Reinstallation of Business Content DataSource in SAP R/3

Hi All,
For one of the BCT (busines content) DataSource 2LIS_04_P_MATNR, we notice in our system that the Delta process has been changed from 'ABR' in the delivered version to 'D' in the active version due to which we are not able to have delta loads from this DataSource into an ODS.
We would like to change this back to the BCT delivered version, i.e. revert to the delta process 'ABR'. After we compare the active version with the delivered version in RSA5 the only difference is in the delta process and some field descriptions. Does anyone have any information on:
1. How we can reinstall the BCT provided DataSource?
2. How much time would this take?
3. Would it impact the current delta process whereby this DataSource is feeding various InfoCubes?
4. Would we need a reinitalization of delta for the current InfoCubes that this DataSource is feeding?
Appreciate your inputs.
Thanks,
-Rakhi

Hi Ashwin,
I was looking through many documents in search of answers to my questions so I do not remember which one I had looked at.
But, I guess I understood what I read incorrectly. I now manually changed the ROOSOURCE setting for delta process in the development system to 'D' (here the active and delivered version were 'ABR') and then did a 'Transfer DataSource', it changed the ROOSOURCE entry back to ABR!
So I guess you were right, I will go ahead with this approach.
Many Thanks for your help...you get my points
BTW, how does one uninstall the BCT DataSource in SAP R/3?
Cheers,
-Rakhi

Similar Messages

  • Activation of Business Content Datasources in CRM Source system

    Hi,
          My Requirement is to activate all Datasources in CRM Develoment server.I have select the entire node in RSA5 and click "Activate Datasources".But for each Datasources system is askin for develoment request.Is there any procedure to activate all Datasources with single Development Request.
    Regards
    Vishal

    This section describes the general settings necessary for BW Integration in CRM.
    If CRM is not involved in your scenario skip this section.
    Transferring Application Component Hierarchy (CRM)
    Procedure
    This step has to be carried out in the CRM system.
    IMG Menu     Integration with Other mySAP Components  Data Transfer to the SAP Business Information Warehouse  Business Content DataSources  Transfer Application Component Hierarchy
    Transaction code     RSA9
    Confirm the security check: Do you want the content application Transfer Component Hierarchy? with YES.
    If a dialog box appears requesting the user to enter a development class, enter a development class in the customers namespace and choose Save or choose Local object.
    If no error message is sent the application component hierarchy has been transferred successfully.
    Cross Connectivity:
    It describes all settings that are necessary to connect the components of the SAP.system landscape with each other. The settings for each combination of two components to be connected are described in a separate structure node. The separate section headings make it possible to identify the activities required to connect certain components with each other. The section headings for components that are not part of the installation can be skipped
    Connecting SAP BI with SAP ERP, SAP CRM
    Procedure
    To carry out the activity, choose one of the following navigation options in the SAP BI system:
    Transaction Code     RSA1
    SAP BI Menu     Modeling  Data Warehousing Workbench: Modeling
    1.     Choose Modeling.
    2.     Choose Source Systems.
    3.     Select SAP in the window on the right.
    4.     Choose the Context menu (right mouse click).
    5.     Choose Create.
    6.     Make the following entries:
    Field     Entry
    Target computer (server)                            Server of the SAP ERP, SAP CRM or SAP SRM system
    System ID     System ID of the SAP ERP, SAP CRM or SAP SRM system
    System number     System number of the SAP ERP, SAP CRM or SAP SRM system
    Background user in source system     RFCUSER
    Password for source system     welcome
    Background user in BI     RFCUSER (can not be changed in this activity)
    Password for BI user     welcome
    9.     On the dialog box Please log on as an administrator in the following screen choose Continue.
    10.     Log on to the Source System with your administrator user. Choose the correct client.
    11.     On the dialog box New Source System Connection choose Continue.
    12.     On the Replicate Metadata dialog box, choose Only Activate.
    The building block CRM Lead Analysis describes the all the required activities to analyze the Marketing Lead Analysis data from SAP CRM in SAP Business Information Warehouse.
    The analysis is carried out with the following queries of the InfoCube 0MKTG_C01 CRM - Lead Management (SAP BW Business Content).
    The Lead Management InfoCube contains all the characteristics and data used for the administration of leads. This InfoCube enables you to execute the following standard queries available in SAP BW:
    1.     Channel Analysis: This query is used to determine the best channels by which business partners are contacted in the context of a marketing campaign. Following each marketing campaign, the lead manager can compare the success of a given channel to those of others.
    2.     Efficiency Reporting: This query is used to analyze the efficiency with which leads are qualified. By navigating to the sales organizations and the responsible employees for the leads, it is possible to assess how efficiently lead teams are working and to identify areas for improvement.
    3.     Historical Evaluation: Use to help analyze and compare leads over different intervals (comparison of different quarters or years for example) to see if general characteristics in the processing of leads can be identified for these periods.
    4.     Lost Leads: Provides an overview of the number of lost leads in a particular period and the reasons (implemented as a navigation characteristic) for the loss of the leads. This query is used to analyze the main reasons why leads might be lost, with a view to developing new strategies for overcoming these weaknesses.
    5.     Channel Mgmt.: Top-n Lost Leads (Current Year): In a Channel Manager Portal, this query provides an analysis of the leads lost by a Channel Manager over the past 12 months. Channel Managers can also view the leads lost by their Channel Partners. In a Partner Portal, this query shows the top-n unsuccessful leads distributed by a Channel Manager to a Channel Partner. Partner Manager can see the lost leads of the Partner Employees over the year. Partner Employee can view his lost leads over the year.........
    Before starting activities in this building block, you need to perform or check the following steps:
    1.     From the BW Connectivity building block the following activities have to be completed:
    a.     Local Settings è SAP CRM: all activities have to be completed.
    b.     Local Settings è SAP BW: all activities have to be completed.
    c.     Cross Connectivity è Connecting SAP BW with SAP R/3, SAP CRM, SAP SRM: Connect your CRM System.
    2.     From the General Settings for BW Integration building block the following activities have to be completed:
    a.     In section General Settings in CRM all activities have to be completed.
    b.     In section General Settings in SAP BW all activities have to be completed.
    Hope it will helps you........

