Reinstalled software - error message file too new to support this version of the application

program was not rendering files in the timeline so i reinstalled the program.
reinstalled software, tried to open project i was working on and error message read: file to new to support this version of the application.
reading the maunual in advance, had recommended updating software prior to installing the program....
what to do??? need to continue working on the project...

You can't get it to upgrade to 4.01 (the latest/last version)?
Should be doable through Software Update, unless you have either moved or renamed the FCE app from its original installed position.
Also try using disk utility to fix permissions on your system drive and try the update again.
Often times when you re-install the software there are legacy files left over from the previous installation. this might be the problem.
Consider downloading FCS remover (free) from Digital Rebellion:
http://www.digitalrebellion.com/fcsremover/
and the re-installing your FCE software from disc and then trying the update.
MtD

Similar Messages

I have updated to OS X 10.9 and now can't open Aperture, message reads You can't use this version of the application "Aperture" with this version of OS X. You have "Aperture" 3.2.3... all i need to know is how to get Aperture to work again..help !

I have just updated to OS X 10.9 and now find that I can't open Aperture to access photos etc, message reads : You can't use this version of the application "Aperture" with this version of OS X. You have "Aperture" 3.2.3... whichj is not a lot of help, i have limited technical ability and all i need to know is how to get Aperture to work again...help !

Software Update?

II downloaded the OS X version 10.9 and my iPhoto version 9.2.3 will n.ot open. I get a message that I can't use this version of the application I photo with this version of OSX. What do I do now and how do I get the photos out of the old version?

I downloaded the OS X version 10.9 and my Iphoto version 9.2.3 will not open. I get a message that I can't use this version of the application I photo with this version of OS X. How do I upgrade to a i photo that will run on 10.9. Do I purchase a new program or can I do just an download?

Check the "Purchases" page in the Mac App Store and see if there is a more recent version there already waiting for you.

I have just bought a 2011 iMac (2.5 ghz, 4gb) and logic express 9, and when i installed logic and tried to run it i had a message saying 'you can't use this version of the application logic express with this version of Mac OS X. How do i sort this out!?

I have just bought a 2011 iMac (2.5 ghz, 4gb) and logic express 9, and when i installed logic and tried to run it i had a message saying 'you can't use this version of the application logic express with this version of Mac OS X. How do i sort this out!? It is very frustrating as the main reason i have bought a mac is to use logic! Any help would be great as i am a complete novice when it comes to Macs!

You're probably on OS X Lion?
I had the same problem as you. I used Software Update to update Logic Express to the latest version, and then it ran without any problems.

Error message: File is not compatible with this version of Photoshop

When I try and reopen a psd file I have created, I get the message "Could not complete your request because the file is not compatible with this version of Photoshop"
Used to get this on occasional files using CS2, have now started getting it on CS3 files. The only way to get round it is to redo the work!
Am using Photoshop CS3, V.10 on a G5, OSX 10.4.11. Which is connected to a PC network.

Ran into the same message on files created by one of our designers. His computer needed a "cleansing" to stop corrupting files. Files were actually being corrupted locally, so it wasn't only a server issue...at least in our case. One thing that we did that "sort of" worked...we transferred the file to a PC and ran a shareware utility that repairs PSDs (Advanced PSD Repair Software). It said it repaired the file successfully, BUT it separated the files into a couple of hundred individual documents. Each layer and layer mask was a separate file. I didn't see any setting to recover as a composed file so I guess this is just how it works. If your file is not heavily layered and complex, I guess this might work for you, but, like I told the designer, I ain't goin' in there and reconstructing your layers. =) I know this doesn't help if you don't have access to a PC with Photoshop loaded in it, but thought this might help some poor soul along the way. Good luck...

TS2611 I re installed my Final Cut express software, now when I go to use my "halo" and "arrow" application I get a message that says the file format is too new for this version of the application. Anybody have suggestions?

I re installed my Final Cut express software, now when I go to use my "halo" and "arrow" application I get a message that says the file format is too new for this version of the application. Anybody have suggestions?

