Reinstallation problems trying to deal with boot camp

Ok a bit of a long story, i have been using bootcamp beta for a while on tiger. i have installed xp and deleted the partition twice before, and now ive decided to install it a third time, however boot camp refused to partition most likely because of fragmentation issues. to make life easier for myself i backed up my computer data onto an external with superduper. after this i reinstalled mac os x with the option that allows you to save your core files, but not the network information or users. after reinstallation i noticed that i only have about 11gigs of space as opposed to the 90 i should have. i assume that the files from my former mac user are somewhere on my computer, however no matter how hard i search i cannot find them. there is no partition or anything yet, and the applications from before the installation are still around. could someone shed some light on how i can find and erase the files from before the reinstallation without reinstalling again?

Open the Previous Systems folder on the hard disk and move or delete it or the files inside it as desired.
(32320)

Similar Messages

  • Problems installing Windows 7 with boot camp, cant find the cd/dvd driver...

    I´m having some problems installing Windows 7 on my new 12,1 (21,5) iMac with boot camp. When the computer restarts and the Windows 7 setup begins, i get the message that the cd/dvd driver cant be found, so i can't continue the installation. I've tried searching online for the driver, but can't find it. The cd/dvd seems to be a OPTIARC cd/dvd ad-5690h, which seems to be produced by Sony. I have a authentic windows 7. I even tried loading everything ver to a usb-drive, but then it wont boot.

    After reading around on this, and other forums I tried to burn a new dvd at reduced speed(2x), but that did'nt work either... I have an authentic windows 7 iso, downloaded with serial, is there any way to boot this from a jump drive or external hdd?

  • Problem with Boot Camp - Help!!

    Hi everyone,
    So I just got a new MacBook and installed Windows XP Home Edition through Bootcamp. I followed the computer certification guidelines of my college (so that I can connect to the network), i.e., I installed Symantec Antivirus and Windows Defender (required), and also Firefox and MS Office, and for good measure, I installed AdAware and Spybot (both free versions). I did not use the internet at all and scanned the totally-unadultered computer, deleting the very few things that popped up on Adaware and Spybot.
    However, the very next morning, Windows Explorer kept getting closed by "Data Execution Prevention" every time I tried to start Windows. (It says, "Instruction at 'Ox8bb9ed475' referenced memory at 'Ox8b9ed465'. Memory could not be 'written'".) Essentially, I can't use Windows and no amount of restarting remedies this.
    I took my MacBook to the Genius Bar at an Apple store and they said the problem was most likely Symantec Antivirus - apparently, Symantec has lots of problems with Bootcamp; they also recommended using Parallels instead. But since Penn requires Symantec to certify a computer, I don't know what to do about this (not to mention Windows won't run anyway)! To be sure, the Apple guys were very rushed and seemed to be speculating, so I'm not sure how to take their advice.
    Does anyone know what might be wrong? I remember reading that some current students at my school run Bootcamp just fine, and the tech dept. suggests using it as well. Any help would be GREATLY appreciated; I just don't want problems to occur once I start classes. Thanks so much.

    Perhaps you should post this question in the Boot Camp forum rather than here. This is not the proper forum for dealing with Boot Camp or Windows installation problems.
    I would consider reinstalling Windows. After verifying that it is working you can install Symantec AntiVirus and Defender, but I would not install anything else until you are sure the system is working properly. Note that you must turn off antivirus programs when you install new software. Failing to do so can result in defective installations.
    Be sure you have carefully read the Boot Camp documentation before installing anything.

  • I have a copy of Windows 7, and I am trying to bring up Boot Camp on my MacBook with Snow Leopard.

    I have a copy of Windows 7, and I am trying to bring up Boot Camp on my MacBook with Snow Leopard. But my Snow Leopard install disk is too old for Windows 7, so attempted Boot Camp install of drivers fails.
    I have hand-installed the NVidia graphics driver, and I have keyboard, minimal trackpad, and hardwire to internet all working. So the WIndows machine is usable. But I am hurting for wi-fi, better trackpad, and whatever else is delivered by Boot Camp. I can't use any of the Boot Camp upgrades because I do not have XP or Vista.