  • Where to find info on 4.71 Business Content (datasources mostly)

    Our R/3 system is still at version 4.71, and we likely won't be upgrading soon.  I've tried looking online for standard BW business content (datasources), but all I seem to find require a higher version of the R/3 system.
    Our BW system is on 7.0, however it appears much of the 7.0 content can't be used with our current R/3 version.  Is there someplace on help.sap.com, or elsewhere, that would have content for 4.71?
    Thanks
    Michael

    I think following would help you
    help.sap.com -> SAP NetWeaver -> BI Content
    Release SAP NetWeaver 2004 BI Content 3.5.3 Add-On SP06 
    File Type HTML (PlainHTML)
    Languages English     German
    Material No. 500 732 39 (DVD) (SPS 11)
    Release Date March 2005
    http://help.sap.com/saphelp_nw04/helpdata/en/3d/5fb13cd0500255e10000000a114084/frameset.htm

  • Business Content Datasources -Do i need a down time?

    Hello friends,
    quick question folks
    I am going live in Production soon.I would like to know if i need to know if i need to request downtime in R3.
        Master Data
    1) 0PM_MAINTPOS_ATTR
        0PM_MAINTPOS_TEXT
        Transactional Data
    2) 0CO_OM_CCA_3
         0CO_OM_CCA_8
    All four datasources mentioned above business content datasources.They are all full load and no lo related.Do i need to request a downtime for them or do i need to fill any tables or clear any ques for them.
    Please advise,
    Ronit.
    (Points shall be assigned)

    Hi Ronit,
    none of these datasources mentioned below require downtime.
    You can go ahead and load data online and also no table filling is required.
    Naveen.A

  • Business content datasource enhancement

    Hi Experts,
    I am new to HR.
    We are implementing HR modules Personnel development and Personnel administration, while I was looking into business content extractors 0HR_PA_0 and OHR_PA_1, I found that there were only few fields in the extract structure but there were many fields in the cube.Do we need to enhance the datasources? how it works?. If anybody did the enhancement to these datasources, please give me the information with examples.
    Anita

    No, it is no necesary to enhance standard data sources. Those datasources extract, basically employee and date. Most infoobjects in cube are calculated from 0PERSON and 0EMPLOYEE attributes, having in count the date and employed extracted, because most in HR is time dependent.
    Assign point is usefull

  • Business Content Extractor for SAP Controlling ?

