Rejected password for user

Hi
I am having trouble with Mail. This is my second problem in as many days. Iam assuming that they are not wholly related so have started this new thread.
See my other problem http://discussions.apple.com/thread.jspa?threadID=762561&tstart=0
As of this morning one of my email addresses (my main one) Comes up with this message...
The POP server “xxx” rejected the password for user “xxx”
Please re-enter your password, or cancel.
(I put the "xxx" by the way)
When I enter the password it is still rejected.
I have also tried deleting the account and recreating a new one. But no joy.
I have tried the same address under another user, and have no problem loging in via web mail.
Any clues?
Dual 2.7 G5 Mac OS X (10.4.8) 2.5GB RAM

A reinstall should always be used as a final last resort.
You can also delete the keychain entries for this account (with the Mail.app quit)and when re-launching and prompted by the Mail.app for the account's password, save what will amount to a new entry in your keychain for this account.
In addition, check this link for system troubleshooting procedures and when doing so, follow all steps/instructions in the order provided.
http://www.thexlab.com/faqs/repairprocess.html

Similar Messages

The IMAP server ... rejected the password for user ...

When I went to bed last night, Apple Mail (Lion, MacBook Pro) worked fine on my home IMAP server, as they have done for some time.
This morning, I cannot log in and I now get the following error message:
The IMAP server “...” rejected the password for user “...”.
The password is definitely correct. I have typed in the password repeatedly (although it was already correct) to no avail - I just get the same error message again.
Since then, I have tried:
my Linux laptop using Thunderbird
my Xoom (running Android ICS) and K9
my SGS2 (running Honeycomb) and K9
my iPad 2 using IOS Mail
Roundcube (webmail client) on the MacBook Pro itself (so no connectivity issues)
and all still work perfectly. There have been no changes to my mail server (which is Dovecot running on Debian Squeeze, which has been running flawlessly for years) and none to my MacBook Pro (unless they were silent).
I have tried deleting all the relevant items from my keychain, but that has made no difference either.
Any ideas because I'm stumped?

Since I posted this, there has been more, but slightly different, weirdness.
In the middle of a session yesterday, Apple Mail started to do something different. When I typed in the password, it briefly worked (downloading one or two messages) and then the error dialogue box popped up again so clearly the password was always correct.
A short while later, it accepted the password and stopped complaining until ten minutes ago. This time I only had to type in the password once and it is working at the moment but who knows how long for?

The POP server rejected the password for user

Hi Im new to this forum but need help! I can usually fix most things on my mac but the last 2 weeks mail will not recieve any incoming messages as is just says "The POP server “mailin.macmail.com” rejected the password for user “****”
I have looked at other postings and tried keychain etc but nothing will work. This happens with 2 accounts one from macmail and one from NTL (my ISP) I can send mail fine (no password) and can go on to webmail and get my messeages fine on both accounts.
Does anyone have an answer for this?
Many thanks

Sorry I can't be of help, I know of others with this problem. In my case I have two accounts that don't work in Mail whilst the other accounts do. I suspect it may be a bug as I've been looking for a solution for sometime. My current solution is to collect the mail on those accounts with an XP netbook which is probably not very helpful!
I have also tried the Keychain repair and at least for a short while it looked as if it had fixed it.
Any ideas anybody before I go through the hassle of reinstalling everything?
D

Mail: The POP server rejected the password for user

I am completely unable to use Mail.
I keep getting the "The POP server rejected the password for user" on two of my accounts.
The password has not changed and I have entered it correctly.
The accounts just will not go online.
This started yesterday when an old machine accidentally fired up mail and tried to connect using the same user details. Since then, my MacBook Pro is not able to connect to my mail.
My iPad and my iPhone can. There is no problem at the server or the ISP. I have also run the Keychain repair utility.
Please can you advise how I should fix it? Plist? Define the accounts again?
Any ideas welcome.
Thanks

Sorry I can't be of help, I know of others with this problem. In my case I have two accounts that don't work in Mail whilst the other accounts do. I suspect it may be a bug as I've been looking for a solution for sometime. My current solution is to collect the mail on those accounts with an XP netbook which is probably not very helpful!
I have also tried the Keychain repair and at least for a short while it looked as if it had fixed it.
Any ideas anybody before I go through the hassle of reinstalling everything?
D

Rejected password for mail account...

