Reinstalled Network Monitor - Now I can't add any devices

Hey GuysI've been trying to troubleshoot a time sync issue I've been getting on one of my networks I'm managing.The error I'm getting on all machines is:
Log Name : SystemLog Source : Microsoft-Windows-Time-ServiceLog EventID : 50Log Time Generated : 5/07/2015 4:54:18 PMLog Message : The time service detected a time difference of greater than 5000 milliseconds for 900 seconds. The time difference might be caused by synchronization I'm 1x host with 3x VM servers. Host OS is VMWare. I've disabled the VM Host time sync in the VM settings. The host time is correct and holding.On the DC I've run the following command and it seems to be keeping time.net stop w32timew32tm /config /syncfromflags:manual /manualpeerlist:"au.pool.ntp.org, tic.ntp.telstra.net, toc.ntp.telstra.net"w32tm /config /reliable:yesnet start w32timew32tm /resync...

At DEF CON 23 this summer, an information security consultant plans to unveil ProxyHam, a hardware device that bears much promise for the future of web anonymity. Benjamin Caudill, who is founder and Principal Consultant for Rhino Security Labs, developed the product in response to the growing threats against web privacy, particularly those arising from […]…Read MoreThe post ProxyHam: A 2.5-Mile Leap for Web Anonymity appeared first on The State of Security.
Read More

Similar Messages

  • I got a virus on my PC and had to reinstall I-tunes.Now I can't add anymore

    I got a virus on my PC and had to reinstall I-tunes. Now I can't add any new songs onto my I-Pod Nano. After wiping the PC clean and downloading the I-Tunes again, it recognises my i-pod but the library is empty in the i-tunes player, but the songs are still on the ipod itself. I can add songs to the library but if I sync it, the songs are not added to the i-pod. However, for some reason, it will let me update the podcasts that I had already previously added to the ipod, does this help explain it a bit better

    I'm having the same problem and cannot find help. Please let me know if you figure it out.

  • I had to reinstall firefox and now i can't find any of my bookmarks.

    i had to reinstall firefox because i had reset my computer and now i can't find any of my bookmarks. what do i do? i need most of those for college and i don't remember them. i have a windows 8.1 computer and i'm not super teck savvy. i need the answer in techno idiot terms. help!

    Look on your desktop. Do you see a folder named '''Old Firefox?'''
    '''https://support.mozilla.org/en-US/kb/recovering-important-data-from-an-old-profile'''
    '''https://support.mozilla.org/en-US/kb/back-and-restore-information-firefox-profiles'''
    These can't get your data back, but will help in the future.
    These add-ons can be a great help by backing up and restoring Firefox
    '''[https://addons.mozilla.org/en-US/firefox/addon/febe/ FEBE (Firefox Environment Backup Extension)]''' {web link}
    FEBE allows you to quickly and easily backup your
    Firefox extensions, history, passwords, and more.
    In fact, it goes beyond just backing up -- It will actually rebuild
    your saved files individually into installable .xpi files.
    It will also make backup of files that you choose.
    '''[https://addons.mozilla.org/en-US/firefox/addon/opie/ OPIE]''' {web link}
    Import/Export extension preferences

  • I deleted all the music on my phone but now I can't add any of that music back. It says the songs are already on there, and they're visible in iTunes but I can't delete them or play them.

    The music is not on my phone and I've checked I selected 'show all music' and it's not there. But when I plug my phone into my laptop all the music that use to be there still appears in the music folder but I can't delete it. So now when I try to add some of that music back onto my phone, a thing pops up saying iTunes cannot add any songs to the iPhone  because it already contains all the songs in the playlist “iphone”.

    I just realized I have a different iCloud account set up on my phone. The one on my Macbook is the one associated with my ITunes account. Could this be the problem?

  • I just updated to IOS 5 and now I can't add any contacts?

    So I have a iPhone 3GS, and I just updated the software to the new IOS5 using itunes, and i just got a new contact to add, but when i open contacts, there is no longer a button to add any contacts, I've seen that other also have this problem, and ideas? thank you in advance guys!

    Just go to "Settings" then "iCloud" and switch on "Contacts", wait until done and then switch off.
    Select "Keep in my iPhone" in the message that appears. It would be fixed.
    The same procedure (but with calendars switch) would enable the "+" button in calendars if it is missing.

