Rejected record message from Essbase Studio load (3355)

I receive the following error when deploying an outline via Essbase Studio to an ASO cube (ver 11.1.2):
\\Record #36798 - Member XXX does not exist. Reference member column types require the field to be an existing member (3355)
As I read the error (BTW, can someone help me find the table of rejected record codes?), it is rejecting the assignment of an attribute to a member because the member does not exist.
What could be a reason though that I did not receive an "Error adding member XXX" rejection beforehand or something indicating that there was an error adding the member originally? I am puzzled because I cannot find anything special about the source data when comparing to the many others that loaded successfullly.

Hi All,
Towards this error if we are talking about Hyperion Essbase - Version 11.1.2.1.000 and later.
So mostly we are facing this issue has been verified as unpublished Bug 12967639.
As documented in KM:
Unable to Save ASO Outline After Renaming Members, "Error(1007072) Member [xxx] tagged as <REFER does not have a member to refer to" [ID 1465850.1]
Also towards ASO there is another document having all there as:
Oracle Hyperion Essbase and Aggregate Storage (ASO) [ID 1291202.1]
Thanks,
Shaker

Similar Messages

  • Deploying Cube from Essbase Studio

    Hi,
    I am fresher and I am a student and I am trying to study Oracle Hyperion Essbase Studio. I have a problem when I am trying to Build outline and load data from Essbase studio ->Cube Deployment option.
    Failed to deploy Essbase cube.
    Caused by: Cannot end incremental build. Essbase Error(1007072): Member [keyboard] tagged as <REFER does not have a member to refer to
    \\Record #1 - (3345) Error setting ID (#~@12#0#196#0@#~@3#0#562#0@#~karnataka) to member (karnataka)
    karnataka karnataka banglore banglore 457787 457787
    \\Record #2 - (3345) Error setting ID (#~@12#0#196#0@#~@3#0#562#0@#~Maharashtra) to member (Maharashtra)
    Maharashtra Maharashtra Pune Pune 411043 411043
    \\Record #4 - (3345) Error setting ID (#~@12#0#196#0@#~@3#0#562#0@#~Maharashtra) to member (Maharashtra)
    Maharashtra Maharashtra Pune Pune
    \\Record #5 - (3345) Error setting ID (#~@12#0#196#0@#~@3#0#562#0@#~maharashtra) to member (maharashtra)
    maharashtra maharashtra pune pune
    \\Record #6 - (3345) Error setting ID (#~@12#0#196#0@#~@3#0#562#0@#~Maharashtra) to member (Maharashtra)
    Maharashtra Maharashtra pune pune 441205 441205
    \\Record #7 - (3345) Error setting ID (#~@12#0#196#0@#~@3#0#545#0@#~Gujrat) to member (Gujrat)
    Gujrat Gujrat 123456 123456
    \\Record #8 - (3345) Error setting ID (#~@12#0#196#0@#~@3#0#562#0@#~maharashtra) to member (maharashtra)
    maharashtra maharashtra mumbai mumbai 433653 433653
    Edited by: 980685 on Jan 8, 2013 11:30 PM
    Edited by: 980685 on Jan 8, 2013 11:31 PM

    Hi All,
    Towards this error if we are talking about Hyperion Essbase - Version 11.1.2.1.000 and later.
    So mostly we are facing this issue has been verified as unpublished Bug 12967639.
    As documented in KM:
    Unable to Save ASO Outline After Renaming Members, "Error(1007072) Member [xxx] tagged as <REFER does not have a member to refer to" [ID 1465850.1]
    Also towards ASO there is another document having all there as:
    Oracle Hyperion Essbase and Aggregate Storage (ASO) [ID 1291202.1]
    Thanks,
    Shaker

  • Can't Login from Essbase Studio

    Hello Everyone,
    I am new to Essbase. I have successfully installed Essbase in Unix server. But when i tried to login from essbase studio which I have installed in windows. I got the following error from log files in the server.
    [ESSBASE0] [ERROR:32] [TCP-17] [] [ecid: 1361889277748,0] [tid: 1098848576] Network error: Timed out before receiving all data
    and I got following error in the client side
    Error Connecting to Essbase Studio Server
    Reason :
    Network Error
    ps: I can ping to the server and also login to Essbase Administration Services

