Reinstalling iTunes 6 help
I installed the latest version (7) of iTunes and could not get it to show the music on my iPod. I tried to reinstall version 6 of iTunes that came with my iPod Nano by uninstalling iTunes 7. The reinstallation of 6 SEEMED to work ok until I tried to open iTunes. When I did I got this prompt..
The file " iTunes Libaray.itl " cannot be read because it was created by a newer version of iTunes.
Is there ANYONE that can help with getting iTunes 6 back so I can manage my iPod again???
Dell Windows XP
Dell Windows XP
Dell Windows XP
darjaz, check out this thread: http://discussions.apple.com/message.jspa?messageID=3245946#3245946
Macmenno has posted some instrutions that will help he is the one to help you, or post to that thread. I am not trying to take credit. Just I know how frustrated I was.
Good luck.
Similar Messages
-
Can anyone help with this. Lost count of how many times i have uninstalled itunes
Perhaps try the "Error -609" section in the Specific Conditions and Alert Messages: (Mac OS X / Windows) section of the following document:
iTunes: Advanced iTunes Store troubleshooting -
both my iphone or ipod is not detected by itunes unless itunes is updated/reinstalled. however whenever i restart my computer it seems itunes uninstalls itself or something and in order to detect my phone it needs to be reinstalled all over again. why is itunes uninstalling itself on my mac when it is restarted?
snow leopard.
Okay. In that case try the following document:
Mac OS X v10.6: iOS device not recognized in iTunes after restart -
While trying to update iTunes on my laptop, I'm being hit with an error that reads
"An error occurred during the installation of assembly 'Microsoft.VC80.CRT,version="8.0.50727.4053",type="win32,publicKeyToken="1fc8b3 b9a1e18e3b",processorArchitecture="x86". Please refer to Help and Support for more information. HRESULT: 0x800736b
I've constantly tried to troubleshoot it and it's still not working I even uninstalled my previous iTunes and now I'm left with no iTunes at all please help ASAPIt's a broken Windows Modules Installer then.
We've had some success with that one using the SCENARIO III treatment from the following document:
[Vista - Windows Update Error 80070424|http://www.vistax64.com/tutorials/258701-windows-update-error-80070424 -a.html]
I'd *strongly suggest* setting up a System Restore Point prior to doing that, though.
After doing the fix, stok up on Windows Updates. (The iTunes installation trouble is sometimes the first indication for folks of an issue that may have been going on for months, and with a broken Windows Modules Installer no Windows Updates will have been installing.)
(You may have to do your updates in several batches ... if your SP2 didn't install due to the Updates trouble, there's a bunch of updates that you won't see unless you get SP2 installed. So after installing updates, keep checking for Updates until you don't see any new ones showing for you.)
After you're stocked back up in that regard, try another iTunes install. Does it go through properly this time? -
R5034 Runtime error when updating ITunes help - deleted all iTunes/Apple programs and reinstalled ITunes
help please ?solved problems and reinstalled - 4 hours wasted trying to fix iTunes ...
Apple could do better to inform users when updating and upgrading ..... -
Since reinstalling itunes i can no longer sync. Error message says already synced with another itunes library. I get a blank sync - no songs, photos ect as it comes up with this error whenever try to select what is to be synced. Help - lost everything. Complete nightmare - Apple sort a fix NOW, but will take any help
Plawexki wrote:
... do you know if the contacts, photos, messages etc will be wiped?
Yes... Everything will be Wiped and Replaced with what is currently on Your Mac.
SYNCING with iTunes
See here > http://support.apple.com/kb/HT1386
From Here > http://www.apple.com/support/iphone/syncing/
You may find this information of interest...
Have a read here...
https://discussions.apple.com/message/18409815?ac_cid=ha
And See Here...
How to Use Multiple iDevices with One Computer -
I recently tried to update iTunes to 11.1, and am now getting an error message "This application has failed to start because MSVCR80.dll was not found. Reinstalling the application may fix this problem." I have uninstalled and reinstalled iTunes several times with no success. I am running Windows XP Svc Pack 3. Help please.
Click here and follow the instructions. You may need to completely remove and reinstall iTunes and all related components, or run the process multiple times; this won't normally affect its library, but that should be backed up anyway.
