Reinstalled and Imported Data with Migration Assistant, What went wrong?

My MacBook HD recently went boom! After replacing it, I reinstalled the OS with the original DVD discs, a few steps later, I was offered to import data from an older computer so I plugged-in my FireWire portable disk with a CarbonCopy image of my old disk and proceeded with the import process.
After the Assistant finished, only a minor import error with Missing Sync was displayed. When the OS was completely installed, I tried opening some Office apps and Dreamweaver but none of them would open. So I tried to reinstall them but then I discovered that after the disk image from the DMG files was mounted, I was unable to open its associated finder window in order to copy or install the apps.
Does anyone knows why is this?
Also, on both the FireWire Disk and the MacBook fresh install, there are a few files and folders named Desktop-#. Why are there so many?

The FireWire disk is a backup of the original HD that went bust on my MacBook. I don't know for sure the exact version of the OS (10.4.10 maybe) but it was Tiger for sure. My Macbook is a Core Duo 13.3-inch model.
The HD inside my MacBook now, is the original Tiger version that shipped with it but I'm in the process of downloading and installing all issued updates. I re-erased all the contents again, so now my laptop is fresh again.
Any guiding-light as to how to transfer the info on the FireWire back to the laptop?
BTW I can boot my machine from the FireWire disk and its works without problems, except for the office apps that don't launch.

Similar Messages

I just downloaded Photoshop Elements 13 and IMPORT is not functional. What is wrong?

I just downloaded Photoshop Elements 13 and IMPORT is not functional. I reinstalled the printer /scanner and still not functional. My computer is recognizing the printer. What is wrong?

I guess the first thing you now need to do is to get the latest drivers for your printer because as you say you uninstalled it from your machine and now reinstalled it again. I don't know why you thought printer should have been uninstall;led but anyway, please reinstall the driver and then see if it is recognized by your operating system and try scanning something as a test from outside the PSE13 before going back to PSE13 and trying to scan your real image.
Please post back so that Barbara or R_Kelly can help you as I don't use Apple Mac.

HT1926 I am getting error 7 (windows error 126) when installing latest version of itunes. I have tried uninstalling and reinstalling and keep getting the error. What is wrong?

I am getting error 7 - windwos error 126 when installing the latest version of itunes. I tried uninstalling and resinstalling several times. Everytime it tries to start up itunes after install it gives some error about connecting a mobile device and then it gives the error. Help.

Hello agurpi,
The following article provides steps that can help resolve this error.
iTunes 11.1.4 for Windows: Unable to install or open
http://support.apple.com/kb/TS5376
Cheers,
Allen

Downloaded the new Lion software and now Mac runs slow. What went wrong?

I downloaded the new Lion software and now my Mac runs slow. What did I do wrong?

That didn' t fix it for me. and I also repaired and verified disk permissions that didn't help. So how do I do the next steps? Can you lay it out slowly for me please?
if that doesn't fix your slow down open disk utilities
-repair and varify disk permissions
-reboot and hold comman-R
-open disk utilities once your on your recovery partition
-repair disk and verify disk
-reboot and you imac should be running at tip top shape
if that doesn't fix your slow down open disk utilities
-repair and varify disk permissions
-reboot and hold comman-R
-open disk utilities once your on your recovery partition
-repair disk and verify disk
-reboot and you imac should be running at tip top shape

HT4889 I just transferred data using migration assistant from a macbook prop to a macbook. I am trying to log back into the user that was on the pro but is now on the macbook with the same password as before, and it says my password is incorrect.

I just transferred data using migration assistant from a macbook pro to a macbook. I am trying to log back into the user that was on the pro but is now on the macbook with the same password as before, and it says my password is incorrect?

Suggest you try the password for the Macbook, not the previous one.

I am having problems with migration assistant (windows pc to Mac 2011) When I get to the 'Quit other applications' box and click continue, nothing happens. There are no other apps running - any ideas, please?

I am having probems with migration assistant. Trying to transfer data from a windows laptop to iMac 2011. It was working fine when I did the set-up yesterday, but it was going to take hours to transfer some videos so I quit the process with the intention of doing it again at a later stage. However today I find that everytime I get to the 'Quit other applications' box on the Mac and click 'continue', nothing happens. Have checked mission control and confirmed no other apps running. Tried several times with the same result every time. Migration Assistant running on my laptop with the 'Waiting for mac to connect' box displayed. Mac is connected to wi-fi OK as able to use Safari and access internet. Any ideas, please?

