Reinstalling Vista, Cannot Install Any Drivers

I've had this computer for a couple of months at work, where 4-5 people can use/mess around with the computer. Long story short, we got a virus and I intended to reformat the computer with my recovery DVD. I noticed the two partitions, and formated them into one (reading through here, bad idea) but whatever, Windows installed just fine. I downloaded all the drivers from Lenovo in advance but I cannot install a single one of them. Apparently my computer is not strong enough to install my (intel) video card and I have no network card.
So, what gives?

welcome to lenovo user forums
could you share your model number of your system/also check out if you have downloaded drivers for the exact version
of windows
Cheers and regards,
• » νιנαｿѕαяα∂нι ѕαмανє∂αм ™ « •
●๋•کáŕádhí'ک díáŕý ツ
I am a volunteer here. I don't work for Lenovo

Similar Messages

[SOLVED] Cannot install any package thru pacman

I cannot install any package thru pacman
when i try to install the package with pacman -S,
I started getting error when my sytem crashed and i have to forcefully switch off my laptop through power button
after that when i install anything from pacman i got following error:
[tan@ARCH ~]$ sudo pacman -S shotwell
Password:
warning: shotwell-0.9.3-1 is up to date -- reinstalling
resolving dependencies...
looking for inter-conflicts...
Targets (1): shotwell-0.9.3-1
Total Download Size: 0.00 MB
Total Installed Size: 9.12 MB
Proceed with installation? [Y/n] y
(1/1) checking package integrity [##########] 100%
(1/1) checking for file conflicts [##########] 100%
(1/1) upgrading shotwell [##########] 100%
ldconfig: File /usr/lib/libgexiv2.so.0.0.0 is empty, not checked.
ldconfig: File /usr/lib/libgexiv2.so.0 is empty, not checked.
ldconfig: File /usr/lib/libgexiv2.so is empty, not checked.
ldconfig: File /usr/lib/libraw.so is empty, not checked.
ldconfig: File /usr/lib/libraw.so.2 is empty, not checked.
ldconfig: File /usr/lib/libraw_r.so.2 is empty, not checked.
ldconfig: File /usr/lib/libraw.so.2.0.1 is empty, not checked.
ldconfig: File /usr/lib/libraw_r.so is empty, not checked.
ldconfig: File /usr/lib/libraw_r.so.2.0.1 is empty, not checked.
Thanks in advance
Last edited by tan (2011-05-29 05:45:28)

Thank God, everything is fixed now:
First, I deleted all these files, then i follows the following procedure
1. For libgexiv2 file i upgraded 'xorg-server, xorg-xinit, xorg-utils, xorg-server-utils' from pacman
# pacman -S xorg-server xorg-xinit xorg-utils xorg-server-utils
2. For libraw file i upgraded 'libraw' from pacman
# pacman -S libraw
There will be some conflicting files
After deleting some conflicting files it solves the problem and restore all the 'lib' file.

Cannot download any drivers or tools from HP website

Hi everyone, no matter if I use Chrome 44 or Internet Explorer, I cannot download any drivers or utilities from the HP-website. When I click on the blue square, which is supposedly where I am expected to click to start the download, nothing happens. I don't have any script-blockers activated. I'm trying to download the Windows-10 drivers and utilities for my Deskjet 2510, but I also checked some other model's drivers and the download does not start either. I don't get an error message or anything. It's just that the download does not start. I'm currently using Windows 7 64 bit, I just want to download the Windows 10-drivers and tools in advance. Please help.

Hi, When you click on the download button, a plug-in gets downloaded first "HPSupportSolutionsFramework.exe", you need to install this plug-in first and click download and the "Blue" button to continue download. Alternate would be to select "Download Only" and click next, this would skip the Plug-in install and start the driver download. Heres the link to downlaod directly. HP Deskjet 2510 All-in-One Printer BopsAlthough I am an HP employee, I am speaking for myself and not for HP.
Say "Thanks" by clicking the “Thumbs Up” in the post that helped you.
Please mark the post that solves your problem as "Accepted Solution"

Qosmio F10-136 - Unable to install any drivers

I have a Qosmio F10-136.
I have recently formatted the hard drive. Since I had lost the recovery disc, I had to use another copy of Windows. I downloaded the drivers available online from the Toshiba website but I have been unable to install any drivers except the wireless LAN. Most driver setups refuse to run at all, some seem to install the files, but the driver is not detected.
Please advise.