    Hi all,
      I would like to know if there is an existing Business Content Extractor's for SAP BW for CONTROLLING - INTERNAL ORDERS.
      What I need to be available from SAP R/3 can be accessible via :-
      SAP R/3 -> Accounting -> Controlling -> Internal Orders ->  Information Systems -> Reports for Internal Orders -> Line Item -> "KOB4 : Orders: Budget Line Items "
      Thanking very much for your guide

    Hi,
    Check this site:
    http://help.sap.com/saphelp_nw04s/helpdata/en/10/abab39fda7b86ee10000000a114084/frameset.htm
    With rgds,
    Anil Kumar Sharma .P

  • Transferring Business Content DataSources  IN BW

    Now, i'm practicing transfering bc datasource following best practice,  but i encount some problems .
    1.   the system prompt me that "Request TRNK900700   (IDADMIN) belongs to a different client"  when i transfer datasource 2LIS_11_VAITM.  i never created the request TRNK900700 , which is default  ,so i ask why defaut request is TRNK900700 ,and which blongs to  a different client, what  mechanism behind which(i'm a fresher)?
    2.  afterward ,i selected another request self-created ,the system prompt me that "2LIS_11_VAITM is locked in request/task TRNK900701",  what logical inside it?
    in a word ,with articulateness and simpleness, which master could make me understand systematicly request mechaniasm in sap! or offer me some infomation,
    thank a lot in advance!

    Hi!
    requests are part of Transport system and are used to manage the changes in the system. That means if you change someting in your system normally we need to change some other depedencies in other systems as well. for example after making the changes in the developement  system you want to make changes in the Qulatiy management sytems and afterwards in producion.
    so notmally we assign them packages which can later be transported to the intended destinations. So when you activate a datasource( a change) this change has may need to take place in other systems as well. so SAP system ask you to select the right package and request which has intended destinations. If you  want this change to takeplace only inthe local system and no where else you can delcare it as local object.
    here is a help link to changemmanagement and transport system help
    http://help.sap.com/saphelp_nw04/helpdata/en/3b/dfba3692dc635ce10000009b38f839/content.htm
    with regards
    ashwin

  • Inactive Business Content DataSources in BW DEV

    Dear all.
    I have activated a few FI Datasources in R3 DEV by "transfer dtasources" and checked them in RSA6. RSA3 also shows records in them. Later, when replicated them in BW DEV, the datasources look "yellow" meaning in modified version.
    I know that there is a transaction where we can change the status from modified to active in BW. If anyone knows please share.
    OR
    if there is any other reason for this problem ... please share your experience.
    In which server do i have to make changes (R3 DEV or BW DEV)
    Regards.

    Hi,
    I have activated a few FI Datasources in R3 DEV by "transfer dtasources" and checked them in RSA6. RSA3 also shows records in them. Later, when replicated them in BW DEV, the datasources look "yellow" meaning in modified version.
    I know that there is a transaction where we can change the status from modified to active in BW. If anyone knows please share.
    --> Datasource can be activated at RSDS.
    --> If its a BI7 datasource, go in change mode and activate.
    --> While replicating system asks which version(3.x or 7) needed while replicating if these are new datasources.
    OR
    if there is any other reason for this problem ... please share your experience.
    In which server do i have to make changes (R3 DEV or BW DEV)
    --> Any changes needs to do at source side(R3).
    Srini

  • Installation of Datasource from Business content

    Hi Friends,
    While Installing Datasource from Business content in SAP R/3 encounter with following error message. Can some one guide me how to transfer the hierarchy with Business Content. Appreciate your help in resolving this problem.
    Application component FI-GL of DataSource 0FI_TX_4 does not exist
    Message no. R8418
    Diagnosis
    You tried to assign a DataSource to the application component FI-GL. This application component is, however, not entered in the RODSAPPL table as an application component.
    System Response
    The DataSource is saved, but is not visible in BW under the node NODESNOTCONNECTED.
    Procedure
    You do not have the option yet to transfer the application component hierarchy from the Content.
    You transfer the hierarchy with Business Content.
    Thanks & Best regards
    Pravin

    Sorry if a year has gone by.
    This is because you  didn't heve the Application Component Hierarchy installed in BW itself.  Use rsa6 to do this, in the BW system (not the other source system.  Be careful if you have already somehting there, because it will override the hierarchy with the Business Content hierarchy.
    If you need to transport the active hierarchy, and not reinstall all the Business Content Datasources, the object is :
    R3TR DSAA APCO_MERGED
    So, create a workbench transport, and add the above object.

