Reinstall of ADFS 3.0 fails during configuration step with error ADRepository.CreateTopContainer

I am installing ADFS 3.0 alongside an existing ADFS 2.0 farm.  I followed the steps as detailed here:
http://office365support.ca/migrating-ad-fs-2-0-to-ad-fs-3-0-for-office365-single-sign-on-2/
That worked fine initially, but I ran into problems and decided to remove ADFS 3.0 completely and start over.  When I rerun the the Active Directory Federation Services Configuration Wizard, it gets almost all the way through, but fails with a generic
error of: An error occurred while trying to configure this machine.  
Down below in the Detailed operation results, it displays:
ADRepository.CreateTopContainer
I am guessing I haven't cleared out something in Active Directory, but I'm not sure what that is.
In my research, I found suggestions for deleting everything under ProgramData\Microsoft\ADFS, but I don't believe I can do that since I am still relying on the ADFS 2.0 installation until I can cut over.
Any help would be much appreciated.
Regards,
David Collins

ADFS 2.0 uses IIS and so the installation is under /inetpub/adfs/ls.
There's also a backup here:
ADFS : Restoring / re-installing ADFS v 2.0.

Similar Messages

  • Encoding failed in "file name" with error: -43

    Hi!
    I've tried everything but still, after about 20 hours of encoding DVD Studio Pro just stoppes, saying "encoding failed in "file name" with error: -43". The movie is in DV PAL format and made in Final Cut Pro version 5. I'm using DVD Studio Pro 4.0. The movie is about 1 hour and 30 minutes long and I'm trying to put it on a double layer DVD. I've tried to shorten it (it was nearly 2 hours before), but that didn't help. I also tried to shorten it even more and put it on a single layer DVD, but still the same message.
    So if somebody has any idea of how I can solve this problem, please let me know as soon as possible!
    Thank you!

    Error -43 means "File not found." If you are compressing from a reference movie, make sure that all referenced movie clips are present on the disk and that permission settings are not preventing DVD Studio Pro from accessing them.
    Error -1309 means "Out of bounds." This means that the source file is pretending to be bigger than it actually is.
    So it sounds like there are issues with your source movie.
    P.S. Compressor has a much better MPEG-2 encoder and I would recommend using that instead.

  • Cannot start VM - IDE Emulator Failed to Power on with Error 'The service cannot be started, either because it is disabled or because it has no enabled devices associated with it.'

    HI all.
    New install of 2008R2 on HP DL-380 G6.  I have created (several) VM's none of which will start.  If I remove the IDE Hard Disk and add a DVD of the OS ISO, it will boot and start the install (although with no HDD). 
    It seems like the IDE controller is working ok - it is what the DVD drive is using, but it cannot mount a VHD.  The error indicates a driver is not working (although the DVD on IDE works fine) so something to do with VHD?  I can attach the VHD
    in disk management, so it does not seem corrupt - again I have tried with both dynamic and fixed VHDs.
    Full error is:
    'Test1' failed to start. (Virtual machine ID 4320D2D6-DF7E-40D2-BD0F-9562CBB9F052)
    'Test1' Microsoft Emulated IDE Controller (Instance ID {83F8638B-8DCA-4152-9EDA-2CA8B33039B4}): Failed to Power on with Error 'The service cannot be started, either because it is disabled or because it has no enabled devices associated with it.' (0x80070422).
    (Virtual machine ID 4320D2D6-DF7E-40D2-BD0F-9562CBB9F052)
    'Test1': Failed to open attachment 'C:\Users\Public\Documents\Hyper-V\Virtual hard disks\New Virtual Hard Disk.vhd'. Error: 'The service cannot be started, either because it is disabled or because it has no enabled devices associated with it.' (0x80070422).
    (Virtual machine ID 4320D2D6-DF7E-40D2-BD0F-9562CBB9F052)
    Any Ideas?

    Hi ,
    Did  you try to disable the services , if they are exsit :
    HP Smart Array SAS/SATAEvent notification
    HP Insight storage agents
    Then restart your server .
    Best Regards
    Elton Ji
    We
    are trying to better understand customer views on social support experience, so your participation in this
    interview project would be greatly appreciated if you have time.
    Thanks for helping make community forums a great place.

  • Validation of header fails againts XSD definition with error (BEA-382505 )

    Hi
    Were facing a problem when we try defining xsd:string in proxy services XSD.
    Were using ALSB 2.6 on Windows
    Validation of header fails againts XSD definition with error :
    BEA-382505
    ALSB Validate action failed validation
    Invalid xsi:type qname: 'xsd:string' in element bruger@http://entity/infrastruktur/subject_v3
    aa94aec2-c699-456f-b9b3-c61a1bc06511
    Validation is performed against an XSD containing the header defintion.
    ALSB validation fails while other tests show that XML document is valid against its definition (validated by XMLSpy, jdk 5 JAXB based marshalling/unmarshalling and jdk 5 JAXP validation code).
    Anyone have an idea way this happens ??
    Edited by henrikbec at 08/03/2007 1:39 AM

    hi
    a crap. No this should have been writen in the AquaLogic Service Bus Newsgroup

  • Web client configuration assistent failed during configuration

    Hello,
    I am trying to install OCS on RH ES 3.0.
    Infrastructure, Information storage and middle tier are on the same machine.
    During middle tier installtion , i have selected following components at a time oracle files,oracle calender assiatent, web conferencing, portal.
    But during configuration "webclient configuration assistent" and "infrasturucture phase 2 assistent" failed.
    can anyone help me, for solving this problem ASAP.
    Thanks and Regards,
    Sarita

    It would help to know which release you are installing? for general help, please look at the install guide or the OCS admin guide.

  • Shared services registration failing during configuration of EPMA 11.1.1.3

    Hi All, I am currently woking on essbase and no knowledge of planning so trying to upgrade my knowledge. I installed epma 11.1.1.3 on windows 2003 VMware work station as I have windows 7 laptop. installed oracle 10g created a database (epma) created user/schemas (sm,ms) trying to configure foundation services, essbase, planning and reporting and analysis. the configure database and register with shared services failed. Am I doing anything wrong. I followed some documents for configuration which are well documented with screen shots still do not know what wrong I am doing. Please advice on how to avoid these failures.
    Below is the validation results of the configuration.
    Thanks in advance.
    Srinivas
    Oracle EPM System
    Diagnostic Reports
    Generated on 3/3/12 11:05 PM
    Validation run on srinivas
    Validation tool info: 11.1.1.3.0 drop 9-0 build 3129 on 07/16/2009 01:24 PM
    OS name: Windows 2003
    OS version: 5.2
    Test Status Service Test Description Duration
    Hyperion Foundation
    FAILED CFG: Configuration Check whether all configuration tasks have been completed
    Error: Next tasks are not configured:
    relationalStorageConfiguration: Configuration Failed
    Recommended Action: Try to configure mentioned tasks 0 s
    FAILED OPN: OpenLDAP Check if global roles number no less than 16
    Error: $item.exception.localizedMessage
    Recommended Action: 0 s
    FAILED OPN: OpenLDAP Connection to OpenLDAP
    Error: srinivas:28089
    Recommended Action: Start open LDAP 1 s
    ERP Integrator
    PASSED CFG: Configuration WARNING: Some of suggested configuration tasks not completed yet.
    Check whether all configuration tasks have been completed 0 s
    Essbase / Client
    PASSED WR: Windows Registry Check if EQD excel addin registered for Essbase Client 0 s
    Essbase / Essbase
    FAILED CFG: Configuration Check whether all configuration tasks have been completed
    Error: Next tasks are not configured:
    hubRegistration: Configuration Failed
    Recommended Action: Try to configure mentioned tasks 0 s
    FAILED EAS: Essbase server Essbase Server startup check using Maxl command
    Error: Result: Unable to connect Essbase Server using MAXL command. Please check that essbase server is running.
    Recommended Action: Check Essbase Server is started. 0 s
    FAILED SVR: Essbase Java API Launch external checker with next command: C:\Hyperion\common\validation\9.5.0.0\launchEssbaseJavaAPI.bat EssbaseJAPIConnect admin ****** srinivas http://srinivas:13080/aps/JAPI
    Error: Result: -1; Error message: Cannot connect to olap service. Cannot connect to Essbase Server at srinivas. Timed out waiting to connect to the Essbase Agent/Server using TCP/IP. Check your network connections.
    Recommended Action: Make sure external checker is working. 7 s
    Essbase / Essbase Administration Services
    FAILED CFG: Configuration Check whether all configuration tasks have been completed
    Error: Next tasks are not configured:
    hubRegistration: Configuration Failed
    Some of suggested configuration tasks not completed yet.
    Recommended Action: Try to configure mentioned tasks 0 s
    Essbase / Provider Services
    FAILED CFG: Configuration Check whether all configuration tasks have been completed
    Error: Next tasks are not configured:
    hubRegistration: Configuration Failed
    Recommended Action: Try to configure mentioned tasks 0 s
    Essbase / Smart Search
    PASSED CFG: Configuration Check whether all configuration tasks have been completed 0 s
    Essbase / Studio
    FAILED CFG: Configuration Check whether all configuration tasks have been completed
    Error: Next tasks are not configured:
    hubRegistration: Configuration Failed
    Some of suggested configuration tasks not completed yet.
    Recommended Action: Try to configure mentioned tasks 0 s
    Financial Data Quality Management
    PASSED CFG: Configuration WARNING: Some of suggested configuration tasks not completed yet.
    Check whether all configuration tasks have been completed 0 s
    Foundation / Calculation Manager
    FAILED CFG: Configuration Check whether all configuration tasks have been completed
    Error: Next tasks are not configured:
    hubRegistration: Configuration Failed
    Some of suggested configuration tasks not completed yet.
    Recommended Action: Try to configure mentioned tasks 0 s
    Foundation / Performance Management Architect
    FAILED CFG: Configuration Check whether all configuration tasks have been completed
    Error: Next tasks are not configured:
    hubRegistration: Configuration Failed
    Some of suggested configuration tasks not completed yet.
    Recommended Action: Try to configure mentioned tasks 0 s
    Foundation / Workspace
    FAILED CFG: Configuration Check whether all configuration tasks have been completed
    Error: Next tasks are not configured:
    hubRegistration: Configuration Failed
    Some of suggested configuration tasks not completed yet.
    Recommended Action: Try to configure mentioned tasks 0 s
    PASSED HTTP: Http Is file [C:\Hyperion\common\httpServers\Apache\2.0.59\bin\installhyperionapacheservice.err] empty 0 s
    PASSED HTTP: Http Check string [LoadModule jk_module modules/mod_jk] in file[C:\Hyperion\common\httpServers\Apache\2.0.59\conf\httpd.conf] 0 s
    PASSED REG: Registry All links are present in registry. 0 s
    Performance Scorecard
    PASSED CFG: Configuration WARNING: Some of suggested configuration tasks not completed yet.
    Check whether all configuration tasks have been completed 0 s
    Planning
    FAILED CFG: Configuration Check whether all configuration tasks have been completed
    Error: Next tasks are not configured:
    hubRegistration: Configuration Failed
    applicationServerDeployment: Configuration Failed
    Some of suggested configuration tasks not completed yet.
    Recommended Action: Try to configure mentioned tasks 0 s
    Profitability and Cost Management
    PASSED CFG: Configuration WARNING: Some of suggested configuration tasks not completed yet.
    Check whether all configuration tasks have been completed 0 s
    Strategic Finance
    PASSED CFG: Configuration WARNING: Some of suggested configuration tasks not completed yet.
    Check whether all configuration tasks have been completed 0 s
    Financial Management
    PASSED CFG: Configuration WARNING: Some of suggested configuration tasks not completed yet.
    Check whether all configuration tasks have been completed 0 s
    Reporting and Analysis
    PASSED CFG: Configuration Check whether all configuration tasks have been completed 0 s
    FAILED SVR: Essbase Java API Launch external checker with next command: C:\Hyperion\common\validation\9.5.0.0\launchEssbaseJavaAPI.bat EssbaseJAPIConnect admin ****** srinivas http://srinivas:13080/aps/JAPI
    Error: Result: -1; Error message: Cannot connect to olap service. Cannot connect to Essbase Server at srinivas. Timed out waiting to connect to the Essbase Agent/Server using TCP/IP. Check your network connections.
    Recommended Action: Make sure external checker is working. 3 s
    Test start time: 11:05:18 PM
    Test end time: 11:05:40 PM
    Total test duration: 21 s

