Reinstalling iTunes from scratch
An iTunes installation on a Windows 8.1 64bit PC got corrupted.
I am unable to completely remove the installed components to perform a fresh installation.
The most critical components looks to be the Mobile Device Support service, that remains confngured (in "Services") even after removing all the components.
When reinstalling iTunes the \mobile... directory is not created at all.
How can I completely remove the Mobile Device Support service in order to reinstall it?
Regards
marius
For general advice see Troubleshooting issues with iTunes for Windows updates.
The steps in the second box are a guide to removing everything related to iTunes and then rebuilding it which is often a good starting point unless the symptoms indicate a more specific approach. Review the other boxes and the list of support documents further down page in case one of them applies.
Your library should be unaffected by these steps but there is backup and recovery advice elsewhere in the user tip.
If Apple Mobile Device Support doesn't install this time around the section Install missing components will let you install just the missing AMDS instead of tearing everything down again.
tt2
Similar Messages
-
I am unable to download updates directly to iPad 2 , now trying to reinstall one from scratch but download keeps stopping and the restarting. Can you offer any advice, this happening when trying to download to laptop in itunes as well. Have tried to download on different broadband lines without success. Is this an apple problem due to high demand or something else?
Everything has worked well until about a month ago, up to date iOS 5 and itunes installed. Tried resetting numerous times, turned off all apps still no joy. Ipad was great but now feeling buying one was mistake. Also recent music purchase was useless and tunes would not play correctly.Since this is happening on the iPad and the computer, it might be worth a try to reboot your router - unplug it from power for about 30 seconds and then plug it in again.
Quit iTunes on the PC, reboot it and the iPad as well
Reboot the iPad by holding down on the sleep and home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider - let go of the buttons -
No choice, need to reinstall OS from scratch, but... Help!
I've been dealing with a disk error that has tripped up every application I've used to correct it. Disk First Aid could nothing. I tried Disk Warrior, but that's taking centuries to run and still won't solve the end problem (according to a DW techie). But before running DW I tried to use Retrospect, but that application won't function either, presumably because of the original disk error. All of this because I can't upgrade to Tiger and because I've been told that though there are no issues now the disk error will eventuallly get me. I don't know what the disk error is but it clearly is causing problems up and down the chain.
Anyway, so I am forced to reinstall Tiger from scratch thus entirely erasing and reformatting my hard drive (which I've been told will solve the problem). But without a Retrospect back up all I can do is drag'n'drop from an external hard drive back onto the Powerbook. But though I've backed up most everything manually I'm sure I'm missing things, plus there's all those settings and preferences (and where is my Safari bookmarks file?).
So, should I do this and go through the pain? Should I take it into a professional and have them do a more thorough backup and reinstall and reset? Should I buy a new Powerbook and just have it copy over everything onto a freshly formatted Tiger machine and sell my old one with a fresh install and reformat on Ebay (no)? Or just stay with Panther until I buy a new one later and live with the risk of an eventual hard drive meltdown?
What to do, what to do??? Thanks.
Also, with Restrospect, what happens with a restore if I've reinstalled a new OS since the backup? Does it do anything with the OS or not?Your Safari Bookmarks.html file is in the folder ~/Library/Safari.
Good luck.
Tuttle -
I have many thousands of songs in my itunes library. Unfortunately, most are now pointing toward .jpgs instead of the m4a files in my itunes library. Is there anyway to fix this without reimporting all the files into itunes from scratch?
OMG...I'm glad to know I'm not the only one. Since my computer is a goner, I don't have any other way to access all that music.
-
Using windows 8 - receive message "ipod detected but cannot be identified properly" when connecting ipod nano 7th gen. Have unisntalled and reinstalled itunes from apple site as advised with no luck. Has anyone else had this problem and resolved it please?
This is how it's displayed: http://i50.tinypic.com/nd7vk7.jpg
And this is what happens when I click properties and 'search for solutions': http://i47.tinypic.com/2iu3vrc.jpg (the box disappears after that, apparently having done nothing, when I search online for software it informs me my computer already has the best/latest installed)
I use a Toshiba Satelite L350-170, my Vista is a 32-bit Thankyou!