  • Missing datasources when installing Business Content

    Hi All
    We have a requirement for a number of SBC infoproviders (BI7/ECC6) which are new to us.
    The majority we have installed successfully but we are having problems with 0SLL_C01 / C02 and C03 which relate to Customs and 0BVTSD02 which is a Telephones Sales Acitivity DSO from the Beverage Industries area.
    We have 'successfully' installed all the data flows down to the infosource level but none of the datasources were installed.
    On re-checking in our source system RSA5/RSA6 we realised there were no datasources available for these infosources.
    How do you add business content datasources to your source system so they are available? or have we missed a process?
    Thanks
    Jerry

    Hi Jerry,
    The Datasource you are talking about is related to release of SAP GTS 3.0  pack.
    So please check with you basis team whether they have installed this plug-in in your source system.
    If these release /plug-in are not installed in your sourcce system you wont be able to finf it in the RSA5/RSA6.
    Thanks and Regards
    Arun

  • How to install the Business Content Cube 0PP_C02

    Hello,
      Can you please explain me how to install the Business Content Cube 0PP_C02 .
    What are the nesessary steps involved in this process. How this Standard Cube is available in
    AWB -> Modeling.
    What are the nesessary steps involved in the R/3 side.
    CAn you please help me in this.
    Thanks alot.
    Regards,
    Anitha

    Hi anitha
    TRy this
    To transfer and activate a DataSource delivered by SAP with Business Content, in transaction SBIW in the source system choose Business Information Warehouse à Business Content DataSources or Activating SAP Business Content àTransfer Business Content DataSources.
    The following figure displays the DataSources in an overview according to the application component.
           2.      Select the nodes in the application component hierarchy for which you want to transfer DataSources into the active version. Do so by positioning the cursor on the node and choosing Highlight Subtree.
    The DataSources lying under the subtree and other subtrees are selected.
           3.      To check for differences between the active and delivery versions of the DataSources, choose Select Delta.
    DataSources for which differences were found in the check (for example, due to changes to the extractor) are highlighted in yellow.
           4.      To analyze the differences between active and delivered versions of a particular DataSource, select the DataSource and choose Version Comparison. The application log contains further information regarding the version comparison.
           5.      To transfer a DataSource from the delivery version into the active version, select it in the overview tree using the button Highlight Subtree and choose Transfer DataSources.
    If an error occurs, the error log appears.
    Regardless of whether data has been successfully transferred into the active version, you can call the log by choosing Display Log.
           6.      To provide the active version of the DataSource in the connected BI systems and to enable data extraction and transfer, replicate the DataSource(s) with a metadata upload to the BI system.
    and in RSA1 in businuess content search ur required cube and select all the req fielsds in the next colums and select before and after is a must..in the selection field..
    this will solve ur issue..
    Prasanna

  • How to change Selection Criteria for a Business Content Data Source

    Hi Experts
    I am extracting data using 0CO_OM_CCA_9 Datasource. I would like to be able to select a range of Company Code (BUKRS) to pull in, but I cannot find a way to make certain fields available as selection criteria. When I go into "Change DataSource", I can unselect fields, and even select certain fields, but the option for most is grayed out.
    How can I make this field available as selection criteria in Infopackage?
    Thanks for the help.

    Its not that simple to enable a new selection for a Business Content Datasource, if its not already provided by SAP. Enabling new fields for selection should be accompanied by corresponding extractor code changes to process those field selections and use those selections throughout the extraction process.
    Solution for your problem would be create a custom extractor with all the logic of standard extractor (function module BWOMD_GET_CTRCSTA1 for 0CO_OM_CCA_9) and extra logic to process the new fields for selection.
    Hope it helps!

  • Business Content Questions - Urgent

    Can you please help me with the following questions... 
    1. I installed business content for CRM Sales Activities. I was also successful in loading transaction data. There is some master data that also needs to be loaded, but many of the master data datasources are not available when I checked RSA5 in the CRM system. How should I approach this problem?
       2. When installing business content, if "match (X) or copy" is selected and if we select background installation, will the system overwrite the objects or will it leave it in the existing version?
       3. When activating business content reports, I get the error "BEx transport request xx is not suitable or not available". What could this mean?
       4. After development, do I simply gather all the objects and transport them to QA/PRD or do I have to activate business content in QA/PRD systems also?
    Thank You.