> 1. Sound device not working still - When I install the audio effect driver (i.e. toshiba virtual sound), there does not seem to be any effect even though it is installed. Then, when I install the SoundMax Audio System, it gives me an that the driver does not exist.
What do you mean exactly by does not seem to be any effect. Can you hear the sound coming from the speakers? Are there any yellow exclamation marks related to the sound card? If not then the sound card driver has been installed properly and the sound should work!
> 2. I cannot figure how to install the LAN driver.
Where is the problem? Download the LAN driver, unzip the package, access the device manager, choose the unknown device (LAN card), point to the driver files downloaded from the Toshiba driver page and finish the installation.
The LAN card should be recognized properly.
> 3. Same with the TV tuner drivers; there is not setup file.
As mentioned above; you can install the drivers in device manager. Choose TV tuner in device manager (possibly marked as unknown device too.) point to the TV tuner driver files and finish the installation.
> 4. During the windows setup, I had created 3 drives, but I cannot access the drives D & E. When I try to access them, windows asks me to format them, but it gives me an error when I try to do so. Also, the hard drive is not shown in the disk management (not even C drive), so I cannot do anything. Although, the hard drive is shown in the device manager.
If other partitions have been created on the HDD then this should be visible in disk management. I dont believe that you cannot see even the C partition. In my opinion you didnt check this correctly.
Access the disk management (MY Computer, right click, manage). Choose Disk Management. There you should see the HDD and CD/DVD drive.
If the partitions have been created but not formatted then you would see just a free space.
Click right on this space and you could either format this or could delete the partition.
PS: I recommend using a 3rd party tool like Partitions Magic in order to create the partitions on the HDD (Win XP)!!!

X100e - cannot install bluetooth drivers

I cannot install bluetooth drivers on my X100e laptop. When I bought the laptop I had windows xp on it and bluetooth worked fine. But when I installed windows 7 I couldn't install bluetooth. When I try to install latest Bluetooth with Enhanced Data Rate Software II driver I get the message:
"No Bluetooth device was detected. Please make sure that your Bluetooth device is pluged in properly in order to continue installation."
please help.

Hello,
Try running Lenovo's ThinkVantage System Update software to install any missing ThinkPad-specific drivers and hotfixes, then repeat the Fn+F5 key combo suggestion. Does Bluetooth now activate?
Regards,
Aryeh Goretsky
I am a volunteer and neither a Lenovo nor a Microsoft employee. • Dexter is a good dog • Dexter je dobrý pes
S230u (3347-4HU) • X220 (4286-CTO) • W510 (4318-CTO) • W530 (2441-4R3) • X100e (3508-CTO) • X120e (0596-CTO) • T61p (6459-CTO) • T43p (2678-H7U) • T42 (2378-R4U) • T23 (2648-LU7)
Deutsche Community Comunidad en Español Русскоязычное Сообщество

I have updated my iphone 4s with ios6 and now im not able to connect to itunes store. I can open the apps store but cannot install any app? Anyone facing the same issue..

I have updated my iphone 4s with ios6 and now im not able to connect to itunes store. I can open the apps store but cannot install any app? Anyone facing the same issue..

I have a 4S and upgraded to iOS 6 last week without any issues.
Have you tried resetting your phone (hold the power and home buttons down together until the silver apple appears)?

HT201263 I have an iPod Touch which I've had for almost 4 years, with 32 GB of memory. I am unable to update it, and consequently cannot install any newer apps. I am very disappointed that I spent a lot of $$; now Apple wants me to spend $$ again to get a

I have an iPod Touch which I've had for almost 4 years, with 32 GB of memory. I am unable to update it, and consequently cannot install any newer apps. I am very disappointed that I spent a lot of $$; now Apple wants me to spend $$ again to get a new one. As I mentioned, I am pretty upset. Does anyone know if there's a work around?

I suspect you have a 2G iPod. Those can only go to iOS 4.2.1.
Identifying iPod models
iPod touch (3rd generation)
iPod touch (3rd generation) features a 3.5-inch (diagonal) widescreen multi-touch display and 32 GB or 64 GB flash drive. You can browse the web with Safari and watch YouTube videos with Wi-Fi. You can also search, preview, and buy songs from the iTunes Wi-Fi Music Store on iPod touch.
The iPod touch (3rd generation) can be distinguished from iPod touch (2nd generation) by looking at the back of the device. In the text below the engraving, look for the model number. iPod touch (2nd generation) is model A1288, and iPod touch (3rd generation) is model A1318.

