Relais 1xUm, Relay 1xChange

Hallo Leute!
Ich suche für Multisim ein Modell eines Relais mit 1xUm. Man findet nur solcherlei, die 1xAn können, 1xUm gibt es nicht.
Hat jemand solch ein Modell oder weiß, wie ich es mir erzeugen kann?
Ich muss allerdings dazusagen, dass ich zwar weiß, wie Multisim bedient und damit einfach simuliert wird, jedoch nicht näheres wie Modelle selber erstellen oder programmieren. Wenn also einer eine Idee hat, wie ich das mit meinem Wissen machen kann, wäre ich sehr verbunden!
Vielen Dank,
Matthias
Hello Guys!
I'm searching  for a multisim model which simulates a relay with 1xChange. In Multisim, I only find the models fitting the function 1xOn, but none of these with 1xChange. Does anybody have such a model implemented yet or can tell me how to do this?
I have to mention that my knowledge about mulitsim ist not very well. It is enough to use the program für simulation but I never made models on my own or wrote some program code for it. So if anybody has an idea how to solve the problem, please be so kind and reply this message with detailed information about it.
Thank you very much!
Greetings from Germany,
Matthias
Message Edited by Matse.P on 09-18-2008 05:44 AM

If I understand correctly you need either a Form B or Form C Relay. You can find some of the under the ELECTRO-MECHANICAL>COILS_RELAY. This is the only place to find these and as far as I know these are the only ones available like this in Multisim.
I hope I have understood what your needing. If not please let us know.
Kittmaster's Component Database
http://ni.kittmaster.com
Have a Nice Day

Similar Messages

  • How to use niSwitch_InitWithTopology with PXI-2567 relais card

    Hello,
    I'm trying to get the NI Visual Basic example niSwitchControllingAnIndividualRelay.vbp working with a PXI-2567 relais card.
    I doesn't seem to get my ResourceName and Topology (the first two parameters of the niSwitch_InitWithTopology function) right (the example program creates the errors 1074130544 "This session is not valid" and 1074135030 "Failure loading driver module").
    Where can I find the right ResourceName and Topology for the PXI-2567 (self test all right) to fill in these two parameters ?
    With thanks,
    best regards,
    Geert
    Attachments:
    IMG1.gif ‏28 KB

    Hello AlessioD,
    the relay card PXI-2567 stopped "working" again (I don't know why). So I checked the 'Tools' - 'Select switch card' from the Measurement and Automation Explorer with as result the error "Failure loading driver module" on 'OK'.
    Seems that the driver module of this PXI-2567 can't be loaded. NI-switch 32.dll gives the same error report from the Visual Basic sample program.
    What can be the problem and how to fix it ?
    With thanks,
    best regards,
    Geert
    Attachments:
    driver_not_loaded1.gif ‏37 KB
    driver_not_loaded2.gif ‏28 KB

  • Can not send mail via the server no webmail no smtp relai

    *relai host username and password is set correct:*
    log:
    Sep 8 22:00:07 macserver postfix/smtp[4939]: warning: SASL authentication failure: No worthy mechs found
    Sep 8 22:00:07 macserver postfix/smtp[4939]: CD63667854: to=<[email protected]>, relay=smtp.1und1.de[212.227.15.167]:25, delay=2.1, delays=0/0.07/2/0, dsn=4.7.0, status=deferred (SASL authentication failed; cannot authenticate to server smtp.1und1.de[212.227.15.167]: no mechanism available)
    *I did not understand that??!!*
    *with my old server 10.5 this does run perfect*

    I use Apple Mail. Since I upgraded to 10.6.1 my mailboxes go offline without reason. I have smtp problems although all settings are OK. When will all those problems be fixed by Apple?

  • Can not send mail via the server 7 no webmail no smtp relai

    *relai host username and password is set correct:*
    log:
    Sep 8 22:00:07 macserver postfix/smtp[4939]: warning: SASL authentication failure: No worthy mechs found
    Sep 8 22:00:07 macserver postfix/smtp[4939]: CD63667854: to=<[email protected]>, relay=smtp.1und1.de[212.227.15.167]:25, delay=2.1, delays=0/0.07/2/0, dsn=4.7.0, status=deferred (SASL authentication failed; cannot authenticate to server smtp.1und1.de[212.227.15.167]: no mechanism available)
    *I did not understand that??!!*
    *with my old server 10.5 this does run perfect*

    I second That...
    Please give us a hint!