After install, did you go to Apple menu > Software Update to update your FCE to the latest version?
MtD

File's format is too new for this version of the application

A project that was edited in FCE on an iMac will not open in FCE on a MacBook Pro. When I try to open it, I receive the error: File's format is too new for this version of the application.
The FCE that was installed on the MacBook Pro is exactly same copy as the one loaded onto the above mentioned iMac -- they were each were installed from the same, Apple Store purchased disk.
Thanks for any help.
-Mike

Hi(Bonjour)!
Did you apply the FCE 4.0.1 update on both machines?
Michel Boissonneault

Error when trying to re-mount a VHDx (the version does not support this version of the file format)

Hi,
I have a vhdx on a NAS that I use for server backup. I created the VHDx via disk management, mounted it and assigned drive letter X. I now created a script that gets triggered upon startup via task scheduler to remount the VHD. If I try to mount it however,
it tells me this:
No matter what I try, I can't mount it. Double clicking just says this:
Eventviewer spits out error 137: The default transaction resource manager on volume X: encountered a non-retryable error and could not start. The data contains the error code.
How do I trouble shoot this? oO Originally I had created the VHD as expanding, where now I recreated it at it's full size of 900GB. Maybe that will make a difference.
Thanks for the help
Cheers
Maike

Hi Maike,
Do you mean that you can mount the VHDX via disk management but cannot mount it via a script? If so, please provide the diskpart’s mount commands in the script.
In the meantime, check if destination partition is NTFS formatted.
Problem with Attach VHD function: The version does not support this version of the file format
http://www.paulauskis.lt/2010/03/problem-with-attach-vhd-function.html
Please Note: Microsoft is providing this information as a convenience to you. The sites are not controlled by Microsoft. Microsoft cannot make any representations regarding the quality, safety, or suitability of any software or information found there.
Best Regards,
Mandy
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Subscriber Support, contact [email protected]
Hi Mandy,
I can not mount it after a reboot. So I create the VHDx via disc management and attach it afterwards without problem. After the server reboots and the attached VHDx dropps, I can't remount it. Gives me the errors I posted above.
As I had mentioned above, I recreated the VHDx at it's full size this time, rather than expanding. That worked just fine and I can remount after reboot.
So I consider this dealt with ;)
Thanks anyway!

Hi Ive downloaded the free trial version of Fcpro x and its not working, an error message comes up saying: You can't use this version of the application ''final cut pro trial'' with this version of OS X You have OS X 10.8.5. it requires 10.9 or later,Help

Hi friends.
Ive downloaded the free trial version of Final cut pro x and its not working, an error message comes up saying: You can't use this version of the application ''final cut pro trial'' with this version of OS X You have OS X 10.8.5. it requires 10.9 or later, please can anyone Help.

Just download Mavericks (10.9) its free and installed it (Mac App Store)

How do you solve error "You can't use this version of the application Install Mac OS X.app with this version of Mac OS X" when trying to go back to leopard from lion?

How do you solve error "You can't use this version of the application Install Mac OS X.app with this version of Mac OS X" when trying to go back to leopard from lion?
Local Mac shop said to hold down "c" after inserting disk to get "disk utility" to come up in order to wipe hard drive. I can't seem to get it to do this.

This W7 was purchased for using Fusion, as others did - per reviews from amazon. The technician today called their contact at VMWare - Fusion not officially for use with Lion - even though I read at the VMWare support site that others have made it work. Apparently my setup doesn't work.
Do you know how to do the proceedure for bringing up the disk utility when starting the disk?
BTW, some of the windows applications I want to continue using are Incredimail, Calendarscope, Stamps.com and a few others I have used over many years. What do you use for email and calendar?
Wow, sounds like another reason to not use MS Windows.
Regarding your Disk Utility question, please elablorate I'm not sure what you're trying to do. Disk Utilty is just that...a utility, it's something most users never have to use especially on a new computer. Let me know what you're trying to do there before I give you some instructions.
As for as your Windows apps I would recommend using Mail and iCal, both come as part of OS X and are very robust tools. Don't discount the software built right into OS X it's very robust and powerful not all like the bloatware most Windows boxes ship with. Stamps.com well I'd look for another alternative. It's clear they don't support OS X which makes me a little suspicious that they're so behind the times.
Also if you have not been exposed to these links before I'd strongly recommend bookmarking them and using them. They're extermely useful!
Switch 101
Mac 101
Find Out How Video tutorials

You can't use The following message is stopping me access my disk utility. 'this version of the application "Disk Utility" with this version of OS X.' not only that my Mac pro keeps dropping my internet connection and logs on to BT Open.

