Reinstall OS 9 on G3 iMac with new Hard Drive...running OS X

Situation:
I recently changed out my hard drive on my G3 iMac DV Graphite....12GB to 100GB. Had difficulties, posted a question on the iMac board and was successfully directed to load OS 10.3. I'm starting with a "clean" hard drive (will add backed up stuff from my G5 via firewire once all is well). I still have a few of my kids games that require the classic environment, so I would like to reinstall OS 9 without having to reinstall OS X, or go through a complicated set of steps to reconfigure the drive. So here's the OS disks at my disposal: original OS 9 restore disk and OS 9.2.1 disk. (I first, tried reinstalling from the 9.2 disk, it started rebuilding my destop...which to my untrained brain meant sending OS X into the nether world, so I quickly aborted.)
Questions:
What's the best way to reinstall OS 9 in my case?
Which disk is better for the reinstall?
If using the restore disk, which of the restore choices is best for my case (restore in place or saving orginal items)?
I have read similar threads and there is mention of this article:
http://docs.info.apple.com/article.html?artnum=106294#m9
According to this article, if I encounter problems with OS X I need to reinstall OS X and go through some significant steps. Advice on dealing with things mentioned in this article?
Thanks for the advice. MJC
G5 dual and iMac DV Mac OS X (10.3.9)

Hi, MJC -
You should have no problem installing OS 9.2.1 on that machine, even though it already has OSX on it, provided your OS 9.2.1 Install CD is a retail one (white label, large gold 9). The two OS's are designed to co-exist on the same volume.
All you should need to do is to boot to the OS 9.2.1 Install CD, then do a Clean Install of OS 9.2.1. Note - a Clean Install is safe, it will not remove anything.
Article #58176 - Mac OS 8, Mac OS 9: Performing a Clean Installation
<hr>
Not sure why you initially experienced the OS 9 installer wanting to rebuild the desktop - that's not one of the things it is designed to do. However, rebuilding the desktop should not affect anything - and is often a cure for some problems.
On the other hand (just did some thinking) - the 'desktop' in this instance is an invisible file (actually two files, but we refer to them as being one) used by OS 9 to track certain things, such as custom icons, what app to use to open which file, where things are, things like that. OSX does not create such a file. If the fresh hard drive had never been exposed to OS 9 previously, then when you booted to the OS 9 Install CD OS 9 would need to create a new desktop file for the drive. I suspect that OS 9 has no built-in message for 'creating desktop file', and used its 'rebuilding desktop' message instead (to let you know what it was doing).

Similar Messages

IPad won't sync with old iMac with new hard drive.

The new drive recognizes the iMac, and the photos on the iPad were successfully imported into iPhoto, but 2 home videos on the iMac will not transfer. I have tried to manually drag and drop, different cords and ports, over wi-fi, etc... The Summary box says the iPad has never backed up to this computer, but when I try to do that, it tries and then stops with no error message. The Movies tab has the two videos I want to transfer, but the sync button is gray. I have hard rebooted the iPad and restarted the iMac. Also deauthorized and reauthorized the iMac. I suspect that somehow the iPad is not recognizing the new hard drive. Is that possible? Any suggestions? Thank you for your help!

I don't mean the latest version of iOS. I mean the latest version of iTunes on your Mac.
Open iTunes on your Mac. Click Help and then Check For Updates

IMac with new hard drive hangs on boot

My 2010 iMac was covered under the hard drive recall. The hard drive was replaced, and the Time Machine restore went fine--until the end, when it hung up. I rebooted, to attempt it again, and now the computer hangs on the startup screen. I cannot get it to load in Verbose mode, and I cannot get it to load using the original startup disk. Please help.

Hi Carla,
Yikes...
Does it boot to Single User Mode, CMD+s keys at bootup, if so try...
/sbin/fsck -fy
Repeat until it shows no errors fixed.
(Space between fsck AND -fy important).
Resolve startup issues and perform disk maintenance with Disk Utility and fsck...
http://docs.info.apple.com/article.html?artnum=106214

Will Time Machine with Leopard Sync With New Hard Drive and Snow Leopard?