(99753) -
Since I installed ios 6.1 in my iPhone 4, I can't sync it with iTunes. Can annyone help me? I have already reinstalled iTunes and reseted the iPhone, but it still doesn't sync. Thank you.
Hello Sean,
It sounds like you are constantly needing to restore your phone because it keeps going into recovery mode. Usually putting a device into recovery mode and restoring it can help isolate an issue to your iPhone hardware if an issue persists afterwards. I would try manually putting it into recovery mode and restoring it 1 more time:
If you can't update or restore your iOS device
http://support.apple.com/kb/HT1808
If that does not resolve it the symptoms indicate to me that it is a hardware issue causing this to happen and would seek service for it:
iPhone Repair - Other Repairs
https://www.apple.com/support/iphone/repair/other/
Thank you for using Apple Support Communities.
All the best,
Sterling -
I can not open itunes on my computer. It started when an upgrade appeared. Now I get a message that states This application has failed to start because MSVCR80.dll was not found. Re-installing the application may fix this problem. I tried to reinsall the application but it did not help. I also get a message iTunes was not installed correctly. Please reinstall iTunes Error 7 (Windows error 126) Please Help me!
Click here and follow the instructions. You may need to completely remove and reinstall iTunes and all related components, or run the process multiple times; this won't normally affect its library, but that should be backed up anyway.
(99623) -
Title pretty much sums it up. I'm getting very frustrated. I've tried turning off the compatability of my Quicktime, and nothing is changed. Can anyone figure out the problem? I can't find an answer anywhere.
Yea i got that same message to Quicktime failed to initialize (error-2096) Quicktime is required to run itunes.Please reinstall itunes, which i did so many times which did'nt work and so i started reading some of the articles on this site. there was one article i read which says right click on quicktimeplayer and click on properties then click compatibilty tab and deselect checkbox or boxes but i only deseleted one box which reads windows vista .windows 2000 or 95 or whatever so i did that opened up itunes again and still i got the same error message then i started thinkin i wonder if i should do the same thing on the itunes player click on properties, click compatibilty tab then deselect box so i did. Open up itunes hey hey presto it open up alrighty only problem i lost all my music but lucklie at backed them up on another hardrive, on my ipod & Cds...Hopefully this will help you out or anyone else...
-
I have just purchased an iPhone 4, but it wasn't connecting to my iTunes, so I took advice and uninstalled iTunes. But when I am trying to reinstall iTunes, it keeps telling me that I cannot because I have a newer version of Quicktime installed. I cannot find this newer version anywhere, and have gotten rid of the Quicktime folder, but it is still refusing to install iTunes.
Please help, I have tried everything.But when I am trying to reinstall iTunes, it keeps telling me that I cannot because I have a newer version of Quicktime installed.
That's usually caused by damaged QuickTime installation configuration information on the PC.
Unfortunately, this sort of trouble has gotten more complicated to deal with ever since Microsoft pulled the Windows Installer CleanUp utility from their Download Center on June 25. First we have to find a copy of the utility.
Let's try Googling. (Best not to use Bing, I think.) Look for a working download site for at least version 3.0 of the Windows Installer CleanUp utility. After downloading the utility installer file (msicuu2.exe), scan the file for malware, just in case. (I use the free version of Malwarebytes AntiMalware to do single-file scans for that.)
If the file is clean, to install the utility, doubleclick the msicuu2.exe file you've downloaded.
Now run the utility ("Start > All Programs > Windows Install Clean Up"). In the list of programs that appears in CleanUp, select any QuickTime entries and click "Remove".
Quit out of CleanUp, restart the PC and try installing iTunes again. Does the install go through properly now?
(If you do find a clean download site for the correct version of CleanUp, please don't tell me where it is. Without wishing to sound paranoid (although I grant it does sound paranoid), there is a non-zero chance that posting links to download locations for the utility here at Discussions leads to that download location being shut down.) -
When I try and start iTunes after trying to intall the 11.4 update on my Windows 7 laptop, it says to reinstall iTunes and "Windows Error Code 193" I tried ave the same failed response. Can someone help?
Hi inharmony35,
If you are having issues with iTunes after an attempted update, you may want to try the steps in the following articles:
Apple Support: Removing and reinstalling iTunes and other software components for Windows Vista, Windows 7, or Windows 8
http://support.apple.com/kb/HT1923
Apple Support: Issues installing iTunes or QuickTime for Windows
http://support.apple.com/kb/HT1926
Regards,
- Brenden -
My phone is not showing up in itunes. I want to sync it. I have a MAC and I have restarted the phone, it's charged, I have the most current version of itunes. What do I do now? It says to reinstall itunes if you have windows but not for mac. Help!