    Dear Nathan,
    Many thanks. To the best of my memory, that is how I got where I am today. Initially I had one failed setup, then discovered compatibility mode and ran using it.  The result was not an obvious failure, but something was not there because not only were some drivers missing (wi-fi, trackpad, ...) but (much to my disappointment) the 3.1 update would not run. It complained that 3.0 wasn't there. If I hardwired to my home network, the machine would do almost everything I wanted, but the graphics were slow and clumsy. That is when I hunted around for the NVidia driver and downloaded it from NVidia. And that is where I stand now.
    My son found this link http://www.simplehelp.net/2009/01/15/using-boot-camp-to-install-windows-7-on-you r-mac-the-complete-walkthrough/
    which has instructions claiming to do the install straight to Win 7 without using compatibility mode.
    Given that my clumsy efforts to patch things up have probably necessitated a Win 7 deinstall and reinstall to test either your plan or the one my son found, I am inclined to sit tight for a couple of days to see  how much I can learn.
    I appreciate your interest in  this problem, and if you are up for reading the process at the link my son found and commenting, I would be grateful.
    In any case, many thanks, Paul

  • Trying to install vista 64 on a separate internal drive with boot camp

    running into a wall here,
    I'm able to install vista x64 when I divide an internal OS X drive that works fine, but I want to load Vista on it's own entire internal disk (bay 4). Bays 1,2, and 3 I use for OS X they are all 1TB drives. When I go through the boot camp assistant and divide a disk 50/50 between OSX and Windows and then boot to the vista install disk, the vista setup screen shows a PARTITION as "disk x partition x BOOT CAMP" and it works to select that partition, format and load windows... No problem. However when you choose the option in Boot Camp to erase an entire extra disk (in my case bay 4) and create a single partition for Windows and then boot to the Vista install disk the disk that was erased of the mac formatting, it doesn't show up with "BOOT CAMP" in the name inside the Vista setup screen, nor will it let you install vista to it, even if you pick the right one and format it inside Vista setup.
    I've tried removing all internal disks except the one I want to load vista on and booting directly to the vista set up disc, and formatting with windows command line diskpart inside setup too, unsuccessfully. It simply keeps giving me messages that windows cannot be installed on the volume... I changed it from a GPU type disc using the "clean" command in diskpart but it still won't work! Man!!!
    How can I get vista loaded on a separate disk on my mac, boot camp or not? It seems silly that a disk must have an OS X partiton on it before windows will load on it... Is there a way to load Vista x64 on it's own dedicated internal disk? Gratitude for any real help, I'm positive I'm not the first guy to want to load vista on it's own disk LOL!

    So I figured this out myself, there was some kind of glitch in boot camp, i bypassed it and formatted the disk with the os x disk utility as a fat 32. pulled all the other drives out, and booted to vista setup. it formatted the disk to NTFS and lets me install vista 64 yahhhooooooooooooo!!!!!

  • Problems with Boot Camp, OSX Lion Server 10.7.3, and Windows 7

    My new Mac Mini Server is running OSX Lion Server 10.7.3. I want to install Windows 7 as a dual boot. I start up Boot Camp and use an ISO image to create a USB boot disk. I don't seem to be able to use the DVD to install, so I use an ISO image on disk. I continue with the Boot Camp installation, with all three options on the main screen checked.  When I get to the part where I have to pick a partition on which to install, the only one I can select, and must format, is the partition labeled BOOTCAMP. But the Boot Camp support software Windows is installed there. I can continue with the Windows installation, and boot into Windows 7 with no problem. But since the Boot Camp drivers were wiped out, I cannot connect to the network, etc. I don't have a Boot Camp control panel either.I did this once before on my other Mac Mini Server I have, running the same OSX Lion Server 10.7.3, and it worked without a problem. I'm writing this message on that copy of Windows. But this new install just will not work, after two days of trying. I *must* get this working. I'm stumped.
    CAN ANYONE HELP ??? TIA !!!!

