Reinstalling Mac OSX and Pro Application Support

I just reinstalled OSX today and ran all the updates available - every other application I've tried is fine - except for Logic Pro. (9.0.2) The error message reads:
This version of Logic Pro requires Pro Application Support 5.0 (883.0) or newer.
ProKit: 722.0 (OS BUILD 9L31a)
One of the updates I downloaded was Pro Application Support, but Software Update says it's version 1.0. I don't remember installing this stuff when I first set up Logic - where can I get 5.0 again?
Thanks

Hi,
Is this what you are looking for...? Link for Pro kit 5 for Leopard:
http://support.apple.com/downloads/ProKit5_0_for_Leopard__Mac_OS_X_10_5
Cheers

Similar Messages

I wanna reinstall Mac OSx lion on MacBook pro, my problem is I dint purchase OSx lion with my apple Id before.so anybody can tell me how to purchase OSx with my apple Id on MacBook

I wanna reinstall Mac OSx lion on MacBook pro, my problem is I dint purchase OSx lion with my apple Id before.so anybody can tell me how to purchase OSx with my apple Id on MacBook

Nope. You can purchase a Snow Leopard DVD for $29.00 through an Apple retailer or ordering from AppleCare:
Apple Store Customer Service at 1-800-676-2775 or visit online Help for more information.
To contact product and tech support visit online support site.

I cannot able able to start my macbook and then i started my mac in a recovery mode now mac os X utility window opens with 4 options 1. Restore From Time Machine Backup 2. Reinstall Mac OSX 3. Get Help Online 4. Disk Utility if i try to restore my mac wit

i cannot able able to start my macbook and then i started my mac in a recovery mode now mac os X utility window opens with 4 options 1. Restore From Time Machine Backup 2. Reinstall Mac OSX 3. Get Help Online 4. Disk Utility if i try to restore my mac with time machine no option appears if i reinstall from Mac OSX error comes and cannot able to recover from disk utility please help how can i reinstall mac OSX

Guitar21,
your MacBook Pro has booted into its Recovery mode. From the OS X Utilities menu, select Disk Utility. On the left-hand side of the Disk Utility window, select your internal disk’s boot partition (typically called “Macintosh HD”). On the right-hand side, press the Verify Disk button if it’s not greyed out; if it is greyed out, or if it reports that errors were found, press the Repair Disk button. Once the verification/repair is completed, exit Disk Utility and select Restart from the Apple menu to restart in normal mode. Does it get to the login screen now?

Pro Application Support 3.1 and 1.0 update

The is New Pro Application Support
for 10.4 users
http://www.apple.com/support/downloads/proapplicationsupport31macosx104.html
for 10.3.9 users
http://www.apple.com/support/downloads/proapplicationsupport31macosx1039.html
the Pro Applications Update 2005-02 v1.0 can only be updated on Software update
it'll be good idea if y'all update, I'm not sure what this one fixes but just like the last one, this one might also fix alot of problems
p.s: Make sure you restart your mac and repair permission after installations for safety
stash

The reason that the audio objects got bigger when inserting a plug or assigning a group is that the audio object is not "one" size" you can actually change the the size of an audio object! Drag it 4 times the size and you'll receive a grey big and ugly fader:-) Theres little "headroom" if you want the fader to lookk like you're used to but the size is actually variable:-)
Anyway it's great that the standard size is now not changing its size when instatiating:-)
25G'S

If you reinstall Mac OSX 10.5, does it erase all your files and settings??

If you reinstall Mac OSX 10.5, does it erase all your files and settings, if it does, how would you install iMovie by itself, because I accidenatlly deleted imovie

jd087 wrote:
If you reinstall Mac OSX 10.5, does it erase all your files and settings,
that depends what reinstall option you choose. an erase and install will erase everything. an archive and install will preserve user data and applications.
However neither one will reinstall imovie which is part of ilife which is separate from the OS itself. you can reinstall ilife only. there is no need to reinstall the whole OS. if you bought ilife separately then use the ilife DVD. if ilife came with your mac then insewrt install disk 1 that came with your computer, open it in finder and double-click on "install bundled software only".

I was told to uninstall then reinstall itunes because "no apple application support"so i did, now wont recognise my iphone and says to uninstall itunes and instll the 64-bit version of itunes so i did again,and again,and again.still wont work pls help me?

I was told to uninstall then reinstall itunes because "no apple application support", so i did, now it wont recognise my iphone and says to unistall+install the 64-bit version of itunes so i did, again..and again..still nothing please help me?!