My computer is a 20" iMac that I bought in late 2008. The hard drive had trouble so Apple repaired with disk utility. Week later, more trouble so they did full hard drive erase. Data was backed up on Time Machine, 500GB also bought in 2008. After full hard drive erase, and reinstall of basic software, upon reboot, computer would power on then immediately off. It doesn't get past white screen. They advised a new hard drive install is needed.
A computer friend can install a hard drive just fine for me. However, I do not have the Leopard install disc. He could do it with Snow Leopard but I am scared. I'm afraid because my Time Machine last backup was with Leopard, not snow Leopard. I do not have my application discs with me, they are in storage in another state. Thus, if upon adding replacing hard drive and installing Snow Leopard my computer won't be able to sync FILES and APPLICATIONS from Time Machine because its on Leopard I will have a problem.
How can I either 1)Get a Leopard install disc and do that with the new hard drive install OR 2)make sure that a Snow Leopard install with new hard drive won't prevent my Time Machine from being able to install the saved FILES and APPLICATIONS if I don't have original APPLICATION (ie Aperture, Photoshop) with me? Thanks for any help you can provide.

thetrudz wrote:
A computer friend can install a hard drive just fine for me. However, I do not have the Leopard install disc.
Hi, and welcome to the forums.
That Mac should have come with Leopard. If so, call AppleCare. They'll send you replacement discs for a nominal fee.
Once this is sorted out, make a 8-10 GB partition on an external HD or your internal HD, and use the Restore tab of Disk Utility to copy the Install disc to that partition. Then you can boot and run from it instead of the physical disc. It will boot and run much faster, too.
He could do it with Snow Leopard but I am scared.
If he does, and doesn't provide a retail Snow Leopard disc, you must buy one ($29). It's a violation of the license to share software, and you'll need a SL disc to do things like restore a Snow Leopard backup, or the Snow Leopard Apple apps, or repair the internal HD.
Your best bet is to stay with Leopard, at least until you have access to your 3rd-party software discs.
What you can do, however, is borrow his Snow Leopard Install disc (assuming it's a white Retail disc, not a gray one that came with his Mac), and use it to do a full system restore from your backups. That's not a violation of the license, since you don't install or use OSX from that disc; you just use the Installer utility on it to restore the Leopard OSX and all your data from your backups.
See #14 in [Time Machine - Frequently Asked Questions|http://web.me.com/pondini/Time_Machine/FAQ.html] (or use the link in *User Tips* at the top of the +Time Machine+ forum), for details.

HT2729 Digital Copies to my IMac with external hard drive, then on my MacBook Pro I can see the movies, but if I close out my IMac, I can't access my movies on my laptop??? Can anyone help me out here? Thanks.

I have my itunes stored on my external hard drive of my IMac.
I have started to put my Digital Copies to my IMac with external hard drive, then on my MacBook Pro I can see the movies, but if I close out my IMac, I can't access my movies on my laptop???
Can anyone help me out here? Thanks.

I have my itunes stored on my external hard drive of my IMac.
I have started to put my Digital Copies to my IMac with external hard drive, then on my MacBook Pro I can see the movies, but if I close out my IMac, I can't access my movies on my laptop???
Can anyone help me out here? Thanks.

TS1600 I received a 2008 Imac with erased hard drive. I have the two discs to install OS X but when it tries to boot just comes up Mac OS X cannot be installed on this computer. Is there anything I can do to get this running

I rceived a 2008 Imac with erased hard drive. They gave me the two install discs but it keeps coming up cannot install OS X on this computer.
Is there anything to do. Thanks hopefully

Well, Apple would probably point out that what you are trying to do violates the EULA.
Technically speaking, however, the issue is that the install/restore DVDs that ship with Macs do not carry all the drivers, or even all of the various versions of libraries that support all of the various models of Macs. The come-with-your-Mac disks are different than the retail versions of the OS (also, the come-with-your-Mac ones bundle iLife, which the retail ones don't).
Because the come-with-your-Mac disk contains only the drivers specific to that generation and model line of Mac, it contains a stub of code that verifies that your hardware matches the driver set on the install/restore DVD.
Your friend has a different model of Mac, with different hardware, so her install/restore disk won't work in yours. Solution: go get the retail boxed version of Leopard.

