Rejected Quotation Should not appear in Drop Down List

Dear All,
While Making PO With Reference to RFQ.
In ME21N while selecting Rejected Quotation should not come in Drop Down List
Only Those RFQ with Accepted should come
Regards
Amey

Can it be done in Standard Tcode.
Are there any customisation for it
Regards
Amey

Similar Messages

ODBC driver does not appear in drop down list

We created a system DSN using Unix ODBCConfig and the drivers
supplied by IBM in its iSeries Access package. We are trying to
connect to our AS400. We now have Coldfusion installed on SuSe 9.3
Open Enterprise Server. Coldfusion runs fine. When we try to add a
data source in the ColdFusion administrator, the system DSN driver
that we configured does no show up in the drop down list. Did we
miss a step? We have done this succesfully with coldfusion on
Windows 2003 server.

What version of ColdFusion are you running? I know with MX 7,
your individual DSNs may not be listed, ODBC or otherwise, only the
driver types. You are prompted to provide a valid Data Source name,
then to select a valid driver type, which in your case would be
ODBC Socket.
Phil

Created a new folder in bookmarks; when try to add new bookmark, new folder does not appear in drop down menu; using safari for windows

created a new folder in bookmarks; when try to add new bookmark, new folder does not appear in drop down menu; using safari for windows

You are using an older version of firefox, upgrade your browser to Firefox 8 and try
* getfirefox.com

My area is not on the drop-down list?

just applied for skype number but my area is not on the drop-down list can't get any further until I choose something from the list, what do I do, just pick the nearest area?
Post transferred to create its own new thread (topic);
subject/title edited accordingly.

Hi, ladyfromllan, and welcome to the Community,
Yes, you are correct: you would need to choose a Skype Number nearest where you ultimately wished to have your Skype Number located. Ultimately, the number would be best situated so that those who call it the most would not incur toll charges; however, that said, Skype Numbers are not available absolutely everywhere for several legitimate reasons.
Regards,
Elaine
Was your question answered? Please click on the Accept as a Solution link so everyone can quickly find what works! Like a post or want to say, "Thank You" - ?? Click on the Kudos button!
Trustworthy information: Brian Krebs: 3 Basic Rules for Online Safety and Consumer Reports: Guide to Internet Security Online Safety Tip: Change your passwords often!

I wish to reinstall Adobe Creative Suite 6 Design Standard on a replacement PC using the original box CD and Serial Number. Website says SN is valid but cannot find corresponding Adobe product. My product is not on the drop down list offered. hat do I d

I wish to reinstall Adobe Creative Suite 6 Design Standard on a replacement PC using the original box CD and Serial Number. Website says SN is valid but cannot find corresponding Adobe product. My product is not on the drop down list offered. What do I do next?

Contact support by web chat.
Mylenium

Domain Names Not Appearing In Drop Down of Data Cleansing Task

For some reason, in several of my DQS data cleansing tasks, the domain names of the knowledge base I choose are not appearing. This is turn leads to an error message stating that "No domain field has been mapped to the input column...".
The task can see the DQS server and it can see the various knowledge bases on that server, but the domains are not appearing.
Has anyone else run into this issue?
Thanks!!
A. M. Robinson

I have just found the same issue.
For me, I believe it is because the domains are only used in matching rules, which the SSIS task does not support. Therefore they are not in the drop down as the SSIS DQS task cannot use them. Only map domains for data correction and you should be ok.

Children not appearing in drop down of dimension in multiple hierachy

Hello,
In 4.2 we had parenth1 and parenth2 and one dimension table (at least I think). If parenth2 had multiple layers of children (children that were parents) you saw them in the drop down lists of the dimension for the second hierarchy. In 5.1 it appears the architecture changed with dimensions and multiplie heirarchies. I do not see children of children in my alternate hierarchies as before. In looking in the dim"dimensionName"_H2 table I see the correct information. The data seems to be in the tables but drop down lists for the dimension are not showing children of children if this makes sense.
Ex.in 5.1 I'm expecting to see in Hierarchy2 09 -> Child 099 ->Grandchild 0991
but I'm only seeing Hierachy2 09 -> Child 099
The Grandchild 0991does not appear. (Grandchild if you will of Hierarchy2)
In Hierachy1 of the same dimension (or what use to be Parenth1 in 4.2) you see all parents and their children and children of their children etc. Note: this dimension is built using a dimension build ssis pkg.
I know my explanation is probably wordy and confusing but hopefully someone can make sense out of it. Any feedback, would be greatly appreciated!
Vikki