    Thanks to all for your suggestions. Below is the log I have checked at the first instance of failure after that resitering with shared services failed for every product. Is this something to do withis database connection? Please advise on how to resolve it.
    Mar 6, 2012 10:48:54 AM org.apache.coyote.http11.Http11BaseProtocol init
    INFO: Initializing Coyote HTTP/1.1 on http-28080
    Mar 6, 2012 10:48:54 AM org.apache.catalina.startup.Catalina load
    INFO: Initialization processed in 3531 ms
    Mar 6, 2012 10:48:54 AM org.apache.catalina.core.StandardService start
    INFO: Starting service Catalina
    Mar 6, 2012 10:48:54 AM org.apache.catalina.core.StandardEngine start
    INFO: Starting Servlet Engine: Hyperion Embedded Java Container/1.0.0
    Mar 6, 2012 10:48:55 AM org.apache.catalina.core.StandardHost start
    INFO: XML validation disabled
    log dir isC:\Hyperion\logs\SharedServices9
    urlManifest jar:file:/C:/Hyperion/deployments/Tomcat5/SharedServices9/webapps/interop/WEB-INF/lib/interop-mmc.jar!/META-INF/MANIFEST.MF
    Shared Services Version: 11.1.1.3.24
    Shared Services Drop Number: 6
    Attempting to verify the database configuration
    Attempting to verify the database configuration
    Database configuration test passed.
    06 Mar 2012 10:50:27 - org.apache.slide.common.Domain - INFO - Auto-Initializing Domain
    06 Mar 2012 10:50:27 - org.apache.slide.common.Domain - INFO - Configuration found in classpath
    06 Mar 2012 10:50:27 - org.apache.slide.common.Domain - INFO - Domain configuration : {org.apache.slide.lock=true, org.apache.slide.versioncontrol=true, org.apache.slide.debug=false, org.apache.slide.search=true, org.apache.slide.security=true, org.apache.slide.urlEncoding=UTF-8, org.apache.slide.domain=C:/Hyperion/deployments/Tomcat5/SharedServices9/config/Domain.xml}
    configURL: file:///C:/Hyperion/deployments/Tomcat5/SharedServices9/config/CSS.xml
    Done initialize: null
    06 Mar 2012 10:50:35 - org.apache.slide.common.Domain - ERROR - Unable to migrate hub groups to css
    connection pool registered:dbcpPool-org.apache.commons.pool.impl.GenericObjectPool@9b2a51
    connection pool registered:dbcpPool-org.apache.commons.pool.impl.GenericObjectPool@2431b9
    CMSOfflineServlet Initialized
    2012-03-06 10:50:42,328 [main] ERROR com.hyperion.ces.utils.db.DBRegistryManager.<init>(DBRegistryManager.java:74) - Failed to get Registry Instance! DB Connection is not existing for SharedService. Check registry for SharedService.
    2012-03-06 10:50:42,328 [main] ERROR com.hyperion.workflow.engine.server.repository.WfDomainStoreRdbms.initialize(WfDomainStoreRdbms.java:167) - java.lang.Exception: Failed to get Registry Instance! DB Connection is not existing for SharedService. Check registry for SharedService.
    2012-03-06 10:50:42,328 [main] ERROR com.hyperion.workflow.engine.server.repository.WfDomainStoreRdbms.initialize(WfDomainStoreRdbms.java:167) - java.lang.Exception: Failed to get Registry Instance! DB Connection is not existing for SharedService. Check registry for SharedService.
    2012-03-06 10:50:42,343 [main] ERROR com.hyperion.cesdsf.server.framework.DsfServer.init(DsfServer.java:51) - com.hyperion.workflow.engine.api.base.WfException: Failed to get Registry Instance! DB Connection is not existing for SharedService. Check registry for SharedService.
    2012-03-06 10:50:42,390 [main] ERROR com.hyperion.workflow.engine.server.framework.WorkflowEngineServiceLocal.wfx(WorkflowEngineServiceLocal.java:2584) - Cannot getUsers.
    java.lang.NullPointerException
         at com.hyperion.workflow.engine.server.framework.WorkflowEngineServiceLocal.getUsers(WorkflowEngineServiceLocal.java:780)
         at com.hyperion.workflow.engine.server.framework.WorkflowEngineServiceLocal.getUserFromCES(WorkflowEngineServiceLocal.java:536)
         at com.hyperion.workflow.engine.server.framework.WorkflowEngineServiceLocal.systemSignOn(WorkflowEngineServiceLocal.java:341)
         at com.hyperion.workflow.engine.server.framework.WorkflowEngineServiceLocal.signOn(WorkflowEngineServiceLocal.java:387)
         at com.hyperion.workflow.engine.api.base.WorkflowEngine.signOn(WorkflowEngine.java:80)
         at com.hyperion.workflow.engine.api.base.WorkflowEngine.trustedSignOn(WorkflowEngine.java:94)
         at com.hyperion.workflow.engine.api.base.WorkflowEngine.trustedSignOn(WorkflowEngine.java:90)
         at com.hyperion.workflow.agent.TaskReceiver.init(TaskReceiver.java:34)
         at javax.servlet.GenericServlet.init(GenericServlet.java:211)
         at org.apache.catalina.core.StandardWrapper.loadServlet(StandardWrapper.java:1105)
         at org.apache.catalina.core.StandardWrapper.load(StandardWrapper.java:932)
         at org.apache.catalina.core.StandardContext.loadOnStartup(StandardContext.java:3917)
         at org.apache.catalina.core.StandardContext.start(StandardContext.java:4201)
         at org.apache.catalina.core.ContainerBase.addChildInternal(ContainerBase.java:759)
         at org.apache.catalina.core.ContainerBase.addChild(ContainerBase.java:739)
         at org.apache.catalina.core.StandardHost.addChild(StandardHost.java:524)
         at org.apache.catalina.startup.HostConfig.deployDirectory(HostConfig.java:904)
         at org.apache.catalina.startup.HostConfig.deployDirectories(HostConfig.java:867)
         at org.apache.catalina.startup.HostConfig.deployApps(HostConfig.java:474)
         at org.apache.catalina.startup.HostConfig.start(HostConfig.java:1122)
         at org.apache.catalina.startup.HostConfig.lifecycleEvent(HostConfig.java:310)
         at org.apache.catalina.util.LifecycleSupport.fireLifecycleEvent(LifecycleSupport.java:119)
         at org.apache.catalina.core.ContainerBase.start(ContainerBase.java:1021)
         at org.apache.catalina.core.StandardHost.start(StandardHost.java:718)
         at org.apache.catalina.core.ContainerBase.start(ContainerBase.java:1013)
         at org.apache.catalina.core.StandardEngine.start(StandardEngine.java:442)
         at org.apache.catalina.core.StandardService.start(StandardService.java:450)
         at org.apache.catalina.core.StandardServer.start(StandardServer.java:709)
         at org.apache.catalina.startup.Catalina.start(Catalina.java:551)
         at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
         at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
         at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
         at java.lang.reflect.Method.invoke(Method.java:585)
         at org.apache.catalina.startup.Bootstrap.start(Bootstrap.java:294)
         at org.apache.catalina.startup.Bootstrap.main(Bootstrap.java:432)
    2012-03-06 10:50:42,390 [main] ERROR com.hyperion.workflow.engine.server.framework.WorkflowEngineServiceLocal.wfx(WorkflowEngineServiceLocal.java:2584) - Cannot signOn.
    com.hyperion.workflow.engine.api.base.WfException: Cannot getUsers.null
         at com.hyperion.workflow.engine.server.framework.WorkflowEngineServiceLocal.wfx(WorkflowEngineServiceLocal.java:2593)
         at com.hyperion.workflow.engine.server.framework.WorkflowEngineServiceLocal.getUsers(WorkflowEngineServiceLocal.java:782)
         at com.hyperion.workflow.engine.server.framework.WorkflowEngineServiceLocal.getUserFromCES(WorkflowEngineServiceLocal.java:536)
         at com.hyperion.workflow.engine.server.framework.WorkflowEngineServiceLocal.systemSignOn(WorkflowEngineServiceLocal.java:341)
         at com.hyperion.workflow.engine.server.framework.WorkflowEngineServiceLocal.signOn(WorkflowEngineServiceLocal.java:387)
         at com.hyperion.workflow.engine.api.base.WorkflowEngine.signOn(WorkflowEngine.java:80)
         at com.hyperion.workflow.engine.api.base.WorkflowEngine.trustedSignOn(WorkflowEngine.java:94)
         at com.hyperion.workflow.engine.api.base.WorkflowEngine.trustedSignOn(WorkflowEngine.java:90)
         at com.hyperion.workflow.agent.TaskReceiver.init(TaskReceiver.java:34)
         at javax.servlet.GenericServlet.init(GenericServlet.java:211)
         at org.apache.catalina.core.StandardWrapper.loadServlet(StandardWrapper.java:1105)
         at org.apache.catalina.core.StandardWrapper.load(StandardWrapper.java:932)
         at org.apache.catalina.core.StandardContext.loadOnStartup(StandardContext.java:3917)
         at org.apache.catalina.core.StandardContext.start(StandardContext.java:4201)
         at org.apache.catalina.core.ContainerBase.addChildInternal(ContainerBase.java:759)
         at org.apache.catalina.core.ContainerBase.addChild(ContainerBase.java:739)
         at org.apache.catalina.core.StandardHost.addChild(StandardHost.java:524)
         at org.apache.catalina.startup.HostConfig.deployDirectory(HostConfig.java:904)
         at org.apache.catalina.startup.HostConfig.deployDirectories(HostConfig.java:867)
         at org.apache.catalina.startup.HostConfig.deployApps(HostConfig.java:474)
         at org.apache.catalina.startup.HostConfig.start(HostConfig.java:1122)
         at org.apache.catalina.startup.HostConfig.lifecycleEvent(HostConfig.java:310)
         at org.apache.catalina.util.LifecycleSupport.fireLifecycleEvent(LifecycleSupport.java:119)
         at org.apache.catalina.core.ContainerBase.start(ContainerBase.java:1021)
         at org.apache.catalina.core.StandardHost.start(StandardHost.java:718)
         at org.apache.catalina.core.ContainerBase.start(ContainerBase.java:1013)
         at org.apache.catalina.core.StandardEngine.start(StandardEngine.java:442)
         at org.apache.catalina.core.StandardService.start(StandardService.java:450)
         at org.apache.catalina.core.StandardServer.start(StandardServer.java:709)
         at org.apache.catalina.startup.Catalina.start(Catalina.java:551)
         at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
         at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
         at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
         at java.lang.reflect.Method.invoke(Method.java:585)
         at org.apache.catalina.startup.Bootstrap.start(Bootstrap.java:294)
         at org.apache.catalina.startup.Bootstrap.main(Bootstrap.java:432)
    2012-03-06 10:50:42,390 [main] ERROR com.hyperion.workflow.agent.TaskReceiver.init(TaskReceiver.java:39) - Error Getting the workflowEngine Cannot signOn.Cannot getUsers.null
    Mar 6, 2012 10:50:42 AM org.apache.coyote.http11.Http11BaseProtocol start
    INFO: Starting Coyote HTTP/1.1 on http-28080
    Mar 6, 2012 10:50:43 AM org.apache.jk.common.ChannelSocket init
    INFO: JK: ajp13 listening on /0.0.0.0:28082
    Mar 6, 2012 10:50:43 AM org.apache.jk.server.JkMain start
    INFO: Jk running ID=0 time=0/125 config=null
    Mar 6, 2012 10:50:43 AM org.apache.catalina.startup.Catalina start
    INFO: Server startup in 108250 ms

  • Reinstalling SCSM 2012 SP1 -- installation fails on Finalize step "while executing a custom action:RollbackCleanup" -- absolutely stumped!