    Hello John,
    I can also connect ./start_BPMS_bpms1_CommandLineClient.sh from command line in Unix server. But i couldn't connect from my studio console install in windows.
    I am getting the following error.
    Network communication with the server failed. Check your network connection and try again.
    Connection timed out: connect
    Help!!!
    Edited by: Khadka on Feb 28, 2013 9:34 PM

  • Teradata connectivity from Essbase Studio

    Hi all,
    We are trying to connect connect to Teradata server from Essbase studio console from Windows.
    The Essbase Studio server is on Linux. We can ping to the Teradata server both from Windows ad Linux.
    But when we enter the server name, user name and password, it tells connection can't be established.
    We have put the Teradata jdbc driver jar files inside the EssbaseStudio server directory.
    We are getting same connection can't be established error in the Essbase Studio server logs.
    Do we need to put the jar files somewhere in Windows as well?
    Can someone help?
    Thanks.

    I assume you looked at http://download.oracle.com/docs/cd/E17236_01/epm.1112/est_user.pdf in the admin section. There is another thing, In the Essbase.cfg file is a section that looks like
    BPM_Oracle_DriverDescriptor "DataDirect 6.0 Oracle Wire Protocol"
    BPM_DB2_DriverDescriptor "DataDirect 6.0 DB2 Wire Protocol"
    BPM_SQLServer_DriverDescriptor "DataDirect 6.0 SQL Server Native Wire Protocol"
    ;BPM_SQLServer_DriverDescriptor "SQL Server"
    ;BPM_Netezza_DriverDescriptor "NetezzaSQL"
    BPM_Teradata_DriverDescriptor "Teradata"
    ;BPM_ORACLEBI_DriverDescriptor "Oracle BI Server 11g_OHXXXX"
    ;BPM_ORACLEBI_DriverDescriptor "Oracle BI Server"
    BPM_MySQL_DriverDescriptor "DataDirect 6.0 MySQL Wire Protocol"
    make sure teradata is not commented out.

  • Excel Addin Pull error from Essbase studio cube

    Hi There,
    I have cube deployed from essbase studio with dupilicate member name enable. however user gets error "unable to resolve duplicate name "2010" on line 1" error when using Excel addin and SmartView. I guess I have year 2010, also have account 2010, but it build and deploy fine.
    Any suggestion?
    Many thanks
    Edited by: Donny on Jul 28, 2011 5:29 PM

    I think I figure it out

  • TimeSheet - Message from webpage __error Loading

    Hi,
    In Project Server 2013 we notice that for some users tasks (from some projects) cannot be added to the TimeSheet. After the user selects the specific task the browser displays the message:
    Message from webpage
    __Error Loading
    The log files don't seem to mention anything and turning on the compatibility view mode for this web address doesn't solve this issue either.
    Hope somebody can help us out.
    Rgds, Frank 
    Frank Jutte Winvision (http://www.winvision.nl) Project Manager / EPM Consultant

    Hi Frank,
    It can be due to many reasons. Which IE version are those users working with?
    First check for those users' permissions
    Check that the users' projects and/or assignments has not been delete in the project
    Try to delete the timesheet (or recall if submitted)
    Try to delete in Project Pro assignments and tasks and create them again
    Hope this helps.
    Guillaume Rouyre - MBA, MCP, MCTS

  • Loading the data from essbase studio to the cube

    I am building application using Essbase studio 11.1.2
    I have been able too create the hierarchies, but I am not clear on the process of assigning the data piece.
    In this instance all data is in a table named “FullPolicyCount”
    What is the process for a successful load of the data to the cube
    Please advise

    Hi,
    take a look into psa data. The key is defined by the request, the record number, the data packet and the change indic. Use the same key for your ods/dso and you will get all records to your ods/dso. Use update mode overwrite for the keyfigures (but just because it is the default). With the obove mentioned key it doesn't matter if your update mode is overwrite or addition.
    regards
    Siggi

  • Recorded message from Verizon

    Hi folks,
    I received a recorded message the instructed me to go to vzw290.com, or something like that to redeem something. I wasn't given the option to re-listen to the message, and I wasn't prepared to write anything down. I went to my account, and I don't see anything that leads me to believe I have a refund coming or anything like that. Have any of you experienced this? Could it be some kind of scam or something?
    Thanks,
    Barry

    It's not from Verizon, it's a scam.  There are numerous threads about it here.

