ReiserFS: clm-2100: Nesting info a different FS

Hey,
I was fixing up my system after installing new RAM into it, and had to recreate the regular user and reinstall xfce4 (to the new 4.4 upgrade) and xorg (the old RAM died on me and I first thought that it might have been some software problem)
So anyway, I reinstall the programs, and then try to 'startx'. I am returned with a Call Trace list that ends with
ReiserFS: hda5: warning: clm-2100: nesting info a different FS
My /home directory is on another partition (hda6), and I did a 'reiserfsck --check' on both the root and the home partition. I'm currently typing this from a backup partition on the same computer.
I googled the error message and came up with this, but the patch involved is
(1) For kernel 2.6.11
(2) Seems to be missing some information on line 14 (there's an open bracket but I can't find a related closed bracket - I tried the patch and it didn't work).
Also, I am not using the Arch kernel since I'm not able to get that particular partition working with mkinitcpio. The backup partition is working fine with mkinitcpio, and the only difference I can see is that the backup does not use reiserfs at all. I've tried fixing this problem, but nothing's worked and I've practically given up (therefore, the custom kernel).
Accessing files on both the root and home partitions works without a hitch. This error message (and the subsequent hanging of the computer) only happens when I try to 'startx'.
I was wondering if someone could explain what this error message is about, and, if possible, provide a way to fix it.
Thanks,
Ravster

Update:
X seems not to work only for my regular user. Doing a 'startx' as boot works and I'm able to use graphical programs such as firefox.
I forgot to mention that I get some other error messages below the Reiserfs warning
/usr/bin/startx: line 134: 2929 Segmentation Fault xauth -q -f $xserverauthfile << EOF
add:$dummy . $mcookie
EOF
Doing a startxfce4 as a normal user seems to work a little bit further. The splash screen of XFCE shows up, and the mouse cursor turns into the wristwatch icon, and then the image just stays that way. The mouse is operational and I can move the cursor around. When I switch to the console again, I saw this message
xfce4-session: 2866: WARNING **: Failed to set up the ICE authentication data, session management might not work properly
Thanks,
Ravster

Similar Messages

Battery info in different language

battery info in different language

There are more than 50 different computers called MacBook Pro, with several different batteries, and Mac OS X is available in dozens of languages worldwide. Where are you seeing this information? what language does it appear to be? What language(s) do you use?
MUCH more background information will be needed for anyone to respond to your terse statement.

Contact info for different contacts is showing up in wrong contact person's fields!

Recently switched from mobileme to iCloud. Now, not only do old (formerly deleted) contacts show up on my iphone & ipad, but a lot of the contact information seems to have randomly merged with each other. So that for my contact Ash, it shows her phone number and a different contact's address and email address!
How did this happen and how can I fix this? Different info for different contacts is showing up in wrong contact person's fields! Random information is showing up all over the place, so that in order to fix it manually, I'd have to scroll one by one on my phone and then try to figure out if the random incorrect contact info still shows up for the contact it belongs to. I'd rather not have to do this!
* my iPad & iPhone have iCloud, not my macbook.

I have Verizon and I tried the *228 thing and it didn't help

Purchasing Info Record- Different Regular Vendor for different Plant

Dear Guru,
I'm encounter a problem with PIR.
I have this PIR 9001 (Vendor A) and 9002 (Vendor B) for material A, which i have extended to 2 different Pur.Org 0001 under company code 0001 and Pur.Org 0002 uner Company code 0002.
For Pur.Org 0001, i set the Regular Vendor as Vendor A, but when i trying to set the regular vendor for Pur.Org 0002 to be as Vendor B, i receved the message as "Up to now, vendor A has been regular vendor for this material".
And After i changed this Regular vendor to vendor B, this changed have also affected the PIR for Pur. Org 0001.
Can i know if there is a way to change the PIR Regular vendor at Pur.Org or Plant level?
Thank you very much,
Regards,
Chee Wee