    I uninstalled a previous installation of SCSM 2012 in our lab environment because the person who installed it is didn't give anyone else permissions and they weren't available to make the change.  Since then, I've tried to install SCSM 2012 multiple
    times and it fails every time during the Finalize step with the error shown in the picture below.
    Things I've tried and double checked:
    I am running the install with a domain admin account
    I'm specifying a domain user service account during install which is local administrator on the machine
    I rebuilt the performance counters
    I'm running SQL 2k8 R2 SP2
    .Net 3.5.1 is installed
    I see the following message in the System Event Log during setup:
    Event 7036 - The System Center Data Access Service service entered the running state.
    Event 7031 - The System Center Data Access Service service terminated unexpectedly. 
    It has done this 1 time(s).  The following corrective action will be taken in 60000 milliseconds: Restart the service.
    It appears as though this happens 18 times before the service is no longer restarted and is left terminated.
    Any thoughts or help on how to get this to work would be greatly appreciated!  Log excerpts are below as well as a link to the full log file at the end.
    Chris
    Errors in the log that make me go "hmm…" 
    I changed my domain and username in the logs to "DOMAIN" and "user" respectively. 
    MSI (s) (74!94) [10:29:06:718]: Note: 1: 2711 2: MOMServer
    Action start 10:29:06: _SetHealthServiceConfig.80B659D9_F758_4E7D_B4FA_E53FC737DCC9.
    GetMsiFeatureState: Failed to get feature state. Error Code: 0x80070646. MOMServer
    MSI (s) (74!94) [10:29:06:719]: Note: 1: 2711 2: MOMGateway
    SetHealthServiceConfig: Failed to get Feature State.. Error Code: 0x80070646. MOMServer
    GetMsiFeatureState: Failed to get feature state. Error Code: 0x80070646. MOMGateway
    MSI (s) (74:04) [10:49:58:011]: Executing op: ActionStart(Name=_ExecuteSqlScripts,Description=Configuring Database,Template=[1])
    The installer has encountered an unexpected error installing this package. This may indicate a problem with this package. The error code is 2769. The arguments are: _MPProcessorDeferred, 9923,
    Calling custom action CAManaged!Microsoft.MOMv3.Setup.MOMv3ManagedCAs.RegisterSdkSCP
    RegisterSdkSCP: Old serviceConnectionPoint found
    RegisterSdkSCP: Deleting existing serviceConnectionPoint
    RegisterSdkSCP: Warning: Dont have access to delete existing serviceConnectionPoint
    RegisterSdkSCP: Creating New serviceConnectionPoint
    RegisterSdkSCP: Adding ACL for current user: DOMAIN\account
    RegisterSdkSCP: Adding ACL for SM Admini: DOMAIN\SCSM Admins
    RegisterSdkSCP: Error: The object already exists.
    Calling custom action CAManaged!Microsoft.MOMv3.Setup.MOMv3ManagedCAs.WaitForSDKServiceStart
    WaitForSDKServiceStart:Entering
    WaitForSDKServiceStart:Sleeping for SDK to start 0 seconds
    WaitForSDKServiceStart:Sleeping for SDK to start 10 seconds
    WaitForSDKServiceStart:Sleeping for SDK to start 20 seconds
    WaitForSDKServiceStart:Sleeping for SDK to start 30 seconds
    WaitForSDKServiceStart:Sleeping for SDK to start 40 seconds
    WaitForSDKServiceStart:Sleeping for SDK to start 50 seconds
    WaitForSDKServiceStart:Sleeping for SDK to start 60 seconds
    WaitForSDKServiceStart:Sleeping for SDK to start 70 seconds
    WaitForSDKServiceStart:Sleeping for SDK to start 80 seconds
    WaitForSDKServiceStart:Sleeping for SDK to start 90 seconds
    WaitForSDKServiceStart:Sleeping for SDK to start 100 seconds
    WaitForSDKServiceStart:Sleeping for SDK to start 110 seconds
    WaitForSDKServiceStart:Sleeping for SDK to start 120 seconds
    WaitForSDKServiceStart:Sleeping for SDK to start 130 seconds
    WaitForSDKServiceStart:Sleeping for SDK to start 140 seconds
    WaitForSDKServiceStart:Sleeping for SDK to start 150 seconds
    WaitForSDKServiceStart:Sleeping for SDK to start 160 seconds
    WaitForSDKServiceStart:Sleeping for SDK to start 170 seconds
    WaitForSDKServiceStart: SDK Service connect error, after 3 mins, fail this function
    MSI (s) (74:40) [10:56:20:397]: NOTE: custom action _WaitForSDKServiceStart unexpectedly closed the hInstall handle (type MSIHANDLE) provided to it. The custom action should be fixed to not close that
    handle.
    CustomAction _WaitForSDKServiceStart returned actual error code 1603 (note this may not be 100% accurate if translation happened inside sandbox)
    MSI (s) (74:04) [10:56:40:799]: Executing op: CustomActionRollback(Action=_RollBack_UninstallHealthServicePerfCountersForUpgrade.80B659D9_F758_4E7D_B4FA_E53FC737DCC9,ActionType=3393,Source=BinaryData,Target=InstallHSPerfCounters,CustomActionData=C:\Program
    Files\Microsoft System Center 2012\Service Manager\)
    MSI (s) (74:38) [10:56:40:801]: Invoking remote custom action. DLL: C:\Windows\Installer\MSI62BF.tmp, Entrypoint: InstallHSPerfCounters
    InstallHSPerfCounters: Custom Action Data. C:\Program Files\Microsoft System Center 2012\Service Manager\
    InstallHSPerfCounters: Installing agent perf counters.
    InstallCounters: LoadPerfCounterTextStrings() failed . Error Code: 0x80070057. momv3 "C:\Program Files\Microsoft System Center 2012\Service Manager\HealthServiceCounters.ini"
    InstallPerfCountersHelper: pcCounterInstaller->InstallCounters() for the default counters failed. Error Code: 0x80070057. HealthService
    InstallPerfCountersLib: InstallHealthServicePerfCounters() failed . Error Code: 0x80070057.
    InstallPerfCountersLib: Retry Count : .
    InstallCounters: LoadPerfCounterTextStrings() failed . Error Code: 0x80070057. momv3 "C:\Program Files\Microsoft System Center 2012\Service Manager\MOMConnectorCounters.ini"
    InstallPerfCountersHelper: pcCounterInstaller->InstallCounters() for the default counters failed. Error Code: 0x80070057. MOMConnector
    InstallPerfCountersLib: InstallHealthServicePerfCounters() failed . Error Code: 0x80070057.
    InstallPerfCountersLib: Retry Count : .
    InstallCounters: LoadPerfCounterTextStrings() failed . Error Code: 0x80070057. momv3 "C:\Program Files\Microsoft System Center 2012\Service Manager\HealthServiceCounters.ini"
    InstallPerfCountersHelper: pcCounterInstaller->InstallCounters() for the default counters failed. Error Code: 0x80070057. HealthService
    InstallPerfCountersLib: InstallHealthServicePerfCounters() failed . Error Code: 0x80070057.
    InstallPerfCountersLib: Retry Count : .
    InstallCounters: LoadPerfCounterTextStrings() failed . Error Code: 0x80070057. momv3 "C:\Program Files\Microsoft System Center 2012\Service Manager\MOMConnectorCounters.ini"
    InstallPerfCountersHelper: pcCounterInstaller->InstallCounters() for the default counters failed. Error Code: 0x80070057. MOMConnector
    InstallPerfCountersLib: InstallHealthServicePerfCounters() failed . Error Code: 0x80070057.
    InstallPerfCountersLib: Retry Count : .
    InstallCounters: LoadPerfCounterTextStrings() failed . Error Code: 0x80070057. momv3 "C:\Program Files\Microsoft System Center 2012\Service Manager\HealthServiceCounters.ini"
    InstallPerfCountersHelper: pcCounterInstaller->InstallCounters() for the default counters failed. Error Code: 0x80070057. HealthService
    InstallPerfCountersLib: InstallHealthServicePerfCounters() failed . Error Code: 0x80070057.
    InstallPerfCountersLib: Retry Count : .
    InstallCounters: LoadPerfCounterTextStrings() failed . Error Code: 0x80070057. momv3 "C:\Program Files\Microsoft System Center 2012\Service Manager\MOMConnectorCounters.ini"
    InstallPerfCountersHelper: pcCounterInstaller->InstallCounters() for the default counters failed. Error Code: 0x80070057. MOMConnector
    InstallPerfCountersLib: InstallHealthServicePerfCounters() failed . Error Code: 0x80070057.
    InstallPerfCountersLib: Retry Count : .
    InstallCounters: LoadPerfCounterTextStrings() failed . Error Code: 0x80070057. momv3 "C:\Program Files\Microsoft System Center 2012\Service Manager\HealthServiceCounters.ini"
    InstallPerfCountersHelper: pcCounterInstaller->InstallCounters() for the default counters failed. Error Code: 0x80070057. HealthService
    InstallPerfCountersLib: InstallHealthServicePerfCounters() failed . Error Code: 0x80070057.
    InstallPerfCountersLib: Retry Count : .
    InstallCounters: LoadPerfCounterTextStrings() failed . Error Code: 0x80070057. momv3 "C:\Program Files\Microsoft System Center 2012\Service Manager\MOMConnectorCounters.ini"
    InstallPerfCountersHelper: pcCounterInstaller->InstallCounters() for the default counters failed. Error Code: 0x80070057. MOMConnector
    InstallPerfCountersLib: InstallHealthServicePerfCounters() failed . Error Code: 0x80070057.
    InstallPerfCountersLib: Retry Count : .
    InstallCounters: LoadPerfCounterTextStrings() failed . Error Code: 0x80070057. momv3 "C:\Program Files\Microsoft System Center 2012\Service Manager\HealthServiceCounters.ini"
    InstallPerfCountersHelper: pcCounterInstaller->InstallCounters() for the default counters failed. Error Code: 0x80070057. HealthService
    InstallPerfCountersLib: InstallHealthServicePerfCounters() failed . Error Code: 0x80070057.
    InstallPerfCountersLib: Retry Count : .
    InstallCounters: LoadPerfCounterTextStrings() failed . Error Code: 0x80070057. momv3 "C:\Program Files\Microsoft System Center 2012\Service Manager\MOMConnectorCounters.ini"
    InstallPerfCountersHelper: pcCounterInstaller->InstallCounters() for the default counters failed. Error Code: 0x80070057. MOMConnector
    InstallPerfCountersLib: InstallHealthServicePerfCounters() failed . Error Code: 0x80070057.
    InstallPerfCountersLib: Retry Count : .
    InstallCounters: LoadPerfCounterTextStrings() failed . Error Code: 0x80070057. momv3 "C:\Program Files\Microsoft System Center 2012\Service Manager\HealthServiceCounters.ini"
    InstallPerfCountersHelper: pcCounterInstaller->InstallCounters() for the default counters failed. Error Code: 0x80070057. HealthService
    InstallPerfCountersLib: InstallHealthServicePerfCounters() failed . Error Code: 0x80070057.
    InstallPerfCountersLib: Retry Count : .
    InstallCounters: LoadPerfCounterTextStrings() failed . Error Code: 0x80070057. momv3 "C:\Program Files\Microsoft System Center 2012\Service Manager\MOMConnectorCounters.ini"
    InstallPerfCountersHelper: pcCounterInstaller->InstallCounters() for the default counters failed. Error Code: 0x80070057. MOMConnector
    InstallPerfCountersLib: InstallHealthServicePerfCounters() failed . Error Code: 0x80070057.
    InstallPerfCountersLib: Retry Count : .
    InstallHSPerfCounters: Failed to install agent perf counters. Error Code: 0x80070057.
    MSI (s) (74:04) [10:57:10:844]: I/O on thread 2752 could not be cancelled. Error: 1168
    MSI (s) (74:04) [10:57:10:844]: I/O on thread 4796 could not be cancelled. Error: 1168
    MSI (s) (74:04) [10:57:10:844]: I/O on thread 4928 could not be cancelled. Error: 1168
    MSI (s) (74:04) [10:57:10:845]: I/O on thread 4612 could not be cancelled. Error: 1168
    MSI (s) (74:04) [10:57:10:845]: I/O on thread 884 could not be cancelled. Error: 1168
    MSI (s) (74:04) [10:57:10:845]: I/O on thread 2600 could not be cancelled. Error: 1168
    MSI (s) (74:04) [10:57:10:845]: I/O on thread 1884 could not be cancelled. Error: 1168
    MSI (s) (74:04) [10:57:10:845]: I/O on thread 4872 could not be cancelled. Error: 1168
    MSI (s) (74:04) [10:57:10:845]: I/O on thread 3084 could not be cancelled. Error: 1168
    MSI (s) (74:04) [10:57:10:845]: I/O on thread 4920 could not be cancelled. Error: 1168
    MSI (s) (74!E0) [10:57:10:846]: Product: Microsoft System Center 2012 - Service Manager -- The installer has encountered an unexpected error installing this package. This may indicate a problem with
    this package. The error code is 25211. The arguments are: -2147024809, The parameter is incorrect.,
    The installer has encountered an unexpected error installing this package. This may indicate a problem with this package. The error code is 25211. The arguments are: -2147024809, The parameter is incorrect.,
    CustomAction _RollBack_UninstallHealthServicePerfCountersForUpgrade.80B659D9_F758_4E7D_B4FA_E53FC737DCC9 returned actual error code 1603 but will be translated to success due to continue marking
    MSI (s) (74:04) [10:57:17:154]: Note: 1: 1708
    MSI (s) (74:04) [10:57:17:154]: Product: Microsoft System Center 2012 - Service Manager -- Installation failed.
    MSI (s) (74:04) [10:57:17:155]: Windows Installer installed the product. Product Name: Microsoft System Center 2012 - Service Manager. Product Version: 7.5.2905.0. Product Language: 0. Manufacturer:
    Microsoft Corporation. Installation success or error status: 1603.
    Full log file:
    https://skydrive.live.com/redir?resid=F723C571E9E6D51F!1414&authkey=!ACisfvqIpGO_i7A