Let's try a standalone Apple Mobile Device Support install. It still might not install, but fingers crossed any error messages will give us a better idea of the underlying cause of why it's not installing under normal conditions.
Download and save a copy of the iTunesSetup.exe (or iTunes64setup.exe) installer file to your hard drive:
http://www.apple.com/itunes/download/
Download and install the free trial version of WinRAR:
http://www.rarlab.com/
Right-click the iTunesSetup.exe (or iTunes64setup.exe), and select "Extract to iTunesSetup" (or "Extract to iTunes64Setup"). WinRAR will expand the contents of the file into a folder called "iTunesSetup" (or "iTunes64Setup").
Go into the folder and doubleclick the AppleMobileDeviceSupport.msi (or AppleMobileDeviceSupport64.msi) to do a standalone AMDS install.
(If it offers you the choice to remove or repair, choose "Remove", and if the uninstall goes through successfully, see if you can reinstall by doubleclicking the AppleMobileDeviceSupport.msi again.)
Does it install (or uninstall and then reinstall) properly for you? If so, can you get a normal iTunes install to go through properly now?
If instead you get an error message during the install (or uninstall), let us know what it says. (Precise text, please.)

I have the Mac OSX and I accidentally erased iPhoto, how can I reinstall it?

I have the Mac OSX and I accidentally erased iPhoto, how can I reinstall it?

Either redownload it from the Mac App Store or reinstall it from your iLife DVD or if it came pre-installed you can reinstall from the original discs that came with the computer.

I just wrote over firefox 3.6 with 5.0 for my mac OSX and discovered my mac won't support it. Is there a way I can recover all my lost files and get the old version back?

i just wrote over firefox 3.6 with 5.0 for my mac OSX and discovered my mac won't support it. Is there a way I can recover all my lost files and get the old version back?

You can download and install Firefox 3.6 from http://www.mozilla.com/firefox/all-older.html

Problem reinstalling Mac OSX 10.5

I am having a problem with reinstalling Mac OSX 10.5 after putting in the disc to do it everything was fine it asks what language I want and then it tells me that it can not be installed on this computer. I am trying to install it on a MacBook bought last year it is an intel machine and I have always kept up on the system updates. I don't want to take it in to a store more because I am stationed in Japan and getting it to a store requires more work than it is worth. If there is any advice on what to do I would greatly appreciate it.

You need the original grey system discs for each Mac model you own, not just to be able to reinstall the OS but also to reinstall the model's bundled retail application software (like iLife, if included) & to run the very model-specific Apple Hardware Test it contains if that is ever required.
The retail Leopard discs do not include either of these capabilities, so unless you are desperate to get Leopard reinstalled on the MacBook, you should try hard to find the original MacBook system discs. Failing that, you can contact AppleCare & request a replacement disc set. Generally speaking, Apple will ship one to you for a nominal replacement cost if you can show that you own that model by providing its serial number or other proof of purchase information.
Regarding installing Vista or Windows XP, both the retail Leopard & system discs include Boot Camp, which includes a convenient utility to format the hard disk for dual booting. While complicated, this can be done without that utility but you still need the hardware drivers the disc contains to get the full use of the Mac's hardware when running Windows. I have no idea if say an iMac's system discs have the Windows hardware drivers that also support a MacBook or if this too is model-specific, so on that you are on your own.

Cannot go to the Internet from Mac OSX, and Fedora Core 5

All Windows users (XP, 2000, Vista Beta) can connect to the Internet no problem on WRT54G with Firmware v4.20.6 (may 26, 2005). But odd enough, though getting the right DHCP assigned IP addresses and DNS server address, MacBook Pro (OS 10.4.1) and Fedora Core 5 cannot go to the internet at all using Safari and firefox browsers: the message keeps saying that your computer is not connected to the internet. Tested with BOTH wired and wireless connections, no luck to the internet. So, it's not about the wireless settings and setup. It doesn't work even if I directly connect the CAT5 cable to the router port.
Tested at wireless hotspots, at work where we have Cisco access points, and at a friend's place where there is netgear wireless router, MacBookPro is just working fine connected to the internet.
Any suggestions? Linksys doesn't support Mac and Linux PCs at all?