Thanks for your suggestions. Have managed to get Migration Assistant working but now have a new problem, i.e. where does it save the transferred files?!! Searched a few forums and it seems it saves it under your old username, or suchlike. Anyway I tried logging on as a new user using my old user name but there were only a handful of files there, couldn't locate the majority of stuff from my old laptop. Anyway I don't intend to go through any more hoops with MA - will just save the important stuff to an external drive and transfer it that way. Not impressed with MA at all. I thought it was supposed to be a user-friendly tool to simplify the transfer from pc to Mac - not my experience, I'm afraid!

Insufficient space for importing TM backup with migration assistant

First of all this is not for my main Mountain Lion installation on my Mac Pro, it is on a VM Ware Fusion virtual Mountain Lion installation that is running on my Mac Pro also running Mountain Lion. So this is really more a question dealing with VM Ware Fusion (or Parallels since I have the same issue with that as well) vs. a problem with Mountain Lion. Confused yet? I sure am....
I am trying to import a time machine backup of my previous Snow Leopard drive into my virtual machine. I did not want to import this into my new drive because I am starting fresh and trying to clean up and Snow Leopard had 10 years worth of crus I am trying to get rid of, but I would still like to have my old SL drive running within VM Ware to help with the transition. I have a Mac Pro with a dual monitor set up so I want it to run in my second monitor and very slowly over the next few weeks get all the files I want and need instead of just importing a bunch of useless crap.
Anyway, here is the problem I am having and cannot seem to get past this hurdle. When I open migration assistant inside VM Ware ML and choose my time machine backup of snow leopard everything works fine until it finishes calculating the size. I deselected all the files and folder I possibly can which leaves 209GB. Even with every single folder deselcted it still give an insufficient storage error I have already resized the VMware drive to 400GB which is more than enough. In my real machine under Finder>Get Info it shows it as 400GB, but within the virtual machine it is only showing the Mac HD to be 40GB which won't allow migration assistant to import the backup due to insuffient storage.
I have a Mac Pro with tons of disk space so I have plenty of free space to allocate but I have tried everything I can think of but came up blank. Sorry if my explanation was overly verbose or confusing but I wanted to give as much detail as possible. Haven't really fiddled with the settings in VM Ware in a while so I must be missing something.
So, how do you import files showing as larger than 40GB from a time machine backup with migration assistant without getting an error that there is not enough remaining space? And again, I have already resized the disk to 400GB that shows as 400GB on my real machine but only as 40GB inside the VM Ware Mac HD. I also have Parallels if that is easier to do what I am trying to accomplish.

I just solved the problem! And this is actually a pretty big deal because experts at the VM Ware Fusion website and many other forums told me it was impossible.
So here is the guide to running Mountain Lion in VM Ware Fusion or Parallels with a partition larger than 40GB and allows you to import an old user account from Tiger, Snow Leopard, Lion, etc..
1) Make sure to shut down Mountain Lion in VM
2) Under VM settings expand hard drive to whatever size you like
3) You will need either a disk image or an actual DVD of mountain lion, mount that in your VM and choose it as start up. After rebooting open disk utility and partition Mac HD. Instead of only showing the 40GB limit it shold now show the size you created from step 2. Close disk utility and install Mountain Lion as normal. Reboot and unmount disk image.
4) You now have a virtual Mountain Lion with whatever hard disk size you chose.
5) Open migration assistant and do your time machine back up as normal from previous systems.
The reason you might want to do this are many. In my case I wanted to have my old Snow Leopard user account open and running on my second monitor since I just did a fresh install on my Mac Pro. It is easy to import audio, photos, videos but there was a lot of other things I want to take my time bringinging over. There are also many cases where I needed to open up an app and view settings. Now I have my old machine essentially running at the same time as my new install side by side which is fantastic.

Importing and Exporting Data with a Clob datatype with HTML DB

I would like to know what to do and what to be aware of when Importing and Exporting data with a Clob Datatype with HTML DB?