: I have recently purchased a iBook G4 Mac OS X VERSION 10.5.6 and I cannot install any apps such as firefox, adobe reader, it reads you cannot install this file on this disk

: I have recently purchased a iBook G4 Mac OS X VERSION 10.5.6 and I cannot install any apps such as firefox, adobe reader, it reads you cannot install this file on this disk

Are you saying the iBook G4 you have is running OS X 10.5.6?
The next file to get for it would be the Combo update 10.5.8 for Leopard.
And any old archived Flash player for 10.5.8 from Adobe flash site.
A browser such as TenFourFox, iCab, SeaMonkey-PPC, these are OK
but you won't be able to go past Leopard 10.5(.8) in a PowerPC Mac.
All these are free bits, however anything past 10.5.8 Mac OS X
would require a newer Mac with Intel-based architecture. Macs
made in 2006+ can see later OS X versions.
Good luck & happy computing!

My iPad 1 cannot install any apps from apple store even though it has been updated to ios 5.1.1 which is better than 4.3 that is required by most of the apps in apple store. I reset factory settings but still to no avail I cannot install any apps.

MY iPad 1 cannot install any apps

A lot of apps have current versions that require higher iOS versions than 5.1.1
But some developers allow you to download older compatible versions of their apps. If the app is free then try downloading the current version on your computer's iTunes so that it's in your account's 'purchase' history, and then in the Purchased tab in the App Store app on your iPad see if you can download an older compatible version of the app. If the app is paid-for then try contacting the developer first and see if that will work with their app (and if they have a version compatible with iOS 5.1.1 available) - don't buy the app until you know that it will work.
There is also this page for finding current apps that require iOS 5.1.1 or lower : https://sites.google.com/site/appleclubfhs/support/advice-and-articles/finding-a pps-for-older-devices#5.1.1

Cannot install any application from new Winows market.

Cannot install any application from new Winows market. I click "Install" and... that's all... nothing more...
P.S. I am on domain network.

Hi and welcome to Apple Discussions.
Don't worry, no special etiquette, we're all friends here
What was the software that you installed that claims to "enhance the speed of your system"? The logical thing to do would be to uninstall the application and hope that it hasn't caused wider ranging problems. The SW, if only halfway reputable, should have come with uninstall instructions. Follow the instructions, reboot and see if your download problem is fixed.
WRT to the slowing down that prompted your (misguided) installation of this SW there are many things that may be the culprit but the most common and easiest to fix is the remaining space on your HD. What size is your HD and how much free space is there? This info can be obtained by selecting your HD and keying Command (Apple) + I (the letter 'eye').
Post back with the SW concerned and the remaining space and we can take it from there.
Good luck,
Adrian

Cannot install any softwares!

cannot install any softwares! everytime i try to install anything it asks for my account password,
once i enter it, thats it. nothing happens.
i upgraded it from snow leapord to lion (latest updates). I dont have a DVD to do any kind of disk repair.
please help! i need to install win7 through bootcamp.

just any software.
well the last incident was when i tried to install win7 through bootcamp. at one point it asks me to erase the win7 (as i tried to install win7 like few weeks ago). i checked the option and in the next step it asks me to retore. when i click restore, it asks for my account password. cos thats how my pro is set. everytime i intall it a software or try to make any changes it prompts for my password.
when i enter...... nothing happens. the dialog box (the password prompt box) dissapears. thats it.
no matter how many i try to d it nothing happens.
please!

