Reinstalling CS2 on new hard drive from download. Disk 1 installs and asks for Disk 2 which I can't get to install.

I'm trying to reinstal CS2 on my newly replaced boot drive from a download. Disk 1 installs and then request me to insert Disk2. How do I direct it to the disk2 download?

move the unzipped contents of all three files to the same directory. then install.

Similar Messages

  • I reinstalled my system on a new hard drive, from time machine. However my old photos seem corrupt within aperture. iphoto seems okay.  Have you heard of this?

    I reinstalled my system on a new hard drive, from time machine. However my old photos seem corrupt within aperture. iphoto seems okay. New photos take a long time to load as well.
    Have you heard of this?
    Thanks

    We need a little more information to be able to help.
    However my old photos seem corrupt within aperture.
    What kind of corruption? And when do you see it? All your images, or only some? Are the images distorted, discolored, or not displayed at all?
    Are you shooting in raw? Is your library referenced or managed? Is your library on your system volume or on an external harddrive?
    And it would help to know your MacOS version and Aperture version too.
    Regards
    Léonie

  • HT1229 My iPhoto Library (version 8.1.2) is 280GB (greater than 50% of my 500GB total storage memory on my iMac.  It was too large for me to drag it to a new hard drive so the Apple geniuses did it for me.  However they did not delete the Library from my

    My iPhoto Library (version 8.1.2) is 280GB (greater than 50% of my 500GB total storage memory on my iMac.  It was too large for me to drag it to a new hard drive so the Apple geniuses did it for me.  However they did not delete the Library from my iMac (that's my responsibility).  I dragged it to Trash and when it started to move I clicked over to the new hard drive to confirm it had indeed been copied.  I became nervous when I didn't see among the few files on this otherwise empty new hard drive anything that resembled a 280GB Library so I cancelled the migration to trash.
    How can I be sure that my iphoto has been copied and that all my "metadata" survived in tact?

    the new backup drive
    I thought the new drive would be your data drive to host the iPhoto library. Do you also use it for TimeMachine backups?
    I am unable to search either in email as well as Finder.  I AM able to search within iPhoto though, thankfully
    Spotlight may still be busy rebuildig its index.
    You could try to rebuild the Spotlight Index, if you do see no progress:
    Spotlight: How to re-index folders or volumes
    I hope, other frequent posters will drop in. I have not used iPhoto 8.x in long time.

  • I had a new hard drive fitted to my imac and restored it from my time machine back when I try to open itunes I get this message "the itunes library extras.itdb file is locked, on a locked disk, or you do not have write permission for this file"

    I had a new hard drive fitted to my imac and restored it from my time machine back up on an external hard drive when I try to open itunes I get this message "the itunes library extras.itdb file is locked, on a locked disk, or you do not have write permission for this file"

    To solve this issue all I did was check to ensure that the file permissions were set as described by the earlier posts, followed by simply deleting the iTunes Library Genius.itdb file.  Once the file was deleted I was able to open iTunes without difficulty.  Note that I am running Windows 8.  Hope this helps!

  • My old hard drive crashed.  How do you reload CS2 on new hard drive and get it activated?

    My old hard drive crashed.  How do you reload CS2 on new hard drive and get it activated?

    You'll need to get onto Support and explain, and if you have not made a habbit of asking, they'll reset your activations limit back to zero.  Or if you have only ever installed it once, you'll still have an activation to use.
    http://helpx.adobe.com/x-productkb/policy-pricing/activation-deactivation-products.html

  • I had to install a new hard drive on my macbook air and now I am getting unkown error whenever I try to login to itunes

    I had to install a new hard drive on my macbook air and now I am getting unkown error whenever I try to login to itunes. Apple support suggested I reset my password so I did that and still the problem is occuring. Itunes and the app store are working normally on my ipad and iphone. Does anyone know what the problem is. The new disk was installed in France coz I am on holiday there. could there be something I need to change in my settings? I need help urgently as I am trying to finish an assignment and need to be able to access and download from icloud.