  • RV320: DHCP Option 82 + DHCP relay at Ethernet switch

    We purchased a RV320 router and want to use the DHCP Option 82 IP Assignment in combination with a ZyXEL GS1910-24 Smart Managed Switch.
    The switch is able to insert Option 82 Circuit-IDs into DHCP requests, if they are relayed to a specific DHCP server. So there must be configured exactly one IP address of the DHCP server in the switch configuration (eg 192.168.1.1). The problem is, that the RV320 creates different IP subnets for different Circuit-IDs. So the RV320-router has multiple IPs, one unique IP per subnet (192.168.1.1, 192.168.2.1, 192.168.3.1, ...).
    How can I use the Option 82 IP assignment with this configuration?
    Is a routing/firewall rule at the RV320 a solution (to forward DHCP requests from subnet specific IP - eg 192.168.3.1 - to exactly one IP, eg 192.168.1.1)?

    mpyhala,
    seems not to work as the RV320 is restricted to 6 custom VLANs (+ 1 Management VLAN with ID 1).
    Maybe I should describe the whole scenario, which should be implemented:
    The configuration is like for a small hotel: each room should be logically seperated from each other (no inter-room traffic for security) and each rooms bandwidth should be managed.
    Bandwidth management at the RV320 relies on IP addresses. So I need to achieve somehow, that a room (= port number on switch) is always assigned a specific IP address.
    14 rooms should be covered in that way.
    The problem is currently the link IP<->Switch Port. I thought DHCP option 82 is the way to go, but VLANs (one VLAN for each room) may be also a solution. Unfortunately none of the two ways work.
    What can be a solution? Was the RV320 the wrong decision (not enough flexibility)?
    Thanks.

  • Controlling relay board via printer cable

    Hello all,
    Please bear with me as I am an absolute beginner with LabVIEW, but want to learn.
    My boss has asked me to try and write a program to control a PC relay driver board, which is here: http://www.quasarelectronics.com/3074.htm
    According to the user manual "you can write your own programs in any language to output a byte to the printer port and the bits which are high will turn on the corresponding relay. The overlay on the PCB shows which bit in the output byte turns that particular relay on. For example, output 00010001, or 11 in hex turns on relays 1 & 5. Each relay number is also marked on the overlay for easy reference." Do I need a printer driver, do I need a DLL?
    Could anybody show me where I should start, or lead me through some way? To me the problem sounds like it might be relatively easy, but too much for me
    any help would be greatly appreciated
    thanks,
    Gwilym
    LabVIEW 7.1 unfortunately

    There is no need to use a local variable to do that. Do you have a background in text-based languages? I ask because most people who have done text-based programming and start out programming in LabVIEW immediately start using local variables thinking that LabVIEW works the same way as text-based languages. A front panel control can be set to blink by simply setting the blinking property. The blinking rate is set in the LabVIEW options:
    If you want to use a different blinking rate use a shift register in a loop:
    Message Edited by smercurio_fc on 08-08-2008 09:35 AM
    Attachments:
    Example_VI_BD6.png ‏2 KB
    Example2_VI_BD.png ‏2 KB

  • How do I clone a fully operational system that relies on Windows 7 for the underlying operating system?

    I'm a retired IT professional desiring to assist a friend who owns a small business who recently experienced very malicious attacks on her computers from unknown parties operating anonymously on the Internet. Because
    of her lack of preparation for such events, her future ability to continue to conduct her business was seriously threatened. The incident revealed, to my friend, the need to be prepared to deal with spontaneously occurring problems that create suspicious conditions
    that arise with modern computer software before they can be analyzed in a sufficiently comprehensive manner to have an opinion regarding the appropriate course of action for obtaining a permanent remedy. In that, the ability to quickly react on the basis of
    only suspicion is the goal.
    I want to recommend an approach that involves maintaining an offline image of an operational system that is capable of running any of her computers. This image needs to include all of the software required to run
    her business. In that, it is not limited to the operating system. This single image could then be used to restore any computer to a known reliable state should the need arise. This technique will also insure that each computer has sufficiently similar capability
    to allow them to substitute for each other. Insofar as image restoration is itself an operation susceptible to causing unacceptable business delay I'm also recommending that each of the identical computers (i.e., from a hardware perspective) operate in a multi-boot
    environment where a virtually offline backup can be instantiated via a simple reboot (i.e., an operation that all users of the Windows operating systems turn to when strange behavior is first observed). My intention is to limit the cloned system (i.e., partition
    or C: drive) to the operational software. The business data along with storage for temporary data will be isolated on other partitions (i.e, mounted with other drive letters) accessible by each instance of the software eligible for multi-boot operation.
    This kind of operation is something that I know how to setup on older versions of the Windows operating system. However, Microsoft has now dropped support for all of those operating systems and my much more limited
    experience with the currently supported operating systems reveals that changes to the boot process will necessitate making changes to the specific preparations needed to build such an environment.
    Before recommending that my friend replace all of her computers with new ones, that includes paying for new operating system (i.e., Windows) licenses, I need some assurance that the new operating systems are as
    good as the old ones in this respect. These need to be relatively inexpensive desktop computers and we're only talking about a few of them. Let's say fewer than half a dozen. My friend is a sole proprietor and even though her business has become completely
    dependent on what was once called personal computers she must operate on a fairly tight budget. This especially includes the budget for technology.
    The articles I've been able to find on the Microsoft support websites seem to treat multi-boot as a situation where someone is running different versions of possibly difference operating systems whereas my need
    to produce a single image that will both run on multiple computers as well as multiple partitions on the same computer. I'd appreciate finding some technical advice that applies to building such a system using a supported version of Windows.