How to set up an iMac g3 with new hard drive

I have an iMac g3 grafite se, the person before me forgot their admin password so I bought a new hard drive for it but I don't know how to re install the software I turned the iMac on and I just had a grey blank screen would really appreciate some help please I have an iMac software install disc which say Mac OS version 9.1, I have iMac applications cd, all 4 iMac software restore discs and they say Mac OS version 9.1 , 10.0.3 and a Mac OS X version 10.0.3

I have iMac applications cd, all 4 iMac software restore discs and they say Mac OS version 9.1 ,
Boot from the gray system restore disk marked "Disk 1" by inserting the disk and then restarting while holding the C key. It takes a couple of minutes to boot from a CD or DVD but, when complete, you will have access to an installer. I'd install OS9 first to see if the comptuer works.

Restoring a home folder backed up using the Backup application (with the umbrella) to a new hard drive running Snow Leopard

I was running OS X 10.4 Tiger on a 2006 iMac. My home folder is backed up on a My Passport 500GB USB external drive using Backup (the original application that came pre-installed with the orange umbrella symbol).
I was intending to upgrade tp Snow Leopard so that I could sync a new iPad with iTunes and iPhoto so had ordered the disc from Apple and was waiting for it to arrive.
2 weeks ago my hard drive stopped - and I took the iMac to a support store (I am currently in Belgium and there is no Apple store here). They confirmed the hard drive was dead and as I had my receipt for Snow Leopard installed this for me.
Now I am trying to restore my home folder but the new OS does not recognise the data. I can see there is nearly 200GB of data on the external drive - but the folders contain small files call backup.log, backup.log.gz, InfoPlist.stringscat, stat0..... all under 5MB.
Applecare told me they did not know about the Backup application and it was not theirs..... then suggested I tried migration assistant.
With migration assistant, I just get a spinning wheel at the initial 'select your disk' page - spinning now for more than 8 hours. I checked on line and the only advice I saw was to use firewire - but my external drive works with the new high speed USB...
Can anyone help?

Thank you for your help - I now have a solution ...in case it helps someone else.....
...I also think I may have been a bit silly...
The solution - thanks to a great guy in Apple Support USA - thank you Matt!!
first I partitioned my hard drive using disk utility - and set 235GB for a separate install - I called it Tiger install disk
this allows your hard drive to act as 2 totally separate systems (by holding down the option key when you start the computer you can choose which you want)
then I reinstalled Tiger from my original discs onto the new part of my hard drive
then I read my backed up home folder and copied it to the Tiger system on the new hard drive section
then I rebooted and started up Snow leopard on the original part of the hard drive
then I used migration assistant to transfer from the 'Tiger install disc' drive - it was recognised by migration assistant
Where I think I may have been a bit silly
I am now not sure if the orginal backup was always visible in Snow Leopard
in Tiger I found backup.sparseimage - which when double clicked opened up my home folder
now that I have istalled Tiger as well - I can also find this in now Leopard... ...so maybe I just hadn't opened all the original folders on my backup disk...
...but for sure migration assistant could not read the backup copy

Wanting to upgrade Sawtooth 400 with new hard drive and more memory

Have been reading a lot of posts today on the above upgrades. Am quickly getting confused on all of the info, especially on the hard drive upgrades...
Purchased my Sawtooth back in Dec. 2006 on eBay. Should have been using it all of this time, but my budget wouldn't allow me to put more memory (it's got 256MB now) and a new hard drive in it. Tired of seeing it in the way just sitting there!
The G4 has OS X 10.3 on it. Would like to upgrade to Tiger. Is there a firmware update that needs to be done before upgrading to Tiger? I know that 256MB of memory really isn't enough for Tiger. I thought about getting at least a 512MB stick to make the total memory 768MB (wish I could afford to max the memory). Others have said that OWC and Crucial have good quality memory.
The System Profile shows that it has 10 GB and 60GB hard drives. Imagine the 10GB one is the original. The 60GB was probably added on later. Don't know how old the 60GB is. That's one reason I'd like to replace it to at least a 120GB drive, so I can start fresh without worrying about the 60GB dying. (Do understand that any drive can die; new or old...) Have read about the 128GB size limit on my G4. Don't think I'd use most of the 120GB, so I'd like to stay with that size. Budget won't allow to install a PCI card to allow larger drives anyway. Should I remove the 10GB one as I don't think I'd be using it at all?
I installed a Seagate 120GB Barracuda Ultra ATA/100, 7200RPM, 8MB Cache, 3.5" drive (new, got it on eBay for $40!) in my iMac G3 400. Would like to find the same kind of drive for the G4, if it would work. If the same drive would work in the G4, does anyone know where I could purchase one? Will look on eBay etc. in the meantime.
Thanks for any advice and/or suggestions.