Hi Vikki,
The way the memberselector shows the hierarchies to end-users is not changed from V4 to V5, so I think there might be something wrong in your dimension.
Please try to copy the contents of the mbr<dimname> table to you membersheet to see more clearly what is going wrong, also try to process it from there (it will give you more hints compared to using a ssis package to import a dimension.
Another idea is to look to Apshell, some dimension have multiple hierarchies, you could compare them to your own to see what is wrong.
Alwin

LMS 4.2.3 variable name not show in drop-down list

Hi all,
I am trying to use performance threshold to trigger a script whild device CPU or Memory high.
There is a default threshold template called "CPU Utilization" and "Memory Utilization".
After I choose either one, there should be one or two variable name in drop down list.
But I only see "Select MIB Variable" in the list.
I try to create a template with exact the same variable but still got nothing in the list.
The strange thing is that no all the default template has this problem.
I can see variable name under some template like "Device Availability" or "Port Availability"
And this is not browser problem because I try both IE and Firefox.
Any one how to solve this?

Thanks for your advice.
Now all my devices are connected in Layer View [Devices View], but User Tracking still not shows me informations from several switches about hosts. Its works like randomizer. Now 5 devices form User Tracking don't show me informations.[WS3550 2 devices and 2 WS-C2960S-48LPS-L]. In lists devices Acquisition Action i check acquisition for this 5 devices. After that acquisition complete, but User Tracking still empty ( all ports on this devices are active).
SNMP, Credentials all is good.
I try resolve this problem many days, but without results. Its semmes like a bug.
ANy propositions?

HCM Processes & Forms: Field not updating after Drop Down list selection

Hello all,
I am having a problem that I think happens a lot, but I can't solve it through all the examples given here.
I have a Drop Down List where I change the value. On the CHANGE event, I have:
xfa.record.CONTROL_PARAM.ISR_EVENT.value = "GET_ORGINFO";
ContainerFoundation_JS.SendMessageToContainer(event.target, "submit", "", "", "", "");
I have defined a User Event called GET_ORGINFO. It gets triggered fine. It moves into my generic service that I defined, and it changes the value that I want to change.
When I look at the PDF, the value is still in it's old value. So, after reading some blogs, which specifically says, if something goes wrong in one service (I have 3: my own, SAP_PA and S_MGRS_POSITIONS), they all fail. I debugged and checked, and, after some changes, nothing goes wrong anymore, nothing that I can see anyway.
So what I do see, is that there's a call made like this:
CALL METHOD me->process_data_container
    EXPORTING
      ref_to_data_container = ref_to_relevant_data_container
      operation             = c_do_operations
      message_handler       = dummy_message_handler
      no_auth_check         = no_auth_check
    IMPORTING
      is_ok                 = operation_ok.
Within this method, my new value is listed (in the table VALUES_OF_FIELDS). After this call is made, so when it exists the method process_data_container, the old values are back in VALUES_OF_FIELDS.
So, at the last moment INSIDE the method, the values are correct, as soon as it steps out of this method, the old values are back.
Does anyone have any idea? Am I doing something wrong with regards to the User Events? I am on EnhP 04.
Gr,
Jaron Frenk

Hey Chris,
Unfortunately, that's not it. I did check the fields I need. Everything is going ok. As in, I get the fields (with their current values) in my own generic operation. I see everything updated the way it should. But then at the end, nothing happens...
What exactly do you mean by " then make sure your own generic service has it's input/output defined correctly". What input/output do you mean? I assume the generic service itself is okay, since it works with the user event "USER_EVENT_CHECK". And it sure is possible I am forgetting something in the definition of the user event, but I can't figure out what.
A small addition*
I just checked by user event. I have 3 fields selected:
I0001_PERSG
I0001_PERSG_TXT
I0001_PERSK
The generic service should get the PERSG and PERSG_TXT based on the PERSK that is entered. I don't think I need anything more.
Gr,
Jaron
Edited by: J. Frenk on Apr 26, 2010 9:01 AM

