Reinstall/Repair 9i and other tools

Had a hard drive crash on a Win NT 4.0 system, SP-6. Entire O/S was wiped out and had to be reinstalled. My Oracle 9i installation was on another drive, and is completely intact.
Is there a way to reload the various parameters of the Oracle installation back into the NT registry, environment, program groups etc, without having to start from scratch? Does the installer have a way (or another program) to analyze the various files and directories found with Oracle and recreate everything?
The NT emergency disk was useless, so no registry entries were saved.

All I can say is... Boy am I glad I have an ATI card that just works (and that's including Photoshop CS4/CS5 32/64 bit)!
One thing I'm not sure was mentioned above... Try changing your Advanced OpenGL preferences to "Basic" or even turning off OpenGL to see if it affects the issue. Also try disabling the Show Overlay function in the CLONE SOURCE palette.
Best of luck getting to the bottom of these problems, guys. If they run on too long, consider switching brands.
-Noel

Similar Messages

Error in Removing and reinstalling iTunes, QuickTime, and other software components for Windows Vista or Windows 7

Hello Everyone,
I am a regular user of I-tunes but recently i dont know why but I got some error in Launching I-tunes. So as recomonded by "Removing and reinstalling iTunes, QuickTime, and other software components for Windows Vista or Windows 7" section. I started removing the products. But after removing Quick time, I tried to remove Apple Software Update but while uninstalling it gave error that "There is a problem with this Windows Installer package. A program run as part of the setup did not finish as expected. Contact your support personnel or package vendor." and the uninstall rollbacks.
Please send me a feasible solution to this problem.
Thank You.

Uninstalling the iCloud control panel should allow you to do that folder deletion.

In Adobe Flash CS6, I have a blue box appearing around lines drawn with the line tool (and other tools like brush etc). I can't figure out how to disable.

In Adobe Flash CS6, I have a blue box appearing around lines drawn with the line tool (and other tools like brush etc). Whenever I try to use a tool, a blue box appears around the line and I have to double click it to manipulate it, which opens just that line in a semi burred screen where all the other objects are semi-grey in the background. I can manipulate this line in this screen but nothing else at that time which I could do about 5 minutes ago. For exampe, I no longer can join up 2 lines drawn by the line tool together. For some reason this started randomly (probably due to a accidental shortcut combination) and I just can't put it back to what it used to be. I have inserted a video hopefully showing what I mean. Any help would be appreciated.

Thank you - Just what I needed

Suddenly in the middle of editing a large project the cropping and other tools stopped working. Did i hit some key or something accidently?

suddenly in the middle of editing a large project in Aperture the cropping and others tools stopped working. Did I accidently hit something to do that?

Maybe you hit the "p" key?
Then "Quick Preview" will be turned on and prevent editing. Hit "p" again or use the "View" ->"Quick Preview" menu entry.

Photoshop CS4 64 bit - Clone Tool does not work (and other tools)

Hello.
I have been using Photoshop for many years going back to v5. I had used Design Prem Suite CS4 for the past year on an XP machine. All worked fine. I recently moved to WIndows 7 (64 bit) to get the add memory usage. CS4 installs both 64 and 32 bit versions on Windows 7 64 bit. So far all good. Any help would be GREATLY APPRECIATED. I am at a dead end and really have no confidence in getting Adobe's help.
My tools are working erratically, especially the cloning and healing tools. I can't even use Photoshop in its current state and this has been going on now for weeks, no help from Adobe on my lates support ticket post.
I canonly say that the clong tools is all over the place including but not limited to:
* When I sample and then click to stamp, lines shoot across across the image as it I clone a line not a single sample area. These stamps can be the length of the enite image.
* when I sample, then click to stamp, some the stamps occurs on some other part of the image.
* when I sample and the click to stamp, nothing happens. I have to click several times.
* when I sample and then click to stampl, the prior location I stamped has the clone applied
There are more, but this is to just give an example.
Notes:
* I have trashed preferences at least 20 times and the problem immediately reappears
* The problem happens in both the 32 bit and 64 bit version of PS running in Windows 7 65 bit
* The problem occurs with OpenGL tuned on and off
* I have installed the latest PC patch 11.0.1
* I have updated my latest NVidia drives. They are current.
* I uninstalled Photoshop (kept the rest of Suite) and that did not work, and the same problem reappeared. I am not uninstalling the complete suite but the reinstall has error (that is a separate issue)
* I have triple monitors running off 2 GeForce 9800 GT cards. These worked flawlessly before upgrading to the Windows 7 64 bit configuration. When I upgrades, I replaced the processor, motherbaord and moved to 12 GB ram. The graphic cards are the same.
Other tool issues:
* I have similar problems with the healing brush
* sometomes the text tool acts strange. I will click to enter text and a large area opens to enter text instead of just the cursor positioned ready for text. Then other times it works normally.
* the move tools sometimesacts strange. For example, if I try to move some test, the text jumps and moves of the image and I have to find it to drag it back on the image.
Thanks in advance