    Hello Christopher,
    I have recently worked in a case that had mostly the same errors:
    InstallHSPerfCounters: Installing agent perf counters.
    InstallCounters: LoadPerfCounterTextStrings() failed . Error Code: 0x80070057. momv3 "C:\Program Files\Microsoft System Center\Service Manager\HealthServiceCounters.ini"
    InstallPerfCountersHelper: pcCounterInstaller->InstallCounters() for the default counters failed. Error Code: 0x80070057. HealthService
    InstallPerfCountersLib: InstallHealthServicePerfCounters() failed . Error Code: 0x80070057.
    InstallPerfCountersLib: Retry Count : .
    InstallCounters: LoadPerfCounterTextStrings() failed . Error Code: 0x80070057. momv3 "C:\Program Files\Microsoft System Center\Service Manager\MOMConnectorCounters.ini"
    InstallPerfCountersHelper: pcCounterInstaller->InstallCounters() for the default counters failed. Error Code: 0x80070057. MOMConnector
    InstallPerfCountersLib: InstallHealthServicePerfCounters() failed . Error Code: 0x80070057.
    InstallPerfCountersLib: Retry Count : .
    InstallCounters: LoadPerfCounterTextStrings() failed . Error Code: 0x80070057. momv3 "C:\Program Files\Microsoft System Center\Service Manager\HealthServiceCounters.ini"
    InstallPerfCountersHelper: pcCounterInstaller->InstallCounters() for the default counters failed. Error Code: 0x80070057. HealthService
    InstallPerfCountersLib: InstallHealthServicePerfCounters() failed . Error Code: 0x80070057.
    InstallPerfCountersLib: Retry Count : .
    InstallCounters: LoadPerfCounterTextStrings() failed . Error Code: 0x80070057. momv3 "C:\Program Files\Microsoft System Center\Service Manager\MOMConnectorCounters.ini"
    InstallPerfCountersHelper: pcCounterInstaller->InstallCounters() for the default counters failed. Error Code: 0x80070057. MOMConnector
    InstallPerfCountersLib: InstallHealthServicePerfCounters() failed . Error Code: 0x80070057.
    InstallPerfCountersLib: Retry Count : .
    InstallCounters: LoadPerfCounterTextStrings() failed . Error Code: 0x80070057. momv3 "C:\Program Files\Microsoft System Center\Service Manager\HealthServiceCounters.ini"
    InstallPerfCountersHelper: pcCounterInstaller->InstallCounters() for the default counters failed. Error Code: 0x80070057. HealthService
    InstallPerfCountersLib: InstallHealthServicePerfCounters() failed . Error Code: 0x80070057.
    InstallPerfCountersLib: Retry Count : .
    InstallCounters: LoadPerfCounterTextStrings() failed . Error Code: 0x80070057. momv3 "C:\Program Files\Microsoft System Center\Service Manager\MOMConnectorCounters.ini"
    InstallPerfCountersHelper: pcCounterInstaller->InstallCounters() for the default counters failed. Error Code: 0x80070057. MOMConnector
    InstallPerfCountersLib: InstallHealthServicePerfCounters() failed . Error Code: 0x80070057.
    InstallPerfCountersLib: Retry Count : .
    InstallCounters: LoadPerfCounterTextStrings() failed . Error Code: 0x80070057. momv3 "C:\Program Files\Microsoft System Center\Service Manager\HealthServiceCounters.ini"
    InstallPerfCountersHelper: pcCounterInstaller->InstallCounters() for the default counters failed. Error Code: 0x80070057. HealthService
    InstallPerfCountersLib: InstallHealthServicePerfCounters() failed . Error Code: 0x80070057.
    InstallPerfCountersLib: Retry Count : .
    InstallCounters: LoadPerfCounterTextStrings() failed . Error Code: 0x80070057. momv3 "C:\Program Files\Microsoft System Center\Service Manager\MOMConnectorCounters.ini"
    InstallPerfCountersHelper: pcCounterInstaller->InstallCounters() for the default counters failed. Error Code: 0x80070057. MOMConnector
    InstallPerfCountersLib: InstallHealthServicePerfCounters() failed . Error Code: 0x80070057.
    InstallPerfCountersLib: Retry Count : .
    InstallCounters: LoadPerfCounterTextStrings() failed . Error Code: 0x80070057. momv3 "C:\Program Files\Microsoft System Center\Service Manager\HealthServiceCounters.ini"
    InstallPerfCountersHelper: pcCounterInstaller->InstallCounters() for the default counters failed. Error Code: 0x80070057. HealthService
    InstallPerfCountersLib: InstallHealthServicePerfCounters() failed . Error Code: 0x80070057.
    InstallPerfCountersLib: Retry Count : .
    InstallCounters: LoadPerfCounterTextStrings() failed . Error Code: 0x80070057. momv3 "C:\Program Files\Microsoft System Center\Service Manager\MOMConnectorCounters.ini"
    InstallPerfCountersHelper: pcCounterInstaller->InstallCounters() for the default counters failed. Error Code: 0x80070057. MOMConnector
    InstallPerfCountersLib: InstallHealthServicePerfCounters() failed . Error Code: 0x80070057.
    InstallPerfCountersLib: Retry Count : .
    InstallCounters: LoadPerfCounterTextStrings() failed . Error Code: 0x80070057. momv3 "C:\Program Files\Microsoft System Center\Service Manager\HealthServiceCounters.ini"
    InstallPerfCountersHelper: pcCounterInstaller->InstallCounters() for the default counters failed. Error Code: 0x80070057. HealthService
    InstallPerfCountersLib: InstallHealthServicePerfCounters() failed . Error Code: 0x80070057.
    InstallPerfCountersLib: Retry Count : .
    InstallCounters: LoadPerfCounterTextStrings() failed . Error Code: 0x80070057. momv3 "C:\Program Files\Microsoft System Center\Service Manager\MOMConnectorCounters.ini"
    InstallPerfCountersHelper: pcCounterInstaller->InstallCounters() for the default counters failed. Error Code: 0x80070057. MOMConnector
    InstallPerfCountersLib: InstallHealthServicePerfCounters() failed . Error Code: 0x80070057.
    InstallPerfCountersLib: Retry Count : .
    InstallHSPerfCounters: Failed to install agent perf counters. Error Code: 0x80070057.
    MSI (s) (A8:D4) [10:29:51:586]: I/O on thread 8152 could not be cancelled. Error: 1168
    MSI (s) (A8:D4) [10:29:51:586]: I/O on thread 9580 could not be cancelled. Error: 1168
    MSI (s) (A8:D4) [10:29:51:586]: I/O on thread 6008 could not be cancelled. Error: 1168
    MSI (s) (A8:D4) [10:29:51:586]: I/O on thread 2112 could not be cancelled. Error: 1168
    MSI (s) (A8:D4) [10:29:51:586]: I/O on thread 8252 could not be cancelled. Error: 1168
    MSI (s) (A8:D4) [10:29:51:586]: I/O on thread 12504 could not be cancelled. Error: 1168
    MSI (s) (A8:D4) [10:29:51:586]: I/O on thread 9548 could not be cancelled. Error: 1168
    MSI (s) (A8:D4) [10:29:51:586]: I/O on thread 11464 could not be cancelled. Error: 1168
    MSI (s) (A8:D4) [10:29:51:587]: I/O on thread 10616 could not be cancelled. Error: 1168
    MSI (s) (A8:D4) [10:29:51:587]: I/O on thread 8120 could not be cancelled. Error: 1168
    MSI (s) (A8:D4) [10:29:51:587]: I/O on thread 2424 could not be cancelled. Error: 1168
    MSI (s) (A8!D4) [10:29:51:587]: Product: Microsoft System Center 2012 R2 Service Manager -- The installer has encountered an unexpected error installing this package. This may indicate a problem with this package. The error code is 25211. The arguments are:
    -2147024809, The parameter is incorrect.,
    The installer has encountered an unexpected error installing this package. This may indicate a problem with this package. The error code is 25211. The arguments are: -2147024809, The parameter is incorrect.,
    CustomAction _RollBack_UninstallHealthServicePerfCountersForUpgrade.80B659D9_F758_4E7D_B4FA_E53FC737DCC9 returned actual error code 1603 but will be translated to success due to continue marking
    MSI (s) (A8:3C) [10:29:51:599]: Executing op: ActionStart(Name=_StopNamedServices_HealthService.80B659D9_F758_4E7D_B4FA_E53FC737DCC9,Description=Stopping Health services,)
    MSI (s) (A8:3C) [10:29:51:603]: Executing op: ActionStart(Name=StopServices,Description=Stopping services,Template=[1])
    MSI (s) (A8:3C) [10:29:51:605]: Executing op: ServiceControl(,Name=W3SVC,Action=1,,)
    MSI (s) (A8:3C) [10:29:52:621]: Executing op: ActionStart(Name=ProcessComponents,Description=Updating component registration,).
    - I was able to resolve it using the command  line LOTCTR /R
    - And restarting the IIS service using the command line tool IISRESET
    - After this command was successfully applied I have tried to install the Service Manager Portal without any errors.
    http://technet.microsoft.com/en-us/library/bb490926.aspx
    http://technet.microsoft.com/en-us/library/hh875560.aspx
    http://support.microsoft.com/kb/300956
    https://blogs.technet.com/b/yongrhee/archive/2009/10/06/how-to-rebuild-performance-counters-on-windows-vista-server2008-7-server2008r2.aspx
    Thank you very much
    Renato Pacheco