  • HT5622 had not used my itunes in awhile and the other day I was not able to access my itunes account, had to reinstall itunes and now I can not find any of my apps that I had in my library.

    Have not accessed my itunes account in some time, the day I found that I could not get itunes to run or even open up, I then tryed to reinstall itunes to my computer, I then was able to access my account and some of my library, but not any of my APPS??? How does one recover APPS lost in a reinstall.

    Are the files still physically on your HD?
    [User]/Music/iTunes/Media/Music is the default location. Unless you suddenly have a bunch of new "free space" on your hard drive, they're still where they were, you just need to create a new library file.

  • I tried to add a song to my iTunes, but now I can't add any albums, any help?

    I added a song to iTunes, but it froze and says "Determining Gapless Information" and not doing anything. I've tried restarting my lappie, un-installing and re-installing iTunes... I tried to delete the song, but it's not doing anything. Any help on this issue? How can I delete the song?

    Rahul ~ Welcome to the Support Communities. This Apple document may help:
    Using Touch ID on iPhone

  • I downloaded IOS8.1 and Itunes 12.01.26, now i can not add any music to my iphone that isn't in the cloud.

    I've restarted everything, resigned in and out of everything and re downloaded iTunes,  ITunes won't see any music that is currently on my iPhone 5c  and it will not let me put any music on my IPhone that isn't in the cloud.

    Are you trying to sync with a different computer?
    The iphone will sync with one computer.  Syncing to another will erase the current content.
    The music sync is one way - computer to iphone.  The exception is itunes purchases.  File>Transfer Purchases

  • Can't add any devices to iSync

    Hi - i've recently stoppped using my Mac Mini and gone back to my 12" Powerbook. I'd like to be able to sync my phone to my Mac, but I can't. I have the latest version of OSX and iSync 2.1, and I know my Sony Ericsson phone is compatible because I've used it with the same software on my Mac Mini.
    The phone pairs with my Powerbook, and I can use Bluetooth file exchange, but when I open iSync, and select NEW DEVICE from the menu, nothing happens. no windows appear at all.
    I've tried...
    - rolling back to an earlier iSync version (it wouldn't let me since there was a newer version installed
    - trashing iSyncs preferences (the ones i could find anyways)
    - reinstalling 10.4 and reupgrading
    - reinstalling iSync 2.1
    So any ideas??

    Yes, I figured out that iPod syncing moved to iTunes.
    However, iSync does NOT recognize my phone (v265) via the USB cable. System profiler sees the phone fine. I guess this is a problem since Tiger for my supposedly supported phone:
    http://www.macfixitforums.com/php/showflat.php?Cat=&Board=Forum23&Number=676983& page=0&view=collapsed&sb=5&o=31&fpart=1
    So now I'll have to jump through all these hoops using USB Prober and self-editing of the app just to get it to work the way it did right before the upgrade to Tiger. Good thing I'm technically savvy. Others in my situation might not have it as easy.

  • I have two apple id's one from my old laptop and one from my iPhone. I saved my iTunes library to my external hard drive and then tried to transfer it to my iMac. My music skips like a scratched cd now and I can't add any to my iPhone. Help please!

    I have two apple id's one from my old laptop and one from my iPhone. I saved my iTunes library to my external hard drive right before my old mac laptop died and then tried to transfer it to my new iMac. Now when I try to play my old music it skips like a scratched cd. Also, now I can't add any music to my iPhone unless it was purchased recently through itunes and downloaded through icloud. I tried to "Organize" my library in hopes of correcting the problem but my iMac just ejects my external harddrive part way through. Please help!

    Ejects the harddrive?
    Of what did your old Mac die?
    It sounds to me like you have some file corruption somewhere.  Either in the transfer of your library to the external or the external itself is flaky if it keeps ejecting.

  • Just updated to iTunes 10.2.1 and now can't add any new songs.

    My MACbook is running 10.5.8 and just last week I updated to iTunes 10.2.1 but now I can't add any new songs at all. I go through the motions but when I check the "recently added" checklist, it's blank. The song is never added to my iTunes library. Is there a fix for this?