Hi,
Regular vendor is at client level.
That's why, you cann't maintain more then one vendor (Source of supply) for the same material.
If you want to maintin separate vendor for the each plant and same material combination, then don't activate / select regular vendor option in the info record. You have to maintain source list.
Sour list is nothing but a list of source of supplies for the specific plant and material combination with in the validity period of time. If there are more then one vendor for the specific plant and material combination for the same validity period of time, then you can activate fixed vendor option in the source list. Then at the time of creating PO, SAP will pick fixed vendor for the Plant and Material combination.
So first, system will check whether regular vendor is there for this material in the info record. If is there,system will pick regular vendor in the PO. If not, then system will check fixed vendor in the source list for the material and plant combination. If yes, then system will pick fixed vendor from the source list. If not system will propose all the vendors in the source list. If the source list it self not created, then user has to give vendor number manually.
Regards
KRK

Displayed Header Info Prints Differently

The header info. that's displayed on-screen, is different than what gets printed. How do that happen?
Specifically, the displayed header info. shows; "To: My Name" but when printed that same line is changed to; "To: my email address".
I need the header and email to print the exact way it is displayed. How do I get Mail to accomplish this simple task?
Thanks,
PS - Apologies for the rude screen name. I got frustrated with the account creation hassle.

Greetings,
When printing email, the displayed name (or Smart Address if you have that enabled) will always show the name and/or the email address of the person it's To: and From:; there's no way around that.

Quality info records: different pack configurations for same raw material

how can i differentiate different pack configuration for same raw material in quality info records, as one might approved and the other not? that is, besides creating different material master for each packaging?
thanks
Alisa

You need to use the MPN profile functionality that is a standard part of SAP.
In Config under the purchasing define the MPN profile. There are several options you can turn on/off including info records.
You assign the MPN profile to your material. It now is considered by SAP to be an internal material number.
You then create a HERS material type for each separate manufacturer material number you have. You only need the purchasing view for these materials. You can also create purchasing text views, classification and some others if you wish.
In the SAP approved vendors list (AVL), you then assign each manufacturer vendor(s) with the HERS material created.
You create a Q-info record for each manufacturer/HERS material combination.
Now, when you specify the internal material number in a PO, the system will tell you to order the MPN material. When you do the drop down for the material now, it will show you the approved manufacturers allowed in the AVL for the ordering plant.
When the 01 inspection lot is created you will have a vendor number as well as a manufacturer's number in the inspection lot. The DMR can be done by the manufacturer or the vendor depending on how you set up the inspection plan. Q-info record will be used accordingly.
Take a look at it and research it. It's not hard to set up.
FF

IsTransactionDirty in nested appmodule is different then in the parrent ?

JClient in version 10.1.3 we get different result then in v9. Currently a nested app that is dirty will return true but the parrent is returning false... Is this the correct results ????

Probably my problem is not clear. I know that the recovery key is changed when it is retreived from the self-service of HelpDesk portal but this is not my problem.
When the MBAM agent offers to encrypt a removable device because the policy setting 'Deny write access to removable drives not protected by BitLocker' is enabled or when the same policy setting is not configured and we start the encryption manually by using
the context menu you first must save or print the recovery key. I checked the recovery key with the command 'manage-bde -protectors -get e:' and I use SQL management studio to search for the recovery key (or ID). When the recovery key (ID) can not be
found in the database the recovery key in the saved file is the correct one. When the recovery key (ID) can be found in the database the information initially saved in the file BEFORE encrypting the removable device is not correct anymore. Probably the
recovery key is changed when the removable device is available.
I noticed the same behaviour with manually encrypting a fixed disk. After the encryption was completed I found only one revovery key (ID) in the database for the laptop and it was the key for the Operating system drive. With the policy setting for the auto
unlock feature set to require auto unlock I noticed a second recovery key was added to the database after some time.
Can someone explain this behaviour?

Nested Sequences show different duration times

In a FCE 3.5.1 project, have a sequence (call it Sequence 1) that shows a Duration of 00:08:56;12 in the Browser. However, if I open Sequence 1 into the timeline, it is only 00:08:31;20 long.
Sequence 1 is also used within 2 other sequences. In one of them, it shows a duration of 00:08:56;12, the same as the Browser indicates. Where it is nested in the other sequence, it shows a duration of 00:08:31;20, the same as that for Sequence 1 when it is open in the Timeline. Very confusing!
The latter Duration is probably correct since that is what is indicated in the Timeline. Why does it display a different duration in Browser and in one of the Sequences within which it is nested? And what should I do about it, if anything?

