Reinstall Toshiba 3D Bluray Player for Qosmio F750

Dear Toshiba Support team,
I installed the "new" Toshiba Video Player v4.00.6.09 from the download section for F750. After that, the "old" Toshiba 3D Bluray player crashed as soon as I started it. As the new installed "Toshiba Video Player v4.00.6.09 f" did not support 3D Bluray discs and was dated from 2010, I deinstalled it. But the Toshiba 3D Bluray player was still crashing. So I decided to deinstall and reinstall the "old" "Toshiba 3D Bluray player ". Deinstalling was no problem, but reinstalling is not possible as the download file for Toshiba 3D Bluray player from the official Toshiba download section "Toshiba Bluray 3d Player V.1.0.1.299" is only an update file that needs an installed old version of Toshiba Bluray 3d Player.
Dear supprot team, where / how, please, can I get the setup *"full install" files for the Toshiba Bluray 3d Player for F750*? (A complete system recovery by DVD and reinstallment of everything just for this player would not be a good option me and especially my family would like).
Thank you so much for your help,
best regards
Wolferich

Hello,
I am also looking for the full install of Toshiba Bluray Player V1.0.1.299.
I planning to do a clean OS install on my Qosmio F750.
Greetings
Chunky

Similar Messages

  • Can't install the Toshiba HD DVD Player for Windows 7 - 64 Bit

    Notebook: Toshiba Qosmio G40 with windows 7 Ultimate 64 Bit
    I can't install the HD DVD Player Driver from Toshiba for Windows 7 - 64 Bit 4.60.03 from 30/11/09 !
    The installation will be cancel with information that the software can not be installed on this system.

    Problem is that this file you have downloaded is not the player but just an update.
    Usually you should be able to install player designed for Vista and later install this upgrade but, as I can see, Toshiba doesnt offer HD DVD player for Vista 64-bit.
    I presume your notebook was delivered with Vista 32-bit only. Am I right about that?

  • How to make a CD of MP3 songs to play on a Bluray player without ITunes creating separate folders for each album

    I'm trying to make a CD full of MP3 files that I can play on my Bluray player for a long party, but when I burned the disc using ITunes, it created separate folders for each source album, and it won't play.  You have to open each individual album to get the songs to play.
    Can you make a cd that has all of the songs in one folder?

    I'm trying to make a CD full of MP3 files that I can play on my Bluray player for a long party, but when I burned the disc using ITunes, it created separate folders for each source album, and it won't play.  You have to open each individual album to get the songs to play.
    Can you make a cd that has all of the songs in one folder?

  • Qosmio F750 -How to watch movie or smth else in 3D mode?

    Before i've bought this laptop, i saw plenty of clips and read a lot of articles about easy 3d mode when cam is watching for your eyes. Now I cant find any software which can do so. I've found only Toshiba Video Player, but it plays only DVD or mpeg format files, and i want to watch avi format for example. Is it possible?

    > I thought that all F750 models are supplied with glasses-free display.
    http://eu.computers.toshiba-europe.com/innovation/series/Qosmio-F750-series/1108007/
    +It comes with a ground-breaking glasses-free 3D display *or* a TruBrite HD display with LED backlighting and NVIDIA graphics, delivering consistently stunning visuals+
    According to the information on Toshiba pages and other internet pages, there are different Qosmio F750 units which supports different hardwareso always check the specifications of every single model .
    _for example_
    *Qosmio F750-11M*
    Display: type : Toshiba TruBrite FHD glasses-free 3D TFT High Brightness display with LED backlighting and 16 : 9 aspect ratio
    internal resolution : 2D mode: 1920 x 1080, 3D mode: equivalent to 1,366 x 768
    response time rise + fall (Typ.) : 8 ms
    Or
    *Qosmio F750-10N*
    http://za.computers.toshiba-europe.com/innovation/product/Qosmio-F750-10N/1111518/
    type : Toshiba TruBrite HD TFT High Brightness display with LED backlighting and 16 : 9 aspect ratio
    internal resolution : 1,366 x 768

  • Qosmio F750-10N and Win8.1 - haven't been able to get the right BT drivers

    Hi,
    Since upgrading my HDD and installing Windows 8(.1), I haven't been able to get the right Bluetooth drivers for my Qosmio F750-10N.
    If I go through the download drivers section of the site, the drop down boxes for Language and region seem to be faulty so it won't show me any drivers.
    Tried installing a generic Toshiba Bluetooth stack but it doesn't seem to be able to recognise my actual Bluetooth device. Also tried going through the Atheros site without much luck.
    Please could someone help or possibly post a link to a download mirror.
    Thanks very much.