    I tried the image creation/restoration described by Jared.  I don't think it makes much sense to rely on an operational system to do such a restoration therefore I opted for method 3 which involves using a "System Repair Disk".  My first
    reaction is what a crude tool.  The image creation process had no trouble putting the image on a simple network share.  However, it appeared as though the restoration couldn't even connect with the device.  I then copied the files to a USB drive. 
    In this case the repair disk said it couldn't find the files even though they were there.  It offered no mechanism to even look and see what was there.  It appears as though it will only find the image if it is located in a folder by the certain
    name used on creation and it is in root directory.  Not very handy.
    As ugly as all that was when we finally come to the point of making the restore it looks like the only option is to restore the entire disk, which in my case would mean also restoring both the windows partition and the recovery partition.  This just
    isn't what I want to do.  It is also something I wouldn't even consider doing unless it was the only possible way to recover from a failed hard drive.
    In summary, unless I've completely failed to notice how it works that just isn't going to work.
    I hope there is something better than this.  What about WinPE and ImageX?
    Absent anything useful from Microsoft it will be necessary to try using other software.  Time to try Acronis!  I guess.

  • NetBoot across subnets with a bootpd relay

    Hello Apple Community!
    I've got 4 subnets at my school, each with various Macs around campus.  I have a Mavericks server on each subnet currently, each with their own NetBoot images.  It's a pain to keep everything updated.  I can get a single client Mac (pre-2011) to boot across subnets using the bless command, but that's not really a viable solution for us to run a bless command on each client every single time we want to netboot.  So far, the solution has been just to have dedicated netboot servers on each subnet, but I know there has to be a better way.
    This article (OS X Server: How to use NetBoot across subnets - Apple Support) describes three different methods for netbooting across subnets, but two of them are not really viable for us.  Those involve reconfiguring the network to allow BootP data to pass across subnets or configuring one server with multiple network connections, one for each subnet.  However, option #2 describes configuring a bootpd relay.  Based on my reading, this sounds like exactly what I need.  However, I can't find any good documentation to walk me through setting it up.
    I've thoroughly read the bootpd man page, which has had me editing the /etc/bootpd.plist on multiple servers.  This hasn't gotten me very far.  My clients still don't see the remote NetBoot server.  It seems like the relay is supposed to redirect broadcasts from the remote Netboot server, through a local NetBoot server to the client.  But I have no idea how to make this work.
    Could someone please give me more guidance on what I'm supposed to be doing here?  I'd like to host a single NetBoot server and have any client on any subnet be able to option-boot to see the NetBoot startup options (I have multiple NetBoot images, from Apple Service Toolkit to DeployStudio and Mavericks/Yosemite installers in between).  Even if I could get it to just netboot to one default source (AST), I could deal with that.  I'm also happy to host multiple NetBoot servers, but with all my NetBoot images in one location.  I'm stumped in this multiple subnet environment and I need help.  Please help.

    Thanks again for your feedback.  I had forgotten I left the "tftp://" on the IP address.  Though, I've tried that multiple ways, starting with IP only.  Also, per the bootpd man page (https://developer.apple.com/library/mac/documentation/Darwin/Reference/ManPages/ man8/bootpd.8.html), <allow/> and <deny/> are lists for MAC address allowances and when nothing is defined everything goes through.  These are there by default, though I will remove them and see what happens.  Also, according to the man page, bootp_enabled enables on all connections when a boolean is set rather than an array.  Though I will still change this also and see what happens.  The array that comes after the netboot_disabled key is auto-generated by NetInstall when you turn the service on in Server.app.
    Essentially, that plist comes from a fresh activation of NetInstall.  I deleted the previous .plist, rebooted the server and when I turned on NetInstall, that's what was created, plus my bootp modifications.
    All that said, you said that you assumed I started the relay with the 'debug & logging' options enabled.  I haven't started the relay in any active sense.  So far, I've just been modifying this .plist, and rebooting a bunch of times, but that's where I seem to get lost.  Is there a way to actively "start" the relay?  I'd love to look at these 'debug & logging' options.  As for the 'Startup Disk' prefs on the client Mac, they do not show any significant change.  Basically, they just don't see the remote server as a startup option.  I have not gleaned any pertinent info from console, though I'm not sure I know what I'm looking for.
    On a side note, I had a wild hair to try something different.  I set my local subnet's server to look at a NetBootSP0 folder that was actually a symlink to a NetBootSP0 folder that was mounted as a file share from the remote NetBoot server.  This really looked like it might work.  When you boot the client, it saw the startup volumes from the remote server.  However, upon boot, it doesn't seem to make the connection and winds up booting back to the internal hard drive.  It was worth a try...

