Reinstalling SCSM with new Management Group and existing DB

Hello!
My customer has an issue. He installed SCSM MS and called Management Group with spaces. Because of that DW cannot use it Data source.
As I know I cannot change name of Management Group and have to reinstall SCSM from scratch. But I need to keep his existing ServiceManager Database.
Do I have an option to make a brand new MG, but keep an existing Database?
Thank you!

Hi Schubarov,
The management group is a difficult one because the database is based on the name of the management server and the management group name. These really have to remain the same to be able to use the SserviceManager database.
When installing the Management Server, the installation wizard should not allow you to enter spaces if they are not supported. Not sure how they managed to get the spaces in the Management Group name to start with. I'd be keen to know if the Wizard allows
spaces, but the DW registration does not.... That sounds like a terrible bug if it is true.
There are a few guides out there, but they are NOT supported by Microsoft and who knows what could happen.
Sorry that there is not a simple answer.
Brett
Brett Moffett

Similar Messages

Creation of new employee groups and sub groups

Hi All,
What all the steps should I follow to create new employee groups and sub groups? and How many structures should I create for this?
Its urgent pls.......
Good replies will be rewarded!!!!
Regards,
Sita

Hi
You can create the employee groups depending up on your clients requirement, Eg: Permanent, Temporary, Seasonal, Trainee, Advisor etc
And define the employee subgroups and assign them to the employee groups Like
Enterprise structure>Definition>Human Resource Management-->Employee Groups & Employee Groups
Enterprise structure>Assignment>Human Resource Management-->Assign employee subgroup to employee group
you can create employee subgroups depending up on your requirement like asst manager, manager, GM, MD, VP ETC an assign them to the employee subgroups ok.
Ensure that certain empployee subgroups may not be assigned to employee group based on requiremen, but create all the employee sub groups which is existing in the organization.
Regards

Creating New Security group and Refreshing Security Filters

Hi
I have created a new security group (and added people to it)
I have given this security group write access to certain dimension members within the planning application
I have refreshed the security filters via Planning_Manage Database_Security Filters
But the people in the new security group still dont have write access to the dimension members
If I look in EAS ... I cant see the the new security group that I have created
Question 1
Do I need to refresh the security filters via EAS
If I do this ... I know that I need to make sure that no one is in the Essbase application
Do I also need to make sure that no one is within the relavent planning application?
Question 2
Is it enough to refresh the security filters (tick security filters) .. or Do I need to tick database in the manage database options
Question 3
Does anyone have any suggestions that I havent mentioned above?
Thank you
PD

Hi John
Thanks for your suggestion
I tried this and He still doesnt have write access
He doesnt need to be able to lock and send values via essbase ... However when we are in planning, He cant submit data to the dimension members mentioned above.. i.e the cells are all green
I have checked and doubled check the security on the dimension members (and form security) in the form that he cant edit
Do you have any other suggestions?
Thank you
PD

MTS with batch management, serialization and Handling unit

Hello All,
I am testing a scenario for MTS with batch management, serialization and Handling unit for discrete manufacturing.
Everything worked fine till I created the Handling unit for the finished product.
The production order has a quantity of 3 EA.
It has three serial numbers 1, 2 and 3. (serial numbers can be displayed from order->Header->serial numbers)
I created one Handling unit for production order quantity of 3 EA.
I tried to do a goods receipt for the production order using transaction COWBHUWE.
I get the following error when I try to post the GR:
Only 0 serial numbers entered instead of 3
Message no. IO304
Diagnosis
There is a serial number obligation, so the number of serial numbers must equal the number of serial numbers in the material document.
You can post the operation only if you entered the correct number of serial numbers previously.
System Response
Depending on the context in which the error arises, the system continues processing, or the required function cannot be performed.
Procedure
You have the following options, for example:
Check that the serial numbers are entered fully.
If necessary, display an error log.
If necessary, contact your system administrator.
What did I miss?
How to fix this problem?
Please help.
Thanks in advance
George

I added the serialization procedure HUSL to the serial number profile and it fixed the problem.

How to create a new security group and assignments of rigths?

