope this helps to solve your issue!
    Regards,
    Oliver

  • I have acquired a new laptop and wish to transfer my use of the creative cloud from my old laptop to my new one. How do I uninstall and then reinstall on the new device ?

    I have acquired a new lap top and wish to transfer my use of the Creative Cloud from my old laptop. How do I uninstall and then reinstall on the new device ?

    Richardwmills for information on how to install the Adobe Creative applications included with your membership please see Install and update apps - https://helpx.adobe.com/creative-cloud/help/install-apps.html.

  • I just want to reinstall windows 7. will i face any problem while syncing with new itunes, i just want to reinstall windows 7. will i face any problem while syncing with new itunes???

    i just want to reinstall windows 7. will i face any problem while syncing with new itunes, i just want to reinstall windows 7. will i face any problem while syncing with new itunes???

    Syncing to a new iTunes library or computer will erase your iPhone. Only if you back up your phone manually before syncing, you can restore your device from that backup again. A manual backup does not include the sync process.
    Do this:
    Disable autosync in iTunes, connect your phone to your new computer and right click on it in the device list and choose backup. iTunes will backup your iPhone without syncing.
    Transfer your purchases the same way, choosing "transfer purchases" this time.
    When you connect your phone for the first time, all media content will be erased. But you can restore your settings and app data from your manual backup afterwards.
    Don't forget to set up at least one contact and event on your new computer to be able to merge calendars and contacts when you sync the iPhone for the first time.
    Music is one way only, from the computer to your device, unless you bought the songs in itunes and transferred your purchases.
    There is 3rd party software out there, but not supported by Apple, see this thread: http://discussions.apple.com/thread.jspa?threadID=2013615&tstart=0
    About backups and what's saved: http://support.apple.com/kb/HT4946
    How to back up and restore:http://support.apple.com/kb/HT1414
    How to download apps for free again:http://support.apple.com/kb/HT2519
    Saving other data is also described here. How to back up your data and set up as a new device
    You can also back up iTunes and restore it on your new computer How to back up your media in iTunes ,but the iPhone will be erased anyway during the first sync.

Maybe you are looking for