  • Cannot send mail from newsletter server and Server error: Unable to relay

    We have newsletter server. Sometimes we sent mail by our exchange 2010 server. But recently we are unable to send mail to external mail server. we sent mail by newsletter server within a domain now. We need to solve. Pls. check below log file and provide
    how to solve it.
    Sender ID: [email protected]
    our domain: www.silkways.net
    LOG:
    Status Msg : The email details entered successfully into the database.
    Status Msg : The email details entered successfully into the database.
    Access Level : 1
    MAIL SENT TO : [email protected]
    FAILED TO SEND MAIL TO : [email protected]
    Error : SMTP Error: The following recipients failed: [email protected]<p>SMTP server error: 5.7.1 Unable to relay
    </p>
     FAILED TO SEND MAIL TO : [email protected]
    Error : The following From address failed: [email protected]<p>SMTP server error: 5.5.2 Sender already specified
    </p>
    FAILED TO SEND MAIL TO : [email protected]
    Error : SMTP Error: The following recipients failed: [email protected]<p>SMTP server error: 5.7.1 Unable to relay
    </p>
     FAILED TO SEND MAIL TO : [email protected]
    Error : The following From address failed: [email protected]<p>SMTP server error: 5.5.2 Sender already specified
    </p>
     FAILED TO SEND MAIL TO : [email protected]
    Error : The following From address failed: [email protected]<p>SMTP server error: 4.7.0 Too many errors on this connection, closing transmission channel
    </p>
    FAILED TO SEND MAIL TO : [email protected]
    Error : SMTP Error: The following recipients failed: [email protected]<p>SMTP server error: 5.7.1 Unable to relay
    </p>
     FAILED TO SEND MAIL TO : [email protected]
    Error : The following From address failed: [email protected]<p>SMTP server error: 5.5.2 Sender already specified
    </p>

    Hi,
    Since you are able to send emails to internal domain i assume the application server IP address already allowed into Receive Connector.
    To relay application emails to external domain you should enable Externally Secured box in the Authentication Tab of the particular Receive Connector.
    Kottees :My Blog Please mark it as an answer if it really helps you.

  • Cannot send email just get a 'relaying' error messgae

    Hi
    Apologies if this has already been asked:-
    i have an iphone 4 and have upgraded to the latest version of ios.  But since then I cannot send emails from either my aol or hotmail account. I just get this error message:-
    A copy has been placed in your Outbox. The recipient "*****@aol.com" was rejected by the server because it does not allow relaying.
    Any ideas?  Everything was fine before hand.  I have tried deleting then reinstating my eamsil accounts both with wifi on and off and still no difference.
    Please help its driving me MENTAL!!!!!!  

    re: not understanding instructions, it sounds like you have not enabled the Menu Bar.
    In Thunderbird you will find life much easier when seeing all the toolbars.
    Click on the menu icon - it has 3 bars.
    Hover the mouse pointer over 'Options'
    a new drop down appears, select 'Menu Bar'.
    then you will see the Menu Bar above the tabs
    It shows: 'File, Edit, View, Go, Message, Tools, Help.'
    re: The mail server responded: 5.7.1 Missing or literal domains not allowed. Please verify that your email address is correct in your Mail preferences and try again.
    Tools > Account Settings > Outgoing Server
    you will only have the one verizon smtp
    I looked at the information you provided in the other question.
    Server name, port, authentication and connection security look ok.
    What do you have in the 'User Name' ?
    Do you have the full email address or just the first part before the @ ?
    The other thing to check is the firewall settings in the Actiontec Router.
    But this is not really a forum for dealing with your router.
    you should find the model number somewhere on your Actiontec router.
    There are different models, but sometimes the settings can be very similar.
    you should be able to do a google search for your model.
    I located this pdf for the GT701D model: see chapter 5.
    https://www.actiontec.com/products/manuals/GT701D_User_Manual_NCS_DSL_Modem-v1.0_3.0.4.1.1.pdf