All I can say is... Boy am I glad I have an ATI card that just works (and that's including Photoshop CS4/CS5 32/64 bit)!
One thing I'm not sure was mentioned above... Try changing your Advanced OpenGL preferences to "Basic" or even turning off OpenGL to see if it affects the issue. Also try disabling the Show Overlay function in the CLONE SOURCE palette.
Best of luck getting to the bottom of these problems, guys. If they run on too long, consider switching brands.
-Noel

How do I upload Adobe Reader 9, Adobe Acrobat XI Pro, and other tools with the Pro onto my new computer?

     Since I am already a customer of Adobe, I need to know how to upload Adobe Reader 9, Adobe Acrobat XI Pro, and the other tools that go with both programs onto my new Windows 7 HP computer without having to fill out a new customer form or without having to pay for another Adobe membership as a new member? I need to know what to do step-by-step so that I can upload my Adobe reader 9, Adobe Acrobat XI Pro, and the other tools for the Reader and the Acrobat XI Pro.
     You may send the step-by-step instructions to my e-mail address of [email address removed by host].
     Thank you!
Dean W. Ballew

I have been trying to start my subscription again for my Acrobat XI Pro and for the annual subscription of the PDF Export for Word and Excel. The PDF Export expired according to my subscription list, but, I think that I had cancelled my Acrobat XI Pro of $ 29.99 monthly, so, I am wanting to presubscribe for it again, but, when I try to put my Code in for my Debit Card, it will not register with your company.
So, I do not know what to do to get it back again with my monthly and annually subscription payments for PDF Export and for Acrobat XI Pro. I have already downloaded the Adobe Reader XI onto my computer so I am set for that product. I just do not know what to do about the PDF Export and the Acrobat XI Pro to be able to get them started once again.
Dean W. Ballew

Sol 9/cc not working for gtk+-1.2.10 and other tools

Hi,
OS: SunOS Release 5.9 Generic
System type: i86pc
Forte 6.2 Developer Tools License
I have an older version of gtk+ (1.2.10) which doesn't configure, with following error message;
# ./configure
creating cache ./config.cache
checking for a BSD compatible install... ./install-sh -c
checking whether build environment is sane... yes
checking whether make sets ${MAKE}... yes
checking for working aclocal... missing
checking for working autoconf... missing
checking for working automake... missing
checking for working autoheader... missing
checking for working makeinfo... missing
checking host system type... i386-pc-solaris2.9
checking build system type... i386-pc-solaris2.9
checking for ranlib... ranlib
checking for gcc... no
checking for cc... no
configure: error: no acceptable cc found in $PATH
I have a similar error for nessus-core2.0.9. Although when I configure other tools, such as gtk+-2.2.4, I have no problem. It checks for cc and finds cc.
I have the following $PATH ..
PATH=/opt/SUNWspro/bin/cc:/usr/ucb/cc:/usr/ucb:usr/local/bin:/usr/local/sbin:$PATH:/opt/SUNWspro/bin/cc:/usr/ucb:/usr/ucb/cc:/usr/ccs/bin
Can someone please help?