    RESOLVED.
    I tried updating iTunes to 10.2.2 thinking this might somehow help me but same situation. Upon further investigation, the set of MP3s I was trying to add didn't  have the typical MP3 logo on them. When I tried to delete them from my system, it said "in use by application". I forced a delete. I copied the MP3s again to my MACbook and this time was successful in adding them. Looks like it was a bad set of MP3s and not iTunes.

  • HELP! I can't add any clips to the storyline.

    It used to work fine, dragging clips to the storyline or using Insert or Append.
    Now I can't add any clips to the storyline, dragging doesn't seem to drag any clips, Append and Insert don't react.
    I create a new project, and I see the storyline, but can't add anything to it.
    Using FCPX 10.1.1
    on MacBook Air 2012.
    OSX Mavericks.
    thanks,
    Erez.

    Post screen shots of what's happening in FCP, timeline, browser.

  • Can't add any users while logged in as the ADMIN

    Back in my post, http://discussions.apple.com/message.jspa?messageID=5314598#5314598 , I was stuck in a broken auto login, unable to get past the solid blue screen. I was able to fix that but now I can not add any new users to the accounts pane. Logged in as the ADMIN, I click on the + and nothing happens. I can not add anymore accounts. What can I do to solve this?

    It is probably some residual effect from your single user mode actions detailed in your previous post.
    Run *Repair Permissions* from Disk Utility to see if that is the cause.
    If that doesn't fix it, try deleting the com.apple.loginwindow.plist from your admin account's Library/Preferences folder.
    There is also the same file in
    HD/Library/Preferences/com.apple.loginwindow.plist
    but I am not sure about the consequences of deleting that, as I've never done it.
    Whichever you delete, log out and log back in again to re-create them.

  • Just updated to 8 & now I can't open any web pages & firefox is still running in the background after browser was closed. I uninstalled and reinstalled as well as disabled add-ons and plugins nothing has changed, can I downgrade back to on older version?

    Just updated to 8 & now I can not open any web pages as well as firefox will not close out, it still running in the background after browser was closed. I uninstalled and reinstalled as well as disabled add-ons and plugins nothing has changed, can I downgrade back to on older version?

    See "Hang at exit":
    *http://kb.mozillazine.org/Firefox_hangs
    See "Firefox hangs when you quit it":
    *https://support.mozilla.com/kb/Firefox+hangs
    A possible cause is security software (firewall) that blocks or restricts Firefox or the plugin-container process without informing you, possibly after detecting changes (update) to the Firefox program.
    Remove all rules for Firefox from the permissions list in the firewall and let your firewall ask again for permission to get full unrestricted access to internet for Firefox and the plugin-container process and the updater process.
    See:
    *https://support.mozilla.com/kb/Server+not+found
    *https://support.mozilla.com/kb/Firewalls

  • I entered the incorrect password for my home wifi network and now I can't change it. How do I clear out the wrong password so that I can enter a correct one?

    I entered the incorrect password for my home wifi network, and now I can't change it. How do I clear out the wrong password so that I can enter a correct one?

    Settings > wi-fi  then tap on the little blue arrow next to the network you want to change. You have to tap on the blue arrow and not on the name.
    Now at the top tap on "forget this network".
    After that, the iPhone will think your home network is a new network and will ask you for the password to connect.

Maybe you are looking for

  • How to set mp3 music file as a ringtone

    I am very surprised I cannot find any option how to set ringtone of my choice in the phone? is there really any way ?

  • Sybase oracle heterogeneous connection

    Hi all, I created a connection from oracle to sybase using oracle heterogeneous connection. However I have a problem with numeric characters, I cannot get floating parts of numbers. when I use create as syntax it maps to correct data types(with the c

  • Zip file exxtracting error of these two zip files

    Hi i download both zip files. when i click on these zip files, i receive a messeage that "NO ZIP FILE, BAD ZIP FILE OR PART OF A SPANNED/SPLIT ZIP FILE". When i try to extract it again show me error . Please guide me. when i download it , it download

  • Org Chart link not coming for the user

    Hi I am trying to configure the Org Chart by Nakisa. The connection to SAP has been established using Single Sign-on. I am able to log-on successfully as a user. But I only get the 'Preferences' link under Quick Start but not the 'Org Chart'. Any ide

  • Form level trigger

    Hi all, I need trigger function, their execution preference at form level. and when we execute query and go to next record which trigger fires at this stage at form level. Regards Rizwan Ali