Message was edited by: Martha11 -
Help please...
My computer's hard drive died and was replaced. So I go to reinstall iTunes and it creates a whole new setup. I have all my music still on my iPod nano. Can someone please point me to a paper or instructions on how to recreate my iTunes to match the iPod nano?
Thanks in advance.You'll find information on manually moving music from your iPod and also some third party utilities in this article: http://playlistmag.com/help/2005/01/2waystreet/
-
Need to reinstall iTunes from the Canadian Website
I just purchased a new iPad from the USA and followed the instructions to install iTunes but from the US site. Now I tried to use my canadian credit card to buy apps and it won't let me, only US CCs will be accepted. Can I reinstall iTunes?
As you've found out, since you've got a Canadian credit card you need to be in Canada and use the Canadian iTunes store.
iTunes itself is global, it's the country that you've got selected on the bottom of the store page that is the problem - click on the USA flag at the bottom and then chose Canada instead. -
Need help to get itunes running on my PC so that I can back up my iphone.
Go to Control Panel > Add or Remove Programs (Win XP) or Programs and Features (later)
Remove all of these items in the following order:
iTunes
Apple Software Update
Apple Mobile Device Support (if this won't uninstall move on to the next item)
Bonjour
Apple Application Support
Reboot, download iTunes, then reinstall, either using an account with administrative rights, or right-clicking the downloaded installer and selecting Run as Administrator.
The uninstall and reinstall process will preserve your iTunes library and settings, but ideally you would back up the library and your other important personal documents and data on a regular basis. See this user tip for a suggested technique.
Please note:
Some users may need to follow all the steps in whichever of the following support documents applies to their system. These include some additional manual file and folder deletions not mentioned above.
HT1925: Removing and Reinstalling iTunes for Windows XP
HT1923: Removing and reinstalling iTunes for Windows Vista, Windows 7, or Windows 8
tt2 -
I need help with moving my music library.
I recently upgraded the OS on my computer from Vista to Windows7.
During the process it copied my iTunes library to a folder on this same computer (marked it Windows.old)
Once the OS was done, I installed a new copy of iTunes on the Windows7 but it now has a blank library (folder)
How do I move my music from its current folder location (on this same computer) into the new iTunes library folder ???
There don't seem to be specific instructions on how to do this.Skydiver119 wrote:
My situation may be different from yours since all mu music is ripped from cd's not bought from iTunes, but I would think the premise is the same.
Doesn't matter what is in your library.
When I moved computers I literally dragged and dropped the music where I wanted it to be. THen when I opened iTunes I imported the files back into iTUnes
This creates a new library with all the same items but you lose a lot of info: Ratings, comments, date added, custom EQ, playlists, etc.
If you simply copy the entire /Music/iTunes/ folder, it is the exact same library, not a new library. No info is lost. -
I had power hits that cycled my computer a few times. I had to do a recovery from a week ago. Firefox will no longer start. A crash report pop-up shows an error and cannot send a report. I'm assuming the program will have to be reinstalled. Will I loose all previous bookmarks. Doing a windows search for bookmarks only shows about 1/3 of saved bookmarks. Are they gone too.
I gambled, and all bookmarks returned.
-
Brand new imac 27" keeps crashing. I'm running 10.9.2 with all software up to date. It will crash on file tranfers to/from/between external drives, web browsing, word processing, video editing, and even while idling. It used to crash every 15 minutes when I first got it but I reformatted and reinstalled all software. Now it it still crashing albeit less often. This is extremely frustrating because I have no idea what I can do to prevent it from happening!
Any ideas/help would be greatly appreciated.Hmm thanks for the input. Alright. I uninstalled Avast. Was good for an hour or so. I was doing some file browsing and crashed again. Got this message.