Lotus Notes Missing in Drop Down List for Calendar Synch

Hello there,
   A) I am attempting to synch my blackberry tour with my calendar in Lotus Notes 8.5.2. I was able to previously synch my calendar when I had Lotus Notes 8.5.1, but since our upgrade to 8.5.2, I get an error saying it could not find a supported version of Lotus Notes.
B) When I try to go in and configure the organizer section of the desktop software, there is no option for the drop down list for Lotus Notes. I have tried uninstalling, rebooting and then reinstalling (based on info from other posts), but none of that seems to work. I have checked and all the connectors are there, but for some reason, they are not being recognized. Is there some specific key or file that intellisynch is looking for to know that Lotus Notes is installed on the machine?
Now, I am assuming A&B are symptoms of a common problem, but I am at a loss as to how to move forward. Any ideas on how I can get this software to recognize Lotus Notes? I appreciate any help you can give.
Thanks,
Rick

While calling method SET_TABLE_FOR_FIRST_DISPLAY pass 'A' to paramater I_SAVE .
CALL METHOD grid1->set_table_for_first_display
      EXPORTING i_structure_name = 'SFLIGHT'
                is_variant       = gs_layout
                i_save           = 'A'
                i_default        = p_def
      CHANGING it_outtab        = gt_sflight.

TextBox does not update when drop down list selection changes

I have drop down list the user can select a client name from. Once the client is selected and the "view report" button is clicked it the report has a textbox that displays the Client name or it is supposed too.
The report will display the first client name but any subsequent client name does not display on the first. I am pretty sure that is because I have chosen the "Dataset" where the both the "values' have "first" in front of the field.
How do I get the textbox to update to match as each client is chosen from the drop down list? I cannot use the report "parameter" I am passing to the stored procedure because the drop down list's parameter is the database name not the client
name.
Any help is appreciated.
Thanks,
Sue

Okay, sorry but I am just getting back to my report. I still cannot display the Client Name in a text box at the top of my report. The textbox must be dynamic because my client name can be one of many that is picked from a drop down list box.
I added a textbox and tried to use the "join" with my Parameter - clientname.
In the textbox expression I used the following:
=JOIN(First(Fields!ClientName.Value,
"GetDatabaseName"),",")
I got this error message:
[rsRuntimeErrorInExpression] The Value expression for the textrun Textbox1.Paragraphs[0].TextRuns[0] contains an error: Overload resolution failed because no Public 'Join' can be called with these arguments:
    'Public Shared Function Join(SourceArray As String(), [Delimiter As String = ]) As String':
        Argument matching parameter 'SourceArray' cannot convert from 'String' to 'String()'.
    'Public Shared Function Join(SourceArray As System.Object(), [Delimiter As String = ]) As String':
        Argument matching parameter 'SourceArray' cannot convert from 'String' to 'Object()'.
Preview complete -- 0 errors, 1 warnings
I also tried setting up a "filter" on the clientname using these instructions
Right-click the dataset (GetDatabaseName) to open the Dataset Properties.
Click Filters in the left pane, add a filter like below:
Expression:[DBName]
Operator: In(multiple-parameter) or =(signal-parameter)
Value:[@DBName]
I get an error message too which I am not even going to display.
I can set it up and run it as long as I don't want to change the value in the "textbox" to match the value in the drop down list. I am totally frustrated at this point. Why won't it work?
Simply put - I want the value selected in my drop down list box to match the value in my textbox at the top of my report if drop down list says "Susie" then I want "Susie" in my textbox or if drop down changes to "Bobby" then I want Bobby to show up in my
textbox when I generate my report.
Any suggestions of what else I may need to try?
Thanks for the help.
Sue
Sue

My country ( EGYPT ) is not on the drop down list for the FaceTime app ?

While trying to use the FaceTime app.on my iPad I was asked to identify my region I did not find my country EGYPT on the drop down list of all countries .
What shall I do ?
pls. Help...
Thank you .

We are users. Contact Apple.

