Reinstall of Lion Failed...progress bar frozen...what recourse?

Multiple system freezes lead me to a Lion reinstall on my mid-2007 iMac with 4gb ram. I downloaded Recovery Disk Assistant to external drive and went through reinstall process. All went normally until Lion began to install. Progress bar froze at 6 minutes remaining the first attempt and 24 minutes remaining the second attempt.  Am I screwed or what? I don't appear to have any options except continued attempts at installing.

My reinstall saga did have a somewhat happy ending.  I took Linc's advice and went to bed with 24 minutes remaining on the frozen progress bar.  Upon arising (8 hrs later) I checked my Mac to find 24 minutes remaining.  I forced shutdown and restarted again.  This time (3rd attempt) after only about 35 total minutes, the install was 'successful.' I put that successful in quotes because it took 3 more restarts for my Mac to successfully load. 
I believe the moral of the story is don't give up too quickly on your Mac.  When at first you don't succeed, try, try, and try again.

Similar Messages

  • HT1451 I am trying to restore my iphone but its stuck at the apple logo with the progress bar. What should I do?

    I am trying to restore my iphone but it has been stuck at the apple logo with the progress bar and it shows no signs of loading at all. What should I do?

    Hello kuukua.b,
    Thanks for using Apple Support Communities.
    Please try to restart and reset your iPhone by following the steps below, and then resume your restore process.
    Turn your iOS device off and on (restart) and reset
    http://support.apple.com/kb/ht1430
    Take care,
    Alex H.

  • Help please! Photoshop CS5Bridge Auto collection progress bar frozen. How to force quit?

    I am stuck in Bridge/ CS5.  I put pictures into an Auto Collection and then hit cancel. It did not cancel completely.  It has been frozen for 7 hours with the progress bar stuck, still active, three fourths of the way done.
    How do I stop it or force it closed?
    Thank you for help!!!!

    Good day!
    How do I stop it or force it closed?
    That would depend on your OS, I guess.
    On a Mac cmd-alt-esc raises the »Force Quit Application« dialog, I don’t know for Windows.
    But this is not the Bridge Forum anyways, for Brisge specific issues check out
    http://forums.adobe.com/community/bridge
    Regards,
    Pfaffenbichler

  • HT201274 All I have on my Ipod is a picture of an apple and a blank process bar.  What do I do?

    All I have on my Ipod touch is a picture of an apple and a blank progress bar.  What did I do?

    Try:
    - iOS: Not responding or does not turn on
    - Also try DFU mode after try recovery mode
    How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
    - If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
    - If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
    Apple Retail Store - Genius Bar       

  • Strange progress bar after waking from sleep

    This, i am experiencing for the first time.
    1. Ive put my mac pro 3,1 to sleep.
    2. Then, after some minutes (20+) i came back to wake it, but the white led next to the power button was not blinking, but wasnt on at all.
    3. Then i turned computer on (as waking him up) by pressing the power button - because the keys nor the mouse buttons wasnt doing the thing.
    4. THEN I SEE THIS SCREEN with progress bar.
    What does it mean ?
    Was my computer hibernating ?
    5. Then when the progress bar ended, the display went off. The computer power diode was on, but i couldnt do anything.
    'No signal' at display... no response on the keyboard/mouse.
    What was that?
    What should I do now?
    Thanks!

    This is the same, but with my MacBook Pro 9,2 running 10.8.2.
    It does the same, I'll leave it to sleep for an hour, or overnight and then when I open the lid again, I have to put my password in at the FileVault screen and then get this bar. Then my other login screen will come up (with my desktop background) but then, my Mac goes off. The screen goes black and I assume it is trying to sleep again.

  • How to associate audio file with progress bar

    Hi all,
    I have a case in which I need to associate an audio file witha  progress bar. What I want to do is to able to play a audio file which will say " Process started.." Process going on" and process ends, and it shoud be synchronized with the progress bar. Is there a way to do this .
    Please let me know
    Thanks,
    Ankit G
    Solved!
    Go to Solution.

    Are you referring to a LabVIEW horizontal/vertical progress bar, which basically has a U8 integer constantly written to it? Is this in a loop as it fills up?
    If so, there is an entire palette that allows you to play waveforms. As you're writing to your progress bar the number, you can keep checking what that number is (event or case structure), and when it hits particular values, you play particular sounds. Here is a screenshot of that palette.
    Ravi A.
    National Instruments | Applications Engineer

  • Progress bar is stuck at 50% when updating to Yosemite

    I am trying to update to Yosemite OS on my MacBook Pro but the screen just shows a half finished progress bar. What should I do?? I didn't make a backup and I'm afraid to hold down the power button. Any help is much appreciated!! I've tried to wait it out for some hours now, but still no luck.

