Reinstalling itunes help ASAP
While trying to update iTunes on my laptop, I'm being hit with an error that reads
"An error occurred during the installation of assembly 'Microsoft.VC80.CRT,version="8.0.50727.4053",type="win32,publicKeyToken="1fc8b3 b9a1e18e3b",processorArchitecture="x86". Please refer to Help and Support for more information. HRESULT: 0x800736b
I've constantly tried to troubleshoot it and it's still not working I even uninstalled my previous iTunes and now I'm left with no iTunes at all please help ASAP
It's a broken Windows Modules Installer then.
We've had some success with that one using the SCENARIO III treatment from the following document:
[Vista - Windows Update Error 80070424|http://www.vistax64.com/tutorials/258701-windows-update-error-80070424 -a.html]
I'd *strongly suggest* setting up a System Restore Point prior to doing that, though.
After doing the fix, stok up on Windows Updates. (The iTunes installation trouble is sometimes the first indication for folks of an issue that may have been going on for months, and with a broken Windows Modules Installer no Windows Updates will have been installing.)
(You may have to do your updates in several batches ... if your SP2 didn't install due to the Updates trouble, there's a bunch of updates that you won't see unless you get SP2 installed. So after installing updates, keep checking for Updates until you don't see any new ones showing for you.)
After you're stocked back up in that regard, try another iTunes install. Does it go through properly this time?
Similar Messages
-
I have an iPad 2 and it is in "Recovery Mode" and wants to be connected to iTunes to be restored. When I go to restore it in iTunes it says, "The ipad software update server could not be contacted." I have tried restarting my computer and checked that I am connected to WiFi Please help me ASAP.
Hi there Jake61601,
I would recommend taking a look at the troubleshooting steps found in the article below.
iTunes for Windows: iTunes can't contact the iPhone, iPad, or iPod software update server
http://support.apple.com/kb/ts1814
-Griff W. -
Can anyone help with this. Lost count of how many times i have uninstalled itunes
Perhaps try the "Error -609" section in the Specific Conditions and Alert Messages: (Mac OS X / Windows) section of the following document:
iTunes: Advanced iTunes Store troubleshooting -
both my iphone or ipod is not detected by itunes unless itunes is updated/reinstalled. however whenever i restart my computer it seems itunes uninstalls itself or something and in order to detect my phone it needs to be reinstalled all over again. why is itunes uninstalling itself on my mac when it is restarted?
snow leopard.
Okay. In that case try the following document:
Mac OS X v10.6: iOS device not recognized in iTunes after restart -
R5034 Runtime error when updating ITunes help - deleted all iTunes/Apple programs and reinstalled ITunes
help please ?solved problems and reinstalled - 4 hours wasted trying to fix iTunes ...
Apple could do better to inform users when updating and upgrading ..... -
Since reinstalling itunes i can no longer sync. Error message says already synced with another itunes library. I get a blank sync - no songs, photos ect as it comes up with this error whenever try to select what is to be synced. Help - lost everything. Complete nightmare - Apple sort a fix NOW, but will take any help
Plawexki wrote:
... do you know if the contacts, photos, messages etc will be wiped?
Yes... Everything will be Wiped and Replaced with what is currently on Your Mac.
SYNCING with iTunes
See here > http://support.apple.com/kb/HT1386
From Here > http://www.apple.com/support/iphone/syncing/
You may find this information of interest...
Have a read here...
https://discussions.apple.com/message/18409815?ac_cid=ha
And See Here...
How to Use Multiple iDevices with One Computer -
I recently tried to update iTunes to 11.1, and am now getting an error message "This application has failed to start because MSVCR80.dll was not found. Reinstalling the application may fix this problem." I have uninstalled and reinstalled iTunes several times with no success. I am running Windows XP Svc Pack 3. Help please.
Click here and follow the instructions. You may need to completely remove and reinstall iTunes and all related components, or run the process multiple times; this won't normally affect its library, but that should be backed up anyway.
(99753) -
Since I installed ios 6.1 in my iPhone 4, I can't sync it with iTunes. Can annyone help me? I have already reinstalled iTunes and reseted the iPhone, but it still doesn't sync. Thank you.
Hello Sean,
It sounds like you are constantly needing to restore your phone because it keeps going into recovery mode. Usually putting a device into recovery mode and restoring it can help isolate an issue to your iPhone hardware if an issue persists afterwards. I would try manually putting it into recovery mode and restoring it 1 more time:
If you can't update or restore your iOS device
http://support.apple.com/kb/HT1808
If that does not resolve it the symptoms indicate to me that it is a hardware issue causing this to happen and would seek service for it:
iPhone Repair - Other Repairs
https://www.apple.com/support/iphone/repair/other/
Thank you for using Apple Support Communities.
All the best,
Sterling -
I can not open itunes on my computer. It started when an upgrade appeared. Now I get a message that states This application has failed to start because MSVCR80.dll was not found. Re-installing the application may fix this problem. I tried to reinsall the application but it did not help. I also get a message iTunes was not installed correctly. Please reinstall iTunes Error 7 (Windows error 126) Please Help me!
Click here and follow the instructions. You may need to completely remove and reinstall iTunes and all related components, or run the process multiple times; this won't normally affect its library, but that should be backed up anyway.
(99623) -
Title pretty much sums it up. I'm getting very frustrated. I've tried turning off the compatability of my Quicktime, and nothing is changed. Can anyone figure out the problem? I can't find an answer anywhere.