  • GC install fails on OMS Configuration step with NodeManager

    I'm trying to install OEM Grid Control and I'm having some problems getting past the OMS Configuration step in the installation. I'm not very familiar with Oracle products. I've completed all the configuration steps listed in the documentation and in order to resolve an earlier problem, I deleted the Keynectis and Telesec certificates from the cacerts java keystore. NodeManager is being run as a service, though I think the configuration process is launching a new instance because it can't connect to the service. I've also been unable to connect to the service through the WLST nmConnect function, though it's possible my parameters are incorrect. If the only problem is that GCDomain is not registered in the nodemanager.domains file, I'm not sure what I'm doing wrong, because I put it in the nodemanager.domains file located at C:\Oracle\Middleware\wlserver_10.3\common\nodemanager:
    #Domains and directories created by Configuration Wizard
    #Fri Apr 22 15:23:16 EDT 2011
    wl_server=C\:\\Oracle\\Middleware\\wlserver_10.3\\samples\\domains\\wl_server
    medrec-spring=C\:\\Oracle\\Middleware\\wlserver_10.3\\samples\\domains\\medrec-spring
    GCDomain=C\:\\Oracle\\gc_inst\\user_projects\\domains\\GCDomain
    medrec=C\:\\Oracle\\Middleware\\wlserver_10.3\\samples\\domains\\medrec
    note - the file paths are correct and use escaped slashes where appropriate, but this message board system is turning the last double backslash into a line break. I can't find any html solution that works, so just take my word for it
    I restarted NodeManager after making the change as well. Any help would be appreciated. Thanks.
    Details:
    Machine - Windows Server 2008 x64
    DB - 11gR2
    WLS - 10.3.2
    GC - 11.1.0.1
    Install Log:
    FINE: Connecting to Node Manager ... Apr 22, 2011 3:23:19 PM oracle.sysman.omsca.util.ProcessOutputReader run
    FINE: <Apr 22, 2011 3:23:19 PM EDT> <Notice> <Security> <BEA-090898> <Ignoring the trusted CA certificate "CN=KEYNECTIS ROOT CA,OU=ROOT,O=KEYNECTIS,C=FR". The loading of the trusted certificate list raised a certificate parsing exception PKIX: Unsupported OID in the AlgorithmIdentifier object: 1.2.840.113549.1.1.11.> Apr 22, 2011 3:23:19 PM oracle.sysman.omsca.util.ProcessOutputReader run
    FINE: <Apr 22, 2011 3:23:19 PM EDT> <Notice> <Security> <BEA-090898> <Ignoring the trusted CA certificate "CN=T-TeleSec GlobalRoot Class 3,OU=T-Systems Trust Center,O=T-Systems Enterprise Services GmbH,C=DE". The loading of the trusted certificate list raised a certificate parsing exception PKIX: Unsupported OID in the AlgorithmIdentifier object: 1.2.840.113549.1.1.11.> Apr 22, 2011 3:23:19 PM oracle.sysman.omsca.util.ProcessOutputReader run
    FINE: <Apr 22, 2011 3:23:19 PM EDT> <Notice> <Security> <BEA-090898> <Ignoring the trusted CA certificate "CN=T-TeleSec GlobalRoot Class 2,OU=T-Systems Trust Center,O=T-Systems Enterprise Services GmbH,C=DE". The loading of the trusted certificate list raised a certificate parsing exception PKIX: Unsupported OID in the AlgorithmIdentifier object: 1.2.840.113549.1.1.11.> Apr 22, 2011 3:23:20 PM oracle.sysman.omsca.util.ProcessOutputReader run
    FINE: This Exception occurred at Fri Apr 22 15:23:20 EDT 2011. Apr 22, 2011 3:23:20 PM oracle.sysman.omsca.util.ProcessOutputReader run
    FINE: weblogic.nodemanager.NMConnectException: Connection refused: connect. Could not connect to NodeManager. Check that it is running at win2008x64-2:7,401. Apr 22, 2011 3:23:20 PM oracle.sysman.omsca.util.ProcessOutputReader run
    FINE:      at java.net.PlainSocketImpl.socketConnect(Native Method) Apr 22, 2011 3:23:20 PM oracle.sysman.omsca.util.ProcessOutputReader run
    FINE:      at java.net.PlainSocketImpl.doConnect(PlainSocketImpl.java:333) Apr 22, 2011 3:23:20 PM oracle.sysman.omsca.util.ProcessOutputReader run
    FINE:      at java.net.PlainSocketImpl.connectToAddress(PlainSocketImpl.java:195) Apr 22, 2011 3:23:20 PM oracle.sysman.omsca.util.ProcessOutputReader run
    FINE:      at java.net.PlainSocketImpl.connect(PlainSocketImpl.java:182) Apr 22, 2011 3:23:20 PM oracle.sysman.omsca.util.ProcessOutputReader run
    FINE:      at java.net.SocksSocketImpl.connect(SocksSocketImpl.java:366) Apr 22, 2011 3:23:20 PM oracle.sysman.omsca.util.ProcessOutputReader run
    FINE:      at java.net.Socket.connect(Socket.java:525) Apr 22, 2011 3:23:20 PM oracle.sysman.omsca.util.ProcessOutputReader run
    FINE:      at weblogic.nodemanager.client.SSLClient.createSocket(SSLClient.java:38) Apr 22, 2011 3:23:20 PM oracle.sysman.omsca.util.ProcessOutputReader run
    FINE:      at weblogic.nodemanager.client.NMServerClient.connect(NMServerClient.java:227) Apr 22, 2011 3:23:20 PM oracle.sysman.omsca.util.ProcessOutputReader run
    FINE:      at weblogic.nodemanager.client.NMServerClient.checkConnected(NMServerClient.java:199) Apr 22, 2011 3:23:20 PM oracle.sysman.omsca.util.ProcessOutputReader run
    FINE:      at weblogic.nodemanager.client.NMServerClient.checkConnected(NMServerClient.java:205) Apr 22, 2011 3:23:20 PM oracle.sysman.omsca.util.ProcessOutputReader run
    FINE:      at weblogic.nodemanager.client.NMServerClient.getVersion(NMServerClient.java:52) Apr 22, 2011 3:23:20 PM oracle.sysman.omsca.util.ProcessOutputReader run
    FINE:      at weblogic.management.scripting.NodeManagerService.verifyConnection(NodeManagerService.java:175) Apr 22, 2011 3:23:20 PM oracle.sysman.omsca.util.ProcessOutputReader run
    FINE:      at weblogic.management.scripting.NodeManagerService.nmConnect(NodeManagerService.java:168) Apr 22, 2011 3:23:20 PM oracle.sysman.omsca.util.ProcessOutputReader run
    FINE:      at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method) Apr 22, 2011 3:23:20 PM oracle.sysman.omsca.util.ProcessOutputReader run
    FINE:      at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39) Apr 22, 2011 3:23:20 PM oracle.sysman.omsca.util.ProcessOutputReader run
    FINE:      at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25) Apr 22, 2011 3:23:20 PM oracle.sysman.omsca.util.ProcessOutputReader run
    FINE:      at java.lang.reflect.Method.invoke(Method.java:597) Apr 22, 2011 3:23:20 PM oracle.sysman.omsca.util.ProcessOutputReader run
    FINE:      at org.python.core.PyReflectedFunction.__call__(Unknown Source) Apr 22, 2011 3:23:20 PM oracle.sysman.omsca.util.ProcessOutputReader run
    FINE:      at org.python.core.PyMethod.__call__(Unknown Source) Apr 22, 2011 3:23:20 PM oracle.sysman.omsca.util.ProcessOutputReader run
    FINE:      at org.python.core.PyObject.__call__(Unknown Source) Apr 22, 2011 3:23:20 PM oracle.sysman.omsca.util.ProcessOutputReader run
    FINE:      at org.python.core.PyObject.invoke(Unknown Source) Apr 22, 2011 3:23:20 PM oracle.sysman.omsca.util.ProcessOutputReader run
    FINE:      at org.python.pycode._pyx2.nmConnect$3(<iostream>:118) Apr 22, 2011 3:23:20 PM oracle.sysman.omsca.util.ProcessOutputReader run
    FINE:      at org.python.pycode._pyx2.call_function(<iostream>) Apr 22, 2011 3:23:20 PM oracle.sysman.omsca.util.ProcessOutputReader run
    FINE:      at org.python.core.PyTableCode.call(Unknown Source) Apr 22, 2011 3:23:20 PM oracle.sysman.omsca.util.ProcessOutputReader run
    FINE:      at org.python.core.PyTableCode.call(Unknown Source) Apr 22, 2011 3:23:20 PM oracle.sysman.omsca.util.ProcessOutputReader run
    FINE:      at org.python.core.PyFunction.__call__(Unknown Source) Apr 22, 2011 3:23:20 PM oracle.sysman.omsca.util.ProcessOutputReader run
    FINE:      at org.python.core.PyObject.__call__(Unknown Source) Apr 22, 2011 3:23:20 PM oracle.sysman.omsca.util.ProcessOutputReader run
    FINE:      at org.python.pycode._pyx41.startNM$1(C:\Oracle\Middleware\oms11g\sysman\omsca\scripts\wls\start_server.py:20) Apr 22, 2011 3:23:20 PM oracle.sysman.omsca.util.ProcessOutputReader run
    FINE:      at org.python.pycode._pyx41.call_function(C:\Oracle\Middleware\oms11g\sysman\omsca\scripts\wls\start_server.py) Apr 22, 2011 3:23:20 PM oracle.sysman.omsca.util.ProcessOutputReader run
    FINE:      at org.python.core.PyTableCode.call(Unknown Source) Apr 22, 2011 3:23:20 PM oracle.sysman.omsca.util.ProcessOutputReader run
    FINE:      at org.python.core.PyTableCode.call(Unknown Source) Apr 22, 2011 3:23:20 PM oracle.sysman.omsca.util.ProcessOutputReader run
    FINE:      at org.python.core.PyFunction.__call__(Unknown Source) Apr 22, 2011 3:23:20 PM oracle.sysman.omsca.util.ProcessOutputReader run
    FINE:      at org.python.pycode._pyx39.f$0(C:\Oracle\Middleware\oms11g\sysman\omsca\scripts\wls\create_em_infra.py:74) Apr 22, 2011 3:23:20 PM oracle.sysman.omsca.util.ProcessOutputReader run
    FINE:      at org.python.pycode._pyx39.call_function(C:\Oracle\Middleware\oms11g\sysman\omsca\scripts\wls\create_em_infra.py) Apr 22, 2011 3:23:20 PM oracle.sysman.omsca.util.ProcessOutputReader run
    FINE:      at org.python.core.PyTableCode.call(Unknown Source) Apr 22, 2011 3:23:20 PM oracle.sysman.omsca.util.ProcessOutputReader run
    FINE:      at org.python.core.PyCode.call(Unknown Source) Apr 22, 2011 3:23:20 PM oracle.sysman.omsca.util.ProcessOutputReader run
    FINE:      at org.python.core.Py.runCode(Unknown Source) Apr 22, 2011 3:23:20 PM oracle.sysman.omsca.util.ProcessOutputReader run
    FINE:      at org.python.util.PythonInterpreter.execfile(Unknown Source) Apr 22, 2011 3:23:20 PM oracle.sysman.omsca.util.ProcessOutputReader run
    FINE:      at weblogic.management.scripting.WLST.main(WLST.java:131) Apr 22, 2011 3:23:20 PM oracle.sysman.omsca.util.ProcessOutputReader run
    FINE:      at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method) Apr 22, 2011 3:23:20 PM oracle.sysman.omsca.util.ProcessOutputReader run
    FINE:      at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39) Apr 22, 2011 3:23:20 PM oracle.sysman.omsca.util.ProcessOutputReader run
    FINE:      at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25) Apr 22, 2011 3:23:20 PM oracle.sysman.omsca.util.ProcessOutputReader run
    FINE:      at java.lang.reflect.Method.invoke(Method.java:597) Apr 22, 2011 3:23:20 PM oracle.sysman.omsca.util.ProcessOutputReader run
    FINE:      at weblogic.WLST.main(WLST.java:29) Apr 22, 2011 3:23:20 PM oracle.sysman.omsca.util.ProcessOutputReader run
    FINE: Fri Apr 22 15:23:20 EDT 2011 Apr 22, 2011 3:23:20 PM oracle.sysman.omsca.util.ProcessOutputReader run
    FINE: Node Manager is down starting it Apr 22, 2011 3:23:20 PM oracle.sysman.omsca.util.ProcessOutputReader run
    FINE: Not connected to Node Manager Apr 22, 2011 3:23:20 PM oracle.sysman.omsca.util.ProcessOutputReader run
    FINE: Launching NodeManager ...
    Apr 22, 2011 3:23:20 PM oracle.sysman.omsca.util.ProcessOutputReader run
    FINE: Properties: {ListenAddress=win2008x64-2,ListenPort=7401,NodeManagerHome=C:\Oracle\MIDDLE~1\WLSERV~1.3\common\emnodemanager20110422152239,StartScriptEnabled=true,StartScriptName=startEMServer.cmd,}
    Apr 22, 2011 3:23:20 PM oracle.sysman.omsca.util.ProcessOutputReader run
    FINE: Command: C:\Oracle\MIDDLE~1\JROCKI~1.5-3\jre\bin\javaw.exe -classpath "C:\Oracle\MIDDLE~1\JROCKI~1.5-3\jre\lib\rt.jar;C:\Oracle\MIDDLE~1\JROCKI~1.5-3\jre\lib\i18n.jar;C:\Oracle\MIDDLE~1\patch_wls1032\profiles\default\sys_manifest_classpath\weblogic_patch.jar;C:\Oracle\MIDDLE~1\patch_oepe1032\profiles\default\sys_manifest_classpath\weblogic_patch.jar;C:\Oracle\MIDDLE~1\JROCKI~1.5-3\lib\tools.jar;C:\Oracle\MIDDLE~1\utils\config\10.3\config-launch.jar;C:\Oracle\MIDDLE~1\WLSERV~1.3\server\lib\weblogic_sp.jar;C:\Oracle\MIDDLE~1\WLSERV~1.3\server\lib\weblogic.jar;C:\Oracle\MIDDLE~1\modules\features\weblogic.server.modules_10.3.2.0.jar;C:\Oracle\MIDDLE~1\WLSERV~1.3\server\lib\webservices.jar;C:\Oracle\MIDDLE~1\modules\ORGAPA~1.0\lib\ant-all.jar;C:\Oracle\MIDDLE~1\modules\NETSFA~1.0_1\lib\ant-contrib.jar;C:\Oracle\Middleware\oms11g\sysman\jlib\emConfig.jar;C:\Oracle\MIDDLE~1\ORACLE~1\modules\oracle.jrf_11.1.1\jrf-api.jar;C:\Oracle\MIDDLE~1\ORACLE~1\common\wlst\resources\jrf-wlst.jar;C:\Oracle\MIDDLE~1\ORACLE~1\modules\oracle.odl_11.1.1\ojdl.jar;C:\Oracle\MIDDLE~1\ORACLE~1\modules\oracle.odl_11.1.1\ojdl2.jar;C:\Oracle\MIDDLE~1\ORACLE~1\modules\oracle.dms_11.1.1\dms.jar;C:\Oracle\MIDDLE~1\ORACLE~1\modules\oracle.dconfig-infra_11.1.1.jar;C:\Oracle\MIDDLE~1\ORACLE~1\modules\oracle.fabriccommon_11.1.1\fabric-common.jar;C:\Oracle\MIDDLE~1\ORACLE~1\modules\oracle.xdk_11.1.0\xmlparserv2.jar;C:\Oracle\MIDDLE~1\ORACLE~1\modules\oracle.xdk_11.1.0\xml.jar;C:\Oracle\MIDDLE~1\ORACLE~1\modules\oracle.wsm.common_11.1.1\wsm-pmlib.jar;C:\Oracle\MIDDLE~1\ORACLE~1\modules\oracle.wsm.common_11.1.1\wsm-policy-core.jar;C:\Oracle\MIDDLE~1\ORACLE~1\modules\oracle.wsm.common_11.1.1\wsm-secpol.jar;C:\Oracle\MIDDLE~1\ORACLE~1\modules\oracle.wsm.common_11.1.1\wsm-dependencies.jar;C:\Oracle\MIDDLE~1\ORACLE~1\modules\oracle.wsm.policies_11.1.1\wsm-seed-policies.jar;C:\Oracle\MIDDLE~1\ORACLE~1\modules\oracle.webservices_11.1.1\orawsdl.jar;C:\Oracle\MIDDLE~1\ORACLE~1\modules\oracle.webservices_11.1.1\mdds.jar;C:\Oracle\MIDDLE~1\ORACLE~1\modules\oracle.webservices_11.1.1\ws_confmbeans.jar;C:\Oracle\MIDDLE~1\ORACLE~1\modules\org.apache.commons.digester_1.7.jar;C:\Oracle\MIDDLE~1\ORACLE~1\..