Reject PO release - Some text needed

Hi all,
I am working on PO reject release strategy. When he reject he need to enter some text why he is rejected . How do i go for this scenario. When user reject the PO, I am able to send email to Workflow initiator who created PO. Please help me .
regards,
Ajay

This editors come as pop up in foreground.
Call this FM in the partcular method..where you the user is exactly rejecting the PO..
Might be in EDIT method.
Fore creating custom method..please refer this link [ LINK|http://wiki.sdn.sap.com/wiki/display/ABAP/DelegationandRedefiningmethodsofbusinessobject+BUS1001]

Similar Messages

Release Order text

When we use outline agreements ME33K for example, in "header > text > text overview", we have a text type 'release order text'. When we release a PO from the outline agreement, this used to default in the Purchase Order Header text, and would print on the PO. This no longer works since we have moved from 4.0B to 4.7. Can you advise how to correct this?

I have fixed it! Incase you have the same issue I did the following:
To fix, the 'Release Order text' needed to be an option from the contract to the PO. SPRO > Materials Management > Purchasing > Purchase Order > Texts for PO > Define text types for header text. Click on new entries, type in 00 (this is what it is set up for in the contract type), and then add in the text 'Release order text'. Then save, and this creates a transport. Then select the next option down 'Define copying rules for header texts'. Click on the 00 line and clicj the text lingage in the dialogue structure box. Click new entries, it looks as though you can't enter in the lines, but you click in each box and the drop down menu. Add in the Source Object 'Contract' and Source text 'Release order text'. Then save, creating a 2nd transport.

I need to copy and paste as I am loading content onto my website through an online user panel, I dont have the know how to start re-writing coding as the help message stated when I try to copy some text, is there a simple solution to this task?

I really need to copy and paste as I am uploading content onto my website through an online user panel, I dont have the know how to start re-writing coding as the help message stated when I try to copy some text, is there a simple solution to this everyday type task? Thanks in advance. Mark in Cheshire.

kaymarhar wrote:
Because it took me AGES to manually configure the text to wrap around my little pig friend there and I would be so bummed if I had to do it again
Next time, you can use the Text Wrap function, so you don't need to manually wrap the text.

How do I delete some text in a tag in the XML file?

I need help with removing some text inside the tags so I can use it as a XMLfile
string example
Code
<Event xmlns="http://SwitchKing.Common/Entities/RESTSimplified/2010/07" >
<Description i:nil="true"/>
So these are the tags inside the file that is stopping my work.
I cant seem to find a way to remove the xmlns.... or the i:nil...
The i:nil gives of a error when trying to read the file and the xmlns stops the search for other tags in the file.
So when I have loaded the data I need to delete some text in the tags.
Help!

If you want to delete photo stream photos, just deleted them from your device and they will be deleted from iCloud and your other devices. Be sure you don't want them as you cannot get them back once you delete them.

Fonts used in some text layers not available...

I've been gettting the following message lately when opening Photoshop files at work: "Fonts used in some text layers are not available for activation. You will need to replace these fonts before the layers can be used for vector based output".
But when I check my text layers, there are no indications that any fonts are missing. I double click on every text layer to see what font is being used and double check Suitcase Fusion to make sure it is activated.
I'm using OSX Maverick 10.9.2. I'm using Suitcase Fusion 5 version 16.2.0. And I'm using Photoshop CC 14.2.1. It's more of an annoyance than anything, but would like to know why it keeps telling me fonts are not available when they are currently activated in Suitcase. Not sure if it's an Adobe issue or a Suitcase Fusion issue.
Anyone have any ideas on this?
Thanks!
Steve

DrStrik9, I opened up the file, clicked on each text layer and selected all to make sure there wasn't any character using a different font. There wasn't. I clicked on the font being used, tried changing it to a different font, then back to the font that was being used. I saved and closed the file, then reopened it, and that seemed to cure it for that file. Not an efficient way to go about it though.
I then tried another file that was giving me the same error, clicked on each text layer, changed the font to a different one, then back to what was being used, saved, closed and reopened it, and still got the same message. So it didn't work for that one. I then tried changing the font to a system font, Times Bold true type, saved, closed, reopened, and got the message again. So not sure what is going on. The fonts used in the first file were DIN and DINEngschrift postscript font, which were loaded and active in Font Fusion.
The 2nd file I tried was using Gotham Bold postscript font, which also was active in Font Fusion. I've run Font Doctor on the fonts and found no issues.
Even though I'm getting the error message when I'm opening these files, none of the text layers have that Exclamation point indicating there is an issue with the layer, so it would seem the text layers are fine. Just really annoying to get that error every time I open the file.
Another thing I tried is I created a new Photoshop file and just made some text layers using Gotham Bold. Saved, closed and reopened the file and did not get the message. So, I don't know why I would get it with one file and not another. Very confusing/frustrating. Any other ideas?
Thanks in advance,
Steve

Why does some text convert to outlines when opening a PDF in AI?