    Hi,
    1.The datasources are:
    Opportunity - 0CRM_OPPT_H - Opportunities header
    0CRM_OPPT_I - Opportunities Items
    Activities - 0CRM_SALES_ACT_1 - Activities
    Master data -
    0CRM_OPPT_CYCLE_TEXT
    0CRM_OPPT_PHASE_TEXT
    0CRM_OPPT_TYPE_TEXT
    Business Partner
    0CRM_BPART_ATTR
    0CRM_BPART_TEXT
    Products
    0CRM_PRODSL_ATTR
    0CRM_PROD_ATTR
    0CRM_PROD_HIER
    0CRM_PROD_IDCMP_TEXT
    0CRM_PROD_TEXT
    0CRM_PROD_TYPE_TEXT
    This is not complete list.
    2.Please chk this links:
    Re: Confused on Install Business Content
    http://help.sap.com/saphelp_sem40bw/helpdata/en/80/1a66d5e07211d2acb80000e829fbfe/content.htm
    Re: Match (or) Copy
    About Match(X) or Copy in BC
    http://help.sap.com/saphelp_bw33/helpdata/en/80/1a66d5e07211d2acb80000e829fbfe/frameset.htm
    3.Try to get the authorizations if you are transporting from dev to quality or dev to prod.
    pls chk whether you stored in $tmp package.
    4.  yes,you can transport from development --->  Quality --.>production system for the activated  business content objects .
    Regards
    CSM Reddy

  • Missing InfoObjects in Business Content for Higher Education & Research

    Hello
    According to the SAP documentation "[Guideline u2013 BW Content 3.53 and 7.03 for Student Lifecycle Management|http://www.sdn.sap.com/irj/scn/index?rid=/library/uuid/a0780530-bf03-2b10-d5ad-e9e8a53def23]" there should be an InfoObject 0HE_EVPRST_TEXT. Unfortunately, I can't find it in the Business Content of my SAP BW.
    Furthermore,...
    - InfoObject 0HE_EVENT_ATTR has a different structure in the business content than mentioned in the documentation
    ...and...
    -  I can't find the DataSource 0HE_SLC_PI_1 in the business content although it's mentioned in the documentation.
    I've already posted in Re: Transformation between DataSource 0HE_EVENT_ATTR and InfoObject 0HE_EVENT but nobody could help me there.
    The BW version is SAPKW70022 and BI Content version is SAPK-70405INBICONT.
    Can someone help me in this forum section? Thank you!

    Hi Patrick,
    For your 0HE_EVENT_ATTR question:
    Please take a look at SAP note:
    - 1296185 --> https://websmp230.sap-ag.de/sap(bD1ubCZjPTAwMQ==)/bc/bsp/spn/sapnotes/index2.htm?numm=1296185
    - 1396684 --> https://websmp230.sap-ag.de/sap(bD1ubCZjPTAwMQ==)/bc/bsp/spn/sapnotes/index2.htm?numm=1396684
    For your 0HE_SLC_PI_1 question:
    Did you apply Ehp4 in your SAP SLcM system? If not then the Performance Indices extractors are not yet available in your system.
    For your 0HE_EVPRST and TEXT question (related Processing Status for Academic Events Planning):
    Did you apply Ehp3 in your SAP SLcM system? If not then the Processing Status for Academic Events Planning are not yet available in your system.
    I hope this helps.
    br,
    Rob

  • Business Content Source System Assignment???

    Hi Gurus,
    i am installing Business content and after going thru few posts in this Forums i have been hearing about Source system assignment in the Business content screen.
    but when ever i installed i never really used this option and we have only one R/3 source system
    Can anybody explain me its functionality please
    thankyou
    harish

    When you activate Business Content, DataSources from source systems are assigned to InfoSources in SAP BW. If you do not select a source system, all source systems are automatically assigned. If you have several source systems this may take a lot of time because transfer rules have to be activated for each DataSource from each source system.
    However an assignment of a DataSource to an InfoSource may not be necessary for all existing Source systems.
    Assign only the source systems you need to load data from for the Business Content Objects that you are going to activate.
    You can subsequently change the selection you made.
    The assignment of source systems is only relevant for transfer rules, DataSources and InfoPackages. If there is more than one source system, only those objects assigned to the specified source system are collected for the transfer. Objects that have not been assigned to the specified source systems are ignored.

Maybe you are looking for