\modules\javax.xml.bind_2.1.1.jar;C:\Oracle\MIDDLE~1\ORACLE~1\..\modules\javax.activation_1.1.jar;C:\Oracle\MIDDLE~1\ORACLE~1\..\modules\javax.xml.stream_1.1.1.0.jar;C:\Oracle\MIDDLE~1\ORACLE~1\modules\oracle.http_client_11.1.1.jar;C:\Oracle\MIDDLE~1\ORACLE~1\modules\oracle.jmx_11.1.1\jmxframework.jar;C:\Oracle\MIDDLE~1\ORACLE~1\modules\oracle.jmx_11.1.1\jmxspi.jar;C:\Oracle\MIDDLE~1\ORACLE~1\modules\oracle.adf.dconfigbeans_11.1.1.jar;C:\Oracle\MIDDLE~1\ORACLE~1\modules\oracle.adf.share.ca_11.1.1\adf-share-base.jar;C:\Oracle\MIDDLE~1\ORACLE~1\modules\oracle.adf.share.ca_11.1.1\adf-share-ca.jar;C:\Oracle\MIDDLE~1\ORACLE~1\modules\oracle.adf.share_11.1.1\adflogginghandler.jar;C:\Oracle\MIDDLE~1\ORACLE~1\modules\oracle.adf.share_11.1.1\adfsharembean.jar;C:\Oracle\MIDDLE~1\ORACLE~1\modules\oracle.adf.share_11.1.1\commons-el.jar;C:\Oracle\MIDDLE~1\ORACLE~1\modules\oracle.adf.share_11.1.1\jsp-el-api.jar;C:\Oracle\MIDDLE~1\ORACLE~1\modules\oracle.adf.share_11.1.1\oracle-el.jar;C:\Oracle\MIDDLE~1\ORACLE~1\common\wlst\resources\auditwlst.jar;C:\Oracle\MIDDLE~1\ORACLE~1\common\wlst\resources\sslconfigwlst.jar;C:\Oracle\MIDDLE~1\ORACLE~1\common\wlst\resources\oamap_help.jar;C:\Oracle\MIDDLE~1\ORACLE~1\common\wlst\resources\ossoiap_help.jar;C:\Oracle\MIDDLE~1\ORACLE~1\common\wlst\resources\jps-wlst.jar;C:\Oracle\MIDDLE~1\ORACLE~1\modules\oracle.auditprovider_11.1.1\jps-wls-auditprovider.jar;C:\Oracle\MIDDLE~1\ORACLE~1\modules\oracle.jps_11.1.1\jps-manifest.jar;C:\Oracle\MIDDLE~1\ORACLE~1\modules\oracle.jps_11.1.1\jps-mbeans.jar;C:\Oracle\MIDDLE~1\ORACLE~1\modules\oracle.jps_11.1.1\jps-upgrade.jar;C:\Oracle\MIDDLE~1\ORACLE~1\modules\oracle.jps_11.1.1\jps-patching.jar;C:\Oracle\MIDDLE~1\ORACLE~1\common\wlst\lib\ADF-SH~1.JAR;C:\Oracle\MIDDLE~1\ORACLE~1\common\wlst\lib\mdswlst.jar;C:\Oracle\MIDDLE~1\ORACLE~1\common\wlst\RESOUR~1\AUDITW~1.JAR;C:\Oracle\MIDDLE~1\ORACLE~1\common\wlst\RESOUR~1\jps-wlst.jar;C:\Oracle\MIDDLE~1\ORACLE~1\common\wlst\RESOUR~1\jrf-wlst.jar;C:\Oracle\MIDDLE~1\ORACLE~1\common\wlst\RESOUR~1\OAMAP_~1.JAR;C:\Oracle\MIDDLE~1\ORACLE~1\common\wlst\RESOUR~1\OAMAUT~1.JAR;C:\Oracle\MIDDLE~1\ORACLE~1\common\wlst\RESOUR~1\ossoiap.jar;C:\Oracle\MIDDLE~1\ORACLE~1\common\wlst\RESOUR~1\OSSOIA~1.JAR;C:\Oracle\MIDDLE~1\ORACLE~1\common\wlst\RESOUR~1\SSLCON~1.JAR;C:\Oracle\MIDDLE~1\ORACLE~1\common\wlst\RESOUR~1\wsm-wlst.jar;C:\Oracle\MIDDLE~1\WLSERV~1.3\common\eval\pointbase\lib\pbembedded57.jar;C:\Oracle\MIDDLE~1\WLSERV~1.3\common\eval\pointbase\lib\pbclient57.jar;C:\Oracle\MIDDLE~1\WLSERV~1.3\common\eval\pointbase\lib\pbtools57.jar" weblogic.NodeManager "-v"
    Apr 22, 2011 3:23:21 PM oracle.sysman.omsca.util.ProcessOutputReader run
    FINE: NMProcess: <Apr 22, 2011 3:23:21 PM> <INFO> <Loading domains file: C:\Oracle\MIDDLE~1\WLSERV~1.3\common\emnodemanager20110422152239\nodemanager.domains> Apr 22, 2011 3:23:21 PM oracle.sysman.omsca.util.ProcessOutputReader run
    FINE: NMProcess: Apr 22, 2011 3:23:21 PM weblogic.nodemanager.server.NMServerConfig initDomainsMap Apr 22, 2011 3:23:21 PM oracle.sysman.omsca.util.ProcessOutputReader run
    FINE: NMProcess: INFO: Loading domains file: C:\Oracle\MIDDLE~1\WLSERV~1.3\common\emnodemanager20110422152239\nodemanager.domains Apr 22, 2011 3:23:21 PM oracle.sysman.omsca.util.ProcessOutputReader run
    FINE: NMProcess: <Apr 22, 2011 3:23:21 PM> <WARNING> <Domains file not found: C:\Oracle\MIDDLE~1\WLSERV~1.3\common\emnodemanager20110422152239\nodemanager.domains> Apr 22, 2011 3:23:21 PM oracle.sysman.omsca.util.ProcessOutputReader run
    FINE: NMProcess: Apr 22, 2011 3:23:21 PM weblogic.nodemanager.server.NMServerConfig initDomainsMap Apr 22, 2011 3:23:21 PM oracle.sysman.omsca.util.ProcessOutputReader run
    FINE: NMProcess: WARNING: Domains file not found: C:\Oracle\MIDDLE~1\WLSERV~1.3\common\emnodemanager20110422152239\nodemanager.domains Apr 22, 2011 3:23:22 PM oracle.sysman.omsca.util.ProcessOutputReader run
    FINE: NMProcess: <Apr 22, 2011 3:23:22 PM> <INFO> <Loading identity key store: FileName=C:/Oracle/MIDDLE~1/WLSERV~1.3/server\lib\DemoIdentity.jks, Type=jks, PassPhraseUsed=true> Apr 22, 2011 3:23:22 PM oracle.sysman.omsca.util.ProcessOutputReader run
    FINE: NMProcess: Apr 22, 2011 3:23:22 PM weblogic.nodemanager.server.SSLConfig loadKeyStoreConfig Apr 22, 2011 3:23:22 PM oracle.sysman.omsca.util.ProcessOutputReader run
    FINE: NMProcess: INFO: Loading identity key store: FileName=C:/Oracle/MIDDLE~1/WLSERV~1.3/server\lib\DemoIdentity.jks, Type=jks, PassPhraseUsed=true Apr 22, 2011 3:23:23 PM oracle.sysman.omsca.util.ProcessOutputReader run
    FINE: NMProcess: <Apr 22, 2011 3:23:23 PM> <WARNING> <Node manager configuration properties file 'C:\Oracle\MIDDLE~1\WLSERV~1.3\common\emnodemanager20110422152239\nodemanager.properties' not found. Using default settings.> Apr 22, 2011 3:23:23 PM oracle.sysman.omsca.util.ProcessOutputReader run
    FINE: NMProcess: Apr 22, 2011 3:23:23 PM weblogic.nodemanager.server.NMServer <init> Apr 22, 2011 3:23:23 PM oracle.sysman.omsca.util.ProcessOutputReader run
    FINE: NMProcess: WARNING: Node manager configuration properties file 'C:\Oracle\MIDDLE~1\WLSERV~1.3\common\emnodemanager20110422152239\nodemanager.properties' not found. Using default settings. Apr 22, 2011 3:23:23 PM oracle.sysman.omsca.util.ProcessOutputReader run
    FINE: NMProcess: <Apr 22, 2011 3:23:23 PM> <INFO> <Saving node manager configuration properties to 'C:\Oracle\MIDDLE~1\WLSERV~1.3\common\emnodemanager20110422152239\nodemanager.properties'> Apr 22, 2011 3:23:23 PM oracle.sysman.omsca.util.ProcessOutputReader run
    FINE: NMProcess: Apr 22, 2011 3:23:23 PM weblogic.nodemanager.server.NMServer <init> Apr 22, 2011 3:23:23 PM oracle.sysman.omsca.util.ProcessOutputReader run
    FINE: NMProcess: INFO: Saving node manager configuration properties to 'C:\Oracle\MIDDLE~1\WLSERV~1.3\common\emnodemanager20110422152239\nodemanager.properties' Apr 22, 2011 3:23:23 PM oracle.sysman.omsca.util.ProcessOutputReader run
    FINE: NMProcess: Node manager v10.3 Apr 22, 2011 3:23:23 PM oracle.sysman.omsca.util.ProcessOutputReader run
    FINE: NMProcess: Apr 22, 2011 3:23:23 PM oracle.sysman.omsca.util.ProcessOutputReader run
    FINE: NMProcess: Configuration settings: Apr 22, 2011 3:23:23 PM oracle.sysman.omsca.util.ProcessOutputReader run
    FINE: NMProcess: Apr 22, 2011 3:23:23 PM oracle.sysman.omsca.util.ProcessOutputReader run
    FINE: NMProcess: NodeManagerHome=C:\Oracle\MIDDLE~1\WLSERV~1.3\common\emnodemanager20110422152239 Apr 22, 2011 3:23:23 PM oracle.sysman.omsca.util.ProcessOutputReader run
    FINE: NMProcess: ListenAddress=win2008x64-2 Apr 22, 2011 3:23:23 PM oracle.sysman.omsca.util.ProcessOutputReader run
    FINE: NMProcess: ListenPort=7401 Apr 22, 2011 3:23:23 PM oracle.sysman.omsca.util.ProcessOutputReader run
    FINE: NMProcess: ListenBacklog=50 Apr 22, 2011 3:23:23 PM oracle.sysman.omsca.util.ProcessOutputReader run
    FINE: NMProcess: SecureListener=true Apr 22, 2011 3:23:23 PM oracle.sysman.omsca.util.ProcessOutputReader run
    FINE: NMProcess: AuthenticationEnabled=true Apr 22, 2011 3:23:23 PM oracle.sysman.omsca.util.ProcessOutputReader run
    FINE: NMProcess: NativeVersionEnabled=true Apr 22, 2011 3:23:23 PM oracle.sysman.omsca.util.ProcessOutputReader run
    FINE: NMProcess: CrashRecoveryEnabled=false Apr 22, 2011 3:23:23 PM oracle.sysman.omsca.util.ProcessOutputReader run
    FINE: NMProcess: JavaHome=C:\Oracle\MIDDLE~1\JROCKI~1.5-3\jre Apr 22, 2011 3:23:23 PM oracle.sysman.omsca.util.ProcessOutputReader run
    FINE: NMProcess: StartScriptEnabled=true Apr 22, 2011 3:23:23 PM oracle.sysman.omsca.util.ProcessOutputReader run
    FINE: NMProcess: StopScriptEnabled=false Apr 22, 2011 3:23:23 PM oracle.sysman.omsca.util.ProcessOutputReader run
    FINE: NMProcess: StartScriptName=startEMServer.cmd Apr 22, 2011 3:23:23 PM oracle.sysman.omsca.util.ProcessOutputReader run
    FINE: NMProcess: StopScriptName= Apr 22, 2011 3:23:23 PM oracle.sysman.omsca.util.ProcessOutputReader run
    FINE: NMProcess: LogFile=C:\Oracle\MIDDLE~1\WLSERV~1.3\common\emnodemanager20110422152239\nodemanager.log Apr 22, 2011 3:23:23 PM oracle.sysman.omsca.util.ProcessOutputReader run
    FINE: NMProcess: LogLevel=INFO Apr 22, 2011 3:23:23 PM oracle.sysman.omsca.util.ProcessOutputReader run
    FINE: NMProcess: LogLimit=0 Apr 22, 2011 3:23:23 PM oracle.sysman.omsca.util.ProcessOutputReader run
    FINE: NMProcess: LogCount=1 Apr 22, 2011 3:23:23 PM oracle.sysman.omsca.util.ProcessOutputReader run
    FINE: NMProcess: LogAppend=true Apr 22, 2011 3:23:23 PM oracle.sysman.omsca.util.ProcessOutputReader run
    FINE: NMProcess: LogToStderr=true Apr 22, 2011 3:23:23 PM oracle.sysman.omsca.util.ProcessOutputReader run
    FINE: NMProcess: LogFormatter=weblogic.nodemanager.server.LogFormatter Apr 22, 2011 3:23:23 PM oracle.sysman.omsca.util.ProcessOutputReader run
    FINE: NMProcess: DomainsFile=C:\Oracle\MIDDLE~1\WLSERV~1.3\common\emnodemanager20110422152239\nodemanager.domains Apr 22, 2011 3:23:23 PM oracle.sysman.omsca.util.ProcessOutputReader run
    FINE: NMProcess: DomainsFileEnabled=true Apr 22, 2011 3:23:23 PM oracle.sysman.omsca.util.ProcessOutputReader run
    FINE: NMProcess: StateCheckInterval=500 Apr 22, 2011 3:23:23 PM oracle.sysman.omsca.util.ProcessOutputReader run
    FINE: NMProcess: QuitEnabled=true Apr 22, 2011 3:23:23 PM oracle.sysman.omsca.util.ProcessOutputReader run
    FINE: NMProcess: Interface= Apr 22, 2011 3:23:23 PM oracle.sysman.omsca.util.ProcessOutputReader run
    FINE: NMProcess: NetMask= Apr 22, 2011 3:23:23 PM oracle.sysman.omsca.util.ProcessOutputReader run
    FINE: NMProcess: UseMACBroadcast=false Apr 22, 2011 3:23:23 PM oracle.sysman.omsca.util.ProcessOutputReader run
    FINE: NMProcess: DomainRegistrationEnabled=false Apr 22, 2011 3:23:23 PM oracle.sysman.omsca.util.ProcessOutputReader run
    FINE: NMProcess: Apr 22, 2011 3:23:23 PM oracle.sysman.omsca.util.ProcessOutputReader run
    FINE: NMProcess: Domain name mappings: Apr 22, 2011 3:23:23 PM oracle.sysman.omsca.util.ProcessOutputReader run
    FINE: NMProcess: Apr 22, 2011 3:23:23 PM oracle.sysman.omsca.util.ProcessOutputReader run
    FINE: NMProcess: Apr 22, 2011 3:23:23 PM oracle.sysman.omsca.util.ProcessOutputReader run
    FINE: NMProcess: <Apr 22, 2011 3:23:23 PM> <INFO> <Secure socket listener started on port 7,401, host WIN2008x64-2/192.168.182.135> Apr 22, 2011 3:23:23 PM oracle.sysman.omsca.util.ProcessOutputReader run
    FINE: NMProcess: Apr 22, 2011 3:23:23 PM weblogic.nodemanager.server.SSLListener run Apr 22, 2011 3:23:23 PM oracle.sysman.omsca.util.ProcessOutputReader run
    FINE: NMProcess: INFO: Secure socket listener started on port 7,401, host WIN2008x64-2/192.168.182.135 Apr 22, 2011 3:23:30 PM oracle.sysman.omsca.util.ProcessOutputReader run
    FINE: Successfully launched the Node Manager. Apr 22, 2011 3:23:30 PM oracle.sysman.omsca.util.ProcessOutputReader run
    FINE: The Node Manager process is running independent of the WLST process. Apr 22, 2011 3:23:30 PM oracle.sysman.omsca.util.ProcessOutputReader run
    FINE: Exiting WLST will not stop the Node Manager process. Please refer Apr 22, 2011 3:23:30 PM oracle.sysman.omsca.util.ProcessOutputReader run
    FINE: to the Node Manager logs for more information. Apr 22, 2011 3:23:30 PM oracle.sysman.omsca.util.ProcessOutputReader run
    FINE: The Node Manager logs will be under C:\Oracle\MIDDLE~1\WLSERV~1.3\common\emnodemanager20110422152239 Apr 22, 2011 3:23:30 PM oracle.sysman.omsca.util.ProcessOutputReader run
    FINE: Connecting to Node Manager ... Apr 22, 2011 3:23:41 PM oracle.sysman.omsca.util.ProcessOutputReader run
    FINE: NMProcess: <Apr 22, 2011 3:23:41 PM> <WARNING> <Configuration error while reading domain directory> Apr 22, 2011 3:23:41 PM oracle.sysman.omsca.util.ProcessOutputReader run
    FINE: NMProcess: weblogic.nodemanager.common.ConfigException: The domain 'GCDomain' at 'C:\Oracle\gc_inst\user_projects\domains\GCDomain' was not registered in the nodemanager.domains file and dynamic domain registration is not supported. Please register the domain in the nodemanager.domains file. Apr 22, 2011 3:23:41 PM oracle.sysman.omsca.util.ProcessOutputReader run
    FINE: NMProcess:      at weblogic.nodemanager.server.NMServer.getDomainManager(NMServer.java:257) Apr 22, 2011 3:23:41 PM oracle.sysman.omsca.util.ProcessOutputReader run
    FINE: NMProcess:      at weblogic.nodemanager.server.Handler.handleDomain(Handler.java:224) Apr 22, 2011 3:23:41 PM oracle.sysman.omsca.util.ProcessOutputReader run
    FINE: NMProcess:      at weblogic.nodemanager.server.Handler.handleCommand(Handler.java:108) Apr 22, 2011 3:23:41 PM oracle.sysman.omsca.util.ProcessOutputReader run
    FINE: NMProcess:      at weblogic.nodemanager.server.Handler.run(Handler.java:70) Apr 22, 2011 3:23:41 PM oracle.sysman.omsca.util.ProcessOutputReader run
    FINE: NMProcess:      at java.lang.Thread.run(Thread.java:619) Apr 22, 2011 3:23:41 PM oracle.sysman.omsca.util.ProcessOutputReader run
    ...