    Hi
    First of all it seems that Win 8.1 is not supported for Qosmio F750.
    Therefore I could be difficult to get BT working
    However, as far as I know the Qosmio F750-10N was equipped with an Atheros AR9285 WLan/BT combo card.
    This means that one module shares the WLan and BT and you need to install the Atheros BT Filter driver.
    Beside the BT filter installation you have to install the Toshiba System Driver for Win 8.1
    This system driver needs to be installed before BT filter driver.
    But as I said: Win 8.1 is not supported for this Qosmio unit and you will not find Win 8.1 drivers in the F750 driver download section.
    But you should try the drivers released for other, newer Qosmio series; i.e. X870
    Good luck

  • Sony Bluray player gets weak signal, rarely able to play Netflix

    Hello, I got a brand new Sony Bluray player for Christmas about 6 months ago.  I have always had connectivity issues with the internet.  My current situation is the worst yet.  I share wifi between myself in a granny unit on the backside of a main house.  The modem/router is new - just went to comcast to switch for the best they have - and is placed by the backdoor so it is as close to my place as possible.  My laptop and cell phone connect to the signal but my bluray still has issues.  I was able to play netflix for the first time last night but it froze every 20 seconds.  The only way to stream without interuption is to play netflix on my laptop and plug it into my tv with an HDMI.  This is annoying however bc the main reason I got the bluray was to avoid this.  How can I rectify this situation?  Booster?  A different kind of unit to operate Netflix and Hulu on - Wii?   Any suggestions would help!  Thanks! ~Kelsey

    If your unit is on the same electrical panel as the main house your best bet would be a powerline ethernet adapter. If not then you could try a wifi extender. http://www.bestbuy.com/site/netgear-powerline-500-nano-ethernet-adapter-kit-white/7394184.p?id=1218844155446&skuId=7394184

  • Qosmio F750 Toshiba applications have stopped working suddenly

    Hi there,
    can anyone help me?
    All toshiba applications in my Toshiba Qosmio F750 have stopped working. Including Toshiba bulletin board, tohsiba blu-ray disc player, toshiba reeltime, etc... I don't know why and when it stopped working... please help me anyone :(

    > I don't know why and when it stopped working
    For us here on this forum is also not easy to understand what is the reason for your problem.
    For that reason I also think best and of course the easiest way to fix all this is OS reinstallation.
    Start to use your notebook with factory settings again. With clean recovery image installation everything will be perfect again.

  • Qosmio G30-E10: No Playback of DVD`s with "Toshiba HD DVD Player"

    Hi all,
    If I try to playback a normal DVD (not a HD-DVD) with the Toshiba HD-DVD Player Software, I get the following message from the HD-DVD Player:
    "This player has no DVD Playbackfunction. Please try an appropriate application for DVD playback"
    HD-DVD Drive has current firmware. HD-DVD Player is on current patchlevel 4.20.16.
    DVD-Playback with InterVideo WinDVD works fine!
    Notebook is a Qosmio G30-E10, with Vista Ultimate (Factory standard).
    Any ideas?
    Thanks in advance.
    Sincerely
    Uwe

    Hello
    Have you ever ask yourself why Toshiba install two players on this HD-DVD notebook? Probably not.
    With short words: HD-DVD player is designed for playing HD-DVD movies only. For watching usual DVD movies use DVD player. For this purposes use WinDVD player.
    Bye and enjoy your great Qosmio notebook.

  • Accidentally un-installed winDVD for Bluray player

    In an attempt to fix a non-existent problem with my bluray player on my satellite, I uninstalled program not realizing that you have to pay for it. The WinDVD program came installed on my computer out of the box. My question is how do I retrieve this program? If I perform a system recovery to out of the box condition off the hard drive, will this program return. I tried system recovery from a prior date but that did not work. I did perform a back-up on dvd's but when i tried that it appears that maybe there is something wrong with the back-up as no matter what disc I install it continues to say please insert disc #1. If anyone has any insight on this I would greatly appreciate it.

    Satellite P775-S7215
    Your downloads are here.
    Sounds like you want the second player below.
       Toshiba Video Player
       Toshiba Blu-ray Disc Player
    And maybe this patch.
       WinDVD BD Patch
    -Jerry

  • Gateway 7500 not allowing connection for bluray player

    I recently installed a new westell gateway 7500 to provide an additional ethernet port for my samsung bluray player.
    Got a green light, full internet connection for my pc but no go for the bluray player. The status shows as connected but i am unable to access the net.
    Have checked and rechecked the configuration of the blue ray player, samsung says that the modem is blocking access
    The firewall is off. Have rebooted EVERYTHING several times.
    Verizon tech support is useless, I have called at least six times over the past two weeks. I have been told that they are not trained on this equipment and that my only recourse is to purchase premium tech support.
    HELP!!!!!!!
    Bill Derbyshire

    no one?

