Reinstalling the correct OS

If I replace my hard drive on my macbook pro mid 2011, how can I reinstall the correct OS for my mbp?
I am unable to backup nor log into my mbp due to a hard drive malfunction - It will not boot. Every time I restart, I am stuck on the grey screen with the spinning cycle loading page.
Please help

There are early 2011 MBPs that came with Snow Leopard (10.6)  install disks and there are late 2011 MBPs that came with Lion (10.7).
If the former is that case, use the installation disks to install Snow Leopard and then download the combo update to upgrade it to 10.6.8.
http://support.apple.com/kb/DL1399
If the MBP came with Lion, boot the MBP with the OPTION + COMMAND + R keys.  The display should show a revolving globe.  Follow the instructions and you will be connected to the Apple servers and will be able to install the original OSX that came with your MBP.  You will need a solid Internet connection.
After you have installed the correct OSX, you may go to your App store account and download Mavericks if you like.
Ciao.

Similar Messages

  • HT4623 How can I install the correct 64 bit version of itunes on my iPhone 4?

    How to uninstall itunes and reinstall the correct 64 bit version on my Iphone 4?

    There is no need or no way to reinstall iTunes on your iPhone. Any request you are seeing to do so, would be referring to iTunes on your computer.

  • All of a sudden my iTunes stopped working, and I get the following error messages:   1. the program can't start because MSVCR80.dll is missing from your computer. Try reinstalling the program to fix this problem   and   2. iTunes was not installed correct

    All of a sudden my iTunes stopped working, and I get the following error messages:
    1. the program can't start because MSVCR80.dll is missing from your computer. Try reinstalling the program to fix this problem
    and
    2. iTunes was not installed correctly. Please reinstall iTunes. Error 7 (Windows error 126).
    Now I've checked the forums and followed the advice of uninstalling all Apple applications, rebooting, and reinstalling iTunes.
    This is not working. I've tried installing as Administrator but doesn't make any difference at all.
    There must be a way to fix this? I'm not a tech geek but I want to avoid having to take my laptop back to factory settings to sort this out.
    Thanks

    Click here and follow the instructions. You may need to completely remove and reinstall iTunes and all related components, or run the process multiple times; this won't normally affect its library, but that should be backed up anyway.
    (99192)

  • I use a registered copy of LR5. I lost my hard drive and need to reinstall it on my new HD. Please advise the correct way to do this.

    I Use a registered copy of LR5.5.  my hard drive has been replaced & I need to know the correct procedure to reinstall it on my new HD.  I should get my PC back within a week.  Can you please provide direction for this?

    Paulewog you can install Lightroom 5.6 by downloading the installation files from Product updates.  Please choose the download appropriate for your operating system.  If you need to locate your serial number then it can be found under your account at http://www.adobe.com/.  You can find more details at Find your serial number quickly - http://helpx.adobe.com/x-productkb/global/find-serial-number.html.

  • I've updated all my software and iTunes on my Macbook Pro but when I went to open iTunes it tells me it's either corrupted or not installed correctly and to reinstall it. Is there anyway to fix it without reinstalling the whole program?

    I've updated all my software and Itunes on my Macbook Pro but when I went to open iTunes it tells me it's either corrupted or not installed correctly and to reinstall it. Is there anyway to fix it without reinstalling the whole program?

    Here's a previous discussions that seems to have solved a similar issue in the past:
    https://discussions.apple.com/message/12209861#12209861

  • My hard drive is DEAD.I have to reinstall all my Adobe programms and I need to know exactly the correct process to do ( Indesign CS6-Photoshop CS6 - Photoshop CS5 -Illustrator CS6 - Ligntroom 4 )....

    My hard drive is DEAD.I have to reinstall all my Adobe programms and I need to know exactly the correct process to do ( Indesign CS6-Photoshop CS6 - Photoshop CS5 -Illustrator CS6 - Ligntroom 4 )....
    is any friendly tutorial available ?
    Thank you
    Albert

    If you didn't have the opportunity to deactivate the installations then you should contact Adobe Support thru chat and ask them to reset your activations for all the serial numbers involved.
    Chat support - For the link below click the Still Need Help? option in the blue area at the bottom and choose the chat option...
    Make sure you are logged in to the Adobe site, have cookies enabled, clear your cookie cache.  If it continues to fail try using a different browser.
    Serial number and activation chat support (non-CC)
    http://helpx.adobe.com/x-productkb/global/service1.html ( http://adobe.ly/1aYjbSC )
    Then you just reinstall the programs and activate using the same serial numbers.  If you need to download you can find download available thru the following links...
    CS5 - http://helpx.adobe.com/creative-suite/kb/cs5-product-downloads.html
    CS6 - http://helpx.adobe.com/x-productkb/policy-pricing/cs6-product-downloads.html
    Lightroom - all versions
    Windows
    http://www.adobe.com/support/downloads/product.jsp?product=113&platform=Windows
    Mac
    http://www.adobe.com/support/downloads/product.jsp?product=113&platform=Macintosh
    You might also find the following helpful...
    Download and Installation Help -
    https://helpx.adobe.com/download-install.html

  • I keep having the message the software required for communicating with your ipad is not installed correctly please reinstall, I've uninstalled and reinstalled the latest version of itunes 8 times and no luck does anyone have any advice?