Colin - what kind of import/export operation would that be, which pages are you referring to?
Scott

What's the fastest way to transfer files with Migration Assistant?

I am trying to transfer everything from an iMac 21.5 over Ethernet with Migration Assistant and it is 20+ Hours estimated transfer time. Once I strt can I switch to Thunderbolt? Everything I've read states this is the fastest means.
Thanks!

Thanks. Through further investigation my old iMac does not have a Thunderbolt port so that's out of the question. I think it was going over wifi instead of Ethernet so I disabled my router and am now migrating from Time Machine via USB 2.0. Estimated around 3+ hours now.
Any idea how to get my old iMac out of migration mode?

Multiple problems with Migration Assistant

I have just wasted more than 4 hours trying to transfer all my information from my G5 iMac to my new 13-inch aluminium MacBook using an ethernet cable and the 'Migration Assistant'.
Perhaps someone here can enlighten me as to why this has been such an unmitigated disaster and where I went wrong.
I followed the instructions exactly as to how to proceed - this is what happened ...
The Migration Assistant showed that the items I selected to transfer were as follows -
Documents 5.9GB
Music 20.8GB
Pictures 34.1GB
All Other Files 5.5GB
Total 66.3GB
The transfer commenced at 1748. By 2053 the Migration Status in the dialog box stated -
'Transferring files to support applications' - the progress bar showed that this was more than 95% completed and the message below the progress bar stated 'Less than a minute remaining'. Both the 'Go Back' and 'Continue' buttons in the dialog box were greyed out.
After a further hour with no progress I terminated the Migration Assistant application. My MacBook showed that the transfer had been completed 'with some errors' - I cannot recall the exact error message but it referred to 'Charcoal' and fonts.
When I commenced the transfer I had only used 15.7GB of my MacBook hard drive. Apart from doing a custom reinstall of the OS I had also installed Office 2008:mac. After the transfer I ran Disk Utility which showed that I have now used 85.2GB of my MacBook hard drive.
HOWEVER, when I opened iPhoto - it is completely empty. Similarly, iTunes has no music in it either.
How can this be??? Of course, there are no documents in the Documents folder either.
Can someone please tell me whether I should simply do yet another Erase and Install (and waste another day of my time) or whether there is some way I can locate my missing data?
Needless to say, I never had these problems when I could connect one Mac to another using a Firewire cable and transfer my data via Firewire.
I'm sorry if I have made some very basic mistake here, however, I thought that if I followed the instructions as to how I could transfer information 'from another Mac' it would 'just work'. How wrong I was!
Tricia

Thank you for the suggestion Doug. A few extra hours of digging today resolved my problem.
I remembered that, when I initially started to transfer the data the Migration Assistant threw up a warning to the effect that the user name I was transferring from the iMac already existed on the Mac Book (am I the only one who uses the same long name and short name on two machines???). Naturally, the MacBook has to have the user's name set up before the Setup Assistant or the Migration Assistant can be used to transfer files and folders from another Mac. I recall that the only option that allowed me to proceed with the transfer was to change both the long and short names on the iMac (the machine from which I was transferring the information).
This prompted me to check Macintosh HD/Users.... I was surprised to see that, apart from the account I had set up on the MacBook there was a second user (with the new short name from my iMac). This User had folders for Desktop, Documents, Downloads, Library, Music and Pictures (all of which had the little red circle with the minus sign in the lower right hand corner of the folder).
So, I logged out as my normal user name and then logged in using the user name from the iMac and ...voila ... my iTunes music folder, my iPhoto library, my documents and all the applications on the iMac had been transferred to the MacBook under my iMac user name.
Because I don't want to have two user accounts on my MacBook I copied the iTunes music folder and the iPhoto library to the Shared folder - making sure that I first used Get Info to check the Sharing and Permissions for the folders which I changed to allow my 'normal' name Read & Write privileges. After they were copied into the Shared folder I logged out of my 'iMac name' and logged back in as my normal name. I then copied the iTunes music folder and iPhoto library from the Shared folder to my Home/Music and Home/Pictures folder.
I know it was a very 'clunky' way of getting what I wanted but it all works!! I'm now busily deleting the apps that were copied across from the iMac because, obviously, my iMac is a PPC G5 and my MacBook is an Intel. It occurred to me that I'm better off either re-installing from disk or downloading directly to my MacBook so that the apps are for Intel machines not the PPC.
Cheers
Tricia

Backup will not restore with migration assistant.