Anonymous UUID:
E3F1F825-B183-F89A-2DD4-2B2D80C38E2A
Wed Mar 19 22:17:53 2014
panic(cpu 0 caller 0xffffff8010edbe2e): Kernel trap at 0xffffff8010e340d5, type 14=page fault, registers:
CR0: 0x000000008001003b, CR2: 0x0000000000000008, CR3: 0x0000000013b1b000, CR4: 0x00000000001606e0
RAX: 0x0000000000000000, RBX: 0xffffff80114d2ab8, RCX: 0xffffff804e99d7a4, RDX: 0xffffff80114ca830
RSP: 0xffffff838ecb7d90, RBP: 0xffffff838ecb7dc0, RSI: 0xffffff80114cafb0, RDI: 0x000000000000002e
R8: 0x0000000000000000, R9: 0x00000000009895b4, R10: 0xffffff83a0570000, R11: 0x0000000000000000
R12: 0x0000000000000005, R13: 0x0000000000000001, R14: 0xffffff80529d6b20, R15: 0xffffff80114ca4e8
RFL: 0x0000000000010083, RIP: 0xffffff8010e340d5, CS: 0x0000000000000008, SS: 0x0000000000000010
Fault CR2: 0x0000000000000008, Error code: 0x0000000000000002, Fault CPU: 0x0
Backtrace (CPU 0), Frame : Return Address
0xffffff838ecb7a20 : 0xffffff8010e22fa9
0xffffff838ecb7aa0 : 0xffffff8010edbe2e
0xffffff838ecb7c70 : 0xffffff8010ef3326
0xffffff838ecb7c90 : 0xffffff8010e340d5
0xffffff838ecb7dc0 : 0xffffff8010e337d5
0xffffff838ecb7e10 : 0xffffff8010e336ab
0xffffff838ecb7e40 : 0xffffff8010e4c160
0xffffff838ecb7f10 : 0xffffff8010ecf359
0xffffff838ecb7f50 : 0xffffff8010ee1ea6
0xffffff838ecb7f80 : 0xffffff8010edb3ef
0xffffff838ecb7fd0 : 0xffffff8010ef34e9
0xffffff83a0573f50 : 0xffffff8010e375ba
0xffffff83a0573f90 : 0xffffff8010e37908
0xffffff83a0573fb0 : 0xffffff8010ed6ff7
BSD process name corresponding to current thread: kernel_task
Mac OS version:
13C64
Kernel version:
Darwin Kernel Version 13.1.0: Thu Jan 16 19:40:37 PST 2014; root:xnu-2422.90.20~2/RELEASE_X86_64
Kernel UUID: 9FEA8EDC-B629-3ED2-A1A3-6521A1885953
Kernel slide:
0x0000000010c00000
Kernel text base: 0xffffff8010e00000
System model name: iMac14,2 (Mac-27ADBB7B4CEE8E61)
System uptime in nanoseconds: 7766525033947
last loaded kext at 4622165777838: com.blackmagic-design.desktopvideo.iokit.framebufferdriver
9.9. (addr 0xffffff7f93478000, size 20480)
last unloaded kext at 4682598356442: com.apple.driver.AppleIntelMCEReporter
104 (addr 0xffffff7f93470000, size 32768)
loaded kexts:
com.nvidia.CUDA
1.1.0
com.apple.filesystems.autofs
3.0
com.apple.driver.AppleHWSensor
1.9.5d0
com.apple.iokit.IOBluetoothSerialManager
4.2.3f10
com.apple.driver.AudioAUUC
1.60
com.apple.driver.AppleMikeyHIDDriver
124
com.apple.driver.AGPM
100.14.15
com.apple.driver.ApplePlatformEnabler
2.0.9d1
com.apple.driver.X86PlatformShim
1.0.0
com.apple.iokit.IOUserEthernet
1.0.0d1
com.apple.driver.AppleHDA
2.6.0f1
com.apple.driver.AppleMikeyDriver
2.6.0f1
com.apple.driver.AppleIntelHD5000Graphics
8.2.4
com.apple.Dont_Steal_Mac_OS_X
7.0.0
com.apple.driver.AppleUpstreamUserClient
3.5.13
com.apple.driver.AppleBacklight
170.3.5
com.apple.driver.AppleHWAccess
1
com.apple.iokit.BroadcomBluetoothHostControllerUSBTransport
4.2.3f10