  • Using WRT54G2 for Bluray player

    Hi all- thought I would ask before attempting something that might be impossible? We have a new bluray player- Panasonic BD 60. It has an ethernet connector on the back and claims to access Picasa, Youtube etc. I currently run a WAG200G for my internet connection. I purchased a WRT54G2 hoping i can use it to connect the bluray player to the network. 
    If anyone wants to help advise on the setup, that would be great- ask me what other info is required to work this out!  many thanks in advance...Theo 

    The WAG 200G is established and functioning as the main modem/router. I use it wired for the desktop and wireless for a laptop.
    The WRT54G2 is for the bluray, and that is too far away for wired- I would need to go wireless.
    I keep hearing about Gaming adapters and access points and bridges- which seem to be what I should have got. I guess my question is can the WRT54G2 work as one of these?
    The manual for the blu ray is not hugely useful- but does show it can set the usual parameters like IP address- auto or manual, subnet mask, gateway access, DNS, proxy server settings. I am hoping this means it looks like a standard device to the router and would therefore be ok? 
    appreciate the help! 

  • Is there a BluRay DVD player for the HP HDX 9010nr?

    Is there a BluRay DVD player for the HP HDX 9010nr?
    This question was solved.
    View Solution.

    All laptop drives are a standard size and any SATA Blu-ray drive will fit. Remove the rear mount and bezel from you old one and mount it on the new one.
     Here is a thread where the guy has done the same thing, Huffer has provided a video. It talks about a Dell and it's a little long, but it does eventually get to the part where the front bezel's are change out.
     http://h30434.www3.hp.com/t5/Notebook-Hardware/Rem​ove-black-silver-bezel-from-optical-drive/td-p/605​...
     This is one from e-bay that will work.
     http://cgi.ebay.com/Samsung-Blu-ray-BD-ROM-8x-DVD-​RW-Laptop-SATA-Drive-New-/370491248810?pt=PCC_Driv​...
     It has been reported that the Sony Blu-ray drives are giving problems, but after reading some of these threads, it sounds more like a software problem.
     When you install the drive and boot up, Windows will automatically install the driver(s) for you. HP Media Smart DVD is the only Blu-ray playing software that HP has to offer and it can be problematic.
     I would recommend to buy some third party software form ArcSoft or Cyberlink. Keep in mind that Cyberlink makes the software for HP, so if you have problems with MS DVD then they may occur with Cyberlink. You can always use their trial first.
     Here is a link to MS DVD, I use this on in my dv8 and it will (should) work in your Dragon.
     http://h10025.www1.hp.com/ewfrf/wc/softwareDownloa​dIndex?softwareitem=ob-87326-1&lc=en&dlc=en&cc=us&​...
     Save it to the desk top and install it from there, not from a temporary folder. If you are using Commodo Fire Wall and/or AVG anti virus software, these have to be disabled before downloading and installing MS DVD.
     If you have problems installing MS DVD, post again and there is trick to get it to install.

  • Flash Player for Internet Explorer has to be reinstalled

    Every time I'm booting my computer, Flash Player for Internet Explorer has to be installed. I'm using Win7, 64 bits. Without reinstalling, Real Player will not play offline. However, when accessing YouTube with IE, it plays the video without reinstalling. Computers are fun!

    You need to close all iexplore.exe processes; use the Task Manager's Processes tab.

  • Cannot install BIOS update for my Qosmio F750

    Hi,
    I've downloaded the bios update QF750B200_EC120_WIN.exe for my F750 and when I attempted to run the update, it fails & I received the message:
    "The AC adapter is not connected, or battery power is not enough.
    Please connect the AC adapter, and charge the battery."
    However the AC adapter is connected & the battery is also fully charged. Does anyone have any ideas for making this work?
    Thanks

    Hi again,
    I've solved it but thought I'd put the solution here in case anyone else had a similar problem. Basically I had to:
    1 - Uninstall "Microsoft ACPI-Compliant Control Method Battery" using Device Manager
    2 - In Device Manger, go to Action>Scan For Hardware Changes
    3 - Close Lid & Remove Battery
    4 - Reboot without battery
    5 - Insert battery
    That seemed to sort it out so it was probably a problem witth the ACPI-Compiant Control Method Battery Driver or something like that. I think I'd disabled it & re-enabled it a while back so something probably went awry then.
    Cheers