This is long and complicated but here goes. Had a 10.5 machine PPC that was backing up to a time capsule. IMac blew out PS so was toast. Took it home and took another iMac 10.5 machine that had a bad HD. Put new HD into that machine and installed 10.6 and then ran migration assistandt from the old iMac HD drive from the unit with the bad PS. The restored iMac with the new HD was a perfect close of the older iMac and everything was perfect. Took to customer site and they were happy. Time machine started backing up again to the same time capsule as before. It created a new backup image on the time capsule with the EXACT SAME NAME as the older iMac had. I did not know that until a year later when the new hard drive in the rebuilt iMac failed. I took a newer iMac of the Intel variety with 10.7 on it to the customer site. I told migration assistant to restore from the time capsule users and data file. I di not want it to restgore programs since I knew the ones on the newer iMac where newer versions and probably not compatible. Restore seemed to go just fine. Users were all there and desktop looked the same as the older iMac with the dead hard drive. I had to install a printer driver but all appeared okay. Customer called the day later and said all files for pages and numbers and address book appeared a year old at the newest. See where this is going.
I went to the site and started looking at the backup files on the time capsule drive. Taht is when I noticed that two exact backup named files existed. So I started drilling down through them ( Not using time machine casues it only had 1 day history on it ) and looked at the dates of the files. Sure enough, one of the backup images had files that had all ended a year ago when the original iMac blew out the PS and the other backup file with an identical name had files much more current in the current month and year. Simple I said to myself. I just happended to pick the older file to restore from. So I renamed the older file so I could not get them confused. Double checked that the one with the current files was named correctly. Went to migration assistant again and ran it again. Completed just fine but sill no file less than a year old. NOw I am really puzzled so I tried a test of one simple file to see if I was wrong in my assumptions. The address book file was one of the files that was a year old. I went to the time caplsule and drilled down to the exact file that address book makes. I had already thrown the corresponding file away on the new machine so I copied the file from the exact same location on the time capslue back up to the same location on the new machine. I then fired up address book on the new machine and the address book worked perfectly with the new and updated and current records.
So now I am sure that the drive image that I have been playing with on the time capsule has the up to date backups. But migtration assistant will not move them to the new machine. It will take a very long time to move every pages and numbers files scattered around in various folders to do this manually. What is wrong with migration assistant that it will not work correctly.

I am not asking if there is anything on the card. I'm not worried about the backup or recovering all of my information. I'm asking if setting up the replacement phone as NEW will change anything at all when I use the OLD sim card.

I accidently downloaded something that made my webcam flash on spuradically even once i deleted it. when i restarted my computer it got stuck at the white loading screen with the grey apple and wont go past there..what is wrong? will applecare cover this?

i accidently downloaded something that made my webcam flash on spuradically even once i deleted it. when i restarted my computer it got stuck at the white loading screen with the grey apple and wont go past there..what is wrong? will applecare cover this? my computer also slowed down drastically before it stopped working..thanks! HELP PLEASE!

