Reinstalled DW; now site files won't show
My hard drive recently failed, but I had all my files backed
up. I installed a new HD, and then reinstalled DW. I updated my
website, but when I went to Put the files to the server, I noticed
that no files or tools were showing in the usual Files panel. I'm
guessing that because it's new installation of DW, there's no
history. I apologize if this is a really amateur question; I'm just
a very frustrated teacher out of ideas. Thanks for any
advice.
I updated my website, but when I went to Put
> the files to the server, I noticed that no files or
tools were showing in the
> usual Files panel. I'm guessing that because it's new
installation of DW,
> there's no history.
You will need to define the site using dw
menu-->Site-->Manage Sites
set the Local Site Folder to where you have put the backups
of the site
assets.
You may want to do a link check of your site, and change the
pulldown in the
Results window to External files- to see if your edits when
there was no
site defined caused any paths like file:/// to be made. Just
do a find in
source for file:/// to see if it happened.
Alan
Adobe Community Expert, dreamweaver
http://www.adobe.com/communities/experts/
Similar Messages
-
I updated my iphone 4s to iOS 7.1.1 and my macbook pro to version 10.7.5 and now my iphone won't show up as a device on my computer. How do I fix this?
Hey KAYLIEH,
Thanks for the question. I understand that your iPhone 4s is not recognized in iTunes for Mac. The following resource may provide a solution:
iOS: Device not recognized in iTunes for Mac OS X
http://support.apple.com/kb/ts1591
Thanks,
Matt M. -
I just used stellar phoenix mac data recovery and it seemed to work but now my files won't open. Even though they are "jpeg, mov" files, the error message is "could not be opened". The movie's file format isn't recognized. " Any help or are they corrupted?
Sounds to me like the file is probably corrupt. If you had hard drive corruption or damage, that could easily result in recovered files not being fully intact. If you were trying to recover accidentally deleted files, it's possible they might have been partially overwritten before recovering. There are never any guarantees with file recovery.
Without more information on the circumstances that led you to try recovery, it's hard to give advice on what to try from here. You could always try another file recovery tool, like Data Rescue 3. Just be sure you're taking appropriate precautions when doing recovery. See Recovering deleted files. -
Just down loaded 10.8.5 and now secret files won't allow me to change document status
Just down loaded 10.8.5 and now secret files won't allow me to change document status.
Just down loaded 10.8.5 and now secret files won't allow me to change document status.
-
I got frustrated when changing my password and ended up getting about five e-mails from Apple, saying the same thing. Now my ipod won't show up in the itunes window.
Device not recognized
http://support.apple.com/kb/TS1538 -
7d CR2 files won't show in Bridge CS4
I've run updates through Photoshop and Bridge trying to get my 7D photos to show as thumbnails in Bridge. They simply won't show and I can't find a way to make them show. When I try and open a CR2 file, the image opens in ACR 5.7, which i know isn't the latest version, but when I try to run updates again, it tells me there are no updates to install. Help!
clearyjohnp wrote:
…I found my CS4 had ACR v5.2...so I downloaded the v5.6 update…
You should be running ACR 5.7, not 5.6.
All updates to ACR contain unannounced, unpublished bug fixes and improvements, not just support for new cameras. You should always run the latest version of ACR your version of Photoshop supports.
Wo Tai Lao Le
我太老了 -
Finder all my files won't show microsoft documents
Since installing Yosemite on my Macbook Air, when I open the finder window to see my recently opened files (all my files), it won't show any word or excel files; only pictures and pdfs. Can anyone help me to fix this?
Since installing Yosemite on my Macbook Air, when I open the finder window to see my recently opened files (all my files), it won't show any word or excel files; only pictures and pdfs. Can anyone help me to fix this?
-
Hi there,
I upgraded to CS3 last week and updated some copy on the page
below. Only just noticed, that the Flash file isn't showing up on
the page anymore. Any idea why?
PAGE
LINKDon't. Put the script back in. It works fine *IF* you also
upload the
Scripts folder, as you are told by DW when you initially
insert the Flash on
the page.
Murray --- ICQ 71997575
Adobe Community Expert
(If you *MUST* email me, don't LAUGH when you do so!)
==================
http://www.dreamweavermx-templates.com
- Template Triage!
http://www.projectseven.com/go
- DW FAQs, Tutorials & Resources
http://www.dwfaq.com - DW FAQs,
Tutorials & Resources
http://www.macromedia.com/support/search/
- Macromedia (MM) Technotes
==================
"unknown72" <[email protected]> wrote in
message
news:f9uotr$9ge$[email protected]..
> Found the solution after reading another thread on here.
Apparently, the
> new
> version of Dreamweaver automatically adds a script now.
I deleted the
> script
> and it works fine now...
>
>
> "<script type="text/javascript">
> AC_FL_RunContent(
> 'codebase','
http://download.macromedia.com/pub/shockwave/cabs/flash/swflash.cab#
>
version=9,0,28,0','width','400','height','335','title','Map','src','/images/new/
> events/donations/map','quality','high','pluginspage','
http://www.adobe.com/shock
>
wave/download/download.cgi?P1_Prod_Version=ShockwaveFlash','movie','/images/new/
> events/donations/map' ); //end AC code
> </script><noscript>"
>
> -
I didn't safely eject my external hard-drive as my imac was in sleep mode and I thought it was shut-down. Now I have turned up to uni and plugged my hard-drive into the uni computers (apple) and the word document I was working on last night (before my computer went to sleep mode, and it may still have been open, I cant remember) is gone.....
I have phoned home and got a family member to try and recover the file. They said they can see it when they open Word under recent documents, however its "ghost" and nothing happens when you click on it.