I often have to open PDFs saved from InDesign CS5 in Illustrator CS5 (Mac). These PDFS are saved from InDesign using Press or PDFX1-a settings.
When I open them in AI, I get the warning that "to preserve appearance, some text has been outlined".
Of course, I do not want this to happen.
The text that gets outlined is nothing special. It is seemingly at random within a paragraph or within a cell of a table. In the screen shot below, live text has the blue underline; outlined text does not.
I can see no rationale for it. There is no transparency involved. Just black text on no background. There is no special "appearance" that needs to be preserved. Fonts are all Adobe OTF (Myriad Pro shown below).
Can anyone explain why this happens?

PDFs are not supposed to be edited as a rule.
Lots of odd things can happen to text (but also other objects) when you open a PDF - that is not a pdf with the editable Illustrator file saved within it - and try to edit it.
Illustrator is not a general purpose editor of pdf files.
PDF files are supposed to be an end-format, not a format that you edit.
What happens to text in a pdf when opened in Illustrator is perfectly normal. There isn't really much you can do about it except recreate the text in Illustrator from scratch, with the desired font, and re-export to the pdf-version you need.

I'm in trouble with copy paste some text from Word to DW mx 2004

I'am a new developer in webdesign. I'm doing my first site to
a cliente. I'm in trouble with copy paste some text from Word to DW
mx 2004. In the Edit / Preferences / General category i have the
spelling dictionary in Portuguese (Brasilian). If I wrote the text
in Portuguese directly from DW i can see the letters with ( ç
ã é ... ) and in the browser testing ( IE 6.0.2 with sp2
and FireFox 1.0.7 ), but with copy paste from the text in Word in
Portuguese when i bring it to DW i can see the ( ç ã
é ... ) in the beginnig but in the Browsers testing i can't,
and then after a while i lose the ( ç ã o ...). Can
anyone help me !?
I need the work finish in next monday. Thanks a lot.

Your line breaks will most likely be incorrect if you don't turn on the Japanese Composer.
It is almost absolutely impossible to accomplish your goal without having a font - any font - installed on your system that has that glyph. However, if it's showing up in Word, than means that you must have that glyph installed, right? What font are you trying to use in InDesign? You might already know that Word will auto-substitute fonts when it encounters a missing glyph, so we really don't know what font is being used to render that one glyph. The whole sentence might be in MS Mincho but one glyph might be pulled from another font if MS Mincho doesn't have that glyph.
That being said, you're going to break it if you don't know how to set Japanese type in ID. It's not something where you can just copy text out of email and paste into your English layout.

Changing Some Text in TextField

Hi everyone,
Hope everyone is doing good..
Curious if you can change only some text in a TextField rather than all of it...
Like simple example:
The Ocean has alot of water...
And make Ocean blue?
Thanks for any help -- Stan

Do you mean the text is there in one way and then changes via some actionscript, or you edit the text in a static textfield to have that one word a different color? For the latter, just do it.
To do it via actionscript you would need to use htmlText property of of a dynamic textfield to make the ocean a different color. If you wanted it to change via some actionscript from one color to another (just that word), you would have to rewrite the sentence, just add the html tags needed to color the text as desired.

How to Add Link Some Text in RichEdit Control in MFC

I need to add some Text with Link to RichEdit, thats all.
for example,
my String is,
line 1 : PASS
line 2 : FAIL
line 3 : PASS
line 4 : FAIL
line 5 : FAIL
now i want to add this String into RichEdit. and add a Link to Only FAIL text. when i click the FAIL Text(ie, line2,line4,line5) it show some message using Message Box or AfxMessageBox.