PATH=/opt/SUNWspro/bin/cc:/usr/ucb/cc:/....The PATH variable must not contain the pathname for individual executables, it must contain the names of
directories that should be used to find executables.
Instead of adding /opt/SUNWspro/bin/cc to the $PATH, add the directory /opt/SUNWspro/bin
PATH=/opt/SUNWspro/bin:/usr/ucb:/....
Another problem: PATH contains "usr/local/bin" (NOTE: without leading / slash!), this probably needs to be
changed to "/usr/local/bin"

Can't Repair Permissions and other issues

Just updated to 10.5.2 and started having some video problems. The laptop won't wake from sleep, or if it does, the screen may go blank again. Also, upon waking sometimes, the mouse seems sluggish almost as if there is a remote user. Tried repairing permissions and can't get it to repair permissions. Also, when I switch users or try to authorize installations, it tells me the user name or password of one of the administrator's is incorrect and I know it's not. Very strange things.

Welcome to Apple Discussions!
Did you backup your data before updating?

Indexing Issue : Idc Analyzer and other tools

Hi All,
I am facing some indexing issue with my ucm instance. Some of the files get stuck in wwGen Revision Status, some show “up to date” in index, but really are not until a re-index
happens, etc.
I used IDCAnalyzer to check the indexing issues but during analysis i got only an error pop-up saying "Error checking index" with no details in log.
Are there any additional arguments/settings which can be used to get the details. Otherwise, this tool doesn't seem to be of much help in this case.
Which are the other tools that can be used to check and correct the health of index?
How can we purge unneeded revisions, history, and other in UCM to “clean up” and remove bloat (like archiver etc.)
Note: I am using ucm 11g with SSXA.
Edited by: PoojaC on Aug 1, 2012 10:26 PM

Hi ,
Analyzer tool should be used when there is a mismatch in the weblayout / vault files which causes indexer , archiver etc to fail .
Read more about this from the following links:
http://docs.oracle.com/cd/E23943_01/doc.1111/e10792/e01_interface.htm#CACFDIID
http://docs.oracle.com/cd/E23943_01/doc.1111/e10792/c03_processes.htm#sthref268
Hope this helps .
Thanks
Srinath

Paint bucket, smudge and other tools missing

Sorry If I am completely stupid, but the last version I used was 3.0
Ok big problem I am so frusrated I can barely sit here anymore. I am looking at all my tools on the left hand side. I get to the tools by going to window-> tools out of all the tools, there is no smudge or paint bucket. who knows how many other tools are missing. so i went to help and find and typed in smudge and paint bucket and nothing.
I googled cs4 paint bucket and smudge and apparently there is such options for cs4. but there are NO icons in the tools. what do i do???

Oh i see, I hold down option and click blur and it will change to smudge and i hold option and click gradient and it will change it to paint bucket! Wow thank you soooo much! I have no clue why they didn't put that in help. Thanks!!!

Difference between XML Publisher and Other tools like Aventx

Hi,
Please bear with my newbie question. From all the XMLP documentation that I have read, it seems like XMLP is the tool that I would need to distribute my ERP information either through print/fax/email etc. However, I have also been hearing about tools like Aventx which is a layer above XMLP and helps in delivering documents through fax/email etc.
What basically is the difference between XMLP and these other tools? Can I not just have XMLP sitting on top of my ERP and have my documents delivered without investing in these other 3rd party tools?
Thanks,
itzmey

Hi Itzmey
THe short answer is yes you could avoid the 3rd parties but, there is always a but. XMLP with extract the data, format the data and generate the ouput all completely integrated with the rest of the Apps techstack. However for the delivery you are going to have to write some custom code to get the documents out of the system i.e. we have not integrated the delivery of docs with the conc manager yet ... no I dont have a timeline at the moment. I wrote a series of articles on the blog about delivering from EBS http://blogs.oracle.com/xmlpublisher. Its not that tough but its a custom solution.
AventX and others fill that gap we have admirably. Yes, its a thrid party solution but its a very well thought out and integrated solution that they will support you on, etc.
So its up to you, custom or third party.
Regards, Tim

TS3297 I have installed, reinstalled, repaired, retarted and followed all trouble-shooting tasks; Now I am getting "Apple Supprt Application not found: error 2(Windows 5). Please uninstall and reinstall itunes. I have done that. It is listed in my progra

I am trying to install itunes on my computer (Windows Vista). After initial instillation I got an error 42404 A required itunes componenet is not installed; please repair or re-intall itunes and error 50, cannot access itunes store at this time. Please try later. I have done that multiple times; uninstalled all components, reinstalled all components, repaired all components, restarted my computer. I have changed firewall settings to allow acess to all of the apple components. I have made sure the required ports are open. All of the components are showing on the installed programs section of my control panel.
I am now getting an error message that says that Apple Support Application is not found error 2 (windows 5). It is listed in the installed programs and I have repaired it.
I am out of options. And help would be appreciated.

