Rel. strategy is not triggered while creation of PR with cost centr

Hi Gurus,
While creation of PR release strategy is not getting triggered with cost centre BCWSV870. But release strategy of PR triggered for cost centre BCWSV852 (In PR changed only cost centre as BCWSV852 instead of BCWSV870). Both cost centres are similar and the both cost centres are exist in characteristics value in CL20N for the same release strategy.
My question is why for one cost centre triggers release strategy triggers and for other cost centre release strategy is not triggered. Can you please tell how come this and rewarded for answer this.
With regards,
C. Sundar Rajan

Hi,
In regard to problematic PR with cost center BCWSV870, was your PR maintained with only one line item? or multiple line items?. In additions, when defining cost center as part of the release strategy structure, did you enter all cost centers with leading zeros? Tak a further look into OSS Note 365604 for your further investigation.
Cheers,
HT

Similar Messages

Credit Check is not working while creation of the delivery

Hi,
Credit check is not performing while creation of the delivery.
As per current settings, there is no credit check at SO level. Ideally, system should show an error message while creation of the delivery if credit limit of the customer is exceeds.
Below is the current OVA8 setting for Delivery group 02.
It was working fine till last week, but due to some unknown changes in customization or master data, same is not working now.
Could you please check below settings and suggest if any setting is wrong?

You talking about the reaction field D am talking about beside to reaction field that is status/Block(check) .
Status/Block(tick) is used to block the document.
Where as you reaction field is used to give the either warning or error message based input you are giving
A and C gives warning message and allow to save the document.
B and D gives error message and will not allow to proceed further
Please check this and try system will block the delivery.
thanks,
Srinu.
Message was edited by: Srinu S

I am unable to Save the "Note" field while Creation of new Contact

Hi ,
I am unable to save the Note field while Creation of Contact in Web UI.
Its happening in the Dev system but not in the QA Web UI.
I have tried to debug the component BP_CONT, But no use.
Can any one tell me the what could be the problem?
Regards,
DN

Hi DN,
The Notes part comes from the following view:
BP_DATA/Notes (Context Node: NOTES; Attribute: TDLINE)
You can debug in this view.
It could also be a case of missing authorization - the entered text don't get saved when the user does not have authorization to save text in text objects. Please check.
Regards,
Shiromani

PO release strategy is not triggering if Quantity pre.Qty

Standard SAP design will trigger the 'PO release strategy' if Total net order value (GNETW) is more than set. Lets take if PO created with Qty 100 and Price 50 then first time 'PO release strategy' is triggering when you save the PO. Next time when you change Qty less than the previous value like 80 from 100 then 'PO release strategy' is not triggering but if you enter more than previous value as 120 then its triggering. Ofcourse it makes sense but our user wants to trigger if any changes happened to QTY or PRICE. Is there anyway to trigger?
Found user exit - EXIT_SAPLEBND_002 but not sure what needs to be changed. Can one let me know the solution, if you have any.

Hi.
According to note 493900, question 4, release strategy is reset only
for some specific case. Alternatively, please question 5 from this note
release strategy might be redetermined. However in order to determine a
new release strategy the field that is changed in PO must be included
as one of the fields in the strategy. Thus there is no standard way
for resetting/redermining release strategy for a change of e.g. text
on header or item level.
Please also kindly refer to other 2 useful notes for this area:
662993 Resetting an already occurred release
365604 FAQ: Release strategies in purchasing
BR
Nadia Orlandi

BADI ME_PROCESS_PO_CUST is not triggering while creating/changing PO

Hi,
I am new to BADIs,
I am trying to implement BADI ME_PROCESS_PO_CUST in ECC 6.0. I have done the implementation and activated. I kept a break point in PROCESS_ITEM method, but the BADI is not triggering while creating or changing the PO. Please advice me what could be the reason behind this?
I used the SQL trace but i couldn't get the BADI ME_PROCESS_PO_CUST in the list.
thanks in advance
Regards
Jagadish

hello jagdish,
implement this user exit.....
MM06E005...
go to EXIT_SAPMM06E_017 in that then you can put a break point in the user defined function module.....
or use
BREAK 'C5133392' (use your user in place of C5133392)....it will stop here while creating PO or changing PO...
now you can do whatever you want to do in create or change PO using this function exit......
perform the validations on import parameters.....to create or change ....and activate the project....
hope this will give you some idea and help

Why do i get an error ( language code suply is not valid) while trying to sync with my ipad2

why do i get an error ( language code suply is not valid) while trying to sync with my ipad2
i'm using macbook pro and trying to share some photos with my ipad2. when i try to register my ipad i get this error.
tnx,
Dani.

AMDS for Windows
http://support.apple.com/kb/TS1567

LPD_CUST not triggering transport creation

When I make a change using tcode LPD_CUST, system does not prompt for creation of transport....why?