    Hi Stacey,
    Thanks for visiting Apple Support Communities.
    You may find the tips in this article helpful with resolving the error you're seeing:
    iTunes Store: "An unknown error occurred (-9808)"
    http://support.apple.com/kb/TS2753
    Best,
    Jeremy

  • Apple put a new hard drive into my MacBook Pro and updated the system to Maverick. They did not put iPhoto and iWeb on it but I did have it in Lion. Why and what am I supposed to do?

    Apple put a new hard drive into my MacBook Pro and updated it from Lion to Maverick. They did not put iPhoto and iWeb on it but I did have it in Lion. They also didn't put Pages, Keynote or Numbers back on it until I argued with them. Of course, I didn't have my data backed up. My hard drive was destroyed when I tried to install the update of Mavericks myself. I should not have to buy iWeb and iPhoto when I already had them. Suggestions?

    cwhargrave,
    have you tried looking in the App Store, to see if you can redownload iWeb and iPhoto there gratis?
    If you haven’t done so already, you should purchase an external hard drive to act as a Time Machine backup destination, so that you’ll have an option to rollback to a working environment if a new OS installation is troublesome.

  • I recently installed a new hard drive in a MacBook 2007 and then 10.6.3. I'd like to be able to Sync iCal to the calendars I have created on other devices (new iCloud account and an ME account). I can't upgrade to 10.7 or 10.8 because the MacBook is 32bit

    I recently installed a new hard drive in a MacBook 2007 and then 10.6.3. I'd like to be able to Sync iCal to the calendars I have created on other devices (new iCloud account and an ME account). I can't upgrade to 10.7 or 10.8 because the MacBook is 32 bit. Just looking for a workaround as this is not a primary device.

    You should update to the latest version of Snow Leopard, 10.6.8 - you can download it here; however it's still not compatible with iCloud and though you can connect to access your email you cannot access any other of iCloud's facilities.
    However some people have been able to set up calendar syncing by using the method detailed here - this is an unsupported hack and may not be reliable, and may stop working at some future point. I've not tried it: use at your own discretion.
    To access the email:
    Entering iCloud email settings manually in Snow Leopard or Leopard
    Are you sure you can't upgrade to Lion? It requires an Intel Core 2 Duo processor, which you may well have, though it also needs 2GB RAM so you might need to add additional RAM (might not be worth it for what you want). The published specs don't mention 32 or 64 bit. You can buy Lion by ringing the Apple Store at the number at bottom left of this page.

  • I know my back up exists I can see it on disk utility but migration and disc utility wont work to restore my back up on my new hard drive it shows up with the message "this disk is already in use" i am so done. someone pls help me

    I know my back up exists I can see it on disk utility but migration and disc utility wont work to restore my back up on my new hard drive it shows up with the message "this disk is already in use" i am so done. someone pls help me

    Otherwise software may be attempted to access the drive. The the computer up in Safe Mode by holding shift when you turn it on. Also be sure to power off and on the hard drive itself.

  • HT3275 Since Installing a new hard drive on my 2008 macbook and reconnecting to to time capsule through time machine, I can only get backups since the install.

    Since Installing a new hard drive on my 2008 macbook and reconnecting to to time capsule through time machine, I can only get backups since the install.
    I receive a message saying identity of backup dis has changed and offers me the choice of either Don't back up or Use this disc.

    Time Machine treats any new drive like a new computer. It starts a completely new Time Machine backup. So you now have two backups - a new one and all your old ones.
    Visit Pondini's Time Machine FAQ for help with managing your Time Machine backups.

  • On imac 10.6.8 using current version of Aperture.  How can I access the Aperture Library  on my external hard drive that I use with time machine for backup?  I can only access the application but not the library..

    On imac 10.6.8 using current version of Aperture.  How can I access the Aperture Library  on my external hard drive that I use with time machine for backup?  I can only access the application but not the library..

    Go into Time Machine (the program not the bundle on the extrnal disk) and using Time Machine's browser go to the Folder where the library lives. You could look in the library bundle in Time Machine but that won't really tell you much,
    If you want to make sure it truely has backed up your library you will need to restore it and open the restored library with Aperture.
    If all this still has you confused you need to read up on Time Machine in order to get a feel for how it works, for what it is doing and for how to restore files from it.