    First, this is re-post of your other thread.
    Your driverrs were not and will not be "wiped out."
    Run Boot Camp Assistant. Download the drivers
    Your profile says Lion so that will let you store drivers on flash memory card.
    They are never placed where Boot Camp created a partition.

  • When i want to install windows7 on my snow leopard(10.6.4) with boot camp assistant,said that you must update your mac,i do this and try to install windows7 again but i have this problem again?what can i do?

    when i want to install windows7 on my snow leopard(10.6.4) with boot camp assistant,said that you must update your mac,i do this and try to install windows7 again but i have this problem again?what can i do?

    Graham Giles wrote:
    Have you seen this type of problem before? I think it could be a serious issue for anyone in a similar position.
    No; but then, I've not had occasion to use TDM. I've been using firerwire drives for over 10 years, both FW400 and FW800, with no issues except a bit of instability using a B&W G3 machine.
    TDM should be safe. Using cautious, manual copying of files from the Target machine to the Host machine should not result in unexpected loss of files or damage to the Target drive's directories. It should behave exactly the same as if it were an external (to the Host) firewire drive.
    •  I don't suppose there is anything I can do to 'put back' lost items from a separate Time Machine drive which has an up to date backup on it.
    There is probably a way to do that - seems to me that's one of the reasons for a Time Machine volume.
    On the other hand, if the Time Machine volume is rigidly linked to the now-absent OS on the original drive, there may be no way to effectively access the files in the TM archive.
    I know that using a cloned drive would work well in this instance.
    I have no experience with Time Machine, so perhaps someone who has will chime in with suggestions.
    With the machine in TDM with the other machine, have you tried running Disk Utility to see if you can effect repairs to the drive?

  • I have a copy of Windows 7, and I am trying to bring up Boot Camp on my MacBook with Snow Leopard. But my Snow Leopard install disk is too old for Windows 7, so attempted Boot Camp install of drivers fails.

    I have a copy of Windows 7, and I am trying to bring up Boot Camp on my MacBook with Snow Leopard. But my Snow Leopard install disk is too old for Windows 7, so attempted Boot Camp install of drivers fails.
    I have hand-installed the NVidia graphics driver, and I have keyboard, minimal trackpad, and hardwire to internet all working. So the WIndows machine is usable. But I am hurting for wi-fi, better trackpad, and whatever else is delivered by Boot Camp. I can't use any of the Boot Camp upgrades because I do not have XP or Vista.

    While we all have MacBooks in this forum not all of us use Boot Camp. There's a Boot Camp Support Community where everybody uses Boot Camp. You should also post this question there.
    https://discussions.apple.com/community/windows_software/boot_camp

  • Problems with Boot Camp - PLEASE HELP!

    I'm having problems with Boot Camp. Here's what's happening. I ran Boot Camp Assistant, partitioning a 32GB BOOTCAMP drive. I insert my copy of XP and start the installation. My MBP restarts and boots into the Windows Setup. I let it run through the initial actions. I press ENTER to proceed, F8 to accept the license agreement, then when I get to the part where I should be able to select the Partition 3 BOOTCAMP drive (as it says in the Apple Boot Camp Manual) there is only a Partition 1 Unknown drive. It is the only drive to choose from and its a C: drive. I can't figure out why after I run boot camp the partitioned drive doesn't appear as an option in the windows installation. Please help!!!
    Message was edited by: CarlConti08