    I keep having the message the software required for communicating with your ipad is not installed correctly please reinstall, I've uninstalled and reinstalled the latest version of itunes 8 times and no luck does anyone have any advice?

    First, for the forum view issue. Go to My Settings (on the right) and in General Settings change the Topic Page View to Flat. Click Save. Posts should show up in the order they were written.
    Have you seen this?
    http://docs.info.apple.com/article.html?artnum=93764
    Also, since you said that you've gone through the 5 Rs, I would assume that you used the iPod Updater to restore (since there is no other way of doing it and you don't "run" the 5 Rs).
    When you restored, did you use the latest updater?
    You may also want to try formatting the iPod through Windows. Connect it to the computer and when it appears in My Computer right click it and go to format. Does anything happen? Can you format the iPod through Windows?
    btabz

  • I Cannot get my organizer to work for Elements 13. "A problem caused the program to stop working correctly. Windows will close the program......" is the error I get. I've uninstalled and reinstalled the program and tried various other things based on the

    I Cannot get my organizer to work for Elements 13. "A problem caused the program to stop working correctly. Windows will close the program......" is the error I get. I've uninstalled and reinstalled the program and tried various other things based on the MANY other complaints with this same issue and nothing is working. How can this problem be corrected?

    Hi,
    Which operating system are you running on?
    Are you upgrading from a previous version of Photoshop elements or is this your first?
    Are you trying to load the organizer or the editor or do both fail?
    Brian

  • My LR4 has suddenly stopped importing photos. Reinstalling the program didn't help. How do I correct

    My LR4 has suddenly stopped importing photos. Reinstalling the program didn't help. How do I correct this application error?

    Does it not work either way? Sending and receiving? Did you check the settings and make sure that nothing has changed? If you can receive email, but not send it, check the outgoing mail server setting. Make sure that your username and password are in there.
    Settings>Mail, Contacts, Calendars>Your email account>Account>Outgoing mail server - tap the server name next to SMTP and check in the primary server and make sure your username and password are entered and correct - even if it says that the password is optional.

  • TS3899 My mail is configured correctly.  When I go to view my inbox I get the 'Load More Messages...' with the number of messages showing.  I touch the display and nothing happens.  I have uninstalled and reinstalled the email account and restarted the de

    My mail is configured correctly.  When I go to view my inbox I get the 'Load More Messages...' with the number of messages showing.  I touch the display and nothing happens.  I have uninstalled and reinstalled the email account and restarted the device.  I can send mail fine as well as view my sent messages.  Very confusing.

    I have two yahoo accounts and I know as they 'improved' their servers I had periodic outages. It'd work fine on my webmail on  my computer, webmail on the iPad, but not via the mail app. And it was stuff on their end. It may be a case of wait and see and you may need to eventually remove/readd the account on your iPhone.
    When the issue is on their end, unfortunately there's not much for users to do beyond wait it out or find work arounds.

  • Can I reinstall Final Cut X the correct way?

    I downloaded Final Cut X and Motion 5 thinking they would sit on my Mac Pro Desktop until I installed them.  I would then follow the Apple partiitioning instructions.  Unfortunately, it appears that they both installed as they downloaded.  I have not opened either yet.
    How can I start over?

    Not sure if you are aware that Apple recommends a separate start-up disk installation when one has the earlier version of Final Cut Studio.  Or, they recommend partitioning a single start-up drive.  I did neither thinking that after I downloaded the software I would be able to then install it after I prepared the disk.  Hence, the dowload apparently has already installed causing me to hesitate to open the new version since Apple suggests keeping the old and new version very separate, which I have not done.
    How might I fix this problem?  This is why I asked "Can I reinstall Final Cut X the correct way?"

  • I had an App on MacBook Air which would cause my computer to be locked. I delted it and reinstalled the App again from the AppStore. Now I am being charged again for the same App. How can I correct this issue and get refund for the double billing?

    I had an App on MacBook Air which would cause my computer to be locked. I delted it and reinstalled the App again from the AppStore. Now I am being charged again for the same App. How can I correct this issue and get refund for the double billing?

    You can't gift it, gifting can only be done from within the store, not from within your library.
    Puchases are considered final but you can try the 'report a problem' link to contact iTunes Support and see if they will refund or credit you : http://reportaproblem.apple.com
    If the 'report a problem' link doesn't work then you can try contacting iTunes Support via this page : http://www.apple.com/support/itunes/contact/ - click on Contact iTunes Store Support on the right-hand side of the page, then Purchases, Billing & Redemption

  • I cannot access firefox because it says it is already running. It is asking me to close the program that is running I cannot find where it is. I uninstalled and reinstalled the latest version. It did not correct the problem

    when I click the firefox link a window pops up saying a the program is already running and I must close that program in order to run a current one. I went through task manager and then completly uninstalled firefox and reinstalled the newest version. This did not help.