Yea i got that same message to Quicktime failed to initialize (error-2096) Quicktime is required to run itunes.Please reinstall itunes, which i did so many times which did'nt work and so i started reading some of the articles on this site. there was one article i read which says right click on quicktimeplayer and click on properties then click compatibilty tab and deselect checkbox or boxes but i only deseleted one box which reads windows vista .windows 2000 or 95 or whatever so i did that opened up itunes again and still i got the same error message then i started thinkin i wonder if i should do the same thing on the itunes player click on properties, click compatibilty tab then deselect box so i did. Open up itunes hey hey presto it open up alrighty only problem i lost all my music but lucklie at backed them up on another hardrive, on my ipod & Cds...Hopefully this will help you out or anyone else...
-
I have just purchased an iPhone 4, but it wasn't connecting to my iTunes, so I took advice and uninstalled iTunes. But when I am trying to reinstall iTunes, it keeps telling me that I cannot because I have a newer version of Quicktime installed. I cannot find this newer version anywhere, and have gotten rid of the Quicktime folder, but it is still refusing to install iTunes.
Please help, I have tried everything.But when I am trying to reinstall iTunes, it keeps telling me that I cannot because I have a newer version of Quicktime installed.
That's usually caused by damaged QuickTime installation configuration information on the PC.
Unfortunately, this sort of trouble has gotten more complicated to deal with ever since Microsoft pulled the Windows Installer CleanUp utility from their Download Center on June 25. First we have to find a copy of the utility.
Let's try Googling. (Best not to use Bing, I think.) Look for a working download site for at least version 3.0 of the Windows Installer CleanUp utility. After downloading the utility installer file (msicuu2.exe), scan the file for malware, just in case. (I use the free version of Malwarebytes AntiMalware to do single-file scans for that.)
If the file is clean, to install the utility, doubleclick the msicuu2.exe file you've downloaded.
Now run the utility ("Start > All Programs > Windows Install Clean Up"). In the list of programs that appears in CleanUp, select any QuickTime entries and click "Remove".
Quit out of CleanUp, restart the PC and try installing iTunes again. Does the install go through properly now?
(If you do find a clean download site for the correct version of CleanUp, please don't tell me where it is. Without wishing to sound paranoid (although I grant it does sound paranoid), there is a non-zero chance that posting links to download locations for the utility here at Discussions leads to that download location being shut down.) -
Error Message and Itunes won't open. NEED HELP ASAP PLEASE
I tried to get into my iTunes from my desktop short cut and the error message saying "Problem with Shortcut" then saying "This action is only valid for products that are currently installed." ***??? Anyway I tried to download a new version of iTunes then it said it could no remove old files. SO, I tried to remove iTunes by add/remove programs and it won't let me.>> NEED HELP I LEAVE TOMORROW FOR TRAINING AND I NEED SOME MUSIC AND UPDATE ON MY IPOD>>>>
Welcome to AD!
Download, install, and run this tool from Microsoft. Use it to fix the iTunes and QuickTime programs, as well as Apple Software Updater.
http://support.microsoft.com/kb/290301
Then reinstall iTunes.
If you need step-by-step directions, they are in the *General installation troubleshooting* section of this Apple article. Click on each line to expand the instructions.
http://support.apple.com/kb/HT1926
The Microsoft installer cleanup tool is listed in the third step, "Clean up iTunes installer files on the computer". -
When I try and start iTunes after trying to intall the 11.4 update on my Windows 7 laptop, it says to reinstall iTunes and "Windows Error Code 193" I tried ave the same failed response. Can someone help?
Hi inharmony35,
If you are having issues with iTunes after an attempted update, you may want to try the steps in the following articles:
Apple Support: Removing and reinstalling iTunes and other software components for Windows Vista, Windows 7, or Windows 8
http://support.apple.com/kb/HT1923
Apple Support: Issues installing iTunes or QuickTime for Windows
http://support.apple.com/kb/HT1926
Regards,
- Brenden -
My phone is not showing up in itunes. I want to sync it. I have a MAC and I have restarted the phone, it's charged, I have the most current version of itunes. What do I do now? It says to reinstall itunes if you have windows but not for mac. Help!
With your phone plugged in, open Image Capture and see if the iPhone shows up. If not, you are having a sync problem. If it shows up in Image Capture, but not iTunes, I'd delete iTunes and reinstall it.
-
I had to reinstall itunes and now I get an error message when i try to open it please help
i had to reinstall itunes and now I get an error message when i try to open it please help
Please make sure to post the error message here, then we can help you decypher it.
You may want to make sure you're installing the right version of itunes. If you have a 64bit system, you will need to make sure to download and install the 64bit version of iTunes.
http://support.apple.com/kb/DL1427
Maybe you are looking for
-
Looking for a Programmer to Create A YouTube "Embed" Plug In
Hello everyone, I am Looking for a Programmer to Create An Acrobat Pro "Embed" Plug In based on the free YouTube API. The purpose of this is to be able to easily embed YouTube Video's within Acrobat documents so that It can stream the content into th
-
Authentication mechanism - PAPI-WS-Instance Creation
Hi, I am trying to create instance using papi-ws. Each instance is created for each webservice call from one system. so i dont have any specific user login to connect for login. Otherwise we use single sign on. Could anyone help me out how to proceed
-
On startup, FF loads 2 tabs - one is my default, the other a FF info window.
I turn on my desktop and click my Firefox (FF) icon. When FF loads to the screen, two tabs appear. - one with some FF page that includes a FF video it says something like "Hurray: your browser is up to date." - the other is my default page The result
-
Emptying trash - Says "in Use"
I'm trying to get rid of Old BlackBerry App and Palm App. The BB sync Icon is at the top of screen and I don't have BB anymore. I put both the applications in the trash but when I try and empty it says they are in use. How can I get rid of? Thanks!
-
I have an 80 GB classic. I've had it for about eight months, and before that I had a 60 GB video for 3 years. My iPod is used in my daily routine (going to work, at my desk at work, going home, 5 days a week, so obviously I try to take care of it. I