    Boot into Leo, start Disk Utility and you should see two partitions, your Leo partition and a Fat32 partition of 32GB at the end of the drive.
    If not, boot camp didn't create it for some reason. If it is there then check it with DU and make sure its OK.
    While your in there give it a name so you can easily identify it in your windows installer.
    If there is no partition, create one using Disk Utility at the END if the drive. make sure you create it as a msdos (Fat32) partition and give it a name. The name cannot be more than 11 characters must be comprised of numbers and/or letters (no special characters).
    Verify it before exiting DU.
    Put in windows install disk, reboot - hold option key after the chime until you see the boot screen - select windows CD to begin install.
    Don't forget to install Leo windows drivers after installing windows.
    Kj

  • Problems using vista with boot camp

    Hello,
    I am currently running vista with boot camp and I have been experiencing a few issues. First on the windows partition it claims that no sound driver is installed-is there an easy fix to this? Also I have been trying to plug in my WD My Book USB external hard drive but I cannot find it to use...although in the device manager it claims that it is working properly. Thanks guys

    When you first installed Windows did you install the drivers that came on your Leopard Installation disk?
    If not then boot into Windows and get to the Vista Desktop. At this time, insert your Leopard Installation disk in the drive. This should automatically begin installing the Boot Camp 2.0 hardware drivers on your partition. Once completed, you will be asked to reboot into Windows and then you should be all set.
    Axel F.

  • Problems with Boot Camp 2.1 update & Heat Generation with new MBP

    After spending a lot of time debating whether to go with a high-end mac or high end PC, I eventually went with a top spec MBP (17” 2.93 ghz). This was a difficult decision to make, not to mention expensive.
    I figured - the Mac was the winner although lower spec then a similar priced PC it had a major advantage – to run Windows XP (which I use for some creative and recreational purposes).
    I am now very frustrated and angry – the peace of mind, stability and straightforward Mac ideals that I admire have been non existent so far. It has been extremely stressful!
    Problem 1 – when setting up boot camp I wanted to go with the NTFS option, so I partioned 50 gig of space. But after choosing this, the only confirmation option that was displayed was for FAT so I was left wondering if that was correct? (I was very slow and methodically following instructions).
    *Problem 2* – After boot camp was set up, there was not Ethernet driver in the Boot Camp / OS Install Disk so I couldn’t connect to the net. It is just lucky one of my neighbours has an unsecured wireless network that I ‘hopped’ onto, to download the driver.
    *Problem 3* – HEAT!!! when running an old spec video game (Unreal Anthology) the MBP became incredibly HOT. So much so that I had to stop after a few minutes because it was clear that damage was being caused. I have since read on other discussions that this is a problem many other MBP users running boot camp are experiencing.
    *Problem 4* – I downloaded the Boot Camp 2.1 update hoping this would help, but all it did was cut all the sound and disable the keyboard apple keys. I had to uninstall boot camp then reinstall the older version to get the sound back (no ethernet connection again!)
    I am extremely upset – I feel I have been miss sold. I brought the Mac with Apples reassurances (and their sales patter of ‘oh yeah, your windows programs will work better on a mac’) only to find this is NOT THE CASE.
    I hope I have been doing something wrong, because then I can sleep better knowing I have just spent a lot of money on the right tool I need for my job. At the moment I have a nasty feeling of painful regret and stress – everything I hoped to avoided when buying a mac.
    If any apple support people or other users can help I would really appreciate any feedback you may have. Thanks in advance…

    Hi I too just bought a MacBook Pro 2 weeks ago. I settled on a Mac as I had so much problems running Mac OS on my Dell laptop.
    I had OS 10.5 running on my work Dell Latitude D520, it was not a hack but a genuine retail version of Leopard. But I had issues with the keyboard / track pad not working, so I had to use external keyboard / mouse. Not fun on a laptop.
    I’m now running OS 10.5.6 and XP 64 bit on my MacBook Pro. I chose XP 64 bit so I can take advantage of the 64bit CPU and the 4 Gig of RAM in my MacBook Pro.
    It took me 2 days to get all the drivers to work properly well I say all, the bluetooth does not work but I don’t use bluetooth so don’t really care.
    I chose XP 64 bit over Vista 64 bit as Visa is the worst OS Microsoft have come up with to date.
    *If any Apple guys is looking at this please let me know if Apple will ever produce XP 64 drivers, I think I’m not the only one interested in the drivers.*
    Nick9000 with regard to your problems.
    Problem 1
    The Mac will only format FAT32 as it cannot write NTFS only read it. You need to choose NTFS when you are installing from the Windows CD, you can still convert your FAT32 system to NTFS within Windows.
    Problem 2
    I had the same problem but then I was using a non-supported OS.
    Problem 3
    My laptop runs a bit hot at times but to me all laptops run hot maybe more so Mac laptops. You are running the 2.93 GHz so I guess it does run hotter than my 2.66 GHz.