Thank you very much All (devildance, and Frank).
Seems like it is working fine now...
I reset the router as factory default, and reconfig the wireless setting(disable broadcasting SSID, configure TKIP PSK, and MAC filtering). Directly connected CAT5 cable from the router to my MacBookPro Windows XP. Working fine. Switched to Mac OSX, working fine. But, when I disconnected the LAN, and attempted to connect wireless, I couldn't go to the Internet using Safari and Firefox: keeps saying that your computer is not connected to the Internet.
Still could ping to 4.2.2.2 and 207.232.22.25, but getting errors "could not resolve the host name" when I pinged with the hostname bearshare.com.
Connected the wired CAT5. Working fine. Unplugged and used the wireless, could not get to the internet.
Checked the NICs settings on both LAN ethernet and wireless airport. All seems the same and correct: IP address, subnetmask and gateway address, and NO DNS entry. The same settings, but works on LAN cat5, and not works with wireless. So, for the sake of it, just manually added the DNS server IP addresses and domain names on wireless NIC. And Wala...it is working fine with wireless. Still strange the fact that Ethernet LAN NIC still doesn't have any DNS entries and working fine, but required DNS entries on wireless NIC.
For Fedora Core, could ping and resolve names without changing any settings. But when going to the Internet, got the error saying "comcast doesn't support this platform/OS" and another error "Welcome to Comcast High speed Internet....registration currently unavailable" when attempting to go any websites. Notieced that we pinging cnn.com, bearshare.com, or any websites, got ping reply from the same IP address which appears to be one of the comcast DNS server IP, 68.87.64.132.
So, I think it is a comcast issue not supporting Linux or something else which I would need to call to Comcast about...
But, thanks...looks like I can go to the Internet on Mac OSX, and Fedora core now with Linksys WRT54G. Thanks so much guys for all the suggestions....

I am trying to reinstall Mac OSX, but my computer does not read installation cd

Hello, I am trying to reinstall Mac OSX, but my computer does not read installation cd. After restart, I hold C but either eject cd or doesn't read and computer boots up normally. I even ordered a new pack of installation cd, but still the same problem. Is there anybody can help me fixing this issue, because my Macbook pro has lots of software problem and when I spoke to tech, they said it needs to reformat and reinstall the OSX to solve all my problems. Please help me to reinstall my OSX!

Possible solutions:
You need to hold the c key down before booting
You need to use the built in keyboard, you have other hardware connected
You need the machine specific 10.6.4+ disks for that machine, the retail 10.6.3 disks won't work
There is a firmware password on the machine preventing the at boot key command functions
Try the option key for Startup Manager to boot from the disk, right after the "bong"
Your Superdrive lense is dirty or not operating, other hardware issues
You have malware of some sort

How do I reinstall mac OSX 10.6.4?

how do I reinstall mac OSX 10.6.4?

Reinstall 10.6.4? exactly?
Only if you have 10.6.4 on machine specific disks that came with your computer (or you can call Apple for the disks)
However if you Software Update, Apple will bring your machine up to 10.6.8 automatically, with all the security and bug fixes. No choice to stop at 10.6.4 exactly.
10.6 is the Snow Leoaprd operating system, 10.6.3 or 10.6.4 or 10.6.8 is the updates to 10.6 that also occur when you run Software Update under the Apple menu.
So if your machine originally came with 10.5.x something and you upgraded via the 10.6.3 white retail disk, if you Software Update, you can't get to 10.6.4, it will just bring you to 10.6.8.
So if you want to reinstall 10.6.4 specifically, it would have to be the machine specific disks if your Mac orignally came with 10.6.4, else you will be force upgraded to 10.6.8 from any 10.6 version.
Now there are two ways to resinstall OS X, one way is to write say 10.6.8 over with 10.6.3 or 10.6.4 via the disks, and only 10.6 is overwritten, not your third party programs (most) and not your files. However you will need to Software Update, because your Apple related support files have been changed.
See #8 Reinstall Just OS X for that then Software Update to 10.6.8
Step by Step to fix your Mac
Another method is to wipe the entire drive or boot partition, then install 10.6 from the disk, then you don't have too Software update to 10.6.8 to get all the bug/security fixes if you don't want too.
I don't know what you want exactly, but I'll give you the links.
How to erase and install Snow Leopard 10.6
If your going to sell the machine this link will assist in gettiing all your data off
How do I securely delete data from the machine?
This is both methods explained, but I haven't seen it in awhile.
How to reinstall just OS X or erase/install OS X

Can't install Pro Application Support 3.0 onto 10.3.9

Topic says it all, sort of. DL'd Pro Application Support 3.0 to install on a Mirrored Drive Doors ("Wind-tunnel") G4 running 10.3.9, which appears to have stabilized on aninstall of 10.3.9, QT still at 6.5.2. Nogo on the install of Pro Application Support 3.0. DL works fine, file looks great, install proceeds smoothly, but when the drive icons are shown in the next to last step, ticking off the drive with Logic Pro version 7.1.1(8885) elicits the red exclamation point. What gives - anybody know?
mb
PM G4 MDD DP 1.0GHz 1.75RAM Mac OS X (10.3.4) PT/Mix+, Capybara, MIDI doodads, acoustic stuff