  • ISE 1.2 rejects RADIUS messages from 5508 WLC

    The setup in ref is:
    WLC 5508 HA pair running 7.6 talking to ISE 1.2 patch 7 (was 6).
    Wireless users are authenticated fine, so the 5508 is a valid NAD in ISE, but...
    When I setup active RADIUS fallback, so that the WLC can poll the ISE servers I get the message:
    "The RADIUS request from a non-wireless device was dropped because the installed license is for wireless devices only"
    Why would ISE drop a RADIUS message from a WLC which is a wireless device?  Surely this is a mistake?

    Hi Nicholas,
    This is a known defect.
    CSCug34679    ISE drop keep alive coming from WLC. 
    <B>Symptom:</B>
    ISE drops keep alive authentications coming from the WLC, with message 11054 Request from a non-wireless device due to installed wireless license.
    <B>Conditions:</B>
    When only a wireless license is install on the ISE and using active keep alive on the WLC.
    <B>Workaround:</B>
    Use passive keep alive on the WLC and not active.
    Regards,
    Jatin Katyal
    *Do rate helpful posts*

  • Error in Cube Deployment from Essbase Studio

    Hi All,
    I am very new to ESSBAE Studio. I build up a minischema, dimension element(drag and drop from minischema), hierarchy(using dimension element) , Cube Schema and Meta model.
    Now when I'm going to deploy the model to Essbase Console It throws error :
    Member load for dimension Measure started at: 29-Nov-2012 12:52:32 o'clock GMT.
    Member load for dimension BU started at: 29-Nov-2012 12:52:32 o'clock GMT. Member load elapsed time:  1 Second.
    No mapping found for class : \'test'\'Dimension Element_MS'\'BU_V'\'ESS_PARENT'.
    Any help on this please.
    Thanks in advance.
    Pradipta

    Hi KosuruS,
    Thanks for your help. But,
    1> I have duplicate member names(as shared hierarchy)..but not with delayed key binding.
    2> I don't have any user defined member with member formula.
    I have my Measure hierarchy which have user defined member other than measure all hierarchies are coming from views.
    Even it shows error which is a staight hierarchy like :
    currency
    ----usd
    ----eur
    Regards
    Pradipta

  • Automated message from Essbase

    Hi All,
    i got this request from one of my business users.
    H ewants to knwo whether Essbase can send an alert based on data value.
    for example if the net income is below 50Mil it has to send an alert (email) to users list.
    Is there any way to achieve this.
    Thanks in advance.
    Dornakal.
    www.dornakal.blogspot.com

    HI,
    By using Trigger, you will send the alert message to users.
    Types of Trigger:
    There are two types of triggers: on-update triggers and after-update triggers.
    On-update triggers are activated during the update process, when the block containing the data referenced by the trigger is brought into memory.
    After-update triggers are activated after the update transaction is complete.
    Note: On-update triggers are supported only on block storage databases.
    I think you get the some idea about trigger. For more information, please refer the Essbase DBAG.....

  • ISE 1.2 rejects RADIUS messages from vWLC

    Hello,
    I have an ISE appliance with the Wireless license. The Cisco vWLC is configured to send Radius traffic to the device, but is getting the error message:
    11054 Request from a non-wireless device was  dropped due to installed Wireless license
    The vWLC is showing up under endpoints as a VMWARE workstation, and not a WLC, and so under the licensing requirements will not allow RADIUS to be received from anything other than a WLC. I tried hard-coding the policy to match a Cisco WLC with a condition of matching its MAC address, and even disabled the VMWARE profile policy, but the endpoint then only matches the "Unknown" policy. Any ideas?