  • Treo Pro Error Message 530 5.7.1 Relaying not allowed cannot send Email from pop acct

    I just purchased the treo pro thru Sprint. I love the phone I just cant seem to figure out the proper settings for my outgoing POP Email acct. Every time I set up the settings properly and attempt to send an email I get an error message "530 5.7.1 Relaying not allowed". I get this message with the outgoing server set to smtp.sprintpcs.com and i receive this error message through an "undeliverable" Email in the same account I am attempting to send from. When I have the account set to my ISP's outgoing server mail.optonline.net it will only send email if I have my device set to WIFI mode..... Any ideas? Thanks.
    -Jay- 
    Post relates to: Treo Pro T850 (Sprint)
    This question was solved.
    View Solution.

    audiojay11 wrote:
    P.s. I read in another posting where it advises to change the outgoing port # from 25 to 587. This sounds very familiar to me because when I recently set up my blackberry I believe cablevision advised me to do that exact modification. Now here is the million dollar question. How do you change the port #'s on the treo pro?
    Try adding it to the server name, e.g.: smtp.provider.com:587

  • HOW TO: Relay/Send email from websites, Server Monitor in OS 10.5 Server

    If you don't want to run your own mail server or configure DNS on your Xserve, but you still want your website or applications like Server Monitor to send email notifications; this is what you need to do:
    Scenario: Mac OS 10.5.2 Leopard - Advanced Configuration - Setup is for strictly sending emails through SMTP, routed through your ISP or another provider. This is not for receiving emails.
    -Open up Server Admin
    If you have yet to add in a server to admin, you need to do so. Resource PDFs on setting up OS X Server are available at Apple http://www.apple.com/server/macosx/resources/ and there are video tutorials at http://movielibrary.lynda.com/html/modPage.asp?ID=373
    -Click on your server, then choose the Settings button
    -Then choose Services from the Tabs/Buttons below
    -Select the Mail checkbox and then hit Save
    -Now choose the newly added Mail service in the left pane, then click the Settings button up top
    -Start with the Advanced tab. Under Security, un-check everything and don't use SSL unless you want to. You don't need to mess with the other sub-tabs here.
    -Next choose the Logging Tab. Under SMTP log level, choose debug so you will be able to see what goes on in the log.
    -Mailing List, Quotas and Filters tabs can go untouched. You can mess with them later if you want.
    -Click the Relay tab. It is a good idea to only accept relays from your local machine. If you uncheck this, I believe it leaves you with an open relay that anybody can access.
    -Now for the General Tab. Under Domain Name put anything you want. Any made up name and extension is fine.
    Under Host Name, again put anything you want.
    Un-check Enable POP, Un-check Enable IMAP - Basically un-check everything
    Check or leave checked Enable SMTP
    Now check Relay outgoing mail through host:
    Then enter your hosts SMTP server. ex. smtpout.secureserver.net
    Now check Authenticate to relay with user name: and enter your username and password
    -Now hit the Save button
    -Now we need to take a look at the main.cf file and add a few things
    -If you aren't showing all files in Finder already, open up Terminal.app
    Now type in: defaults write com.apple.Finder AppleShowAllFiles True
    Hit enter
    Now type in: killall Finder
    Now Finder should reset and all files should be visible - To hide all files, do the same thing but type False
    -Now open Macintosh HD and navigate to /private/etc/postfix/main.cf (Note: you won't be able to open and edit this in TextEdit. I recommend a program like TextWrangler http://www.barebones.com/products/textwrangler/download.shtml )
    -Once you have main.cf open, all your settings should be together at the bottom of the doc. Scroll down. You will need to add in a few lines and verify all the settings are exactly as below (except of course your own names and SMTP server):
    readme_directory = /usr/share/doc/postfix
    mydomain_fallback = anything.anyting
    messagesizelimit = 0
    myhostname = anything.anything
    mailbox_transport = cyrus
    mydomain = anything.anything
    mailboxsizelimit = 0
    enableserveroptions = yes
    inet_interfaces = all
    relayhost = smtpout.secureserver.net
    smtpsasl_passwordmaps = hash:/etc/postfix/sasl/passwd
    smtpsasl_authenable = yes
    smtpdsasl_authenable = no
    smtpsasl_securityoptions =
    smtpduse_pwserver = no
    smtpdrecipientrestrictions = permitmynetworks,reject_unauthdestination,permit
    smtpdpw_server_securityoptions = none
    -Now save the main.cf document
    -Now go back to Macintosh HD and navigate to /private/etc/postfix/sasl/passwd
    Open passwd with TextWrangler or you editing app, and verify that your SMTP server, username and password are correct. It should look something like this:
    smtpout.secureserver.net [email protected]:password
    -This should be what you entered in Server Admin when you first started. If all is well, quit your editing app.
    -Now, while you are still at /private/etc/postfix/sasl/passwd you need to edit permissions for passwd
    You can chmod in Terminal.app or secondary click on passwd and "Get Info"
    Click the lock and enter your password to unlock the settings
    Next click the + button and add yourself and Admin
    -Now you can close out of everything and go back to Server Admin
    -Hit the Reload (twisty arrow) button at the bottom and once everything is reloaded, hit Start Mail
    -Now type localhost in your browser to see if your website can send email. You can also open up other apps such as Server Monitor and do something to change the status to have it send an email.
    -You can click on Mail in the Server Admin and then view the SMTP log. As long as emails are being sent and then removed from the queue, you are in good shape. If you are getting an SASL error or mechanism error, open up main.cf and verify your settings and/or check permissions on passwd file