Adapter Engine NOT in the drop-down list - RFC adapter, Communication Chan

Hello XI Experts,
I recently installed IDES (ERP2005) along with XI (NW2004s). I carried out the post installation steps for XI. I set up XI (technical systems, business systems, etc).
I have started to create an RFC to File XI interface. I have carried out the necessary steps in the Integration Repository and am now setting up the scenario, etc in the Integration Directory.
I have reached the stage of creating the communication channel of type RFC for the sender system. However, when I do this, the adapter engine is empty i.e. there are no possible entries in the drop-down list. I was expecting to see "Integration Server" as a possible entry.
Could someone advise me on what I may have missed which leads to this problem?
Thanks and regards,
Nicholas.

Hi,
You have to get the SWCV from SAP market place.
Support Packages and Patches -> SAP NetWeaver -> SAP NETWEAVER -> SAP NETWEAVER 2004S -> Entry by Component -> Content PI/XI
XI CONTENT SAP_BASIS 7.00 / 6.40
You have to upload the file in the Integration repository
Best regards
Omar

Sql agent Operator not appearing in drop down box for job mail notification

I have created a new sql agent operator but operator is not appearing in the drop down box when setting up email notification for job failure?
SQL server 2008 r2
windows server 2008 r2
*Resolved deleted the existing job and recreated and then new operator was available in the dropdown box

Hi ghw,
Thanks for your post and glad to hear that the issue is resolved. Thanks for you posting your solution. That way, other community members could benefit from your sharing.
Regards,
Sofiya Li
Sofiya Li
TechNet Community Support

Quick Cluster no longer appears in drop down lists

I haven't changed any settings, one day my cluster just disappears off all the lists it used to appear in (selecting which cluster to use in Compressor, Compressor Droplets and Shake)
Now all that shows is "My Computer".
The QuickCluster wasn't anything special, it was just a local cluster with 16 instances (all on my own computer) to take advantage of the many cores in my machine, unlike My Computer which runs a single thread and uses only an eighth of my available processing power.
Reinstall? Something backend? Force Refresh somewhere I'm unfamiliar with?
I've had my fair share of Qmaster/Compressor problems in the past, but this time I'm not having any trouble finding my cluster in Qadministrator, my Qmaster System Prefs aren't greyed out or anything, the only thing I can think of is my recent update to 10.6.3, but I can't be sure that was the trigger.

Do you have any issue with just creating a regular cluster? instead of a quick cluster? it's not hard and much more reliable. Follow the steps below (this was originally written for multiple computers so if something references multiple computers, sorry- I did my best to edit my previous post to somebody else)
Stop All services in the Qmaster Prefs window.
Under the "setup" tab, Click the middle Bubble "Services and cluster controller". In the "services" section next to compressor check both "share" and "managed" boxes. Options for selected services, click and set as high (or low) as you want. More = Faster, Less = slower but sometimes more stable depending on your RAM.
In the advanced tab, delete files older than : 7 days should suffice unless space is a problem. make it smaller.
Reset the services by holding option and clicking the "start services" and then hit ok on drop-down warning that will show up. Release option and click "Start Sharing".
Open "Apple Qadministrator". On the upper-left field are the actual Clusters (shouldn't be anything there). click the "+" symbol and create a cluster, Name it whatever you want. On the lower field (Qmaster Service Browser, May be hidden, just click the grey triangle to the left to drop down the field) there should be a list of the computers you have available to cluster. Click on the cluster you just created, Select all the computer in the Qmaster Service browser, and drag it into the upper right field, anywhere in the rectangle. The outer edge should highlight with a thick black bar. release and the computer should move into that field and out of the Qmaster Services Browser.
Click on the "Controller" drop-down menu and Select the controller. When you hit Apply, the "Storage:" Field (directly under the "Controller" drop-down box) should change to reflect the storage location you set in the Qmaster Preferences. When you do this, you have created a cluster.
When you send out of compressor - make sure you are either sending Quick time reference files (you shouldn't have any issues with that) or quicktime self-contained files.
You CANNOT "Export to compressor..." from final cut. You CANNOT have your timeline open and do the usual "file>export>using compressor...". You MUST export a QuickTime reference (faster by only using render referenced files. THE TIMELINES MUST BE FULLY RENDERED, option+R instead of Cmd+R) or QT Self-Contained File (slower but more reliable as every frame is rendered. This can triple your time).
It's an extra step up front, but the transcoding time is SIGNIFICANTLY faster - and you can continue working in final Cut on other projects.
Let me know if you need further assistance.

Rejected Quotation Should not appear in Drop Down List

Similar Messages

Maybe you are looking for