    I was also was stuck for a very long time (3 hours) with progress bar at 50%.   I followed Bjerglund's bravery and held the power button down and restarted again.  Happy to report, it also worked for me.   Thanks Bjerglund for leading the way.
    Late 2009 MacBook Pro

  • Reinstalling Lion Progress Bar Jumps Backwards

    Anyone have this problem?  I'm reinstalling Lion, and I get to "less than a minute," then all of a sudden the progress bar jumps backwards to "21 minutes left!" WTH????

    The first part is downloading what will be installed. The second part is the actual installation.

  • HT1923 iTunes on my Windows Vista has failed to update over several weeks. Attempting uninstal/reinstall according to iTunes support page. Will not uninstall 'Apple Mobile Device Support' - goes to 99% then progress bar unwinds completely. Tried rebooting

    iTunes on my Windows Vista has failed to update over several weeks. Audio will not play out. Attempting uninstal/reinstall according to iTunes support page. Will not uninstall 'Apple Mobile Device Support' - goes to 99% then progress bar unwinds completely. Tried rebooting. Any clues??

    Hey petanque1,
    Thanks for the question. I understand that you are experiencing issues installing iTunes for Windows. The following article outlines the error message you are receiving and a potential resolution:
    iTunes 11.1.4 for Windows: Unable to install or open
    http://support.apple.com/kb/TS5376
    Some Windows customers may experience installation issues while trying to install or open iTunes 11.1.4.
    Symptoms may include:
    "The program can't start because MSVCR80.dll is missing from your computer"
    "iTunes was not installed correctly. Please reinstall iTunes. Error 7 (Windows Error 126)”
    "Runtime Error: R6034 - An application has made an attempt to load the C runtime library incorrectly"
    "Entry point not found: videoTracks@QTMovie@@QBE?AV?$Vector@V?$RefPtr@VQTTrack@@@***@@$0A@VCrashOnOverf low@@***@@XZ could not be located in the dynamic link library C:\Program Files(x86)\Common Files\Apple\Apple Application Support\WebKit.dll”
    Resolution
    Follow these steps to resolve the issue:
    Check for .dll files
    1. Go to C:\Program Files (x86)\iTunes and C:\Program Files\iTunes and look for .dll files.
    2. If you find QTMovie.DLL, or any other .dll files, move them to the desktop.
    3. Reboot your computer.
    Note: Depending on your operating system, you may only have one of the listed paths.
    Uninstall and reinstall iTunes
    1. Uninstall iTunes and all of its related components.
    2. Reboot your computer. If you can't uninstall a piece of Apple software, try using theMicrosoft Program Install and Uninstall Utility.
    3. Re-download and reinstall iTunes 11.1.4.
    Thanks,
    Matt M.

  • After updating to iOS 5.0.1 my iphone 4 is frozen on the screen with the apple logo and a progress bar under it. What should i do?

    After updating to iOS 5.0.1 my iphone 4 is frozen on the screen with the apple logo and the progress bar under it. Held the power and home button, the phone shut off, and restarted the progress. If i try to turn the phone on, it keeps telling me to connect to iTunes. Once I do, it asks me to restore, i click restore, but it keeps on freezing at the screen. What is the problem? Error 1603 comes up. Followed the link to apple's page but nothing that was said there worked.

    See Here for
    Unable to Update or Restore
    http://support.apple.com/kb/HT1808

  • I purchased lion osx 10.7 and it has just said "installing" where you click to "buy now" for the last 2 hours.  There is no progress bar or anything. What is going on?

    I purchased lion osx 10.7 and it just says "installing" where you click to "buy it now" and it has been doing nothing for the past 2 hours.  There is no progress bar or anything that says its being downloaded.  I was sent an email by apple confirming I purchased it but nothing is happening.  I tried restarting the internet and clicking on download and the same thing happens.  What is going on?

    Mine says it's going to take 10 hiurs to download or something daft. I'm guessing the servers are being hit pretty hard right now. Like the poster above said, check in the 'purchased' part of the app store to make sure it's actually ticking along and then just...wait.

