Reinstalling Mac OS X after had deleted it with Boot Camp...

my problem is that i tried to install windows on my new imac, but I formated the wrong the wrong part of my hard drive. Now, i'm trying to reinstall OS X but I cant't find any disq in the ''select an destination'' step.
help me please
dube

Nope, no image involved. The untitled one is the one you need to erase and yes it'll erase any windows thingy, since that was screwed up, as per your original post. See http://docs.info.apple.com/article.html?artnum=61802 and the links it points to, especially http://docs.info.apple.com/article.html?artnum=301408

Similar Messages

  • Time in my mac changes after switching to Windows with Boot camp

    Hi there..
    I don't know whether this is normal, but every time I switch from Windows back to Mac OS (Using Boot camp-all versions I've tried have this flaw, it hasn't appeared in case of Parallels), system time changes in one hour ahead. Can anybody explain this to me, is it something that can't change or just a flaw in Boot camp, waiting to be corrected? What should I do to prevent it from doing so again?
    Thanx everyone

    ok.. though you might've answered my question, is there any solution to this issue? Though I don't know what dst flag in windows is, I noticed that my time zone is in both cases set to gmt+1, which could possibly cause the switching in one hour ahead... but I wonder can I solve it not by setting the option to gmt 0? In that case the automatic correcting of my changed time via the internet would be in my opinion better than actually 'solving' it by setting my time in both OS' to gmt 0, which would mean that in wouldn' be corrected in a correct way via internet any more... so what do you think, is just letting it be the only solution i can consider?

  • I have a mac book pro with Boot Camp that also runs windows.  I upgraded to Lion and somehow it crashes the mac side peridoically.  I am told I need to "clean" it and reinstall lion using the recovery drive.  will that delete the windows partition too??

    I have a mac book pro with Boot Camp that also runs windows.  I upgraded to Lion and now the mac side crashes/freezes periodically, especially iphoto.  I am told by the genius' that I probably need to "clean" it and reinstall lion using the "recovery drive" which resets everything back to default and reinstalls the lion operating system.  My question is will this also delete the "windows" partition drive and all that data too.  If so that will be a huge pain in the ___ to back up and reinstall boot camp and windows. I want to shoot the lion.

    There is no system like Acronis for the Mac platform. You can try using the buiilt in Disk Utility to create an Image of the complete Mac drive but I have found that this does not work very well as on tryiing to restore it gives errors sometimes.
    You can use SuperDuper or Carbon Copy Cloner to create a bootable Clone of your system partition. But that is only for the System partition and not the complete drive.
    If you use Boot Camp to install Windows on your Mac neither of those two programs will clone the Windows side.
    Neither will Disk utility as Mac's can not create or write to a NTFS partition. So some other program is need for that.

  • I have recently purchased a hybred 750GbHDD as an upgrade for my MAC Book Pro (Intell Version) I have a boot camp partition to the original 500GB HDD. How can I expand both partitions to fit the new drive?

    I have recently purchased a hybred 750GbHDD as an upgrade for my MAC Book Pro (Intell Version) I have a boot camp partition to the original 500GB HDD. How can I expand both partitions to fit the new drive?
    I have tried bootcamp and have had no luck due to the fact that boot camp doesn't see the additional HDD space of 250Gb. What am I not doing?