  • I was charged for a movie that never was downloaded, i asked for it but the conection was too slow and I never was able to have the movie that i asked for...how can i get it without being charged again, who could remove the chage from my Crecit card?

    i was charged for a movie that never was downloaded, i asked for it but the conection was too slow and I never was able to have the movie that i asked for...how can i get it without being charged again, who could remove the chage from my Crecit card?

    You may not be able to get a refund, since the terms of sale for the iTunes Store state that all sales are final. You can contact the iTunes Store, explain the reason for your request, and ask, though:
    http://www.apple.com/support/itunes/contact.html
    It's possible they'll make an exception for you, particularly if the problem was on their end preventing the movie from downloading in a reasonable time.
    Good luck.

  • OS X Mavericks download has paused and will not restart. How can I get it to restart?

    OS X Mavericks download has paused and will not restart. How can I get it to restart?

    Welcome to Apple Support Communities
    First, see if the download is paused and if you can resume it. To do so, open the Mac App Store, go to Purchases and press "Resume" next to OS X Mavericks.
    If the download does not carry on, I would recommend you to restart and start the download all over again.

  • I pay to get music from Kazaa which uses a WMA format, when I try to add it to my Itunes it says that the songs is from a WMA format and Itunes uses AAC format, how can I get this music to my Itunes to put on my I-pod/

    I pay to get music from Kazaa which uses a WMA format, when I try to add it to my Itunes it says that the songs is from a WMA format and Itunes uses AAC format, how can I get this music to my Itunes to put on my I-pod/

    By converting the WMA files to AAC formatted files. 

  • Reinstalling Aperture on New Hard Drive (Downloaded Copy)

    Hello,
    I have an activated and legitimate copy of Aperture 2.1.2 (with serial number).
    I will be installing a new hard drive into my Mac Pro at the weekend and doing a clean install of Leopard.
    1) do I just download the trial version of Aperture and then enter my serial number to get the fully operational software?
    2) how do I rebuild my library / projects so that my pictures / tags etc. are recovered? I have been maintaining a Vault of my pictures. Do I just switch the external hardrive that that Vault is stored on and 'ask' Aperture to rebuild my library?
    Sorry of my terminology is less than correct / technically accurate!
    And thank you for your time,
    Adam

    No, your reasoning is right on target. My comment about cloning was addressed more to the discussion with Wes, but I had sensed you were probably wanting a clean install. I did the same thing to create a boot volume where I freshly installed every pro application (for me that is Final Cut Studio apps, Photoshop CS3 and Aperture, plus some others) and got them up and running before adding still other applications. My other Leopard boot volumes were based upon having upgraded Tiger to Leopard, and when I got Aperture 2, I wanted to start fresh. I must say that with the boot volume that I had created by an upgrade of a clone of a Tiger boot volume, that Final Cut Pro and Photoshop had worked fine, and I still use that Leopard boot sometimes.
    Ernie
    Message was edited by: Ernie Stamper

Maybe you are looking for

  • Printing a PDF from Word 2007

    Good Day, I have checked several forums and the help file, but I can't seem to get a straight answer on this issue.  Our office creates many documents in Microsoft Word 2007 that contain both typed text AND images.  For example, I have a document wit

  • System Update keeps failing "Package did not download" and does not show all updates

    I recently installed win8 64-bit on my X1 (1294-2PG) using a clean install formatting the hard drive. Now I want to use System Update to install right drivers. Two problems occur: System Updates fails to show all the updates available for my PC in th

  • Local class and function group

    I want to write a local class in a function group, where is the best place I put the code? thanks!

  • Pricing condition PBEW gets activated automatically

    Hi Guru's, We are on ECC 6 IS Retail solution. Scenario is every night the data from stores(PLANT) is send back(via IDOC) in SAP and Billing document is created ( with conditions in it) We have created a pricing procedure for data from Stores. What h

  • Can you please give me the suggested version #s of working DPS software parts?

    My latest app was already at iTunes before all the upgrade snafus started in January, so I held off on doing upgrades then. I'm starting a new app TODAY and would like to make sure I have the upgrades that are working properly installed. In Jan I was