  • Qosmio F750 - Cannot get some functions to work after Win 8 uprgade

    I own a Qosmio F750-125, PQF75E.
    Since I upgraded to Win 8, utilizing Toshiba Upgrade Assistant I might add, I had some issues.
    Most importantly not being able to get my Toshiba Blu-ray player to install.
    Eventually I managed, still don't exactly how but anyway, to install the latest version 1.0.0.5.70A.
    The problem now is that the 3D function still don't seem to work.
    When I open a 3D movie I only get the picture to display side by side, despite clicking on the 3D button.
    I tried to update the Nvidia driver (v290) to the latest version v314, available on Nvidia site, for for my GeForce GT540M graphics card but every time I get a message that the driver cannot find compatible driver hardware. Eventually from within the upgrade files downloaded by Toshiba Upgrade Assistant I managed to install the v306. I am still however unable to install v 314, after the "system check" I still get the message that the driver can find compatible driver hardware.
    However, the 3D still does not work. I notice that the face detection (SuperD Xtune) does not automatically start with the Blu-ray player when I launch or open a 3D file to be played by the Toshiba Blu-ray player, as it used to.
    How can I get my Blu-ray Player to play my 3D properly again.
    If I open Xtune I am able to calibrate the 3D and then it closes.
    I do not see a app under all apps which seem to have anything to do with the face detection function.
    Is there a setting that need to be changed, an additional driver to be installed or what?
    I am really disappointed with the support I have received from Toshiba themselves on this issue.
    I also wanted to update the BIOS of my laptop.
    My bios version is 2 dating December 2011 but I notice that a newer BIOS is available from Toshiba Website dating February 2012, if I am not mistaken.
    I downloaded that but when I run it I receive a message that my computer is not compatible.
    **bleep** this is frustrating.
    I want to get my 3D function back and be sure to run the latest and most appropriate drivers, at all times.

    Dear Tonny
    Thank you for patiently answering to my posts.
    You are right, despite extensive notes in the Toshiba Step-by-Step upgrade guide and specific mention that the Blu-ray player can only be installed by using the Upgrade Assistant, it is not installed by the Toshiba Upgrade Assistant.
    I am not sure though whether it actually did form part of the downloaded files but never the less I installed it by some miracle manually.
    It did not want to install at first. I received a message that the player could not be found. I noticed that the player is a sMedio Inc player and I then searched sMedio Inc and download their WinDVD Pro player. After that the Blu-ray driver from Toshiba installed.
    I also have it that v1.0.0.5.70A is the latest driver but through my local Toshiba Agent (MUSTEK) I received a driver from Germany and it was 1.0.0.5.48. I have not installed that as yet.
    I am convinced that the problem lies with the interaction between the Blu-ray Player, Nvidia driver and SuperD software.
    I searched my installed files and saw that I have Super D spd2900g and Super D X-tune installed. I uninstalled both and tried to re-install it form the file included in the Toshiba Upgrade Assistant (Super D IC Driver).
    However only the Super D spd2900g part installed and the Super D X-tune part is now missing.
    NOW I am completely BUGGERED because I do not know where to find the X-tune program to reinstall it.
    SuperD's website is very basic, in fact somewhat primitive.
    Thanks you also for the links, I have seen them somewhere and have had regard thereto but they are outdated.
    They relate to much older versions and windows 7 not 8.
    I must be honest, the poor response and support from Toshiba will most definitely lead to me not buying their product again. None of the so called technicians have help me achieve anything. I struggled and figured out everything myself so far.
    I still also have no answer in respect of the BIOS upgrade issue. Is there no one I can contact directly.

Maybe you are looking for

  • How can you set up a custom keyboard shortcut for Next Tab and Previous Tab?

    You can do this in Chrome because there is a top menu item for it, and OS X supports easily rebinding of keyboard shortcuts that are in the main menus. Is this possible in Firefox? Using a two handed shortcut to switch tabs is annoying when you want

  • Cisco 881 Zone Firewall issues

    I'm having issues with an 881 that I have configured as a zone based firewall. I have allowed HTTP(s) and DNS on the DMZ but my user is saying he cannot access the internet. On the corporate side the user complains that some websites fail, such as Li

  • CANON PRO-1 PRINTER PROFILE ACCESS PROBLEM

    I own a Canon pro-1 printer and I am trying to access my third party profiles from within the printer setup/printer profile window, but I am restricted to selecting from only the  Canon's Pro-1 titled profiles for example, Canon pro-1 <FA> 2/3 fine a

  • ResponseCode=500 ResponseMessage=Server Error

    Can HTTP GET many files, large and small, binary and ASCII, from Sun ONE software virtual server, but any attempt to HTTP GET an EXE file, regardless of size, results in ResponseCode=500, ResponseMessage=Server Error. Cannot find anything in Virtual

  • Export Versions not in viewer

    When I export and save a new version of a vile how come I can't see it in the viewer? Do i have to reimport it or am I missing a setting?