    Ouch, well there is a problem.
    This is the stack of partitions on your old drive
    EFI (hidden)
    Lion (50GB say)
    Bootcamp (50GB say)
    Lion Recovery Partiton (hidden)
    This is the same stack on your new drive imaged from the old one.
    EFI (hidden)
    Lion (50GB say)
    Bootcamp (50GB say)
    Lion Recovery Partiton (hidden)
    Emtpy Space (100GB say)
    This is what you want
    EFI (hidden)
    Lion (100GB say)
    Bootcamp (100GB say)
    Lion Recovery Partiton (hidden)
    EFI has to be at the top of the drive and Lion Recovery has to be at the bottom of the drive.
    And you only have four partitions.
    You can't move the Lion Recovery Partition or Bootcamp partiton, however you can expand the Lion Partition into empty space below it. (but can't delete or move the Lion Recovery partition)
    Your Duplicator duplicated perfectly, too perfectly Likely would work with same sized drives/partitions.
    This is what your going to need to do.
    You need to move the Bootcamp partition to a blank external drive using WinClone and disconnect. This is so you have two backups of it. (one on your old 500GB drive)
    You will need a drive enclousre or IDE/SATA to USB adapter cable for the older 500GB drive and option key boot from it. (some enclosures can't be booted from so check first Other World Computing is good place to ask)
    Download the free Carbon Copy Cloner, grab any new files off the new 750GB internal drive to the old 500GB your booted from.
    Open Apple's Disk Utility and Erase with Zero option the entire internal 750GB drive and let it rip, this will map off as many bad sectors and improve reliability.
    Now use Carbon Copy Cloner to clone the 500GB Lion + Lion Recovery Partitions to the internal 750GB, it will "fix" things and place Lion Recovery at the bottom of the drive where it belongs, give all the extra space to OS X Lion.
    Next your going to have to follow WinClones instructions to restore your Bootcamp, likely you will have to recreate the Bootcamp partition first (in Bootcamp) to the size you want and then clone. Likely Winclone may "fix" Windows to recognize it's in a new larger partition now. I don't know you'll have to check as I haven't used it.
    When Bootcamp creates the partition it will place it near the bottom next to the Lion Recovery Partition.
    As you know you will have to re-validate Windows with Lord Redmond or it expires as you changed the hardware.

  • Need to Re-install Windows on Mac with boot camp

    I purchased a Mac Pro from someone about 6 months ago that already had a 2nd drive with Boot Camp and Windows XP Pro running on it. Today for the first time when I booted into Windows, I got an error message saying that I "may be a victim of software counterfiting" and that my version of Windows is not an authorized version in my region.
    I have an a genuine Windows XP Pro disc with seriel that I want to now re-install over the bad version. The problem is when I try to run the CD for install, I get an error message stating that I cannot install from the CD because the version of Windows I am currently running is newer than that on the CD.
    So my question is, how do I uninstall the bad version of Windows and re-install the version off the CD? I know I will lose my files and programs but everything is backed up and I will reinstall everything when I get back up and running.
    Thanks for the help!!

    You can format from Windows CD if that is what you mean by "windows side."
    Updates are usually done while boot in the OS you want to 'upgrade' while custom is only done booted from other media.
    With a Mac Pro you could easily install in many different ways than if you only had a laptop or imac.
    But you can't "pick yourself up by your own bootstraps."
    I don't even like upgrade of SL while booted in Mac OS.
    If it was my Mac I'd install Windows 7 and make better use of your hardware and the performance afforded.

  • Have Imac with boot camp windows 7. Sound works great in mac but no sound in windows?

    I have new IMAC 24 with snow leopard os and installed windows 7 ultimate 32 with boot camp. The sound works great when in MAC but there is no sound when boot up in windows.The mixers show a sound level as music is plaing but no sound out of speakers or earphones. I read on forum that many others have had same situation with Mac Book Pros and had success by downloading new realtec audio drivers, but my system has Cirius 2406 ab9 drivers and I can't find any replacements for them. Does anyone have a fix?

    Keep on trying, keep searching as there are quite a few work around's for different issues.
    One way is to reinstall the Boot Camp drivers and update them again via the Apple Software Updater in Windows. You did update them the first time, right?
    Or extract the sound drivers from the Boot Camp package (or the DVD if you have it) and just install those again. You should find a few how-to's in the search results.
    Sorry I can't help more...

  • How can I force mount a dvd that isn't even seen by Disk Utility? I can see it on the Mac when using my Windows 7 partition via Boot Camp, but not in Lion, which is how I would rather be running.

    How can I force mount a dvd that isn't even seen by Disk Utility? I can see it on the Mac when using my Windows 7 partition via Boot Camp, but not in Lion, which is how I would rather be running.

    Well if there is a EFI block, then running a program in OS X isn't going to do a lick of good.
    After all EFI was designed for Trusted Computing and Digital Rights Management, to act between the OS and hardware, can read drives, contact the Internet and everything.
    Windows doesn't use EFI, will have UEFI in Windows 8 though.