com.apple.driver.AppleMCCSControl
1.1.12
com.apple.driver.AppleThunderboltIP
1.1.2
com.apple.driver.AppleLPC
1.7.0
com.apple.driver.AppleIntelFramebufferAzul
8.2.4
com.apple.GeForce
8.2.4
com.apple.driver.AppleSMCLMU
2.0.4d1
com.apple.driver.Oxford_Semi
3.4.1
com.apple.AppleFSCompression.AppleFSCompressionTypeDataless
1.0.0d1
com.apple.AppleFSCompression.AppleFSCompressionTypeZlib
1.0.0d1
com.apple.BootCache
35
com.apple.driver.AppleUSBHub
666.4.0
com.apple.driver.XsanFilter
404
com.apple.iokit.IOAHCIBlockStorage
2.5.1
com.apple.driver.AppleFWOHCI
4.9.9
com.apple.driver.AirPort.Brcm4360
831.21.63
com.apple.driver.AppleSDXC
1.5.2
com.apple.iokit.AppleBCM5701Ethernet
3.8.1b2
com.apple.driver.AppleAHCIPort
3.0.0
com.apple.driver.AppleUSBXHCI
670.4.0
com.apple.driver.AppleRTC
2.0
com.apple.driver.AppleACPIButtons
2.0
com.apple.driver.AppleHPET
1.8
com.apple.driver.AppleSMBIOS
2.1
com.apple.driver.AppleACPIEC
2.0
com.apple.driver.AppleAPIC
1.7
com.apple.nke.applicationfirewall
153
com.apple.security.quarantine
3
com.apple.kext.triggers
1.0
com.apple.iokit.IOSerialFamily
10.0.7
com.apple.driver.DspFuncLib
2.6.0f1
com.apple.vecLib.kext
1.0.0
com.apple.iokit.IOAudioFamily
1.9.5fc2
com.apple.kext.OSvKernDSPLib
1.14
com.apple.iokit.IOBluetoothFamily
4.2.3f10
com.apple.iokit.IOSurface
91
com.apple.driver.AppleBacklightExpert
1.0.4
com.apple.iokit.IOFireWireIP
2.2.6
com.apple.iokit.IOBluetoothHostControllerUSBTransport
4.2.3f10
com.apple.driver.AppleSMBusController
1.0.11d1
com.apple.driver.X86PlatformPlugin
1.0.0
com.apple.driver.AppleThunderboltEDMSink
2.1.3
com.apple.driver.AppleHDAController
2.6.0f1
com.apple.iokit.IOHDAFamily
2.6.0f1
com.apple.driver.IOPlatformPluginFamily
5.7.0d10
com.apple.driver.AppleSMBusPCI
1.0.12d1
com.apple.AppleGraphicsDeviceControl
3.4.35
com.apple.iokit.IOAcceleratorFamily2
98.14
com.apple.iokit.IOAcceleratorFamily
98.14
com.apple.driver.AppleSMC
3.1.8
com.apple.nvidia.driver.NVDAGK100Hal
8.2.4
com.apple.nvidia.driver.NVDAResman
8.2.4
com.apple.iokit.IONDRVSupport
2.4.1
com.apple.iokit.IOGraphicsFamily
2.4.1
com.apple.iokit.IOUSBHIDDriver
660.4.0
com.apple.iokit.IOUSBMassStorageClass
3.6.0
com.apple.driver.AppleUSBMergeNub
650.4.0
com.apple.driver.AppleUSBComposite
656.4.1
com.apple.iokit.IOFireWireSerialBusProtocolTransport
2.5.1
com.apple.iokit.IOFireWireSBP2
4.2.6
com.apple.driver.AppleThunderboltDPOutAdapter
3.1.7
com.apple.driver.AppleThunderboltDPInAdapter
3.1.7
com.apple.driver.AppleThunderboltDPAdapterFamily
3.1.7
com.apple.driver.AppleThunderboltPCIUpAdapter
1.4.5
com.apple.driver.AppleThunderboltPCIDownAdapter
1.4.5
com.apple.iokit.IOUSBUserClient
660.4.2
com.apple.iokit.IOSCSIBlockCommandsDevice
3.6.6
com.apple.iokit.IOSCSIArchitectureModelFamily
3.6.6
com.apple.iokit.IOFireWireFamily
4.5.5
com.apple.driver.AppleThunderboltNHI
2.0.1
com.apple.iokit.IOThunderboltFamily
3.2.7
com.apple.iokit.IO80211Family
630.35