Got the Seagate HD installed, PRAM battery replaced and missing PCI cover replaced. Sure wished that I had the extra memory to install now, but I haven't had the chance to order it yet. I know it's easy to do, but I'm going to have to move the Mac to the table and it's heavy for me to lift (bad back).
Anyway, I started to install OS 9 on the Seagate and have hit a stumbling block! Didn't have this problem when I replaced the HD in my iMac, but it was only a 120GB drive (it needed the firmware updated).
I've looked at other posts on installing OS 9 and even on Apple's support documents and can't find what I exactly need to do! Am getting more confused about it the more I try to find the right answers... Hope one of you can help me some more.
I was able to boot the Mac up from the CD (it's the white one with the orange "9" on it). I clicked on the "Mac OS Install" icon, click on "Continue" (on the "Install Mac OS 9) dialog box, and then it says: A valid destination volume can't be found. To continue the installation process, mount a valid volume for software installation." The destination disk options is grayed out. I then clicked on the "Utilities" icon, and then the "Drive Setup" icon. It shows a list of drives and I clicked on the <not initialized> Type ATA, Bus 2, ID 0, LUN 0 and clicked on the "Initialize" button. Then it says: New Partitioning: 1 Mac OS, Initialization Options: None. If you click on Custome Setup, it says that the Partioning Scheme is "Current Volume," 131072MB (131GB?), under Volume Info Type it says Mac OS Standard. The "OK" button is grayed out. If you click on "1 Partition" on "Partitioning Scheme," then the Volume Info Type says "Mac OS Extended, with Size showing 131071MB. The "OK" button is not grayed out. I didn't go any farther with the OS 9 installation, as I don't know what the heck I'm doing! Don't want to mess something up. Do you or anyone who has helped me with this posting, know the steps I should take next? The Seagate Owner's Manual says if you have a system that can't read the entire 160GB, to just partition the drive for 137GB for now if you don't want to add a PCI controller card etc. For now, all I want to do is use the 128 or 131GB (according to what it says) of the 160GB drive without using a different card or software to recognize all of the 160GB. Do I just do one partition or two... and what else? I'm completely lost...
Sorry for the long post, but had to write down the steps I took, so someone could tell me what to do next.
I don't think you have to worry about PRAM settings; they pretty much take care of themselves - and regenerate when they have to. The time to think about PRAM is when you introduce new hardware and catch your Mac expecting same old, same old, and it isn't.
It was kind of hard to get the old PRAM battery out of its holder. I pryed the right side retainer tab just a bit with a screwdriver to get it out. Noticed that one part of the retainer at the base was cracked! Hope I didn't do that! Put some super glue on the crack (was on the outside only from what I could see). Cleaned off the battery contacts with a pencil eraser and dry Q-tip before installing the new battery. It seems to stay in place even though with the side retainer cracked. If the side retainer would break off the next time the battery would need replacing, would the battery contacts hold it ok? Or would the whole logic board have to be replaced? I put a SAFT 3.6v LS14250 battery in it. The old one was a SAFT LS14250C. Hope the "C" at the end doesn't mean anything.