Take each of these steps that you haven't already tried. Stop when the problem is resolved.
Step 1
The first step in dealing with a boot failure is to secure your data. If you want to preserve the contents of the startup drive, and you don't already have at least one current backup, you must try to back up now, before you do anything else. It may or may not be possible. If you don't care about the data that has changed since your last backup, you can skip this step.
There are several ways to back up a Mac that is unable to boot. You need an external hard drive to hold the backup data.
a. Boot into the Recovery partition, or from a local Time Machine backup volume (option key at startup.) When the OS X Utilities screen appears, launch Disk Utility and follow the instructions in this support article, under “Instructions for backing up to an external hard disk via Disk Utility.”
b. If you have access to a working Mac, and both it and the non-working Mac have FireWire or Thunderbolt ports, boot the non-working Mac in target disk mode. Use the working Mac to copy the data to another drive. This technique won't work with USB, Ethernet, Wi-Fi, or Bluetooth.
c. If the internal drive of the non-working Mac is user-replaceable, remove it and mount it in an external enclosure or drive dock. Use another Mac to copy the data.
Step 2
Press and hold the power button until the power shuts off. Disconnect all wired peripherals except those needed to boot, and remove all aftermarket expansion cards. Use a different keyboard and/or mouse, if those devices are wired. If you can boot now, one of the devices you disconnected, or a combination of them, is causing the problem. Finding out which one is a process of elimination.
If you've booted from an external storage device, make sure that your internal boot volume is selected in the Startup Disk pane of System Preferences.
Step 3
Boot in safe mode. Note: If FileVault is enabled, or if a firmware password is set, or if the boot volume is a software RAID, you can’t do this. Post for further instructions.
Safe mode is much slower to boot and run than normal, and some things won’t work at all, including wireless networking on certain Macs.
The login screen appears even if you usually log in automatically. You must know your login password in order to log in. If you’ve forgotten the password, you will need to reset it before you begin.
When you boot in safe mode, it's normal to see a dark gray progress bar on a light gray background. If the progress bar gets stuck for more than a few minutes, or if the system shuts down automatically while the progress bar is displayed, your boot volume is corrupt and the drive is probably malfunctioning. In that case, go to Step 5.
If you can boot and log in now, empty the Trash, and then open the Finder Info window on your boot volume ("Macintosh HD," unless you gave it a different name.) Check that you have at least 9 GB of available space, as shown in the window. If you don't, copy as many files as necessary to another volume (not another folder on the same volume) and delete the originals. Deletion isn't complete until you empty the Trash again. Do this until the available space is more than 9 GB. Then reboot as usual (i.e., not in safe mode.)
If the boot process hangs again, the problem is likely caused by a third-party system modification that you installed. Post for further instructions.
Step 4
Sometimes a boot failure can be resolved by resetting the NVRAM.
Step 5
Launch Disk Utility in Recovery mode (see Step 1.) Select your startup volume, then run Repair Disk. If any problems are found, repeat until clear. If Disk Utility reports that the volume can't be repaired, the drive has malfunctioned and should be replaced. You might choose to tolerate one such malfunction in the life of the drive. In that case, erase the volume and restore from a backup. If the same thing ever happens again, replace the drive immediately.
This is one of the rare situations in which you should also run Repair Permissions, ignoring the false warnings it may produce. Look for the line "Permissions repair complete" at the end of the output. Then reboot as usual.
Step 6
Reinstall the OS. If your Mac was upgraded from an older version of OS X, you’ll need the Apple ID and password you used to upgrade.
Step 7
Repeat Step 6, but this time erase the boot volume in Disk Utility before installing. The system should automatically reboot into the Setup Assistant. Follow the prompts to transfer your data from a Time Machine or other backup.
Step 8
This step applies only to older Macs (not current models) that have a logic-board ("PRAM") battery. Both desktop and portable Macs used to have such a battery. The logic-board battery is separate from the main battery of a portable. A dead logic-board battery can cause a gray screen at boot. Typically the boot failure will be preceded by loss of the startup disk and system clock settings. See the user manual for replacement instructions. You may have to take the machine to a service provider to have the battery replaced.
Step 9
If you get this far, you're probably dealing with a hardware fault. Make a "Genius" appointment at an Apple Store to have the machine tested. If you can't get to an Apple Store, go to another authorized service provider.

How to update link and import data of relocated incx file into inca file?