With your phone plugged in, open Image Capture and see if the iPhone shows up. If not, you are having a sync problem. If it shows up in Image Capture, but not iTunes, I'd delete iTunes and reinstall it.
-
I had to reinstall itunes and now I get an error message when i try to open it please help
i had to reinstall itunes and now I get an error message when i try to open it please help
Please make sure to post the error message here, then we can help you decypher it.
You may want to make sure you're installing the right version of itunes. If you have a 64bit system, you will need to make sure to download and install the 64bit version of iTunes.
http://support.apple.com/kb/DL1427 -
Can anyone help me? The iTunes update corrupted my program. I uninstalled, and then reinstalled iTunes; only to find an error message about iTunes Helper. After several fruitless, repeat attempts, I am at a loss. Please help…
Many thanks.
With the Error 2, let's try a standalone Apple Application Support install. It still might not install, but fingers crossed any error messages will give us a better idea of the underlying cause of the issue.
Download and save a copy of the iTunesSetup.exe (or iTunes64setup.exe) installer file to your hard drive:
http://www.apple.com/itunes/download/
Download and install the free trial version of WinRAR suitable for your PC (there's a 32-bit Windows version and a 64-bit Windows version):
http://www.rarlab.com/download.htm
Right-click the iTunesSetup.exe (or iTunes64Setup.exe), and select "Extract to iTunesSetup" (or "Extract to iTunes64Setup"). WinRAR will expand the contents of the file into a folder called "iTunesSetup" (or "iTunes64Setup").
Go into the folder and doubleclick the AppleApplicationSupport.msi to do a standalone AAS install.
Does it install properly for you?
If instead you get an error message during the install, let us know what it says. (Precise text, please.) -
Please help me. I have an Ipod Shuffle and Ipod Nano both the latest versions. I can not get them to communicate with my ITunes. I have tried the troubleshooting and I have tried completely taking all Apple software off my computer and reinstalling Itunes. I could really use someones help. My ITunes keeps telling me reinstall Itunes to correct a software problem, but I have reinstalled it three times and the issue has not been corrected.
Thanks a bunch in advanced!I cannot find "Other" devices. I found Apple Mobile Device under Universal Bus Controllers but cannot see "recovery mode" or any other status. I use Windows Vista.
When I try to restart Apple Mobile Device Service I get the following message: "The Apple Mobile Device Service on Local Computer started then stopped. Some services stop automatically if they are not in use by other services or programs". What does this mean?
During the last 48 hours I was able to see my iPad in iTunes only one time during many attemnpts to connect . I haven't been able to see it during the llast several attempts.
Any suggestions? The standard suggestions have not worked: i.e. stop then start AMDS; tuurn off iPad and PC, then restart both and reconfrom iPad to PC; reload iTunes.
Maybe you are looking for
-
I can't shut down my computer because it says mail is open. It says to close mail and continue shut down. Problem is I can't open or close mail now. Can't shut down my computer at all. What can I do?
-
ITunes 7.3 update fixes fuzzy coverflow scroll bar!
Good news, it seems the latest update has fixed the unsightly fuzzy/blurry/pixellated scroll bar! Before you had to resize the iTunes window to get it to return to its sleek smooth appearance but since installing the update this morning my Coverflow
-
Ive got some footage shot from my Canon T2i (1080p @ 30fps) that ive edited the levels in to adjust the color. When I go to export it in Apple Pro Res 422 it works fine, the only problem is the file is MASSIVE. Ive got a 9 second clip that renders ou
-
"Others Tab" disabled in Expression Builder
I am tryng to create a very simple mapping with one source (Table) an Expresion Operator and a Target table. The problem I am facing is that the "Others Tab (Dropdown)" is coming as disabled in the Expression Builder. If any one can help me on this t
-
Develop Settings and DNG files...where is the info stored?
I just converted my Nikon NEF files to DNG. Previously I saved all changes I would make to my photos in the XMP sidecar files. I'm confused how things are working now because I thought those same changes would be saved to the DNG file. Now that I use