Hello.
How can I remedy this ongoing issue of the Mail program asking for the password multiple times per week? (quite often, I'll have to enter it 20 times in the course of 5 minutes for it to actually get accepted).
I'm amazed that this hasn't been fixed yet, but until that happens, how can I temporarily remedy it?
This is the prompt that I get:
The POP server “mail.comcast.net” rejected the password for user “alexguitar1”
Please re-enter your password, or cancel.
thank you.

Check out your Keychain Access (Applications > Utilities > Keychain Access). Two things you can do:
1. check whether you have two or more keychains for your email account - ideally you should have one per mailbox. Delete any extra ones you don't need (check that the password of the remaining one is correct).
2. Still in Keychain Access, select the Keychain Access menu and choose "Keychain First Aid". You cna verify and repair any Keychain problems here.

Smtp server rejects password for outgoing mail

I can receive, but not send messages from my imac and get the message the SMTP server "smtp.tiscali.co.uk" rejected the password for user ".........".
This has just suddenly started happening. I enter what I know to be the password but it is rejected, so I have to send via webmail (now talktalk, not tiscali) or iphone. I have looked on here before and tried re-entering password/changing the port but to no avail. Flummoxed.

Hello, Fifietta.
Thank you for visiting Apple Support Communities.
Here is an article that will walk you through some troubleshooting steps that may help with this issue.
OS X Mail: Troubleshooting sending and receiving email messages
http://support.apple.com/kb/ts3276
Cheers,
Jason H.

Steps to find the password for users as sysdba

What are the steps to find the password for users in dba_users as sysdba?
It is in encrypted form ? How can I view it ?
Pls tell in steps ?

I asked for sysdba
When he can change password why can't he view ?Can you see the users password on a windows domain? No
Can you see the users password on a Unix box? No
Can you see the users password on a mail server? No
Why would it be different in Oracle?
Why is hacking coming here ?Because it's something against the way the software works.
This can, and is, dangerous to let the administrator (Oracle, MsSQL, Win*, Unix,...) know the users password for so many reasons. For example:
. Privacy
. Etiquette
. Password reuse (password reused for Bank account, etc)
. [insert a whole bunch of other good reasons I'm not going to bother writing]
And anyway it is useless!
Yoann.

I connect my Macbook 13" to my thunderbolt to display on my HD television but it keeps asking for a KeyChain password for "user-hp". My key keychain password is nothing but it does not want to accept and not display my screen to the Television. Suggestion

I connect my Macbook 13" to my thunderbolt to display on my HD television but it keeps asking for a KeyChain password for "user-hp". My key keychain password is nothing but it does not want to accept and not display my screen to the Television. Suggestion

Apple support article:
Mail Keeps Asking for Password
Maybe this will help. If you monitor the "More Like This" box (top right), other threads appear. Opening them usually displays other threads.
https://discussions.apple.com/message/20549403#20549403

Error msg: Sending of password for user did not succeed. Mail server responded: Not enough disk space - what's the deal?

I've been checking my email via webmail for a week and am back in the office today. Fired up Thunderbird, expecting it to pick up all my email, but it gets nothing and tells me…
Sending of password for user [email protected] did not succeed. Mail server pop.ipower.com responded: Not enough disk space
Haven't seen this particular error message come up in searches via google and at mozilla. There's definitely disk space on my machine. I'm running TB on a Mac (OSX 10.6.8). Disk Space options under Preferences > Advanced let me assign up to 1024 mb for the cache, which I've done, and cleared.
Has anyone encountered this before? Got a solve/troubleshooting process? Thanks!

Thanks. I do compact regularly (TB prompts me to) and did it (several times) via Preferences today to try and get TB past this error message.
Also went thru and Trashed + Empty Trashed as many messages as possible from the inbox, just in case. Still no-go.