I decided to give it a go and wow it was way harder than I thought it should be. Here is what I ultimately did. (you can try playing with ITextDocument2, ITextRange2::SetURL, but I didn't get that to work like I wanted. I finally resorted to
directly injecting RTF into my RichEdit control. Here is a brief example (there is a little MFC in here to save time, but the relevant stuff is pure Win32 and the MFC is trivially convertable to Win32).
m_rich.Create(WS_VISIBLE | WS_CHILD | ES_MULTILINE, CRect(10, 10, 200, 200), this, 1000);
// TODO: Add extra initialization here
m_rich.SetWindowText(L"This is a test ");
m_rich.SetSel(-1, -1);
m_rich.SetEventMask(ENM_LINK);
std::string dataStr = R"({\rtf1{\field{\*\fldinst{ HYPERLINK http://example.com }}{\fldrslt{DisplayText}}}}.)";
std::list<char> dataList(dataStr.begin(), dataStr.end());
EDITSTREAM es = {
reinterpret_cast<DWORD_PTR>(&dataList),
0,
[](DWORD_PTR dwCookie, LPBYTE pbBuff, LONG cb, LONG *pcb) -> DWORD {
auto &list = *(reinterpret_cast<std::list<char> *>(dwCookie));
*pcb = 0;
while (*pcb < cb && !list.empty()) {
pbBuff[*pcb] = list.front();
list.pop_front();
(*pcb)++;
return 0;
auto r = m_rich.SendMessage(EM_STREAMIN, SF_RTF | SFF_SELECTION, reinterpret_cast<LPARAM>(&es));

How can I put some text on a circular shape and make it visible in a Picture?

I work with LabVIEW 5.1.1 (FDS), the Picture Control Toolkit and IMAQ 4.1.1.
I'd like to make some text to flow on a circular shape of given radius just like I can do with the most common graphic programs like CorelDraw!
How can I do?

A new overlay VI was developed to address the need to add text to an image easily.
IMAQ Overlay Text (Functions >> Vision Utilities >> Overlay).
- It is available in IMAQ Vision 6.0 (which requires LabVIEW 5.1 or greater).
It will allow you to rotate text, but it currently does not support circular shapes.

Just tried adding some text to a video (MP4) how best to optimise?

Hi,
Any suggestions on this?
I imported a short MP4 into CS6, then added some text diplaying on part of the timeline so the text fades in, displays, then fades out, all well and good.
I then re-saved it as a new MP4 I'd like to know if it is possible to optimise the file at all. (never tried any of this stuff before)
Before anyone suggests anything fancy, I ONLY have access to Photoshop CS6. So If I need other software then that is no help.
Any suggestions.
Thanks, McP

Sorry, should have been clearer.
Optimise the file size in bytes, obviously it is possible to create PSDs and other format images etc then save for web.. Does the same apply to MP4s when using PS6?
Can the size of an MP4 file be reduced in any way, subsequent to me adding extra time lines that have text in them?
And by fancy, I meant After effects and other Adobe suite progs, as mentioned I only have PS6. Never tried getting to know MP4 manipulation in PS before, so not aware of free things either..
McP

I can't send e-mail because I keep getting this error: "If you are sending a link, try adding some text to it. This helps us fight spam."

I just downloaded Firefox and have been unable to send ANY emails because of the following error:
Unable to send mail.
If you are sending a link, try adding some text to it. This helps us fight spam.

Firefox doesn't do email, it's strictly a web browser.
If you are using Firefox to access your mail, you are using "web-mail". You need to seek support from your service provider or a forum for that service.
If your problem is with Mozilla Thunderbird, let us know and we can move this thread to the Thunderbird queue. This question currently is in the Firefox queue for answers.

How to Reject RFQ (Release Strategy)

Hi,
In ME29N , we have facility to Reject / Approve a Purchase order in Release staretgy tab .... but how to reject a RFQ .
There is no option available in ME45 to Reject a RFQ, only we can release it.
Need your help
REGARDS
SHREY

hi
rejection of rfq is not possible
ru talking of calcelling or reversing the release
if yes
then in me45 select therel code then belowt that tick on cancel release
execute ,select ur po and click on cancel release
regards
kunal

My phone won't send outgoing mail. Won't send some text messages and now when it's not on wireless and only 3g the internet won't load. Help!

These are ongoing problems. I really want to go back to my android. This moring the problem was sending outgoing mail. I have done a restart. I have cleared my cookies. Some text messages I have to send twice to non-apple phones. When I'm not on wireless and I'm on 3g there is no point in even trying the internet. Very disappointed in this phone.

if your having issue with your 3G service, then you should contact your cell phone provider as they handle cellular networks.
in the mean time you can try a reset, hold down the home/power button together until you see the apple logo and then release, then wait for you phone to boot back up.

I have purchased adobe pdf pack so i can delete some text from my converted files, this will only let me add text but not delete any, please help

i have purchased adobe pdf pack so i can delete some text from my converted files, this will only let me add text but not delete any, please help

I tyhink that you need ExportPDF, Adobe ExportPDF (read only). In any case, thius may help: Cancel your membership or subscription | Acrobat.com online services

Reject PO release - Some text needed

Similar Messages

Maybe you are looking for