How to Replace existing Hard Drive with new Hard Drive, while keeping old files

Hi All,
I have recently replaced my hard drive on my Macbook Pro, with a new hard drive. The old Hard Drive was 160 GB, while the new one is 320 GB.
What I did before replacing it was clone my hard drive using "SuperDuper". I cloned it to the new hard drive and then simply removed my old hard drive and installed the new one with the clone on it. Then I booted it up and began running it. In fact I am using it right now.
My questions are:
Is this a good practice?
Will this work, without problems, indefinitely?
Is this the prescribed way to upgrade ones laptop hard drive?
The reason I did it this way was because I upgraded to Mountain Lion via the apple store download and I do not have the CD for the OS. So I figured if I could make a bootable copy, that might work. So far everything seems fine, but I really just want to know if this will last for a long time. I plan on also making a partition with Windows on it also, so I was wondering if anyone can comment on that too.
If anyone can comment or give any advice on this topic I would really appreciate it.
Thank you very much!
Cheers.

Every thing is fine except Super Duper does not clone the recovery partition. If you start your MBP holding the OPTION key, you should see the internal HDD and the ML recovery partition.
You can reinstall ML or reclone using Disk Utility>restore.
Ciao,.

IMac 233 new hard drive-slooooow!

I installed the new hard drive, after much agony & tweaking, partitioned it, gave the first partition 7500. I also put 256 + 168 MB ram into it.
Installed the basics (OS 8.5) that came with the computer; restarted. Finally got it to boot up, but it takes a good 15 minutes of sitting there with the blinking question mark. So once it does come alive- very slow to open anything, speakers did work. Tried a music CD, player opened, but now, no sound.
I am doing this so my 8 yr. old grand daughter can have her own little iMac to play some games & type. But I do hope to be able to up grade the OS without so many problems.
Please help.
Jacquelin

Have you checked to see if the RAM you put in is meant for her model iMac (you never told us the model)?
Also, Apple doc.#58042 on flashing ?.
DALE

Can't recover software to Satellite L745-S4210 with new hard drive

Was using the laptop when it completely froze. Used power button to force shutdown. When restarted, hard drive was making a ticking noise and got this error message:
PXE-MOF: Exiting PXE ROM
No bootable device - insert boot disk and press any key.
Setup utility did not show the presence of a hard disk drive. Assumed that hard drive had gone back.
Purchased a new hard disk drive at MicroCenter. Toshiba 2.5-inch SATA 640GB drive, the same drive that came in the laptop from the factory. Also used the opportunity to upgrade RAM from 4MB to 8MB.
Installed new hard disk drive and new memory. Ordered the Recovery Disk set from Toshiba.
At startup, new hard drive doesn't tick. Setup utility sees a Toshiba hard disk drive. Got the "no bootable device" message. Inserted the first disk of the Recovery package and held down the C key, per instructions. System began to respond but then switched to Windows Boot Manager screen.
Here are the error messages:
File: \Boot\BCD
Status: 0xc00000e9
Info: An unexpected I/O error has occurred
Reseated both new hard drive and new RAM. Tried again with same result. Reinstalled old RAM. Tried again with same result.
Now at a wall. What has gone wrong? Is the new hard disk bad? Bigger problem. The unit is outside the factory warranty.
Any help is appreciated.

File: \Boot\BCD
Status: 0xc00000e9
Info: An unexpected I/O error has occurred
I don't understand how that could appear when you boot from a recovery disc with a new hard drive in place. It implies there is something on the drive.
0xc00000e9 "Boot\BCD" "unexpected I/O error "
Maybe try another drive?
-Jerry

SYNCING IPHONE AND ITUNES WITH NEW HARD DRIVE

My hard drive crashed on my mac book pro and I had to replace it with a new one. I'm trying to get new music onto my iphone that I purchased thru Itunes, but it is saying that only one computer can be used. This is the only computer that I used for the library, but now there is a new hard drive in it. Obviously I do not want to lose the music on my iphone and I'm curious how or if I can get around the message saying that if I want to sync to a new computer that it will erase the prior library. Please advice because I would like to update my iphone as soon as possible.