Help with error cannot install any apps

can any help solve my error issue. I cannot install any apps. and apman says i have no catalogues. but i do anf i even get ! icon saying i have updates.
BusyBox v1.10.2 (Debian 3:1.10.2.legal-1osso30+0m5) built-in shell (ash)
Enter 'help' for a list of built-in commands.
~ $ sudo gainroot
Root shell enabled
BusyBox v1.10.2 (Debian 3:1.10.2.legal-1osso30+0m5) built-in shell (ash)
Enter 'help' for a list of built-in commands.
/home/user # apt-get upgrade
Reading package lists... Done
Building dependency tree
Reading state information... Done
You might want to run `apt-get -f install' to correct these.
The following packages have unmet dependencies:
mp-fremantle-community-pr: Depends: hildon-desktop (>= 1:2.2.142-11) but 1:2.2.140-1+0m5 is installed
status-area-orientationlock-applet: Depends: hildon-desktop (>= 1:2.2.142-11) but 1:2.2.140-1+0m5 is installed
E: Unmet dependencies. Try using -f.
/home/user # apt-get -f install
Reading package lists... Done
Building dependency tree
Reading state information... Done
Correcting dependencies... Done
The following packages were automatically installed and are no longer required:
python-xml python-facebook libqt4-translations
Use 'apt-get autoremove' to remove them.
The following extra packages will be installed:
hildon-desktop
The following packages will be upgraded:
hildon-desktop
1 upgraded, 0 newly installed, 0 to remove and 16 not upgraded.
6 not fully installed or removed.
Need to get 0B/235kB of archives.
After this operation, 20.5kB of additional disk space will be used.
Do you want to continue [Y/n]? y
(Reading database ... 34004 files and directories currently installed.)
Preparing to replace hildon-desktop 1:2.2.140-1+0m5 (using .../hildon-desktop_1%3a2.2.142-11_armel.deb) ...
Unpacking replacement hildon-desktop ...
dpkg: error processing /var/cache/apt/archives/hildon-desktop_1%3a2.2.142-11_armel.deb (--unpack):
trying to overwrite `/usr/share/gconf/schemas/hildon-desktop-keys.schemas', which is also in package modified-hildon-desktop
Errors were encountered while processing:
/var/cache/apt/archives/hildon-desktop_1%3a2.2.142-11_armel.deb
E: Sub-process /usr/bin/dpkg returned an error code (1)
/home/user # apt-get autoremove
Reading package lists... Done
Building dependency tree
Reading state information... Done
You might want to run `apt-get -f install' to correct these.
The following packages have unmet dependencies:
mp-fremantle-community-pr: Depends: hildon-desktop (>= 1:2.2.142-11) but 1:2.2.140-1+0m5 is installed
status-area-orientationlock-applet: Depends: hildon-desktop (>= 1:2.2.142-11) but 1:2.2.140-1+0m5 is installed
E: Unmet dependencies. Try using -f.
/home/user #
BusyBox v1.10.2 (Debian 3:1.10.2.legal-1osso30+0m5) built-in shell (ash)
Enter 'help' for a list of built-in commands.
~ $ sudo gainroot
Root shell enabled
BusyBox v1.10.2 (Debian 3:1.10.2.legal-1osso30+0m5) built-in shell (ash)
Enter 'help' for a list of built-in commands.
/home/user # apt-get upgrade
Reading package lists... Done
Building dependency tree
Reading state information... Done
You might want to run `apt-get -f install' to correct these.
The following packages have unmet dependencies:
mp-fremantle-community-pr: Depends: hildon-desktop (>= 1:2.2.142-11) but 1:2.2.140-1+0m5 is installed
status-area-orientationlock-applet: Depends: hildon-desktop (>= 1:2.2.142-11) but 1:2.2.140-1+0m5 is installed
E: Unmet dependencies. Try using -f.
/home/user # apt-get -f install
Reading package lists... Done
Building dependency tree
Reading state information... Done
Correcting dependencies... Done
The following packages were automatically installed and are no longer required:
python-xml python-facebook libqt4-translations
Use 'apt-get autoremove' to remove them.
The following extra packages will be installed:
hildon-desktop
The following packages will be upgraded:
hildon-desktop
1 upgraded, 0 newly installed, 0 to remove and 16 not upgraded.
6 not fully installed or removed.
Need to get 0B/235kB of archives.
After this operation, 20.5kB of additional disk space will be used.
Do you want to continue [Y/n]? y
(Reading database ... 34004 files and directories currently installed.)
Preparing to replace hildon-desktop 1:2.2.140-1+0m5 (using .../hildon-desktop_1%3a2.2.142-11_armel.deb) ...
Unpacking replacement hildon-desktop ...
dpkg: error processing /var/cache/apt/archives/hildon-desktop_1%3a2.2.142-11_armel.deb (--unpack):
trying to overwrite `/usr/share/gconf/schemas/hildon-desktop-keys.schemas', which is also in package modified-hildon-desktop
Errors were encountered while processing:
/var/cache/apt/archives/hildon-desktop_1%3a2.2.142-11_armel.deb
E: Sub-process /usr/bin/dpkg returned an error code (1)
/home/user # apt-get autoremove
Reading package lists... Done
Building dependency tree
Reading state information... Done
You might want to run `apt-get -f install' to correct these.
The following packages have unmet dependencies:
mp-fremantle-community-pr: Depends: hildon-desktop (>= 1:2.2.142-11) but 1:2.2.140-1+0m5 is installed
status-area-orientationlock-applet: Depends: hildon-desktop (>= 1:2.2.142-11) but 1:2.2.140-1+0m5 is installed
E: Unmet dependencies. Try using -f.
/home/user #
cheers for any assistance