Hi,
In our current "Cisco Unified CM Administration System version: 7.0.1.11000-2" installation, we are a couple of administrators using the same user account to logon to the "https://10.10.x.x/ccmadmin/showHome.do" homepage.
Where can I create a new user group and assign the appropriate rights to the group, and add users to the group? Or is it another approach that I need to follow instead of the way that security rights a made in a Microsoft Active Directory?
Is there any place that I can read or view examples on how the setup can be done? I would like to have it in the way that everyone has their personal user account and use this to logon the administration-web page instead of an account that everyone uses.
Kind regards,
Carl-Marius

why do you need to create a new business group? To implement HR? If so, linking a HR responsibility to your user, is one of the few steps to go anyway.
How you did it on the test environment?
Why not link a hr resp to your user temporarily, and disable it later.
I'm always afraid to answer this kind of questions, since the real requirement is not described.

[svn:osmf:] 13083: Updated MASTAdapter class with new trait names and events.

Revision: 13083
Revision: 13083
Author:   [email protected]
Date:     2009-12-17 16:10:05 -0800 (Thu, 17 Dec 2009)
Log Message:
Updated MASTAdapter class with new trait names and events.
Modified Paths:
    osmf/trunk/plugins/MASTPlugin/org/osmf/mast/adapter/MASTAdapter.as
    osmf/trunk/plugins/MASTPluginIntegrationTest/src/org/osmf/test/mast/TestMASTPluginInfo.as
    osmf/trunk/plugins/MASTPluginIntegrationTest/src/org/osmf/test/mast/adapter/TestMASTAdapt er.as

Silviu!
I'm really sorry, but as all the office is trying to fix the problem, someone replaced the url content with the stuff that was pointing to the local machine.
I've fix it, and the video player is available here again: http://pp.player.webtv.flumotion.com/params/apiKey/5PzLR2ULL3z2rumJ/videoId/60
If there are other references to the localhost, please do not bother with them, as they do not affect player functionality.
The stream that it uses is an RTMPE, so i'm afraid it will only works with this player. Anyway, the stream url is as follows: rtmpe://87.248.205.81/a4349/e2/veo7/ondemandrtmpe/mp4/med/first-person-mario-4d8741aa.mp4
I really appreciate your help!
Thank you!

Is there a way to burn old cd's with new cd's and get the same volume/quality on playback?

is there a way to burn old cd's with new cd's and get the same volume/quality on playback?

RIP the CD as AIFF or WAV.
Create a playlist then burn an audio CD.

I have a new MacBook Pro, and existing iPad 2 and iphone.

I have a new MacBook Pro, and existing ipad 2 and iphone 4s. icloud was already set up on the iphone and ipad, and it is now set up on the MacBook Pro. However, when I make an entry in one device, it does not populate the other two devices. Also, all my podcasts and music did not populate itunes in the computer. What am I missing?

Could you please confirm what it is you are making an entry in, that isn't syncing (address book, iCal etc)
Is there any reason you think iTunes should automatically fill your library for you.

How do I sort out 'Apple ID disabled for security reasons' after I had my old Email address and password erased but still showing ?? now I can't access my apple store Apps updates with new email address and password??

How do I sort out 'Apple ID disabled for security reasons' after I had my old Email address and password erased but still showing ?? now I can't access my apple store Apps updates with new email address and password??

You might try contacting App Store Support: http://www.apple.com/support/mac/app-store/

I'm a meeting organizer and I'm using office 365Outlook. When an attendee invited to a meeting tentatively accept proposing a new time for the meeting, I get a message with "New Time Proposed" and, when I open it, the "Accept" or declined or propose new t

I'm a meeting organizer and I'm using office 365Outlook. When an attendee invited to a meeting tentatively accept proposing a new time for the meeting, I get a message with "New Time Proposed" and, when I open it, the "Accept" or declined
or propose new time button is grayed out so that I cannot accept the new time. When this occurs, I must create a new meeting request with the new time that has been proposed.

Use the trackpad to scroll, thats what it was designed for. The scroll bars automatically disappear when not being used and will appear if you scroll up or down using the trackpad.
This is a user-to-user forum and most people will post on here if they have problems. You very rarely get people posting to say there update went smooth. The fact is the vast majority of Mountain Lion users will not be experiencing any major problems with the OS, or maybe with apps which are not compatible, but thats hardly Apple's fault if developers don't update their apps.

Managing Groups and Filters Externally

Can I manage groups and filters from an external agent such as LDAP? Or can groups at least be added, etc from an external API?Thanks.