Hi
I am also facing the same issue. I checked the note. This not is valid for 7.02 SP09 whereas I have 7.02 SP10 and this note cannot be applied. Still I'm not able to transport the changes as it doesn't asks for the transport requests.
Any help is appreciated.
Thanks
Ravi

MM Release Strategy with Cost Centre

My characteristics for the release strategy is Accnt Assigmnt (KNTTP), Cost Centre (KOSTL) and Amount (GSWRT). I link all to the ceban straucture, and for the cost centre, I entered in the value tab the cost centres that I am using, and I entered the cost centres in the release strategy. Everything seem OK for the release strategy, but the release strategy is only selecting the strategy according to the values and not considering the cost centre, what can I do let it consider the cost centre and the value. I have been struggleing with this problem more than a week now. I tried everything that I can think of. Can someone assit me in this matter. I am on ECC 6.
Thank you.

Refer OSS Note :: 52225
Solution ::
Summary
Symptom
Purchase requisition release strategy with classification does not work as expected when the characteristic for cost center KOSTL is included.
Message ME297 is displayed.
Additional key words
CEBAN-KOSTL, KOSTL, Cost center, Release strategy, OMGQ, ME297
ME51, ME52, ME53
Cause and prerequisites
Numeric values used for the cost center characteristic in the purchase requisition release strategy with classification is not recognized. CEBAN-KOSTL is a CHAR field of length 10.
Solution
Enter leading zeros for the cost center value in the release strategy. eg. If the cost center value is 123456, while entering this value for the cost center in the release strategy, enter it as 0000123456.
Cheers !!!!!!
Biswajit

MIRO Error-Can not post to mat.account & using overhead cost centre &.

Dear Colleagues,
On MIRO,users have come across this error where they can not post to a particular G/L account using 2 different cost centres(219 & 220).
We have some validations on OB28 but although one particular step menitons this message as I stated above,the prerequisite of that step seem to be referring to G/L IN VAL_Plant No_16 AND Cost Center IN VAL_Plant No_17.
Whereabouts I need to maintain this G/L account/Cost Centre Combination?II had a look at OME9/OKB9 but couldn't get any resolution looking over there...
All Help appreciated.
PAPJ1.

I had to tweak the types of error messages on OB28 temporarily,to allow for these postings to go through and it worked!.
PAPJ1

Transaction type not found while creation of service order/ticket

Dear All,
I had done all basic configuration of CIC but i am not able to create service order and service ticket.
When i trying to create i am not able to find any transaction type but if i want to create follow-up document from CIC screen then i am able to create both the thing. I am not able to find out where is the problem. can any body help me out.
Thanks & regards
Neeraj

Hi Francis,
Thanks
I am on Interaction Center WebClient 2007.
I have already done the configuration and Transaction type is popping up for selection screen but once i select the transaction type then system automatically canceled the transaction "Transaction Cancelled"
But in the same time if i am trying to created follow-up transaction with reference to previous transaction then i am able to created service ticket/service order.
what could be the problem?
Regards
Neeraj

Capacity check is not working while creation of Production order

HI Gurus,
I want to restict the system that in case of insufficient capacity at the work centers, sysstem should not create the production order. For that i did the setting
1) Unchecked the tick for the Capacity check & enter the profile SAPSFCG013 in the OPJK for the business functions 1 & 2.& also make the setting for the Release order '3".
2) Maintain the same profile in the production profile & maintain that profile in the Mat Master
3) In the CR02, activate the tick for the finite scheduling & uncheck for the can used for several operations.
But i have creted the production orders & at the time of capacity check system is giving the message " Capacity avaiolable at all the work centers. But i check in the CM50, all the work centers are overloaded at the respective date.
But i can create & release the p[orduction order.
Requesting all to give your comments & solutions.
Regards
ACP

ACP,
....after confirming all the operations system is allowing me to save
When you confirm an order, you are by definition saying that the capacity existed for that order (you have just declared to the system that all operatons have been performed, and therefore all capacity was available). I can't imagine why you would not wish to save that order, since you must somehow post the physical work that has already been done. Capacity availability check is really only useful when the order to be checked has not yet been executed.
CM50 displays capacity requirements. CM50 does not perform the same function as Capacity availability check. To ensure that all of your orders fall within you capacity constraints, you must perform capacity levelling. Capacity availability check does not work the same as a Material availability check - don't assume that what you know about a material ATP will be applicable for a capacity ATP. Read the help on Capacity levelling. It is not generally possible to stop a manually created production order from being saved, due to any capacity situation, without using an enhancement.
http://help.sap.com/saphelp_erp60/helpdata/en/60/13e308133a11d3bf550000e83235ee/frameset.htm
Naturally, you can use enhancements to have the system meet any business requirement that is not met with the standard Cap Availability check.
Best regards,
DB49

Business Event not triggering the SOA BPEL Process with OA Adapter

Hello Gurus,
I am working on Business event "oracle.apps.per.api.employee.create_employee" and the event is getting triggered when creating an employee from EBS.
The message has come till WF_BPEL_QTAB(I could seeit) and in "READY" status.We have a SOA BPEL Process that is subscribed to the event "oracle.apps.per.api.employee.create_employee" using OA Adapter.
The issue is that the SOA BPEL process is not getting triggered and it is not dequeing the message from WF_BPEL_Q.
Please let me know if I have missed any steps on SOA BPEL side.
Note: Agent Listener is up and running.
Thanks,
Sunil

Ofcourse, I subscribed to the business event using BPEL. Ideally the instances should be created and I should be able to receive the standard payload.
Yes the JNDIs are correct. We have other business events working in the same fashion and we are using same JNDI.