Incorrect password for user account SLDDSUSERSMD (USER_OR_PASSWORD_INCORREC

Hello
I am installing Java add In in Solution manager 4.0, Central Instance. The process stops in this step:
Mar 12, 2007 10:56:58... Info: User management tool (com.sap.security.tools.UserCheck) called for action "checkCreate"
Mar 12, 2007 10:56:58... Info: Connected to backend system SMD client 200 as user DDIC
Mar 12, 2007 10:57:02... Info: Called for user SLDDSUSERSMD
Mar 12, 2007 10:57:05... Info: Formal password check successful
Mar 12, 2007 10:57:05... Info: Will create user SLDDSUSERSMD
Mar 12, 2007 10:58:52... Info: Created user SLDDSUSERSMD of type A with reference user <none>
Mar 12, 2007 10:58:52... Info: Verification of status for user SLDDSUSERSMD
Mar 12, 2007 10:58:52... Info: User SLDDSUSERSMD exists
Mar 12, 2007 10:58:53... Error: Verification of status for user SLDDSUSERSMD failed. Task not successfully executed. Details following.
Mar 12, 2007 10:58:53... Warning: Error during creation of user SLDDSUSERSMD. Will remove user again to ensure clean exit state
Mar 12, 2007 10:59:44... Error: Exception during execution of the operation
Mar 12, 2007 10:59:44... Error: Exception during execution of the operation
[EXCEPTION]
com.sap.security.tools.UserCheck$UserLogonException: Incorrect password for user account SLDDSUSERSMD (USER_OR_PASSWORD_INCORRECT)
     at com.sap.security.tools.UserCheck.checkUser(UserCheck.java:833)
     at com.sap.security.tools.UserCheck.createUser(UserCheck.java:1904)
     at com.sap.security.tools.UserCheck.main(UserCheck.java:289)
     at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
     at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
     at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
     at java.lang.reflect.Method.invoke(Method.java:324)
     at com.sap.engine.offline.OfflineToolStart.main(OfflineToolStart.java:81)
Mar 12, 2007 10:59:44... Info: Leaving with return code 2
Reserved 1610612736 (0x60000000) bytes before loading DLLs.
INFO       2007-03-12 10:59:45 [synxcfile.cpp:177]
           CSyFileImpl::remove()
Removing file C:\Program Files\sapinst_instdir\SOLMAN\LM\AS-JAVA\ADDIN\ORA\CENTRAL\CI\dev_UserCheck.
TRACE      [iaxxejsexp.cpp:188]
           EJS_Installer::writeTraceToLogBook()
NWException thrown: nw.ume.userError:
Incorrect password for user account SLDDSUSERSMD (USER_OR_PASSWORD_INCORRECT)
ERROR      2007-03-12 10:59:45
           CJSlibModule::writeError_impl()
CJS-30196 Incorrect password for user account SLDDSUSERSMD (USER_OR_PASSWORD_INCORRECT)
TRACE      [iaxxejsbas.hpp:460]
           EJS_Base::dispatchFunctionCall()
JS Callback has thrown unknown exception. Rethrowing.
ERROR      2007-03-12 10:59:45
FCO-00011 The step createSLDDSUser with step key |NW_Addin_CI|ind|ind|ind|ind|0|0|SAP_Software_Features_Configuration|ind|ind|ind|ind|12|0|NW_Usage_Types_Configuration_AS|ind|ind|ind|ind|0|0|NW_CONFIG_SLD|ind|ind|ind|ind|0|0|createSLDDSUser was executed with status ERROR .
User doesnt exist in SU01 - I cannot find it. When I try to create it manually, I have the same error
Some help?
Thanks in advanced

At the end I have created the user
Thanks

How to reset password for user sap*

Hi friends,
How to reset password for user sap* if any solution please mail me.
Thanks,
Yogesh

Hi,
<b><u>Steps for Reset SAP* Password</u></b>
If you forgot or lock "Administrator or J2EE_ADMIN" password just follow below steps:
STEP-1: Enable "SAP*"
1.Start the Config Tool C:\usr\sap\<SID>\<engine-instance>\j2ee\configtool\configtool.bat
Ex: D:\usr\sap\F02\JC00\j2ee\configtool --> configtool.bat
2.Goto cluster-data --> Global server configuration --> services --> com.sap.security.core.ume.service
3.Double-click on the property "ume.superadmin.activated = TRUE"
4.Double-click on the property "ume.superadmin.password=<Enter any password ex: abc123>"
5.Save.
6.Restart the engine.
STEP-2: Login with "SAP*" into portal
1. http://<host>:<Port>/useradmin/index.jsp
2. Enter userid / password as" SAP* / <password ex: abc123>"
3. Search for "Administrator" user
4. Reset or change password for "Administrtor"
STEP-3: Disable "SAP*"
1.Start the Config Tool C:\usr\sap\<SID>\<engine-instance>\j2ee\configtool\configtool.bat
Ex: D:\usr\sap\F02\JC00\j2ee\configtool --> configtool.bat
2.Goto cluster-data --> Global server configuration --> services --> com.sap.security.core.ume.service
3.Double-click on the property "ume.superadmin.activated = FALSE"
4.Save.
5. Restart the engine.
STEP-4: Login with "Administrator"
1. http://<host>:<Port>/useradmin/index.jsp
2. Enter userid / Password as "Administrator / <password>
3. it will ask change password just change it.
Please follow steps one by one. it should resolve your issue.
Thanks,
Nagaraju Parlapalli