  • I have a problem with boot camp and maybe macbook pro?

    I am having issues with boot camp here is what I did.
    I attempted to partition for windows then this message popped up after 2 minutes:
    Verification failed. this disk could not be partitioned.
    Use Disk Utility to repair this disk.
    so I used the disk utility to repair the problem then this message came:
    First Aid failed
    Disk Utility stopped verifying “Macintosh HD” because the following error was encountered:
    The underlying task reported failure on exit
    Verifying volume “Macintosh HD”
    Checking HFS Plus volume.
    Checking Extents Overflow file.
    Checking Catalog file.
    Incorrect block count for file Temp File
    (It should be 13 instead of 0)
    Checking multi-linked files.
    Checking Catalog hierarchy.
    Checking Extended Attributes file.
    Checking volume bitmap.
    Checking volume bitmap.
    pair",0)
    Checking volume information.
    Invalid volume free block count
    (It should be 23087569 instead of 23087570)
    The volume Macintosh HD needs to be repaired.
    Error: The underlying task reported failure on exit
    1 HFS volume checked
    Volume needs repair
    So let me explain something. I just got the macbook pro put some music on it and pictures. so what do I do to fix this problem? please let me know.

    Repairing the Hard Drive and Permissions
    Boot from your OS X Installer disc. After the installer loads select your language and click on the Continue button. When the menu bar appears select Disk Utility from the Installer menu (Utilities menu for Tiger.) After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list. In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive. If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported click on the Repair Permissions button. Wait until the operation completes, then quit DU and return to the installer. Now shutdown the computer for a couple of minutes and then restart normally.
    If DU reports errors it cannot fix, then you will need Disk Warrior (4.0 for Tiger) and/or TechTool Pro (4.5.2 for Tiger) to repair the drive. If you don't have either of them or if neither of them can fix the drive, then you will need to reformat the drive and reinstall OS X.
    If you are unable to repair the drive then you will need to reformat the drive using Disk Utility. Of course this will erase all your files so have a backup before you start.
    Basic Backup
    Get an external Firewire drive at least equal in size to the internal hard drive and make (and maintain) a bootable clone/backup. You can make a bootable clone using the Restore option of Disk Utility. You can also make and maintain clones with good backup software. My personal recommendations are (order is not significant):
    1. Retrospect Desktop (Commercial - not yet universal binary)
    2. Synchronize! Pro X (Commercial)
    3. Synk (Backup, Standard, or Pro)
    4. Deja Vu (Shareware)
    5. PsynchX 2.1.1 and RsyncX 2.1 (Freeware)
    6. Carbon Copy Cloner (Freeware - 3.0 is a Universal Binary)
    7. SuperDuper! (Commercial)
    The following utilities can also be used for backup, but cannot create bootable clones:
    1. Backup (requires a .Mac account with Apple both to get the software and to use it.)
    2. Toast
    3. Impression
    4. arRSync
    Apple's Backup is a full backup tool capable of also backing up across multiple media such as CD/DVD. However, it cannot create bootable backups. It is primarily an "archiving" utility as are the other two.
    Impression and Toast are disk image based backups, only. Particularly useful if you need to backup to CD/DVD across multiple media.
    Visit The XLab FAQs and read the FAQs on maintenance, optimization, virus protection, and backup and restore. Also read How to Back Up and Restore Your Files.