Tds line item not simulating while posting as reference with FBR2

Dear All
When I am posting an Invoice using previous document as reference with Tcode FBR2 WTax line Item not simulating, but while I am posting without reference i.e. with Tcode FB60 it is simulating, this problem i am facing in production server from this fiscal year but in development server it is working properly.
what is the possible cause and how to solve this problem.

Hi,
For WHT cannot be deducted by using F-02 OR FB01. It seems system is using the same transaction in background and not FB60 and hence tds is bnot getting deducted.
Regards
Milind Sonalkar

IDOC-FILE - If IDOC is not triggered, need to genarate file with constants

Hi Friends,
I have a scenario like this.
IDOC to FILE scenario.
1. IDOC will get triggerd everyday and flat file will be genatated at specified location.
2. If IDOC is not genarated for the day, need to genarate falt file with some constants.
Can anyone help me on this.
Thanks in advance.

Hi Vivek,
I assume that Idocs are being triggred from a different system say SAP r/3 system to XI server. Since you do not have any messages to verify whether idoc has been triggred for the day or not, you have to keep a log in the SAP r/3 system in form of a table. This table (say Z_IDOC_TIME) will contain one entry having date and time when last idoc has been sent to PI system. Now one ABAP code is required which will continuously read the contents of last entry in the ZIDOC_TIME and compare with current server time. If the difference between the time is found to be more or equal to 24 hours then emails can be triggred to a fixed set of recipients. The set of recipients may be made dynamic by storing them in a table say ZEMAILID. So the ABAP program will take contents from both Z_IDOC_TIME and ZEMAILID. The flat file with constants can be attached with the emails.
In case you do not want emails to be sent then you would require batch jobs which will run in background. This batch job will check at a particular time if iodcs were sent for the day or not. If they not been sent then it will call ABAP code to trigger iodcs with a different data set than what is expected by PI in normal conditions (may be you can populate the idoc with the constants you would like in the file). When such an idoc is received in PI then you can easily generate an flat file with required constants.
regards
Anupam

I realize ads on most screens that I have not summoned while navigating the internet with FireFox. .

I think that this may have contaminated my browser when I was seeking a substitute for a PDF program offered by Adobe. I obtained a free program called PDF Creator. This I believe is the culprit, but I don't know for sure. Please, I don't know that it is responsible, but it sure is timely. I must say that I have tried to remove this program but have had no success. Any ideas as to how I can get rid of this rascal or whatever it is that is causing the problem?

Start Firefox in [[Safe Mode|Safe Mode]] to check if one of the extensions (Firefox/Tools > Add-ons > Extensions) or if hardware acceleration is causing the problem (switch to the DEFAULT theme: Firefox/Tools > Add-ons > Firefox uses the about: protocol to access built-in about: pages that you can open via the location bar just like you open web pages.
*http://kb.mozillazine.org/About_protocol_links).
*Do NOT click the Reset button on the Safe Mode start window or otherwise make changes.
*https://support.mozilla.org/kb/Safe+Mode
*https://support.mozilla.org/kb/Troubleshooting+extensions+and+themes
Do a malware check with some malware scanning programs on the Windows computer. 
Please scan with all programs because each program detects different malware.
Make sure that you update each program to get the latest version of their databases before doing a scan.
*Malwarebytes' Anti-Malware: http://www.malwarebytes.org/mbam.php
*SuperAntispyware: http://www.superantispyware.com/
*Microsoft Safety Scanner: http://www.microsoft.com/security/scanner/en-us/default.aspx
*Windows Defender: Home Page: http://www.microsoft.com/windows/products/winfamily/defender/default.mspx
*Spybot Search & Destroy: http://www.safer-networking.org/en/index.html
*AdwCleaner: http://www.bleepingcomputer.com/download/adwcleaner/ http://www.softpedia.com/get/Antivirus/Removal-Tools/AdwCleaner.shtml
*Kasperky Free Security Scan: http://www.kaspersky.com/security-scan
You can also do a check for a rootkit infection with TDSSKiller.
*Anti-rootkit utility TDSSKiller: http://support.kaspersky.com/5350?el=88446
See also:
*"Spyware on Windows": http://kb.mozillazine.org/Popups_not_blocked

Rel. strategy is not triggered while creation of PR with cost centr

Similar Messages

Maybe you are looking for