  • Installing Windows 7 With Boot Camp on Mac Pro 3.1 w/GTX285 Video card

    I have an Early 2008 Mac Pro 3.1 running the latest version of OS 10.6 with all updates.  I have an nVidia GTX285 card installed in the Mac Pro that has been working fine for at least six months under OS 10.6 with Mac drivers downloaded from the nVidia web site and installed under OS 10.6.  I replaced the ATi 2600XT video card with the nVidia GTX285 in order to have CUDA support in Premier Pro CS 5 and it works beautifully.
    I now wish to install Windows 7 Professional 64 bit on this Mac Pro.  I have never had any version of Windows installed on this Mac Pro.  I am using Boot Camp assistant and a new full version of Windows 7 Professional 64-bit.
    My question is do I need to remove the GTX 285 graphics card and replace it with my AT 2600XT before installing Windows 7?  This would be a real pain to do because the two connectors to the motherboard are hard to get to.  However, since Apple never used the GTX285 in any of its computers, I am worried that I will not have any video display when I go to try and install Windows 7 with Boot Cam assistant. 
    Please advise me whether removing the graphics card is necessary before installing Windows 7 with Boot Camp.
    Thank you in advance for responding.
    Tom

    NO.... he has a workstation, and not MBP, nor are "drivers already loaded."
    How I would proceed -
    Install Windows on its own drive. 
    Pull all the other drives.
    Boot from Windows 7 Pro DVD
    Forget Boot Camp Assistant, it doesn't do anything - unless you really want to install Windows on the SAME drive as Mac OS - not ideal and not what most of Mac Pro owners do.
    Just insert your OS X DVD once Windows is up to date - helps to buy the SP1 OEM version $129.
    Run Apple SETUP.exe (Boot Camp 3.0.x drivers) and update with ASU or manually to 3.2.
    No you don't need to go back and use that ATI. And you dont' want to be in the situation of changing from ATI to Nvidia and all the hassle that adds. you are fine.
    The Mac Pro is as close as anything to a standard Wintel workstation. 
    Add MS Security Essentials or KIS or whatever you favor. KIS2011 or NIS2011 are good, MSSE 2.0 is free and based on their enterprise product.
    AV-Test.org Test Security-Software

  • Windows 8.1 with boot camp on mac mini  troubles

    After installing a licensed Windows 8.1 with boot camp on my mac mini (2012,i7,4gb ram) my mac os Mavericks have trouble with starting,and i can't run recovery and safe mode.Another problem-i don't have sound in windows,but windows show me no troubles,and red light apear!!!Please help!

    Hello Mickaelpopo,
    Thank you for the question.  It sounds like you are trying to install Windows 8.1 using Boot Camp 5 on your MacBook Pro.  Currently, Windows 8.1 is not a supported version of Windows for Boot Camp:
    Which versions of Windows work with Boot Camp 5?
    You can use:
    Microsoft Windows 8.0 (64-bit)
    Microsoft Windows 8.0 Pro (64-bit)
    Microsoft Windows 7 Home Premium (64-bit)
    Microsoft Windows 7 Professional (64-bit)
    Microsoft Windows 7 Ultimate (64-bit)
    Windows XP, Windows Vista, and Enterprise versions of Windows 7 and Windows 8 are not supported.
    Windows 8.1 is not supported with Boot Camp 5.
    You can find more information here:
    Boot Camp 5: Frequently asked questions
    http://support.apple.com/kb/HT5639
    Thank you for using Apple Support Communities.
    Best,
    Sheila M.

  • When i want to install windows7 on my snow leopard(10.6.4) with boot camp assistant,said that you must update your mac,i do this and try to install windows7 again but i have this problem again?what can i do?

    when i want to install windows7 on my snow leopard(10.6.4) with boot camp assistant,said that you must update your mac,i do this and try to install windows7 again but i have this problem again?what can i do?