Subject : how to update link and import data of relocated incx file into inca file.? The incx file was originally part of the inca file and it has been relocated. ------------------- Hello All, I am working on InDesignCS2 and InCopyCS2. From indesign I am creating an assignment file as well as incopy files.(.inca and .incx file created through exporing). Now indesign hardcodes the path of the incx files in inca file.So if I put the incx files in different folder then after opening the inca file in InCopy , I am getting the alert stating that " The document doesn't consists of any incopy story" and all the linked story will flag a red question mark icon. So I tried to recreate and update the links. Below is my code for that //code start***************************** //creating kDataLinkHelperBoss InterfacePtr<IDataLinkHelper> dataLinkHelper(static_cast<IDataLinkHelper*> (CreateObject2<IDataLinkHelper>(kDataLinkHelperBoss))); /** The newFileToBeLinkedPath is the path of the incx file which is relocated. And it was previously part of the inca file. eg. earlier it was c:\\test.incx now it is d:\\test.incx */ IDFile newIDFileToBeLinked(newFileToBeLinkedPath); //create the datelink IDataLink * dlk = dataLinkHelper->CreateDataLink(newIDFileToBeLinked); NameInfo name; PMString type; uint32 fileType; dlk->GetNameInfo(&name,&type,&fileType); //relink the story InterfacePtr<ICommand> relinkCmd(CmdUtils::CreateCommand(kRestoreLinkCmdBoss)); InterfacePtr<IRestoreLinkCmdData> relinkCmdData(relinkCmd, IID_IRESTORELINKCMDDATA); relinkCmdData->Set(database, dataLinkUID, &name, &type, fileType, IDataLink::kLinkNormal); ErrorCode err = CmdUtils::ProcessCommand(relinkCmd); //Update the link now InterfacePtr<IUpdateLink> updateLink(dataLinkHelper, UseDefaultIID()); UID newLinkUID; err = updateLink->DoUpdateLink(dl, &newLinkUID, kFullUI); //code end********************* I am able to create the proper link.But the data which is there in the incx file is not getting imported in the linked story.But if I modify the newlinked story from the inca file,the incx file will be getting update.(all its previous content will be deleted.) I tried using Utils<IInCopyWorkflow>()->ImportStory() ,But its import the incx file in xml format. What is the solution of this then? Kindly help me as I am terribly stuck since last few days. Thanks and Regards, Yopangjo

>
I can say that anybody with
no experience could easily do an export/import in
MSSQLServer 2000.
Anybody with no experience should not mess up my Oracle Databases !

HT4796 Help needed with Migration Assistant, can't find files?

I've just purchased my first Mac (macbook Pro 15in) so please be kind, I'm so clueless it's ridiculous! Using migration assistant I've transfered aprox 100GB of files from my PC which seemed to take about 2seconds, but have no idea where they are or how to access them. The files were mostly music but when I opened itunes there is nothing in my library. The rest of the stuff was pics, docs, email accounts but none of that seems to be there either.. From the few articles I've read I seem to have somehow created another user account which is labeled Guest User/Sharing only, but I can't seem to log in as that user to find the files.. What have I done?! HELP!!

Congratulations!
... Using migration assistant I've transfered aprox 100GB of files from my PC which seemed to take about 2seconds, but have no idea where they are or how to access them.
It sounds as though Migration Assistant did not do a thing. With Migration Assistant, 100 GB will take time, no matter how the two computers communicate it will be at least an hour. Probably more. I recommend you connect them both to a wired network and make sure the PC is really using it. Wireless will take a lot longer.
I suggest you read the following step by step. On your Windows PC, you will need to download Migration Assistant. That link and everything else you need to know is in this document: OS X Lion: About Windows Migration Assistant. Follow its instructions to the letter.
The "guest" user is a feature of OS X and will not contain your files. Don't concern yourself with it.

Pb with migration assistant

Hello,
I try to install a new Macbook Pro with Migration Assistant.
I connect the Ethernet cable between macbook pro Lion (Source) and macbook pro Lion (Target) and i start.
When i arrived on the screen Transfer Information to this Mac, i select "From another Mac" and i launch Migration assistant in the source.
The target view the source but source can't view target.
I have always "looking for another computer" and nothing.
Thanks for your help.

Hi,
Sorry for my mistake with Pb, I'm frenchman and it's the first time I write a post..And sorry if my english is not correct... If you understand me...it's perfect
So, in the Pondini's Setup New Mac,(thank you very munch for that) he wrote :
Usually, the best way is to use Setup Assistant, when you first start up your new Mac. It will set the new Mac up just like the old one: all configuration, settings, users and data, and all applications (except newer versions already installed).
I make that, but nothing.
So I select "Do not transfer the know", and when I created the user, I do not choose the same as the source, otherwise there are a problem with migration assistant. and after, I used Migration Assistant to install all applications, configurations...But I think it isn't normal.
Today, i will try to install a new Mac with Time Machine.
Thanks for your help

Reinstalled and Imported Data with Migration Assistant, What went wrong?

Similar Messages

Maybe you are looking for