My question is, when I go home and plug my hard-drive back into my imac, will I be able to recover this word file? or have I lost it forever?I only saved it to my external hard-drive and saved it at the completion of working on it. However left the document open, went to dinner, and this morning pulled the hard-drive out, whilst the computer was asleep not shut-down and now the file doesn't appear.
I thought when I clicked save then it saved straight away, therefore anything i do after that point (ie a un safe ejection) shouldn't make a difference. Clearly, no matter if you saved the document, if you un-safely eject the hard-drive then the file is lost anyway? -
Updated to Yosemite and now my iPhone won't show up in iTunes. Visible in iPhoto though
So i've updated my iMac to Yosemite and everything is running the latest operating system. When I plug my iPhone 6 in it is visible in iPhoto but won't show up in iTunes, Any ideas? Much appreciated
Try Here http://support.apple.com/kb/TS1538
-
Downloaded Snow Leopard and now mp3 files won't play or open.. help!
Once I updated my system to Snow Leopard, my downloaded mp3 files won't transfer to iTunes or even play in general, they used to automatically download into my iTunes. Is there a specific setting I need to change?
What happens when you try to play in iTunes? Do you get any error messages? Can you play the mp3s in Quicktime or VLC?
If you want iTunes to play your mp3s, the setting for that is inside iTunes Preferences.
Have you tried repairing permissions and restarting your computer? -
URGENT PROJECT DUE TODAY.
iMovie crashed while I was working on a project, now I can't c the file in iMovie, however I can see it in Finder and moved to the movie folder, but it still doesn't show in my iMovie library or project list and nothing will open it. It is listed as a .rcproject and I cannot find how to open it. PLZ PLZ HELPWere you working with iMovie 9 or 10 when you had the crash?
It sounds like you were in iMovie 10 trying to update your iMovie 9 projects into iMovie 10.
If you were working in iMovie 10, see if you can still see everything with iMovie 9.0.9 (the 2 versions have completely different media file structures).
If you were in iMovie 9 it sounds as if the .rcproject package may have got corrupted. You can look inside the package in Finder with the "show package contants" contextual menu but I would not know how to repair it manually.
Do you have a backup or are you running time machine? With a backup you should be able to replace the offending package with a working version. -
I've been using iMovie '09 for more than a year and now .MTS files won't upload?
I've been using iMovie '09 for more than a year and each time I would plug in my SD card (using a card reader) the import box would open and I could select the clips I wanted to work with. Now, suddenly, today the import box won't open. Why??? I literally just used the exact same method three weeks ago and it worked fine. I have not done anything differently. Also, when I go to "file > import from camera" it only shows the built-in camera. What am I doing wrong? And how do I get my files? I do not want to download a converter of any time. I know there has to be a way because it literally just worked three weeks ago so I'm just trying to figure out why it won't work now.
Unfortunately, you cannot upgrade to Safari 5 or 6 on Mac OSX 10.4.11 and that is what you need to access iCloud (http://support.apple.com/kb/ht4759). I am not sure, but maybe you can install another and newer browser version of Firefox or Chrome to access iCloud.
-
Having trouble getting my music from seperate hard drive. Recently tried to have my new laptop see and play itunes on my wireless server, but not all music showed up, and now my music on my pc doesn't show all music either. Some wav files from ripping off cd, and some I've imported from windows media show up and all mp3 bought from store is there. But more than half is listed at bottom of library as unknown artist, unknown album etc.. WHATS UP!!!!
try backing up the adresses on a different computer.
1) connect iphone to computer
2) in itunes click "enable disk use"
3) locate the files in the iphone hard drive
4) copy and paste them on that computer
if it does wipe out your adress library, just revert to the backup. Although i don't know where the files will be on your iphone hard drive. -
Itunes files won't show up in the menu
to import music into a movie, i found out that the dropdown menu only shows me as available, the preinstalled Apple audio effects and short audio files in iMovie. How do i make other forlders and itunes files available to imovie?
imovie 11
mac osx 10.6.8This continues to get crazier by the minute! I completely deleted the event mentioned above and started from scratch. Impoerted a few clips into this new event and most played properly...but only for a few minutes! I got a call and afterward when I attempted to play clips in the timeline that had just played a minute ago there is now nothing happening!
Here's what they look like on the screen:
Some of them show an audio waveform but most do not. Does ANYONE have any idea what to do here????
I'm dead in the water!!!!!!!!
Here's my timeline:
Just a minute prior to taking this shot the all played perfectly and then they were gone!
Maybe you are looking for
-
Extremely slow performance in comparison to RDC-based report
Today our application uses the Crystal Reports RDC. In the last ten years we have made good experience with Crystal Reports. In the next few months we want to migrate our application to JAVA. Because the reports offer a great reuse-potential, we woul
-
Exporting Editted Video to Tape Error
Hi, I am really out of ideas. for months now after editing my programme on Final cut pro 5, when I want to master back to tape using the 'Print to video' option, it starts well. After some minuites into the mastering process, the whole screen will sh
-
Hi, I am getting an error OCI-22303 when trying to use OCITypeByName method. Basically I am trying to use publish-subscribe notification mode to get get notification whenever a new message comes in the queue. I am able to register my callback functio
-
What I've learnt so far and what I need to learn next.
Hi, I've been struggling with Extension Builder 3 for 2 days and have made some head way with it but I've got a long way to go. If you are a novice like me, this post will could provide some useful info, if you are an extension builder guru, skip thi
-
messaging girfriend and I can see she is replying because of the 3 dots, but didn't get a reply. I no she might of hit the space bar, but she said she wasn't typing, could this be bad signal ?