    Graham Giles wrote:
    Have you seen this type of problem before? I think it could be a serious issue for anyone in a similar position.
    No; but then, I've not had occasion to use TDM. I've been using firerwire drives for over 10 years, both FW400 and FW800, with no issues except a bit of instability using a B&W G3 machine.
    TDM should be safe. Using cautious, manual copying of files from the Target machine to the Host machine should not result in unexpected loss of files or damage to the Target drive's directories. It should behave exactly the same as if it were an external (to the Host) firewire drive.
    •  I don't suppose there is anything I can do to 'put back' lost items from a separate Time Machine drive which has an up to date backup on it.
    There is probably a way to do that - seems to me that's one of the reasons for a Time Machine volume.
    On the other hand, if the Time Machine volume is rigidly linked to the now-absent OS on the original drive, there may be no way to effectively access the files in the TM archive.
    I know that using a cloned drive would work well in this instance.
    I have no experience with Time Machine, so perhaps someone who has will chime in with suggestions.
    With the machine in TDM with the other machine, have you tried running Disk Utility to see if you can effect repairs to the drive?

  • Mouse not working with Boot Camp after 10.5.7 update

    I upgraded to 10.5.7 recently, and now my mouse doesn't work on Boot Camp. It doesn't seem to register, and I can't move the pointer. I tried this with two mice that worked just fine on the Mac OSX side. Any ideas? Has anybody else noticed this?

    I have a new (July 2009) iMac24 and neither the wireless mighty mouse nor keyboard work with Boot Camp XP Home Edition SP3. They install OK with the Bluetooth control panel, but then after five or ten seconds, drop out of the control panel and have to be discovered again. I spent two hours today with a Mac support expert, but no joy. We both gave up. It seems the wireless mouse/keyboard does not work with Boot Camp. If anyone hears of a solution, please let me know.

  • Mac with boot camp. i got problem with the clock .. help please ..

    hi. im using macbook pro. my mac hav been install with boot camp. so now i run two operating system. mac n windows 7 (64 bits) but i can set my clock time correctly for both my OS.. how can i solved this .? i hav doing  google search about this... but i found nothing.. can sumone help me

    Your OSX psrtition and your Boot Camp partition are completely separate. You can reinstall Mavericks without affecting Boot Camp and you can redo Boot Camp without affacting OSX.

  • Problem on early 2009 iMac with OS 10.5.8 500gb hdd after uninstalling Windows with boot camp there is still no more disc space available

    I had a partioned HDD 250 gb Mac and 250 gb Windows. I have uninstalled Windows with boot camp but still dont have the extra 250 gb available. What to do now?

    You need to remove the partition you created when you set up BootCamp.
    http://www.macworld.com/article/1156195/delete_boot_camp.html

  • I have an older Mac Pro (2006). I want to install Boot Camp and Windows. I have installrg a purchased Snow Leapord on the machine. To install  Windows, am I limited to Windows 7? And where are the Windows 7/Boot Camp Drivers? On the OS disk? Download? Tha

    I have an older Mac Pro (2006). I want to install Boot Camp and Windows. I have installed a boxed Snow Leapord on the machine. And it says the download of the Boot camp drivers cannot continue because they are not available. But at that point I have not inserted a windows disk, so how does it know i have XP?
    So it appears I am limited to Windows 7? And where are the Windows 7/Boot Camp Drivers? On the OS disk?
    Finally, since I have necer considered Windows 7 before, I assume there are no compatability issues with mainstream applications that were running in XP?
    Thank you.

    You're welcome
    Just remember to reformat the partition (bootcamp partition) to NTFS with the windows installer, ensure to pick the correct partition.

  • Share files between Mac and Windows in same iMac with boot camp

    Hello,
    I am new in using Mac and recently I buy a IMac 24" model.
    I used to use PC a long time with a lot of old document.
    I want to install Windows XP with boot camp.
    But I also want to share my documents, music, video files between Mac and Windows in same iMac.
    How can I do this?
    Thanks in advance,
    Eric

    Hi Eric and welcome to Discussions and the Apple world.
    Mac OSX can read and write from Windows partitions (like the BootCamp Windows partition you are about to create) when using FAT32 as file system for Windows.
    However with FAT32 you are limited to a partition size of 32GB.
    Mac OSX can also read from Windows partitions that uses the NTFS file system, but it can not write to them unless you use a third-party helper like either Paragons NTFS for Mac http://www.paragon-software.com/home/ntfs-mac/ or NTFS-3G http://www.ntfs-3g.org/
    Windows can not even see or use a Mac OSX partition without additional help by MacDrive http://www.mediafour.com/products/macdrive/
    Regards
    Stefan

Maybe you are looking for