com.apple.iokit.IOEthernetAVBController
1.0.3b4
com.apple.driver.mDNSOffloadUserClient
1.0.1b5
com.apple.iokit.IONetworkingFamily
3.2
com.apple.iokit.IOAHCIFamily
2.6.5
com.apple.iokit.IOUSBFamily
675.4.0
com.apple.driver.AppleEFINVRAM
2.0
com.apple.driver.AppleEFIRuntime
2.0
com.apple.iokit.IOHIDFamily
2.0.0
com.apple.iokit.IOSMBusFamily
1.1
com.apple.security.sandbox
278.11
com.apple.kext.AppleMatch
1.0.0d1
com.apple.security.TMSafetyNet
7
com.apple.driver.AppleKeyStore
2
com.apple.driver.DiskImages
371.1
com.apple.iokit.IOStorageFamily
1.9
com.apple.iokit.IOReportFamily
23
com.apple.driver.AppleFDEKeyStore
28.30
com.apple.driver.AppleACPIPlatform
2.0
com.apple.iokit.IOPCIFamily
2.9
com.apple.iokit.IOACPIFamily
1.4
com.apple.kec.corecrypto
1.0
com.apple.kec.pthread
1
Model: iMac14,2, BootROM IM142.0118.B00, 4 processors, Intel Core i7, 3.5 GHz, 32 GB, SMC 2.15f2
Graphics: NVIDIA GeForce GTX 780M, NVIDIA GeForce GTX 780M, PCIe, 4096 MB
Memory Module: BANK 0/DIMM0, 8 GB, DDR3, 1600 MHz, 0x02FE, 0x45424A3831554738454655352D474E4C2D46
Memory Module: BANK 1/DIMM0, 8 GB, DDR3, 1600 MHz, 0x02FE, 0x45424A3831554738454655352D474E4C2D46
Memory Module: BANK 0/DIMM1, 8 GB, DDR3, 1600 MHz, 0x02FE, 0x45424A3831554738454655352D474E4C2D46
Memory Module: BANK 1/DIMM1, 8 GB, DDR3, 1600 MHz, 0x02FE, 0x45424A3831554738454655352D474E4C2D46
AirPort: spairport_wireless_card_type_airport_extreme (0x14E4, 0x111), Broadcom BCM43xx 1.0 (6.30.223.154.63)
Bluetooth: Version 4.2.3f10 13477, 3 services, 23 devices, 1 incoming serial ports
Network Service: Ethernet, Ethernet, en0
Network Service: Wi-Fi, AirPort, en1
PCI Card: pci11c1,5901, IEEE 1394 Open HCI, Thunderbolt@195,0,0
Serial ATA Device: APPLE HDD ST1000DM003, 1 TB
USB Device: USB3.0 Hub
USB Device: USB3.0 Hub
USB Device: FreeAgent GoFlex
USB Device: FreeAgent GoFlex
USB Device: BRCM20702 Hub
USB Device: Bluetooth USB Host Controller
USB Device: FaceTime HD Camera (Built-in)
USB Device: USB2.0 Hub
USB Device: EPSON Artisan 730 Series
USB Device: USB2.0 Hub
USB Device: Microsoft Basic Optical Mouse v2.0
USB Device: Wired Keyboard 600
FireWire Device: eGo HDD, Iomega, Up to 800 Mb/sec
Thunderbolt Bus: iMac, Apple Inc., 23.10
Thunderbolt Device: Thunderbolt to FireWire Adapter, Apple Inc., 1, 5.6 -
As a result of downloading an Itunes update on my PC I got a runtime error (R6034). I now cannot access my Itunes Library. If I uninstall Itunes and then reinstall the latest version do I loose the songs in my library, which I paid for?
ThanksHi there norad73,
I would recommend taking a look at the troubleshooting steps found in the article below.
iTunes 11.1.4 for Windows: Unable to install or open
http://support.apple.com/kb/TS5376
-Griff W. -
How to reinstall Aperture from scratch
Hello everyone,
Could you please tell me how to re-install Aperture from the begining e.g. I have to put the SN again?