If I create a new Test Sequence and drag Sequence 1 from the Browser into the Timeline and go to the end, The Canvas window shows both the Duration and the playhead position to be 00:08:56;12.
If I double-click the nested sequence, it opens showing all of its Clips and the Canvas now shows the Duration to be 00:08:56;12 but the position of the playhead (at the end) is listed as 00:08:31;20.
As far as I can determine, the only place where In & Out points are indicated for Sequences are in the Browser where 00:00:00;00 and 00:08:56;11 are shown.
Do I dare change the Out Point in the Browser to read 00:08:31;20 or will I risk screwing something up?

Error message "can't nest items with different editing timebases"

Hello final cut wiz group!
I just finished a soundtrack in Logic Pro 7 and am trying to import the XML into Final Cut 5 with my G5 (OS 10.4.1). I'm getting a message that says "30 fps, NTSC rate does not match sequence preset time base 25 fps. The timebase defined in the the XML will be used. Unable to edit clip into sequence."
I can get the sound to play after rendering, but when I try to bring the clip into the sequence, I get an error that says cannot nest items with conflicting timebases?
Anybody have an idea how I can get myself out of this problem?
Thanks for your help!
DJ

I'm not too familiar with using the XML functions but 25fps I believe is PAL and 30fps would be NTSC. That is a problem. When you export from Logic you may be able to change a frame rate setting in the export dialog. Or you could just bounce the file into a compatable format such as AIF or wave/PCM and then import that. Good luck.

Get Info sees different "Open With" for the same file on different computer

I've got a laptop (17") and a desktop, both with OSX 10.4.3. I had a disk problem with the laptop, but was able to get everything off the disk, reformat it, and put it all back. Everything's been working fine until today, when I tried to use the Equation Editor in Office. It wouldn't work. As I tried to chase down the problem, including reinstalling Office, I realized that my laptop was seeing certain Office files using GetInfo as "Open With" Netscape. I compared this with the settings on the desktop, and they were different. Different applications, different icons, even.
Then I noticed that when I have the CD in the laptop and do GetInfo on a file there, or even look at the icon, it's different from what appears when I look at the same file on the desktop. So it appears to be an OSX issue, not a Microsoft issue.
I've rebuilt permissions several times. I changed the OpenWith settings, but that didn't solve the problem. But I think it's because other Office files are being misread by the OS, too.
If anyone has a diagnosis (and hopefully, a cure), I'd really appreciate it.

Hi, Jim.
You wrote: " I realized that my laptop was seeing certain Office files using GetInfo as "Open With" Netscape."If you are seeing more than just Office documents displaying the incorrect default application, this could indicate a corrupted Launch Services cache or preferences on the affected Mac.
In associating documents with applications, Finder employs Launch Services. Launch Services employs several files to associate documents with applications and vice versa. When these files become corrupted, this can result in problems including:
- The wrong applications being launched when double-clicking a file.
- Multiple copies of a single application appearing in the Open With menu for a given document.
- Incorrect icons appearing on files, folders, or other objects.
The following steps will remove all of the files used by Launch Services. Be sure to read these instructions entirely, including the Notes, before proceeding.
1. Quit all running applications.
2. Trash the following two files in the Computer > Macintosh HD > Library > Caches folder:
- com.apple.LaunchServices-0140.csstore
- com.apple.LaunchServices-014xxx.csstore
where xxx is the uid number for the affected account in the NetInfo database. Type your Admin password when prompted to authenticate the deletion of the first file. See Notes [1] and [2].
3. Trash the com.apple.LaunchServices.plist file in your Home > Library > Preferences folder. See Note [3].
4. Restart your Mac.
5. Log in to your account.
6. Empty the Trash.
Do not empty the Trash until after you have restarted your Mac.
Notes:
[1] Step 2 will result in you being prompted to approve the launch of the application associated with a document the first time you double-click a document. These alerts are a result of the security feature in Mac OS X. The list of applications which you have previously approved are saved in the caches deleted in step 2.
[2] The first user account defined on your Mac is generally uid 501, the second uid 502, and so forth. For example, the second file ID for the first account would becom.apple.LaunchServices-014501.csstoreYou can find the uid number for any account as follows:1. Launch NetInfo Manager, which is in the Computer > Macintosh HD > Applications > Utilities folder.
2. Select users in the middle column of the NetInfo Manager window.
3. Select the desired user account in the right column of NetInfo Manager.
4. The data for the selected user, including uid, is displayed in the lower pane of the NetInfo Manager window.[3] Step 3 will reset to default values all associations you have created between specific file types and applications. For example, if you set PDFs to open in Adobe Acrobat instead of Preview, they would now open in Preview again until the association of PDFs with Acrobat is reset. You may want to skip step 3 to see if the other steps resolve the problem. However, if skipping step 3 does not resolve the problem, running steps 1-6 again, including step 3, should resolve the problem.
Note that some of the information above is from the "Applications" chapter of my book, Troubleshooting Mac® OS X, Tiger Edition.
Dr. Smoke
Author: Troubleshooting Mac® OS X
Note: The information provided in the link(s) above is freely available. However, because I own The X Lab™, a commercial Web site to which some of these links point, the Apple Discussions Terms of Use require I include the following disclosure statement with this post:
I may receive some form of compensation, financial or otherwise, from my recommendation or link.