RemoteExceptionError:Wrong Password for user

Hi All,
I have installed Oracle 10g on Windows XP. I created a database called orcl1 using DBCA and set the sys and system user passwords as "oracle". My windows xp operating system password is set as username:Bobby and password :welcome4all.
Yet at the startup/shutdown page in Enterprise Manager, when I enter HOST CREDENTIALS as username:Bobby,password :welcome4all
and credentials for target database as username:sys,password :oracle, I get RemoteOperationException:ERROR: WRONG PASSWORD FOR USER .
I don't understand why? Am I doing something wrong?
Please Help!
Thanks

See this thread:
Operating system user for Host cridentials

Password for user admin

Hello,
I have to change the PW for user admin and tried to do this in the ERP/SU01 on every client.
The connection to XI was lost. The error 'can not read exchange profile' occurred.
I reset the password of user admin in all clients to default and entered the user admin and password in the http://<xi-host>:<j2ee-port>/exchangeProfile.
This worked fine.
But now I get the periodic error that user admin on client 200 is locked due to wrong logon and XI does not work. Error as described above
Okay. I can unlock user admin, but the error occurs periodically.
Is there a description how to change the PW for user admin and get rid of this error. I found a SAP Note (936093), is this the way to do it?
I assume user admin is locked every time the portal fails to contact XI, but I am not sure.
Best Regards
Maximilian

Try reflashing the firmware and see if that alleviates the issue. If not call into 866-606-1866 for further troubleshooting.

How can i use exisitng user data(Id, password) for user mapping

Hi All,
For User mapping , we can import user mapping data for many users from user administration. and for each user
we can maintain mapping data in the standard format.
eg:
[User]
uid=user2
$usermapping$:BCE:user=ext_user2
$usermapping$:BCE:mappedpassword=password
i am clear till this point.
this all works if we know the userid and passowrd on the system 'BCE'.the passwords on the system 'BCE', are encrypted . so there is no chance for me to know the passwords.
so how can i use the existed userid/passowrd on the system 'BCE' for the mapped user and mapped password on the portal while doing usermapping.
Thanks in Advance,
Lakshmi

Hi,
I think this should work.
1. Setup SSO with SAP logon tickets first. How to do this is described many places, e.g. http://help.sap.com/saphelp_nw04/helpdata/en/d3/41c8ecb31d11d5993800508b6b8b11/content.htm
This SSO will not work at first, because the username is different in the back-end system. So what you need to do is to get the back-end username into the ticket (don't need a password because that is done by the SAP logon ticket)
2. Create a portal component which uses the usermanagement API to create a usermapping which only consists of the username and a blank password. You can do this manually I think if you have no reference system defined.
IUserMappingService umap =(IUserMappingService)PortalRuntime.getRuntimeResources().getService(IUserMappingService.KEY);
//this is the currently logged in user. You might another user
IUserContext user = request.getUser();
//Get the existing data (think it can be null)
IUserMappingData userMapping=umap.getMappingData(systemAlias, user);
HashMap map = new HashMap();
                         map.put(IUserMappingService.UMAP_KEY_USER, backEndUserName);
//add blank password               map.put(IUserMappingService.UMAP_KEY_PASSWORD, "");
//store the values                    userMapping.storeLogonData(map);
Voila, this should allow you to do SSO using SAP logon tickets, but with another name that you use against the portal. I am uncertain if this will work if you have multiple usermappings in the sap logon ticket
PS since the sap logon ticket is issued at logon time, you need to relogon to get the changes done by the code
Regards
Dagfinn

Changing Password for Users

Hi All,
I am using External Table Authentication for my users.I have created users along with their password in the database table.The problem arises
when I am trying to change the password for the users in "My Account" page of the Presentation Services.I am getting an error like
"The Oracle BI Server encountered an unknown error while attempting to change your password".
Please can anyone help me to get out of this problem.It's quite urgent.
Thank you in Advance..

This is a bug in the 10.1.3.2 version,I believe. It is fixed in later versions
Thanks

Rejected password for user

Similar Messages

Maybe you are looking for