    I have a JDK already installed, but isn't JRockit being used by NodeManager in this case? Does NodeManager need to run on the JDK?
    Regardless, I tried changing JavaHome in the nodemanager.properties file to the JDK/jre directory, but the log file still has the original path. The log seems to indicate that the process thinks that NodeManager is down because it can't connect, so it launches a new instance and uses default configuration parameters, which naturally wouldn't have my changes to the nodemanager.domain or nodemanager.properties files.
    Also, the log says it can't connect to NodeManager at win2008x64-2:7,401. I'm not sure why there's a comma in there, but by the time this configuration step fails, there is a javaw.exe process listening on port 7401 and if I retry the step without killing it, the step will fail earlier because the port is already bound.

  • Installation issue:create domain failed in configuration steps

    Hello,
    I am trying to install Oracle 11g BIEE in windows XP 32 bit machine.
    Till configurtaion steps no problem.After that it takes some 1 hr in create domain step and at the end shows failed.
    I searched in this forum, in one its said create a separate folder for temp and assign that as path in the
    environment variable TEMP AND TMP
    I did that still its same.
    If i click continue then also same
    Almost everything which comes after Create doman is failed.
    Pls help,what should i do?
    Thanks

    Hello,
    just one thing installing RCU when need to give the schema name i didn't give sys and gave a user who is normal user with dba privillege because of which i got some errors like insufficient privilleges like while running something like this...
    "grant execute dbms_ouput to dev_mds"
    and some plsql object creation failed like "Pl/sql object failed SD Clean up procedure",at the time when u click create button.
    But at the end it showed the schema being created.
    So i didn't bother much about that.
    I cannot give sys user as i don't have my own db in my machine.
    Is this a problem because of which now i am facing problem in configuration steps????????
    Thanks

  • DBUA Failed at "Configuring Database with Enterprise Manager"

    Hi All,
    We upgraded our production database and we have configured OEM in that, while upgrading from 10.2.0.3 to 10.2.0.5, it failed at the stage "Configuring Database with Enterprise Manager". Could anyone suggest how to upgrad OEM to 10.2.0.5.

    I don't think you will find logging regarding failed jobs on the system. But you can create a "view only" user, see MOS: How To Create Administrator Accounts (Super Admin, Admin, View Only, etc) In Grid Control [ID 377310.1]
    Eric

  • SCCM 2012 R2 - Migration TS Failed in Release Request Step with Error Code 0x80004005

    Hi
    I have Upgraded my lab from SCCM 2012 SP1 to SCCM 2012 R2. Now, While I am running TS for Refresh/Replace Migration, its successfully captures all the Data & settings and can also restores all Data & settings, but at release request Step TS got failed.
    In SMSTS log file error was "Release Request Failed with error code 0x80004005".
    Is there any KB released by Microsoft to fix this issue?? Due to this issue I am unable to run any other TS.

    I've seen a few weird scenarios with task sequences after an upgrade from SP1 to R2.
    In most cases I've been able to fix these "problems" by simply creating a new task sequence, and copy all the custom steps to the new task sequence.
    Also make sure to update boot images, mdt packages, usmt etc. to new versions.
    So thats what I'd try first....
    Ronni Pedersen | Microsoft MVP - ConfigMgr | Blogs:
    www.ronnipedersen.com/ and www.SCUG.dk/ | Twitter
    @ronnipedersen

  • SMB Remount Failed for url (serverpath) with error =17

    I keep getting the following messages in the system log. Does anyone know what the error 17 is?
    7/15/14 7:30:39.000 AM  kernel[0]   smbfs_down: Remounting fs01/USERS$
    7/15/14 7:30:39.000 AM  kernel[0]   smbfs_down: Remounting fs01/DEPTS
    7/15/14 7:30:39.000 AM  kernel[0]   smb_iod_reconnect: Reconnected share USERS$ with server fs01
    7/15/14 7:30:39.000 AM  kernel[0]   smb_iod_reconnect: Reconnected share DEPTS with server pmfs01p
    7/15/14 7:30:53.650 AM  smbremountserver[1913]  SysctlRemountFS: failed for 0x2d000004:0x15 - File exists
    7/15/14 7:30:53.650 AM  smbremountserver[1913]  smb_remount_with_fsid: remount failed for url //(userID)@fs01/dat/users with error = 17
    7/15/14 7:30:58.166 AM  smbremountserver[1912]  SysctlRemountFS: failed for 0x2d000003:0x15 - File exists
    7/15/14 7:30:58.166 AM  smbremountserver[1912]  smb_remount_with_fsid: remount failed for url //(userID)@fs01/dat/DEPTS with error = 17

    Please add the fully qualified domain name (FQDN) & Ip address of your server to the hosts file.This would solve your problem.

  • Release Procedure Configuration steps with screenshots

    Hi,
        Can anybody send release procedure  configuration settings with screen shots.
    Regards
    Ramakrishna

    Hi Ram,
    Release strategy steps
    SPRO-MM- Purchasing-Purchase Requisition-Release Procedure- Procedure with Classification
    1.Edit Charatestic,(CT04), use Class 032
    2.Edit Class(CL02)
    3.Set up Procedure with Classification
    3.1. Relesae Group,
    3.2Relaese Code,
    3.3.Relaese Inicator,
    3.4Relaese Statergies
    3..4.1. Relaese Prerequisities
    3.4.2. Relaese Statuses
    3.4.3. Classification
    3.4.4. Realesae Simulation
    Release procedure for Purchase orders here is process flow.
    Go to spro>img>materials management>purchassing>Release procedure for Purchase orders
    1. Create characterstics -Intially you will create characterstics based on which you would like to release a purchase order.
    Charactrestics are like plant, purchase order value,purchase group etc.. Assign characterstics to release class 032.
    2. Create Release group say 01 and create release codes like pm(project manager), gm(general manager) etcc..
    3. Create a Release starategy say s1 and assign release group to it 01 and release class 032 and department to whom this release stategy applies say MM. define the order of release say first pm followed by gm etc..
    4. under classfication define value limits for release of purchase order.
    5. define release indicators
    6. simulate the release
    7. assign if there is any workflow.
    For more Check the links:
    http://www.scribd.com/doc/531679/Release-Procedure-for-Purchase-Requisitions
    http://www.sap-img.com/workflow/workflow-of-purchase-requisition-release-strategy.htm
    http://www.sap123.com/showthread.php?t=59

  • Error: RFC of "Spda_conflict_check" failed during configuration roadmap

    We are facing problem during implementation of EHP4 on IDES ERP 6.0/NW7.0 on oracle 10.2 during the configuration roadmap.
    We are using the SAPEHPi with SP level 20.
    The pahse PREP_EXTENSION/CONFLICT_CHECK terminates with the error
    Error : RFC of "Spda_conflict_check" failed
    key : RFC_ERROR_SYSTEM_FAILURE
    MESSAGE: Time Limit Exceeded.
    After checking the RFC trace we have made changes in the RFC
    destination "SERVER_EXEC"(Starts Program 'RFCEXEC' on Application
    Server) and made the necessary changes by giving the path to the
    program "/usr/sap/IE1/SYS/exe/uc/NTAMD64/rfcsdk/bin/rfcexec" and
    providing the hostname where EHP4 installation is going on and test
    connection was ok.
    Another RFC Destination "EPS_CLIENT" (Electronic Parcel Service: R/3 <-
    > EPS Client Communication) is not able to connect. we have provided
    the target host and doesnot made any changes to program entry
    i,e "/bas/BIN/gen/dbg/hp/epc".RFC conncetion is getting failed.
    What is this program does in system "/bas/BIN/gen/dbg/hp/epc".?
    log file of dev_rfc1
    Trace file opened at 20090706 134701 W. Europe Daylight Time, SAP-REL 700,0,144 RFC-VER U 3 957098 MT-SL
    ======> CPIC-CALL: 'ThSAPOCMINIT' : cmRc=20 thRc=497
    Unable to determine host address: NiHostToAddr failed                   
    ABAP Programm: RSRFCPIN (Transaction: SM59)
    User: RANGUPTA (Client: 800)
    Destination: SERVER_EXEC (handle: 2, , )
    Error RFCIO_ERROR_SYSERROR in abrfcpic.c : 1501
    CPIC-CALL: 'ThSAPOCMINIT' : cmRc=20 thRc=497
    Unable to determine host address: NiHostToAddr failed                   
    DEST =SERVER_EXEC
    HOST =iwdfim01
    PROG =/usr/sap/T3A/SYS/exe/run/rfcsdk/bin/rfcexec
    Trace file opened at 20090706 135428 W. Europe Daylight Time, SAP-REL 700,0,144 RFC-VER U 3 957098 MT-SL
    ======> CPIC-CALL: 'ThSAPOCMINIT' : cmRc=19 thRc=497
    Unable to determine host address: NiHostToAddr failed                   
    ABAP Programm: RSRFCPIN (Transaction: SM59)
    User: RANGUPTA (Client: 800)
    Destination: EPS_CLIENT (handle: 2, , )
    Error RFCIO_ERROR_SYSERROR in abrfcpic.c : 1501
    CPIC-CALL: 'ThSAPOCMINIT' : cmRc=19 thRc=497
    Unable to determine host address: NiHostToAddr failed                   
    DEST =EPS_CLIENT
    HOST =q4de3gsy207
    PROG =/bas/BIN/gen/dbg/hp/epc
    GWHOST =hs0305
    GWSERV =sapgw95
    Trace file opened at 20090707 104841 W. Europe Daylight Time, SAP-REL 700,0,144 RFC-VER U 3 957098 MT-SL
    ======> CPIC-CALL: 'ThSAPCMRCV' : cmRc=20 thRc=456
    Timeout during connection setup (check that partner exists)             
    ABAP Programm: SAPLCRFC (Transaction: SM59)
    Called function module: RFC_PING
    User: RANGUPTA (Client: 001)
    Destination: EPS_CLIENT (handle: 3, 58623496, {EAD26ADE-05F0-F12A-89D5-005056955BE2})
    Error RFCIO_ERROR_SYSERROR in abrfcpic.c : 3295
    CPIC-CALL: 'ThSAPCMRCV' : cmRc=20 thRc=456
    Timeout during connection setup (check that partner exists)             
    Error RFCIO_ERROR_MESSAGE in abrfcio.c : 1817
    Trace file opened at 20090707 105909 W. Europe Daylight Time, SAP-REL 700,0,144 RFC-VER U 3 957098 MT-SL
    ======> CPIC-CALL: 'ThSAPCMRCV' : cmRc=20 thRc=456
    Timeout during connection setup (check that partner exists)             
    ABAP Programm: RSRFCPIN (Transaction: SM59)
    Called function module: RFC_PING
    User: RANGUPTA (Client: 001)
    Destination: EPS_CLIENT (handle: 2, 59247771, {5DD46ADE-47D5-F1FE-89D5-005056955BE2})
    Error RFCIO_ERROR_SYSERROR in abrfcpic.c : 3295
    CPIC-CALL: 'ThSAPCMRCV' : cmRc=20 thRc=456
    Timeout during connection setup (check that partner exists)             
    Error RFCIO_ERROR_MESSAGE in abrfcio.c : 1817
    Trace file opened at 20090707 110453 W. Europe Daylight Time, SAP-REL 700,0,144 RFC-VER U 3 957098 MT-SL
    ======> CPIC-CALL: 'ThSAPCMRCV' : cmRc=20 thRc=456
    Timeout during connection setup (check that partner exists)             
    ABAP Programm: RSRFCPIN (Transaction: SM59)
    Called function module: RFC_PING
    User: RANGUPTA (Client: 001)
    Destination: EPS_CLIENT (handle: 2, 59602149, {2CD56ADE-0BA0-F100-89D5-005056955BE2})
    Error RFCIO_ERROR_SYSERROR in abrfcpic.c : 3295
    CPIC-CALL: 'ThSAPCMRCV' : cmRc=20 thRc=456
    Timeout during connection setup (check that partner exists)             
    Error RFCIO_ERROR_MESSAGE in abrfcio.c : 1817