  • My ipad is in recovery mode that failed,it shows the progress bar but is frozen. Itunes shows the wrong name for the Ipad but the correct account.

    my ipad is in recovery mode that failed,it shows the progress bar but is frozen. Itunes shows the wrong name for the Ipad but the correct account.

    You're gonna have to restore the iPhone from your last backup with iTunes. You did do a backup before you attempted to update the software didn't you?

  • I bought fifa 2012, while I sync with ipod touch 4g the progress bar more than half, after that my ipod says "the trasferiment fifa 2012 has failed." What should I do?

    I bought fifa 2012, while i sync with ipod the progress bar more then half,after my ipod says " the trasferment of fifa 2012 has failed". What should i do?

    - Try directly downloading it on the iPod. To not get charged again see:
    Downloading past purchases from the App Store, iBookstore, and iTunes Store
    - You can also delete it form iTunes and then redownload (see link above) and try resyncing.

  • MacBook Pro frozen on startup screen with progress bar and then it turns off

    Hello, I have a MacBook Pro 15" of early 2012 with a i5 Intel, 4GB of RAM  and a  500 GB HD.
    I was installing the new suit of Adobe, when suddenly my Mac got frozen, vertical coloured lines appeared and the image on screen went distorted. I had to reboot the Mac by holding the power button until the screen turned off and when I turned it on, the lines appeared again and it itself automatically rebooted. Then the screen (now with no vertical lines) got frozen on the startup grey screen with the apple logo and the spinning wheel for hours with no response.
    I tried to follow the steps of the official mac forums like verifying the HD with CMD+R and then Disk Utility, it says everything's fine; the same happens with CMD+S, no errors. I reinstalled Mavericks with the same CMD+R. I already reset the PRAM, SMC  and performed a Safe Boot staring up in Single user mode and Verbose Mode and nothing, the same startup screen. I made too thins thing of holding shift until the progress bar appeared.  Three days later (Today) I repeated the steps again and finally the verbose mode. Now, when I turn it on, the startup screen appears again (Apple Log and spinning wheel) with a progress bar. When it completes, the Mac turn itself off.
    if you can help me, please. I don't know what else to do. The last thing is technical service.

    Hi again ggt15,
    You can find some more information about the Recovery Partition of your hard drive here:
    OS X: About OS X Recovery
    http://support.apple.com/kb/HT4718
    It sounds like you might be trying to reinstall your copy of the operating system. If that's the case, you may also find some helpful information here:
    OS X Lion: Reinstall Mac OS X
    http://support.apple.com/kb/PH3878
    Thank you for using the Apple Support Community. Due to the nature of your issue or question you may find more information by using another one of Apple's support resources - https://expresslane.apple.com/GetproductgroupList.action.
    Cheers,
    Braden

  • I cannot seem to get iTunes to contact software update server. Seems to only give a progress bar which but never seems to contact.  running latest version of Lion and latest iTunes

    I cannot sseem to contact the iphone software update server.  Only get progress bar, but never seems to contact.  Am running Lion 1-.7.3 and most recent version of itunes(10.6).  What is up?

    The servers have been jammed with everyone trying to get the new version of iTunes and iOS, so you may just need to wait a day or so until things calm down.
    Regards.

Maybe you are looking for

  • How can I resolve slow browsing in finder when connected to a share point on a linux box?

    Hi, I am having huge difficulties when browsing a share point that is on a Linux box. I am connecting to it with a Macbook Pro running Lion 10.7.5. Initially there was an SMB share point setup on the server which was extremely slow to browse. I then

  • My wifi only works when i put my 4s in the refrigarator

    hey guys i bought my iphone 4s about 4 months ago, and about  month ago when i came back from camping i turned on my iphone wich was turned of for about 5 days (at home in my drawer). i had  9 updates listed on the app store and let them update  all

  • Use of jsp-file in web.xml

    hello can anybody explain about , when we need <jsp-file> in web.xml and why we use this tag in place of <url-pattern>?

  • Discover Desktop Question.

    hi, i've installed discoverer desktop edition on a client. i made necessary changes to tnsnames.ora and sqlnet.ora when i try to login using user disco01/disco01@testgl i get an error saying, you don't have access to any end user layer tables. the sa

  • Running a file in test mode

    hi iam doing a bdc recording in which there is an option to runthe file in test mode i.e if that button is checked then only will the validations will be done and the program should stop executingand save the succesful records at the end of it and sh