Pageflow calling on nested pageflow in different app

I have created a login app with a pageflow. I would like to create a totally separate
app that could then call that login app if the person is logged in.
I deployed the login app to the server and can get to it fine manually (ie http:\\localhost:7001\login\Controller.jpf),
but I can not figure out for the life of me how to @jpf:forward to it from a different
application.
I hate the concept of having to squeeze everything I do into a single application.
Is this possible using the @jpf:forward? Do I have to utilize Struts?
thanks
m

hi
just try giving the path to the
@jpf:forward name="success" path="/pathToFolder/myAction.do"
and see if it works (change syntax to whicgever version you use)
Havent tried , see no reason why it should fail
regards
deepak

HD Get Info Showing Different Size After Using Disk Utility

I recently removed my second partition I used as a back up to free up some more space. I booted into the Leopard install CD and ran disk utility to delete the 2nd partition and resized my "home" partition to ~148GB and had no issues. I booted into Leopard and used "Get Info" on my "home" drive and noted it showing my HD size was only ~74GB. I used find to search for files on "This Mac" where size was greater than 500 MB and found nothing unusual. Does anyone have an idea what this issue could be?
Thanks in advance
Matt

Hi Tom,
Of course, that makes perfect sense! When I made my last disk image backup, my PowerBook had a serious, undiagnosed problem and I had booted from the startup disk to have a current backup of everything before I sent it off for repair.
Thanks for your help.
Rick

Nested lists display differently in Firefox vs IE7

Hi All, I hope you can help me out here.
I am having trouble getting nested lists to appear properly in Firefox as opposed to IE7.
The code that appears around the tex (list a, b, etc) is in the the graphic below (I could not upload the file and could not paste the code in here).
Below is a screen capture showing you the problem.
Can you please help me fix this? I need to release the project by June 19 and we really don't want to say "for optimal viewing in IE7 or higher".
If I need to do something in the .css, please be detailed in your explanation, as I am still learning!
Thanks
Deborah

Hi there
You could type the code.
You could also grab a screen shot of it and insert the screen shot. If that's what you choose, please use the Camera icon and don't attach it.
Cheers... Rick
Begin learning RoboHelp HTML 7 within the day - $24.95!
Click here for Adobe Certified Captivate and RoboHelp HTML Training
Click here for the SorcerStone Blog
Click here for RoboHelp and Captivate eBooks

Synching info from different iTunes

I have my iPhone synched with my iTunes on my laptop; but I want to get music and books off of another iTunes on a different laptop in our house. How can I do this without losing all of the songs from my iTunes? I want to be able to select certain songs to add to my iPhone. Please help!

Sorry, but you can't sync an iPhone to more than one computer. If you want content from both computers on your iPhone, you'll need copy the content from the other laptop to the one you sync your iPhone from so that it's all in that one iTunes library.
Regards.

Is there a limit on the number of Apple IDs one can have under same name and billing info (with different email addresses)?

I want to set up MANY for my employees but control the billing as a perk. Is this even possible?

Thunderbird has no limit.
See http://kb.mozillazine.org/Thunderbird_:_FAQs_:_Create_Mailing_List

ReiserFS: clm-2100: Nesting info a different FS

Similar Messages

Maybe you are looking for