    Hi,
    No i am not running SAPEHPI from remote host. it is a local installation. ERP6.0(IE1) is an IDES system with EHP3.
    During the Conflict_check phase installer programme accesses RFC Destination "SERVER_EXEC" and "EPS_CLIENT".
    SERVER_EXEC had some wierd entry.
    Destination: SERVER_EXEC (handle: 2, , )
    Error RFCIO_ERROR_SYSERROR in abrfcpic.c : 1501
    CPIC-CALL: 'ThSAPOCMINIT' : cmRc=20 thRc=497
    Unable to determine host address: NiHostToAddr failed                   
    DEST =SERVER_EXEC
    HOST =iwdfim01
    PROG =/usr/sap/T3A/SYS/exe/run/rfcsdk/bin/rfcexec
    SERVER_EXEC had different path of the program rfcexec "PROG =/usr/sap/T3A/SYS/exe/run/rfcsdk/bin/rfcexec" and i changed it to "/usr/sap/IE1/SYS/exe/uc/NTAMD64/rfcsdk/bin/rfcexec". after this RFC was working fine but the conflict _check again failed with the same error.
    This time RFC EPS_CLIENT had errors:
    Destination: EPS_CLIENT (handle: 2, , )
    Error RFCIO_ERROR_SYSERROR in abrfcpic.c : 1501
    CPIC-CALL: 'ThSAPOCMINIT' : cmRc=19 thRc=497
    Unable to determine host address: NiHostToAddr failed                   
    DEST =EPS_CLIENT
    HOST =q4de3gsy207
    PROG =/bas/BIN/gen/dbg/hp/epc
    GWHOST =hs0305
    GWSERV =sapgw95
    so i changed the GWHOST to q4de3gsy207  and GWSERVER: sapgw00.
    what this program does =/bas/BIN/gen/dbg/hp/epc
    the test connection fails
    but the problem persists.
    i dont know from where it is accessing the hostname :iwdfim01
    Edited by: Ranjeet Gupta on Jul 7, 2009 5:21 PM

  • Cannot reinstall WSUS 3.0 sp2 fails at configuring database

    all -
    a few weeks ago the WSUS stopped working on a ts server.  according to lawrence garvin it cannot be installed on a ts server.  now i'm trying to install it back onto the sbs 2008 server.  it won't install.  when it gets to the configuring
    the db, it throws an error.  when i open the console i cannot connect to the server.  apparently, this is very common, but all the responses have been tried and still no success.
    here's the log.  it's now not installing the db.
    2014-03-03 10:01:10  Success   MWUSSetup          Validating pre-requisites...
    2014-03-03 10:01:11  Error     MWUSSetup          Failed to determine if an higher version of WSUS is installed. Assuming it is not... (Error 0x80070002: The system cannot find the file specified.)
    2014-03-03 10:01:11  Error     MWUSSetup          WSUS is outdated. But this will not block setup (Error 0x00000000: The operation completed successfully.)
    2014-03-03 10:01:18  Success   MWUSSetup          Initializing installation details
    2014-03-03 10:01:18  Success   MWUSSetup          Skipping Asp.Net install since not running on win2k3...
    2014-03-03 10:01:18  Success   MWUSSetup          Installing wYukon using ocsetup
    2014-03-03 10:01:18  Success   MWUSSetup          Installing Windows Internal database using ocsetup with command line as "ocsetup "WSSEE" /quiet /norestart"
    2014-03-03 10:01:42  Error     MWUSSetup          The process ocsetup "WSSEE" /quiet /norestart returned error: 0x643 (Error 0x80070643: Fatal error during installation.)
    2014-03-03 10:01:42  Error     MWUSSetup          ExecCmd failed (Error 0x80070643: Fatal error during installation.)
    2014-03-03 10:01:42  Error     MWUSSetup          Install Windows Internal database: Failed to execute "ocsetup "WSSEE" /quiet /norestart" (Error 0x80070643: Fatal error
    during installation.)
    2014-03-03 10:01:42  Error     MWUSSetup          CInstallDriver::PerformSetup: Installation of wYukon failed (Error 0x80070643: Fatal error during installation.)
    2014-03-03 10:01:42  Error     MWUSSetup          CSetupDriver::LaunchSetup: Setup failed (Error 0x80070643: Fatal error during installation.)
    2014-03-03 10:07:11  Error     MWUSSetup          DoInstall: Wsus setup failed (Error 0x80070643: Fatal error during installation.)
    2014-03-03 10:08:53  Success   MWUSSetup          Validating pre-requisites...
    2014-03-03 10:08:53  Error     MWUSSetup          Failed to determine if an higher version of WSUS is installed. Assuming it is not... (Error 0x80070002: The system cannot find the file specified.)
    2014-03-03 10:08:53  Error     MWUSSetup          WSUS is outdated. But this will not block setup (Error 0x00000000: The operation completed successfully.)
    2014-03-03 10:12:23  Success   MWUSSetup          Initializing installation details
    2014-03-03 10:12:23  Success   MWUSSetup          Skipping Asp.Net install since not running on win2k3...
    2014-03-03 10:12:23  Success   MWUSSetup          Installing wYukon using ocsetup
    2014-03-03 10:12:23  Success   MWUSSetup          Installing Windows Internal database using ocsetup with command line as "ocsetup "WSSEE" /quiet /norestart"
    2014-03-03 10:12:33  Error     MWUSSetup          The process ocsetup "WSSEE" /quiet /norestart returned error: 0x643 (Error 0x80070643: Fatal error during installation.)
    2014-03-03 10:12:33  Error     MWUSSetup          ExecCmd failed (Error 0x80070643: Fatal error during installation.)
    2014-03-03 10:12:33  Error     MWUSSetup          Install Windows Internal database: Failed to execute "ocsetup "WSSEE" /quiet /norestart" (Error 0x80070643: Fatal error
    during installation.)
    2014-03-03 10:12:33  Error     MWUSSetup          CInstallDriver::PerformSetup: Installation of wYukon failed (Error 0x80070643: Fatal error during installation.)
    2014-03-03 10:12:33  Error     MWUSSetup          CSetupDriver::LaunchSetup: Setup failed (Error 0x80070643: Fatal error during installation.)
    Lee Feldman SMB Consultant

    according to the article i cannot complete steps 6 - 8 because it's an SBS 2k8 server.  here's what happens when i try to install it.
    Windows Server Update Services 3.0 SP2 could not install Windows Internal Database. For more information, see the Setup log "C:\Users\Admin\AppData\Local\Temp\2\WSUSSetup.log".
    2014-03-03 10:01:10  Success   MWUSSetup          Validating pre-requisites...
    2014-03-03 10:01:11  Error     MWUSSetup          Failed to determine if an higher version of WSUS is installed. Assuming it is not... (Error 0x80070002: The system cannot find the file specified.)
    2014-03-03 10:01:11  Error     MWUSSetup          WSUS is outdated. But this will not block setup (Error 0x00000000: The operation completed successfully.)
    2014-03-03 10:01:18  Success   MWUSSetup          Initializing installation details
    2014-03-03 10:01:18  Success   MWUSSetup          Skipping Asp.Net install since not running on win2k3...
    2014-03-03 10:01:18  Success   MWUSSetup          Installing wYukon using ocsetup
    2014-03-03 10:01:18  Success   MWUSSetup          Installing Windows Internal database using ocsetup with command line as "ocsetup "WSSEE" /quiet /norestart"
    2014-03-03 10:01:42  Error     MWUSSetup          The process ocsetup "WSSEE" /quiet /norestart returned error: 0x643 (Error 0x80070643: Fatal error during installation.)
    2014-03-03 10:01:42  Error     MWUSSetup          ExecCmd failed (Error 0x80070643: Fatal error during installation.)
    2014-03-03 10:01:42  Error     MWUSSetup          Install Windows Internal database: Failed to execute "ocsetup "WSSEE" /quiet /norestart" (Error 0x80070643: Fatal error during installation.)
    2014-03-03 10:01:42  Error     MWUSSetup          CInstallDriver::PerformSetup: Installation of wYukon failed (Error 0x80070643: Fatal error during installation.)
    2014-03-03 10:01:42  Error     MWUSSetup          CSetupDriver::LaunchSetup: Setup failed (Error 0x80070643: Fatal error during installation.)
    2014-03-03 10:07:11  Error     MWUSSetup          DoInstall: Wsus setup failed (Error 0x80070643: Fatal error during installation.)
    2014-03-03 10:08:53  Success   MWUSSetup          Validating pre-requisites...
    2014-03-03 10:08:53  Error     MWUSSetup          Failed to determine if an higher version of WSUS is installed. Assuming it is not... (Error 0x80070002: The system cannot find the file specified.)
    2014-03-03 10:08:53  Error     MWUSSetup          WSUS is outdated. But this will not block setup (Error 0x00000000: The operation completed successfully.)
    2014-03-03 10:12:23  Success   MWUSSetup          Initializing installation details
    2014-03-03 10:12:23  Success   MWUSSetup          Skipping Asp.Net install since not running on win2k3...
    2014-03-03 10:12:23  Success   MWUSSetup          Installing wYukon using ocsetup
    2014-03-03 10:12:23  Success   MWUSSetup          Installing Windows Internal database using ocsetup with command line as "ocsetup "WSSEE" /quiet /norestart"
    2014-03-03 10:12:33  Error     MWUSSetup          The process ocsetup "WSSEE" /quiet /norestart returned error: 0x643 (Error 0x80070643: Fatal error during installation.)
    2014-03-03 10:12:33  Error     MWUSSetup          ExecCmd failed (Error 0x80070643: Fatal error during installation.)
    2014-03-03 10:12:33  Error     MWUSSetup          Install Windows Internal database: Failed to execute "ocsetup "WSSEE" /quiet /norestart" (Error 0x80070643: Fatal error during installation.)
    2014-03-03 10:12:33  Error     MWUSSetup          CInstallDriver::PerformSetup: Installation of wYukon failed (Error 0x80070643: Fatal error during installation.)
    2014-03-03 10:12:33  Error     MWUSSetup          CSetupDriver::LaunchSetup: Setup failed (Error 0x80070643: Fatal error during installation.)
    2014-03-03 10:19:56  Error     MWUSSetup          DoInstall: Wsus setup failed (Error 0x80070643: Fatal error during installation.)
    2014-03-05 05:10:47  Success   MWUSSetup          Validating pre-requisites...
    2014-03-05 05:10:47  Error     MWUSSetup          Failed to determine if an higher version of WSUS is installed. Assuming it is not... (Error 0x80070002: The system cannot find the file specified.)
    2014-03-05 05:10:47  Error     MWUSSetup          WSUS is outdated. But this will not block setup (Error 0x00000000: The operation completed successfully.)
    2014-03-05 05:10:55  Success   MWUSSetup          Initializing installation details
    2014-03-05 05:10:55  Success   MWUSSetup          Skipping Asp.Net install since not running on win2k3...
    2014-03-05 05:10:55  Success   MWUSSetup          Installing wYukon using ocsetup
    2014-03-05 05:10:55  Success   MWUSSetup          Installing Windows Internal database using ocsetup with command line as "ocsetup "WSSEE" /quiet /norestart"
    2014-03-05 05:11:36  Error     MWUSSetup          The process ocsetup "WSSEE" /quiet /norestart returned error: 0x643 (Error 0x80070643: Fatal error during installation.)
    2014-03-05 05:11:36  Error     MWUSSetup          ExecCmd failed (Error 0x80070643: Fatal error during installation.)
    2014-03-05 05:11:36  Error     MWUSSetup          Install Windows Internal database: Failed to execute "ocsetup "WSSEE" /quiet /norestart" (Error 0x80070643: Fatal error during installation.)
    2014-03-05 05:11:36  Error     MWUSSetup          CInstallDriver::PerformSetup: Installation of wYukon failed (Error 0x80070643: Fatal error during installation.)
    2014-03-05 05:11:36  Error     MWUSSetup          CSetupDriver::LaunchSetup: Setup failed (Error 0x80070643: Fatal error during installation.)
    2014-03-05 05:12:17  Error     MWUSSetup          DoInstall: Wsus setup failed (Error 0x80070643: Fatal error during installation.)
    Lee Feldman SMB Consultant

Maybe you are looking for