Connect the iPhone and choose Transfer Purchases from the dialog box which appears or the File menu in iTunes. Do NOT sync the iPhone until you've completed this task.
(52902)

Recovery discs do not work with new hard drive

Hi I have come here desperately seeking help as I am not too knowledgeable with the workings of computers and I have spent an incredible amount of time just trying to get my laptop to some level of functionality. I purchased a HP Envy and it had a corrupt hard drive which would not work from day one, laptop was new. After a year of constant pressure on HP they finally decided to replace it and let me choose any laptop so I went with the Beats Envy 14 as it was the best one offered from the selection. Low and behold the thing would not work properly from day one, again my brother who is much more of an expert said that there was definitely a hard drive issue so for the past 3 years I have put up with a computer that constantly crashes with BSOD, where I have lost data on numerous occasions (only so often I can back up), that I have had to constantly reset the thing using HP recovery discs, and that generally cannot cope when performing multiple tasks. HP are most certainly shocking builds from my experience. Then just last week the hard drive just craps itself and the laptop no longer will boot up. I took it to a guy to get it at leYst working again so he has installed a new hard drive but with an old version of Windows 7. I want to go back to the Windows version I was akin to on the HP recovery disk , and essentially have it all set up as before except for now having a workable hard drive however I get the message: "This computer is not supported by the System Recovery Discs.You will not be able to continue to recover this system with these discs.Error: 0100 - 3385 - 3078" I also tried out of interest to load my old Windows 7 disc I had and XP but had no success. Tried booting from startup etc and various things suggested on help forums. Please tell me I am not stuck with this version of windows. Whilst the discs included Windows 7 it was a totally different version, this home premium one is terrible. Any help/advice would be gratefully received. Thanks

no they were both 500gb. I read about that already, I heard about creating a partition for recovery etc but this is all a bit above me , as I said I am not very technical when it comes to the working of a computer. These discs worked perfectly before but now with the new hard drive will not load at all. I essentially hate the Windows Home Premium verions the guy who fixed it put on, whilst the discs had Windows 7 on them the icons were way smaller, the desktop neater, the buttons different, everything was a lot more modern and I was used to it. This version looks like something from the 90s, have to constantly adjust size of Mozilla when browsing as it is huge. I have my own version of Windows 7 on another disc but the hard drive will not let it load either........considering waiting for Windows 10 but again unsure if this new hard drive will even let that update Thanks

MacBook Pro won't boot with new hard drive, but a different MacBook Pro will

So here are the details. My friend and I both have 13-inch Mid 2010 MacBook Pro's. Same processor and specs since they were purchased at the same time, but originally had 250 GB hard drives. His hard drive failed and needed a new one. Put a 500 GB Seagate Momentus 5400.6 in his computer, and tried using a flash drive with "Install OS X Mavericks" on it to install Mavericks on his new hard drive. No matter what, it wouldn't install. I finally was able to install OS X 10.9.4 on it by connecting the new hard drive to my computer with a USB hard drive enclosure. I put the hard drive back inside his computer and it wouldn't boot (stuck on the gray screen with apple logo and a spinning wheel). I then attached to the hard drive to his computer externally with the USB enclosure, and then it booted and worked perfectly.
So, it seemed like the problem was with something inside his computer, but then I switched our drives, and that doesn't seem to be the case anymore. I put my original hard drive into his computer, and his new hard drive into my computer, and they both booted and worked perfectly, so I have no idea why his computer will not boot with the new hard drive internally.
To summarize, his computer boots with: 1) new hard drive connected externally (won't work if it's internal), and 2) my hard drive internally
but my computer boots with: 1) new hard drive connected externally AND internally, and 2) my hard drive internally.
Both hard drives have OS X 10.9.4 installed
If anyone has any idea what's causing this and how to make his computer work with the new hard drive internally that would be greatly appreciated.

So after switching the internal SATA cables from each computer, now we have
His computer, with my SATA cable:
1) Worked with every hard drive!
My computer, with his SATA cable:
1) Works with 1 TB Toshiba hard drive
2) Works with 500 GB Seagate hard drive
3) Works with my original hard drive
4) Flashing folder with question mark with his old hard drive
So it turns out you were right! Definitely had something to do with the SATA cables. But it's still strange that mine was able to boot with all the hard drives except the one that was originally in his. So it seems like it was some combination of his SATA cable and something else, since when his SATA cable was in his computer only 1 hard drive (my original) worked, and when it was in my computer, 3 hard drives worked. But at least its working, and I'm just gonna keep our SATA cables switched since that seems to work out fine

Reinstall OS 9 on G3 iMac with new Hard Drive...running OS X

Similar Messages

Maybe you are looking for