'The installer has insufficient privileges to modify this file C:\Program Files (x86)\Common Files\Apple\Apple Application Support\Web kit.resources\inspector\Images\Spinner Inactive Selected.gif.'
That one's consistent with disk/file damage. The first thing I'd try with that is running a disk check (chkdsk) over your C drive.
XP instructions in the following document: How to perform disk error checking in Windows XP
Vista instructions in the following document: Check your hard disk for errors
Windows 7 instructions in the following document: How to use CHKDSK (Check Disk)
Select both Automatically fix file system errors and Scan for and attempt recovery of bad sectors, or use chkdsk /r (depending on which way you decide to go about doing this). You'll almost certainly have to schedule the chkdsk to run on startup. The scan should take quite a while ... if it quits after a few minutes or seconds, something's interfering with the scan.
Does the chkdsk find/repair any damage? If so, can you get an install to go through properly afterwards?

My illustrator free trial does let me access the paint brush tool and other tools (artboards), is his a glitch or a restriction on the trial?

please help!

refarta,
The following is a general list of things you may try when the issue is not in a specific file (you may have tried/done some of them already); 1) and 2) are the easy ones for temporary strangenesses, and 3) and 4) are specifically aimed at possibly corrupt preferences); 5) is a list in itself, and 6) is the last resort.
1) Close down Illy and open again;
2) Restart the computer (you may do that up to 3 times);
3) Close down Illy and press Ctrl+Alt+Shift/Cmd+Option+Shift during startup (easy but irreversible);
4) Move the folder (follow the link with that name) with Illy closed (more tedious but also more thorough and reversible);
5) Look through and try out the relevant among the Other options (follow the link with that name, Item 7) is a list of usual suspects among other applications that may disturb and confuse Illy, Item 15) applies to CC, CS6, and maybe CS5);
Even more seriously, you may:
6) Uninstall, run the Cleaner Tool (if you have CS3/CS4/CS5/CS6/CC), and reinstall.
http://www.adobe.com/support/contact/cscleanertool.html

Reinstall of OS and Adobe tools nightmare

Group,
I broke down and reinstalled a full reinstall on a machine heavily loaded with adobe tools. The OS had gotten too unstable and just too many glitches every day.
Now reinstalling all my adobe tools is turning into a serious nightmare.
A few of them, Encore2.0 photoshopcs2 (upgrades) so far, and I suspect Audition2 will behave likewise, have insisted on being shown an installed earlier version.
Well PSCS2 actually had a choice of showing a cd-rom loaded with photoshopCS install CD.
But Encore2 doesn't even have that. It simply insists on being shown an INSTALLED earlier version. I couldn't hardly believe this stupidity.
I'm having to install Encore-1.5 in order to install 2.0. Surely Adobe can do better.
What would be wrong with inserting the prior key number? or at least allow me to put the earlier version in the cd to be examined likd PSCS2 did.
Surely adobe team must know that sometimes its necessary to re-install OS from bare metal, yet no provision is made for that. Now these are not some low priced poorly produced pieces of software, but top shelf stuff.
Please someone tell me I have foolishly overlooked some handy way to get this job done without having to waste time installing 2 version s to get 1.

Do you have the upgrade version of Encore 2.0? If so, that's the method it uses to verify the prior version is installed. Just install Encore 1.5, and then you can install 2.0.

I get three icons (IE) using the move tool and other tools as well

I'm using PS CS4 with windows 7and with different tools my pointer shows three different icons, also when I try to resize ctrl+shift it won't resize to scale. I can't figure whats wrong I've even re installed PS. I have a dead line tonight and somthing is messed up please help. Thanks in advance.
Randy

It's a little hard to determine whether you're getting wrong/multiple mouse pointers or what from your description... Can you capture the screen showing the problem, and post it here?
As a first suggestion, check to make sure your video drivers are up to date.
-Noel

Reinstall/Repair 9i and other tools

Similar Messages

Maybe you are looking for