    Don't you need the Mail service running to have apps like Server Monitor send email notifications? - Also for hosted sites that use the sendmail function you need a service running to get the emails sent.
    Really you are not hosting a Mail server. It is open, but there is no incoming and if you only accept SMTP relays from the local machine, there should be no issues.

  • Postfix relay=none, ... status=deferred (Host or domain name not found...

    Hi,
    I actually posted this question 2 weeks ago but under the wrong topic. So, first of all wanted to apologise for double-posting... but since no one replied, I thought I'd try again under the right topic.
    I've been trying to solve this all day today (that was Feb 26th). I used to be able to send emails but for some reason it does not work anymore. At first I thought it was a problem with php (I use entropy pack php 5.2.6) but after searching the topic, I think it is a problem with my network. BTW OS is 10.5.5 and Postfix version 2.4.3
    First of all, after computer restart, I don't think postfix starts automatically
    Running 'sudo postfix start' gives me:
    postfix/postfix-script: starting the Postfix mail system
    Looking at '/var/log/mail.log' I find:
    Feb 27 12:51:04 AMs-MBP postfix/qmgr331: AA70A7A7C77: from=<[email protected]>, size=842, nrcpt=1 (queue active)
    Feb 27 12:52:19 AMs-MBP postfix/smtp456: AA70A7A7C77: to=<[email protected]>, relay=none, delay=3437, delays=3362/0.02/75/0, dsn=4.4.3, status=deferred (Host or domain name not found. Name service error for name=email.com type=MX: Host not found, try again)
    Running 'sudo postfix check' does not give me any errors
    Checking my '/etc/resolv.conf' it has nameserver 192.168.1.1
    Running 'ifconfig | grep netmask | grep -v 127.0.0.1 | awk {'print $2'}L' gives:
    192.168.1.5
    Checking http://switch.richard5.net/2006/08/19/fatal-open-lock-file-pidmasterpid/ and running 'launchctl list' gives me a long list but no item matches org.postfix.master
    Running 'ps aux|grep postfix' gives
    AM 546 0.3 0.0 599820 468 s000 S+ 1:41pm 0:00.00 grep postfix
    _postfix 331 0.0 0.0 599816 824 ?? S 11:56am 0:00.04 qmgr -l -t fifo -u
    root 329 0.0 0.0 600784 752 ?? Ss 11:56am 0:00.11 /usr/libexec/postfix/master
    _postfix 519 0.0 0.0 599768 752 ?? S 1:36pm 0:00.01 pickup -l -t fifo -u
    Running 'postconf inet_interfaces' at first gave me
    inet_interfaces = localhost
    which I changed to All in '/etc/postfix/main.cf'
    I looked at http://www.postfix-book.com/debugging.html
    Running 'telnet localhost 25' gives me
    Trying ::1...
    telnet: connect to address ::1: Connection refused
    Trying fe80::1...
    telnet: connect to address fe80::1: Connection refused
    Trying 127.0.0.1...
    Connected to localhost.
    Escape character is '^]'.
    220 AMs-MBP.local ESMTP Postfix
    quit
    221 2.0.0 Bye
    Connection closed by foreign host.
    But running 'telnet 10.1.2.233 25' gives me
    Trying 10.1.2.233...
    telnet: connect to address 10.1.2.233: Operation timed out
    telnet: Unable to connect to remote host
    Running 'ping 134.169.9.107' takes a long time. After a while I stop it and get:
    PING 134.169.9.107 (134.169.9.107): 56 data bytes
    ^C
    o
    + 134.169.9.107 ping statistics ---
    28 packets transmitted, 0 packets received, 100% packet loss
    I have not idea what the problem is and/or how to fix it. I know the messages get to the postfix daemon but for some reason they do not continue on their way.
    Please, does anyone have an idea of how to fix this?
    TIA,
    Elle