    Check the Cisco ISE dashboard (
    Operations > Authentications
    ) for any indication
    regarding the nature of RADIUS communication loss. (Look for instances of your
    specified RADIUS usernames and scan the sy
    stem messages that are associated with
    any error message entries.)
    Log into the Cisco ISE CLI
    2
    and enter the following command to produce RADIUS
    attribute output that may aid in debugging connection issues:
    test aaa group radius
    new-code
    If this test command is successful, you should see the following attributes:
    Connect port
    Connect NAD IP address
    Connect Policy Service ISE node IP address
    Correct server key
    Recognized username or password
    Connectivity between the NAD and Policy Service ISE node
    You can also use this command to help narrow the focus of the potential problem
    with RADIUS communication by deliberatel
    y specifying incorrect parameter values
    in the command line and then returning to the administrator dashboard (
    Operations
    > Authentications
    ) to view the type and frequency
    of error message entries that
    result from the incorrect command line. For example, to test whether or not user
    credentials may be the source
    of the problem, enter a username and or password that
    you
    know
    is incorrect, and then go look for error message entries that are pertinent
    to that username in the
    Operations > Authentications
    page to see what Cisco ISE
    is reporting.)
    Note
    This command does not validate whether or not the NAD is configured to use
    RADIUS, nor does it verify whether th
    e NAD is configured to use the new
    AAA model.

  • Problem creating a repository in Oracle from Visual studio Load test

    Hi,
    I have an issue which will be greatly appreciated if answered soon. I have created a load test using Visual studio 2010 Ultimate in Oracle 11 g environment . I just want to create a load test repository in Oracle db to store results of the load test results. I have read on MSDN the method to do so for SQL server(at http://msdn.microsoft.com/en-us/library/ms182600.aspx) but not Oracle. Please respond asap. Thanks

    912605 wrote:
    Hi,
    I have an issue which will be greatly appreciated if answered soon. I have created a load test using Visual studio 2010 Ultimate in Oracle 11 g environment . I just want to create a load test >repository in Oracle db to store results of the load test results. I have read on MSDN the method to do so for SQL server(at http://msdn.microsoft.com/en-us/library/ms182600.aspx) but not >Oracle. Please respond asap. Thanks
    I could be wrong, but I believe to achieve this you will need to buy a third party tool that supports the Load Testing project with Oracle like "Toad Extension for Visual Studio".

  • Can anyone tell me how to I get an old account information and recorded messages from a conversation

    I am totaly confused by eircom and efibre.......last year I was in arrears with eircom to the tune of( as I thought) of €357.66and I was disconnected but in the long run I got a huge bill in my door of  €656.48 , when I had to the money to pay the original amount, I was put through to efibre who told me that remaining amount of €298.77 shouldnt have been on my account and they would take it off I was also given a new account and phone number. I have now got several bills from my old account plus a letter from a company called BCW (debt collectors) who are treathening to take legal proceeding against me...... can anyone tell me how do I get my old account information and that conversation I had that day??

    Thanks Tracey,I got a letter from the debt collectors BCW on Thursday to say if I didn't respond to that letter within 5 days they were going to take legal proceeding against me. 10 minutes from receiving the letter I got a call from BCW to say that eircom had been in touch with them to say the issue has been resolved and that I don't owe the money,I am now waiting on a letter from BCW to tell me same so as I have it in writing. So hopefully that is the end of the issue, Many thanks Confused 1

  • Trying to record message from my voicemail

    I have a mic hooked up to a "inspire 1394" which is hooked up to my computer via firewire. I'm able to hold my phone up to the mic and record onto garageband but its not that clear.
    Does anyone know of a better way to do this?
    Or is there way to minipulate what I've recorded. I'm new at garageband.
    Thanks
    Gerry

    i've have used cordless panasonic and siemens phones that have the mini headjack outlet (it is smaller than 3.5mm). I just spliced a mini cable to an RCA or 1/4" and bingo, instand line level phone tap.
    if your talking about a cell phone, then you can do the same thing by modifying a handsfree set.

Maybe you are looking for