    See this article for possible causes and solutions:
    [[Firefox is already running but is not responding]]
    See also:
    http://kb.mozillazine.org/Profile_in_use

  • HT1430 How do I get my inbox working again, I cannot receive outlook mail from my server after I updated last with ios6.1 even if I reinstall the settings correct

    My Iphone 4 with io6.1 will not receive emails only send, I always had no problems before io6.1. I reinstalled the settings of the email account and did everything but still will not work, it says it is downloading messages, but the white dot on the bottom of the screen stays in place and does not run accross.

    Try a reset, hold down the home/sleep button together until you see the apple logo and then release, then wait for the phone to boot back up.

  • How do I install all my old programs and data from an old system folder after I have reinstalled the same OSX system after a crash?

    The system is OSX10.5.8 Leopard on a 2009 imac. A new system was installed from the installation disks and the original system saved to a folder.
    I need to use my Adobe programs, rescue my email, i-tunes and iphoto data.  The disk utility indicates that my Time Machine back-up disk is damaged and I don't want to take a risk of having Time Machine erase my hard drive and try to reinstall the exact system existing at the time of the crash.  There was over 650 gb of stored files that I was copying and removing from the drive at the time it crashed. The total size of the original system file is still about 650 Gb.
    I would prefer to go back in Time Machine and only rescue the programs as most of the files have been copied to external hard drives, but I can't access the back-up hard drive from the new version of the Time Machine.  Or by I don't want the Time Mchine to start copying the new operating system which would include all the data in the old system file. Time Machine was working fine at the time of the crash.

    No, the disk was backed up with time machine a few hours prior to the crash.  I was unable to open the computer when I tried to restart it- got a grey screen with the spinning disk- after a few minutes the screen would go black and would reboot continuously, but not load any images or programs. I started the computer from the 10.5.4 installation disks and checked both the time machine external hard drive and the Imac internal drive with the disk utilities. Both showed as damaged --the internal drive and permissions were repaired, but the external drive (time machine back-up)  was damaged and not repairable by disk utilities. I don't believe that the external drive for Time Machine was connected to the computer at the time of the crash as I was copying files to a different hard drive drive. And I was not having any problems with the TM back-up drive prior to the crash.
    I accessed the Imac internal disk by firewire (as a target disk) and copied as many data files as I had room for on my external hard drives available.  And I deleted quite a few files from the imac internal drive (mostly just jpegs, duplicate tifs, etc--nothing that was used by i-photos, i-tunes or the Mail program).
    Then I installed a new OSX10.5.4 system from the installation disk and the old system was moved to a folder on the hard drive.  I previousy had had the option to reinstall the complete system from Time Machine when I connected that drive and booted with the installation disks with the C key depressed.  But it didn't seem like a good option because I was unsure of the condition of that external disk and whether it would be able to reinstall my data correctly, once it had erased my internal hard drive. 
    I'm considering buying some new external hard drives and backing up the present system to time Machine (so I'll still have my old data in the old system folder).  And then I would try using the old Time Machine back-up to try to reinstall the sytem previous to the crash.  That back-up would reinstall about 700gb of data and operating software and programs which sounds like a lengthy back-up.  Since I have never used Time Machine to do a full reinstallation (I've only used it for individual files), I'm reluctant to do anything rash.
    I'm a professional designer (with a deadline) but I can still use my Illustrator and Photoshop by opening them from the old system folder and saving the files to an external drive.  So it's not neccessary to do anything hasty except to delete some of the excess art and document files that were causing the computer to run slowly and the  Adobe programs to crash when I tried to save my work. I have quite a few books on tape in the i-tumes folder which is probably talking up tons of space but I don't where the i-tunes files live.
    Thanks for any help. Peggy
    Message was edited by: peggy toole

Maybe you are looking for

  • Printed front panel graphics quality (Print Panel to Printer method vs. Append Front Panel Image to Report.vi)

    LV 6.02 (or 6.1) NT 4.0 I have a vi that the front panel includes all the information I need to print except that it is on different pages of a tab control to conserve screen space. I was attempting to programatically cycle the value of the tab contr

  • [solved] Xorg freezing on wakeup with EXA enabled

    I am having a weird issue. Whenever I put my laptop to sleep and then I wake it up, Xorg seems to freeze on me. I've noticed this only happens with EXA enabled and it does not happen when the laptop hibernates. I don't have any other issues with X (a

  • How to create Inbound Delivery using SHPMNT03 Idoc details...

    Hi,      I need to create <b><b>Inbound delivery</b> using idoc SHPMNT03</b> details. I am getting all the data required to create Inbound delivery is from this idoc. for that I need to create a custom function module. I tried with FM  IDOC_INPUT_DES

  • Add functional location in asset master

    Dear Friends, I need to add field 'Functional Location - TPLNR' in asset master data. I find the field TPLNR in table ANLZ but it is not displayed in Asset Master. Kindly help me understand how can I assign functional location to asset master. Regard

  • Launching TextEdit on a Mac from a Java application

    I am having a problem launching textedit from a Java application. It was working a week ago on a fresh iMac, but since then I have installed Lightroom, Photoshop, the Studio MX suite stuff, and now the textedit program does not start from my Java app