  • Problems installing Windows with Boot Camp

    Hello,
    i am having this strange issue with boot camp. i have my windows 7 install dvd and go through all the standard boot camp procedure's, but once its finished partitioning the disk and restarts it just opens up to the apple logo on a grey screen, no spining logo, no status bar, nothing! ive left it for 6 hours on this screen 2-3 times now and nothing is happening. when i turn off and on again it just goes to a black screen telling me to install a bootable device and press any key. BUT THE INSTAL DISC IS IN!!! its driving me insane!
    windows was burned to a dvd using disc aid and the .iso copied over fine and was verified and everything. the machine im trying to get this to run on is a 15 mbp 2.66 i7. the optical drive has been replaced with a 120gb ssd and there is a 1tb internal sitting in the hdd bay. i dont know if that has any relavance to this issue? i boot osx 10.7 (mountain lion) off the ssd and am trying to boot camp my hdd, but that couldent cause issues could it?
    ive had a look around the other disscussions and fourums for 4 days now and i think i have seen nearly every bootcamp related youtube video there is! AND IT STILL DOSENT WORK!
    if any one has ANY idea or sugesstion on how i can rectify this issue it would be greatly appriceated.
    thanks for your time!
    Harry.

    "You can't do both boot drive and storage drive on the same drive.
    A boot drive requires (all data off first) it to be formatted GUID and OSX Extended Journaled, then OS X installed, then option key at boot to select that HD OS X boot drive, then BootCamp proceedure ran and install into the partition it creates on the HD."
    THANKS AGAIN, i think im getting closer to a solution, i really dident think that simple old bootcamp could become so complicated!.
    so i couldent (boot off the ssd as normal) and then create a seperate partition on the hdd of about 30gb, install osx on it, boot from that (with the optical bay back inside), create a thrid partition on the hdd via bootcamp then instal windows?
    its just that erasing and reformating the hdd sounds a bit scary, its taken months of getting the permissions and fixing rouge ubd processes all right so everything works perfectly and seamlessly together with the ssd+hdd combo
    "You can replace the data back into OS X on the HD and use that as extra storage, but your main use OS X user(s) needs to remain on the boot SSD.
    To do this you need to use Carbon Copy Cloner to clone the OS X boot partition of the SSD to the blank/empty of data HD, this will copy all the Users accounts accuratly so you can access them from the SSD.
    As you can see here, I can access the same user folders of my cloned partition from the original partition, no "-" minus signs on the folders as I'm the exact same user.
    I am currently booted into Macintosh HD and accessing my same named user folder on the clone on Macintosh HD 2.
    So basically OS X on HD will become your new "Storage Drive"
    this is pretty much exactly how im set up at the moment! with the user account and applications on the SSD and libarys like iphoto, itunes etc are on the HDD and i symlinked some others like the downloads off to the hdd aswell.
    thanks for your help again, ive given you some more stars for your time!
    Harry.

  • Problem with boot camp and windows 8

    I have a Macbook late 2009 with Mountain Lion. I want to install windows 8 with boot camp but when I am asked to enter drivers, windows 8 don't find them. I have downloaded drivers from boot camp assistant but they don't work. When Apple will provide ???

    Obviously Boot Camp does not support Win 8 at this time. When and IF Apple decides to do that no one here knows. This is a user to user forum. Perhaps you should call Apple support and ask them.

  • Mac with boot camp. i got problem with the clock .. help please ..

    hi. im using macbook pro. my mac hav been install with boot camp. so now i run two operating system. mac n windows 7 (64 bits) but i can set my clock time correctly for both my OS.. how can i solved this .? i hav doing  google search about this... but i found nothing.. can sumone help me

    Your OSX psrtition and your Boot Camp partition are completely separate. You can reinstall Mavericks without affecting Boot Camp and you can redo Boot Camp without affacting OSX.

Maybe you are looking for