After installing Yosmite, The following message is stopping me accessing my disk utility. 'You can't use this version of the application “Disk Utility” with this version of OS X.' you have “Disk Utility” 12.1.1.
not only that my Mac pro keeps dropping my internet connection and logs on to BT Open.
Help

For whatever reason you don't have the Yosemite version of Disk Utility which is 13. I suggest you reinstall Yosemite.
Reinstalling OS X Without Erasing the Drive
Boot to the Recovery HD: Restart the computer and after the chime press and hold down the COMMAND and R keys until the menu screen appears. Alternatively, restart the computer and after the chime press and hold down the OPTION key until the boot manager screen appears. Select the Recovery HD and click on the downward pointing arrow button.
Repair the Hard Drive and Permissions: Upon startup select Disk Utility from the main menu. Repair the Hard Drive and Permissions as follows.
When the recovery menu appears select Disk Utility. After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list. In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive. If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported click on the Repair Permissions button. Wait until the operation completes, then quit DU and return to the main menu.
Reinstall OS X: Select Reinstall OS X and click on the Continue button.
Download and install the 10.10.1 update.
Note: You will need an active Internet connection. I suggest using Ethernet if possible because it is three times faster than wireless.
Check that you have the current version of Disk Utility.

Got message... you can't use this version of the application mail with this version of Max OS X, after i upgraded operating system to MAC OSA X Snow leopard. How do I get my Mail?

Hi ...just upgraded my Macbook pro to Mac OSX snow leopard and when I tried to look at my mail, I got this message "You can't use this version of the application mail with this version of MAC OS X". What do I do now to look at my mail and receive new mail?

After updating make sure you repair permissions and restart your computer.

InApp Error on Android: This version of the application is not configured for billing

Hi,
My App runs on Android. Free publications can download, but when I publish a folio to sell, it appears on the Android device and it gives the message: "This version of the application is not configured for billing"
I used the (long) app license code at the API section and pasted it into the android Public Key aria in the DPS Admin.
Then I logged out and logged in again.
Any Ideas what could be wrong?

On google console check merchant account and see if all the bank and tax information settings are filled correctly.

Logic Pro 9 (9.0.0). Message You can't use this version of the application Logic Pro 9 with this version of Mac OS X You have Logic Pro 9 9.0.0. I have been told that I can use the Logic Pro 9.1.4 Update (.dmg) which you can download from Apple Logic

Since upgrading to lion, I can't use Logic pro, hope someone can help. thank you
Logic Pro 9 (9.0.0).
Message
You can't use this version of the application Logic Pro 9 with this version of Mac OS X
You have Logic Pro 9 9.0.0.
I have been told that I can use the Logic Pro 9.1.8 Update (.dmg) which you can download from Apple Logic Support, although when I try to upgrade my I get this message:
An eligible Logic Pro version was not found in the Applications folder. This update requires Logic Pro version 9.0 or higher.

Since upgrading to lion, I can't use Logic pro, hope someone can help. thank you
Logic Pro 9 (9.0.0).
Message
You can't use this version of the application Logic Pro 9 with this version of Mac OS X
You have Logic Pro 9 9.0.0.
I have been told that I can use the Logic Pro 9.1.8 Update (.dmg) which you can download from Apple Logic Support, although when I try to upgrade my I get this message:
An eligible Logic Pro version was not found in the Applications folder. This update requires Logic Pro version 9.0 or higher.

Unable to open mail, address book etc due to this message: You can't use this version of the application Address Book with this version of Mac OS X. HELP!

I am transferring my mother's address book and mail etc to my computer from an external hard drive enclosure and am not able to open it due to this message: You can't use this version of the application Address Book with this version of Mac OS X. HELP! Is there a way to open her older applications and get the info out?

her email is in user>Library>Mail folder. Hopefully you've created another user on your Mac for your mother so she would have her own user Library.

Reinstalled software - error message file too new to support this version of the application

Similar Messages

Maybe you are looking for