k i went to maemoder and tried to remove hildon via restore (strange) then entered the commonds u gave but this is what i got
o30+0m5) built-in shell (ash)
Enter 'help' for a list of built-in commands.
~ $ root
BusyBox v1.10.2 (Debian 3:1.10.2.legal-1osso30+0m5) built-in shell (ash)
Enter 'help' for a list of built-in commands.
Nokia-N900:~# apt-get install hildon-desktop
Reading package lists... Done
Building dependency tree
Reading state information... Done
The following packages were automatically installed and are no longer required:
python-xml python-facebook libqt4-translations
Use 'apt-get autoremove' to remove them.
The following packages will be upgraded:
hildon-desktop
1 upgraded, 0 newly installed, 0 to remove and 16 not upgraded.
6 not fully installed or removed.
Need to get 0B/235kB of archives.
After this operation, 20.5kB of additional disk space will be used.
(Reading database ... 34004 files and directories currently installed.)
Preparing to replace hildon-desktop 1:2.2.140-1+0m5 (using .../hildon-desktop_1%3a2.2.142-11_armel.deb) ...
Unpacking replacement hildon-desktop ...
dpkg: error processing /var/cache/apt/archives/hildon-desktop_1%3a2.2.142-11_armel.deb (--unpack):
trying to overwrite `/usr/share/gconf/schemas/hildon-desktop-keys.schemas', which is also in package modified-hildon-desktop
Errors were encountered while processing:
/var/cache/apt/archives/hildon-desktop_1%3a2.2.142-11_armel.deb
E: Sub-process /usr/bin/dpkg returned an error code (1)
Nokia-N900:~#
why did it not work?

After upgraded my iPad 2 to new iOS7, I cannot install any apps from Apple App Store.

After upgraded my iPad (version-2) to new iOS7, I cannot install any apps from Apple App Store. Usually there is a button "Free" (or whatever the price is), then changed to "Install" after clicked on it. But that button is not available anymore.

The Complete Guide to Using the iTunes Store
http://www.ilounge.com/index.php/articles/comments/the-complete-guide-to-using-t he-itunes-store/
Can't connect to the iTunes Store
http://support.apple.com/kb/TS1368
iTunes: Advanced iTunes Store troubleshooting
http://support.apple.com/kb/TS3297
Best Fixes for ‘Cannot Connect to iTunes Store’ Errors
http://ipadinsight.com/ipad-tips-tricks/best-fixes-for-cannot-connect-to-itunes- store-errors/
Try this first - Reset the iPad by holding down on the sleep and home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider - let go of the buttons.
This works for some users. Not sure why.
Go to Settings>General>Date and Time> Set Automatically>Off. Set the date ahead by about a year.Then see if you can connect to the store.
 Cheers, Tom

I cannot install any apps on my iPhone 5 after ios8.2

I Cannot install any apps. The apps get loaded but do not install.

restart
Restart or reset your iPhone, iPad, or iPod touch - Apple Support

Windows won't install any drivers using BootCamp

I'm new to using a Mac (I bought an aluminum 2.0GHz MacBook last month). I need to run Windows on it, and tested in using BootCamp, but I cannot get the Windows XP drivers to work at all. No drivers have been installed for networking, chipset, sound, video, etc.) The device manager shows almost no drivers installed. It is Windows XP SP3 as well. I have also tested this on two other Macs, with the same results. What am I doing wrong?
Thanks in advance for any replies received.

If you have Auto-run enabled (not always a good idea though) it will still open to
/BootCamp folder with Apple Setup.exe to install the drivers and services to add compatibility.
I think Windows Update, esp. now with v. 7 RC1, it finds even 3rd party drivers for me and less trouble, something OS X doesn't provide.
But the step for inserting your DVD.... that is in the Boot Camp Guide and pdf.

Reinstalling Vista, Cannot Install Any Drivers

Similar Messages

Maybe you are looking for