    Dynamic IP addresses with DynDNS Updater (or equivalent) makes it pretty darned reliable, particularly if you buy DynDNS' Mailhop Forward service, which prevents the likes of roadrunner.com and aol.com from blocking mail coming from your server just because it lives in dynamicIP-land. Way cheaper than paying your ISP extra for a static IPA, too, and totally acceptable for low-volume, residential-based servers for personal not-for-profit use.
    Regarding reliable delivery to a dynIPA server, you are only at risk of non-receipt for perhaps a few minutes immediately following when your ISP rotates your WAN IPA, until DynDNS Updater (or equivalent) updates the DynDNS (or equivalent) servers with your new WAN IPA. But that's really not a problem because I think all, well, okay, most, smtp servers will queue for a redelivery attempt if the initial delivery attempt just happens to occur at that time.
    I wouldn't suggest this practice for high-volume enterprise-class servers or for people trying to run a bootleg mail server business for profit (besides, the ISP would shut it down as an abuse of terms of service, anyways), but for low-volume, residential-based servers for personal use and enjoyment, which I suspect is the case for the O.P., I can't say that I find anything unreliable about my dynamic IP-based mail server.

  • Conflict resolution including the CRT DUMMYfor Add-On ST-SER rel.700_2007_1

    Dear all,
    Environment  #    32 bit win2k3, SAP   & Orc with 10.2.0.2.0
    We are in process of applying suport packs for Solution manager 7.0,  SAPKITL25 is finished
    When applying SAPKITL26 with  SAPKB70015, SAPKA70015 I am gettign the following CRT is required
    ST-SER rel.700_2007_1 .
    I did this add-on & applied support packs for this component ST-SER rel.700_2007_1 - 1,2
    &  tried  SAPKITL26 with  SAPKB70015, SAPKA70015 again but the error repeats . What is the last support pack in 32 BIT sap system fo Solution manager.
    Error -
    Phase ADDON_CONFLICTS_?: Explanation of Errors
    onflicts were found between the Support Packages that you want to
    mport and the Add-Ons installed in the system. To guarantee the
    onsistency of your system, the import is interrupted until all Conflict
    esolution Transports (CRTs) for the listed Support Packages are
    ncluded in the queue.
    o include the CRTs in the queue, proceed as follows:
    Write down the Support Packages and Add-Ons that have conflicts.
    Leave this screen by choosing 'Cancel' (F12).
    Load the CRTs for the Support Packages with conflicts from the SAP
    Service Marketplace or request them from your Add-On supplier.
    Define the extended queue again in the Support Package Manager.
    Import the queue. The Support Package Manager executes all steps from
    the beginning.
    f the problem involves an SAP Add-On, see SAP Note 53902, which tells
    ou which CRTs resolve the conflicts. Otherwise contact the supplier of
    our Add-On for details on how to proceed.
    he following contains a table of Support Packages for each Add-On for
    hich conflicts were detected. The column 'Information on the Conflict
    esolution' specifies how you can resolve a conflict. For more
    nformation, select the corresponding 'Information for the Conflict
    esolution'.
    onflicts Between Add-On ST-SER 700_2007_1 and Support Packages
    omponent    Release      Support Package        Information on
                                                    Conflict Resolution
    T           400          SAPKITL426             CRT: DUMMY
    Is this a known error or how to overcome this & clues on the following..
    -Rahul

    Dear Sunny,
    I went through the sap notes & found that i need to download ST-SER 700_2008_1.
    SAP Solution Manager 7.0 (Software component ST 400)
    ST 400 SP16 (SAPKITL426)
    With SP16 (SAPKITL426) SAP strictly recommends to upgrade your ST-SER tothe release 700_2008_1 or higher. Therefore use transaction SAINT instead of transaction SPAM to patch your system to SAP Solution Manager 7.0. If you try to patch your system via SPAM and your ST-SER release is 700_2007_1 or less you will receive one of the following information within SPAM during phase ADDON_CONFLICTS_?:
                        a) Conflicts Between Add-On ST-SER 700_2005_2 and Support Packages SAPKITL426 Include CRT
                        b) Conflicts Between Add-On ST-SER 700_2006_1 and Support Packages SAPKITL426 Include CRT
                        c) Conflicts Between Add-On ST-SER 700_2006_2 and Support Packages SAPKITL426 Include CRT
                        c) Conflicts Between Add-On ST-SER 700_2007_1 and Support Packages SAPKITL426 Include CRT
                        *Please be aware there is no physical Conflict Resolution Transport (CRT) available to solve this conflict (it is not planned to provide such a CRT). You have to patch your system via SAINT not via SPAM:*
                        1. Delete your SPAM-QUEUE by pressing the Display/Define button within SPAM.
                        2. Download all ST-SER Delta-Upgrade packages from the Software Download Center into your EPS-Inbox.
                        3. Call transaction SAINT and press Start button.
                        4. Select ST-SER 700_2008_1 or higher and press Continue button
                        All neccessary component packages will automatically be included into a valid SAINT-queue
    but  ST-SER 700_2008_1 not available to download & also noticed there are no manual CRT's
    how should i manage to patch system with ST-SER 700_2008_1 when it is not availble to download
    Thanks & regards,
    rahul