The problem is the program does not recognize my SN after the updates and I have no idea why. I bought this program through academic version.
Thank you very much,
JamesJames, if you need to reinstall the program, you are going to have to remove all Aperture related programs, folders and files, including plists and anything else that has Aperture in it. A file that the install program looks for is still on the system, and when the installation sees it, it goes into upgrade mode. Once you get rid of these files, the installation should work like a new install.
Do a search on all Aperture names files and see what you come up with. This should be pretty straight forward. This isn't Windows where things get written all over the disk, including the registry, and is almost impossible to remove.
Jeff Weinberg -
Can't reinstall iTunes from time machine help?
Hi I have recently upgraded to Lion and want to get my itunes stored on time machine to the pc any ansewrs ?
wrongusername wrote:
But if I transfer everything with the Setup Assistant, won't I once again be experiencing the problems I had?
If the problems were caused by your data. But that's extremely unlikely. It may have been an app, or, much more likely from your description, something corrupted in the Leopard OS. That's one of the problems with upgrading a sick system without knowing what or where the causes are. It's a bit like a brain surgeon operating on himself: if he isn't in tip-top shape to start with, his condition is likely to change, and not for the better.
Most of us would have recommended first simply doing a +*Repair Disk+* on your internal HD; if that didn't help, installing the "combo" Leopard update; if that didn't work, doing an +Archive and Install+ and re-installing the "combo."
After a clean re-install of Snow Leopard, my Mac worked fine again (except for the TM trouble). So it probably had something to do with my old files.
Probably not. Much more likely OSX was somehow damaged. And you got a whole new one.
How come I could read the files on my external HD and yet not be able to copy the files?
Time Machine uses special "deny everybody everything" permissions on it's backups, among other things, in an attempt to keep us mere mortals from moving, changing, or deleting things and corrupting them. -
Mac Os X Mountain Lion - Firefox 19
As Firefox refused to start (crash during opening, crash reporter poppinng up) I tested:
- safe mode
- removing everything on ~/Library related to firefox
- try a full firefox reinstall
Nothing helpedYou can do a check for corrupted and duplicate fonts and other font issues:
*http://www.thexlab.com/faqs/multipleappsquit.html - Font Book 2.0 Help: Checking for damaged fonts
*http://www.creativetechs.com/iq/garbled_fonts_troubleshooting_guide.html
If you have submitted crash reports then please post the IDs of one or more crash reports that have this format:
*bp-xxxxxxxx-xxxx-xxxx-xxxx-xxxxxxxxxxxx
You can find the IDs of the submitted crash reports on the <i>about:crashes</i> page.
*You can open the <b>about:crashes</b> page via the location bar, like you open a website.
If you can't open Firefox then see:
*http://kb.mozillazine.org/Mozilla_Crash_Reporter#Location_of_crash_reports
*http://kb.mozillazine.org/Mozilla_Crash_Reporter#Viewing_crash_reports
Maybe you are looking for
-
Hello - We ran the Sales Analysis Report for Items on SAP B1. It doesn't seem right...the # of items sold is clearly wrong -- it looks like it may be off by over 10X. Does anyone know what we may have done wrong here? Did we not set something up c
-
Problem with 'CONVERT_OTF'
Hi, We send email confi to the customer along with a PDF attachment that contains the information regarding the material, quantity, price etc. In the program I used CONVERT_OTF to convert OTF format to PDF and sending the mail using 'SO_DOCUMENT_SEND
-
Where to buy stacked HDD brackets.
I'm adding more internal hard drives to my old computer and hopefully eliminating any need of an external drive for backup, etc. I already have one stacked two-drive bracket for master-slave connection in use, but am getting an ATA controller to add
-
Branch Distribution Point 'Install Pending'
I'm having a tough time getting a package to copy to a BDP (our first one). I think I'm following all the correct steps (adding the remote server as a SCCM Site System as a branch distribution point / adding the new BDP to the package / specify that
-
E-mail sending background job diappeared in the system
Hello Gurus, We have one e-mail sending job in our production system. The frequency of the job is daily. Now we are not able to find the sheduled/Released/Active/Finished/Canceled status for this from the last 2 days. Please help me to get back the j