There are two versions of Pro Application Support: one for 10.3 and the other for 10.4. Are you sure you got the right one?
Also, there is a newer version of it (3.1). For 10.3.9, and for For 10.4.
MDD Dual 1.25 G4 | 2GB RAM | Mac OS X (10.4.4) | Logic Pro 7.1.1 | AMT8 | Delta 44 | SoundDiver 3.1 PB2

Pro Application Support message alert

Hi All
I've been using Logic Pro for a year now. Recently my Mac was running software updates
but my battery run out during this time and my Mac power cable wasn't connected. Thus the updates
were interrupted and incomplete.
When I started my Mac I had several issues (I couldn't access Mail / Safari etc). I was advised
to re-install my start-up dics, which I have done. All applications are now working apart from
Logic Pro. When I try to open it I now get this message:
"This version of Logic Pro requires Pro Application Support 4.0 (687.0) or newer.
ProKit: 591.0"
Anyone have any ideas as to how best to resolve? Appreciated. D

Data Stream Studio wrote:
Download and install Pro Application Support 4.0
...or newer.

Reconnect Magic Mouse/keyboard after reinstalling Mac OSX

After about a week I finally managed to reinstall Mac OSX Snow Leopard...I took a RAM stick out at random and it worked...good thing there weren't any Genius bar appointments which suited me.
Anyway, now I need to connect a keyboard
I've already got my USB keyboard in it (The same size one as the wireless one...but this one's wired)
I've unplugged it, plugged it back in. I've dug out my wireless keyboard and nothing's happened (Yes, the green light blinks...)
I put my iMac to sleep, I turned it off, it still isn't working...
I could try and find a wired mouse/keyboard somewhere...but I can't believe my wired Apple keyboard isn't working with it ^_^
I'm surprised Apple think this wireless stuff is a good thing...I'm more surprised my wired keyboard won't connect...
It's an iMac 11,2 (I think - Whatever the late 2010 one was) and I'm running Snow Leopard.
Also - When's it safe to put the RAM back in? Or is it actually faulty and I need to get a replacement? How can I check?

Just to clarify, this is what I want/hope to do:
Backup my iMac using Time Machine (Complete)
Format the iMac to factory settings (Complete)
Reinstall Snow Leopard (Incomplete)
Restore some files and folders (Incomplete)
Maybe upgrade to Lion...if I'm in a good mood.
I'm mainly doing this because my hard drive stopped last week, and the hard drive fan sped up. I had to restart, went into safe mode and...I don't actually know what you're supposed to do in safe mode so I restart normally. The next day, I turned my iMac on and it had that bar below the logo as if it was booting in safe mode, the bar appeared to have stopped, so I turned the iMac off, and upon turning it back on, the bar was back, so I decided to leave it and it started fine. The next day, once again, the bar was there so I left it, but once it got to the desktop, Finder wouldn't load, I tried relaunching Finder a few times, then restarted the computer, if I remember correctly, it restarted and Finder wouldn't load again. I tried again, this time it wouldn't boot at all, I Googled it a bit and tried resetting the PRAM, SMC etc., then found that you can read what's happening when it's booting to safe mode, and many errors came up saying that some numbers were incorrect, after a few minutes, it said "Halting CPU" or something, and that's when it turned off. I then booted from the disc, and restored using the Time Machine backup. I wasn't pleased with the backup; some applications failed to load properly. I thought I might as well restore it and just copy a few files across, to save space and speed up the computer.
The many times I tried reinstalling Snow Leopard, it didn't work. I tried many things, and last night I decided to make a disc image or something to a USB stick. I don't think it was an image, because the tutorial I followed which worked didn't require that you create an image. After trying to install from the USB stick, it failed, I then removed a RAM stick, it finally worked! But my keyboard wouldn't connect...that's when I came to creatin this post, and I tried reinstalling again, it failed to reinstall, I tried removing the other RAM stick, still failed.
Last week wasn't the first time my hard drive suddenly stopped, it's happened a few times before, but the hard drive fan hasn't sped up upon the hard drive stopping, and it's also managed to start again and the computer to continue working a few seconds later. Maybe it is about time I take it to Apple...but my warranty's ran out so I'm not sure if they'll help me.

Reinstalling Mac OSX and Pro Application Support

Similar Messages

Maybe you are looking for