Best I found on this thread from two years back is to use API or MaxL.Is this still the answer? Anyone know if I can manage my groups in MSAD and grant permissions to the AD groups?If not, is anyone willing to share code/links?respond to group or to tklein at rubytuesday.com

Service entry sheet error.with new material group for services

Dear Experts
We need to create material group for roll shop spare parts service,we created a new material group.
when we are creating PR/PO with item category as D and a/c assignment K( entered cost center here).its giving error message
as RC= 3M8 47 Account determination for entry JSL KBS J001 not possible(while making service entry sheet)
after that i changed PR/PO and gave cost center and G/l account.now the service entry sheet is accepted.
is it necessary give G/L account manually,if user chose wrong G/L account how to avoid this problem.
please clarify me,
do we need to assign valuation class for material group for services?(where to assign)
or
should assign G/L account manually to cost center while creating PR/PO
Please clarify me
Regards,
Varun
Edited by: madhu varun tirupati on Sep 8, 2010 2:48 PM

Hi,
Option-1:-- >
Without creating material group and you can use your other service material group(existing service material group) and create a service master in AC03 as spareservice. Create a Service PO with text as roll shop spare parts service with other details as required like quantity of service, cost center & G/L account etc. After service being completed you can do SES in t.code: ML81N
Option-2:-- >
If you want report at the end based on different material/service group level, you can create a material/service group in OMSF for roll shop spare parts service and then you can assign to valuation class to material group in OMQW t.code. Then carry out regular process service order, SES etc.
Based on requirement, you can enter G/L account manually or can set default G/L account in purchasing document with help of t.codes: OMSK, OMQW, OME9, OMGO & OBYC
For error u201CAccount determination for entry JSL KBS J001 not possibleu201D, you cannot assign KBS transaction/event key to an account in OBYC t.code. Only you can assign G/L account to cost center with your CompanyCode in OKB9 t.code. Check the SAP note: 364570 & 106981
Regards,
Biju K

New BP grouping for existing BP role

Hi Media experts,
We have a requirement to add a new BP grouping for an existing role(Retailer- ISM001) which enable us to create a BP in the retailer role with a different number range. So we created new grouping and customer account group and assigned a new number range.The problem is that we created BP with the new number range but in change mode it shows only the general data.System not showing the company code and sales area datas.
Note: Integration is BP to Customer
Please give a solution
Thanks in advance,
Regards,
Srikanth.M

Thanks for your reply
As you mentioned we checked the configuration, but it is quite okay. We normally create BP with the same settings. You mean to say that we need to change the configuration under u2018Configure Field Attributes per activityu2019 for the new BP Grouping we created? Could you please explain little more about how BP Grouping (Newly created) links with the above mentioned customizing activity? Isnu2019t this customizing common in create, change display activity irrespective of BP Grouping?
with warm regards,
Srikanth.M

New valuvation group for existing valuation area - Account Determination

Hi Experts,
Existing Scenario :
-> Plant level valuvation is been maintained
-> Valuvation group code 0001 is assigned for all the Valuvation Area until now.
Req :
I need to set new account determination for a particular material type for the existing valuvation area.
How to achieve the same ?
1.Do I need to create a new valuvation groupcode and assign the same for the existing valuvation area ?
Your inputs will be helpful.
Regards
Prasath

Hi
For new Material type account determination there is no requiremnt of gioing for anew valuation grouping code.
You go for a valuation grouping code only hwen you need to trigger differnt g/L accounts based on the PLant combination.
YOu can go ahead with the existing account determination by maintaining the new account category reference & valuation classes to the new material type.
Hope this solves your query
Thanks & Regards
Kishore

New Excise Group for Existing Plant

Dear CIN Experts,
We have query, as there is Change in Excise Group for Existing Plant, Question here is weather it is possible from functional part what will be effect on historical data and from CIN [Excise transaction] perspective and how to cope up with new excise related transaction like;
1) Sales Excise Invoice
2) Register Updates
3) Utilization
Kindly expedite from CIN perspective about the pro and cons for the same.
Thanks in Advance,
Ashish

Hi
For new Material type account determination there is no requiremnt of gioing for anew valuation grouping code.
You go for a valuation grouping code only hwen you need to trigger differnt g/L accounts based on the PLant combination.
YOu can go ahead with the existing account determination by maintaining the new account category reference & valuation classes to the new material type.
Hope this solves your query
Thanks & Regards
Kishore

Reinstalling SCSM with new Management Group and existing DB

Similar Messages

Maybe you are looking for