  • Exchange 2013 External Relay gives me a headache... Anonymous relay fail to external address

    I tried to set up external relay on my Exchange 2013 but was not able to do it. I don't know what else to do. I tried these:
    http://technet.microsoft.com/en-us/library/bb232021.aspx
    and these (which is pretty much same thing)
    http://www.shudnow.net/2013/06/04/how-anonymous-relay-works-in-exchange-2013/
    http://exchangeserverpro.com/exchange-2013-configure-smtp-relay-connector/
    http://glazenbakje.wordpress.com/2012/12/30/exchange-2013-how-to-configure-an-internal-relay-connector/
    http://blogs.technet.com/b/exchange/archive/2006/12/28/3397620.aspx
    But still no luck. Here is somewhat detailed description what I tried do accomplice. 
    Server which need  to send mail reports is sending these from web server on another location connected with site-to-site VPN to location server resides like on picture. I am able to send relay to all of
    addreses of local domain but when I tried to send mails to my clients to external e mail addresses exchange return me message unable to relay.
    Here is log from unsuccessfully operation
    Connecting to [smtp.mydomain.com] port [25]...
    220 smtp.mydomain.com Microsoft ESMTP MAIL Service ready at Fri, 24 Jan 2014 17:19:45 +0100
    >HELO webserver
    250 smtp.mydomain.com Hello [89.x.x.x]
    >MAIL FROM: <[email protected]>
    250 2.1.0 Sender OK
    >RCPT TO: <[email protected]>
    ERR: Received the following unexpected repsonse:
    550 5.7.1 Unable to relay
    >QUIT
    221 2.0.0 Service closing transmission channel
    Here is log from successfully operation:
    Connecting to [89.x.x.x] port [25]...
    220 smtp.mydomain.com Microsoft ESMTP MAIL Service ready at Fri, 24 Jan 2014 18:04:52 +0100
    >HELO webserver
    250 smtp.mydomain.com Hello [89.x.x.x]
    >MAIL FROM: <[email protected]>
    250 2.1.0 Sender OK
    >RCPT TO: <[email protected]>
    250 2.1.5 Recipient OK
    >RCPT TO: <[email protected]>
    250 2.1.5 Recipient OK
    >DATA
    354 Start mail input; end with <CRLF>.<CRLF>
    >From: Dane <[email protected]>
    >To: [email protected]
    >Subject: asd
    >Date: Fri, 24 Jan 2014 18:03:08 +0100
    >X-Mailer: Qm Version 2.1
    >MIME-Version: 1.0
    Content-type: text/plain
    >
    >test>
    250 2.6.0 <3ffb1fd6-e5e0-4232-9a6e-cac7b59db9df@exchange.mylocaldomain.local> [InternalId=6240587481093] Queued mail for delivery
    >QUIT
    221 2.0.0 Service closing transmission channel
    And here is picture:

    Hello,
    Thank you for your post.
    This is a quick note to let you know that we are performing research on this issue.
    Regards,
    Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Subscriber Support, contact
    [email protected]
    Simon Wu
    TechNet Community Support

Maybe you are looking for

  • Windows 7 Pro 64-bit / DWM Compatibility Issue/Crashes

    I've been having an issue for a few months, both on my old system and the new one.  Everything worked perfectly on the old machine up until I had tried to install a Comodo backup program (which messed up some permissions), after which a Visual C++ Re

  • X230 Screen Replacemen​: Check for warranty.

    So I bought my x230 off of ebay, and apparently it has a 3 year limited warranty... but I do not know whether it has a warranty for the screen? My laptop tumbled a foot off the ground (it slid from the edge of the bathtub, where I placed it while I w

  • Configuring Reporting Service Add-in for sharepoint - HTTP status 401: Unauthorized.

    I have the following setup Machine 1 WSS 3.0 Installed Reporting Service Add-in Machine 2 Reporting Service Sharepoint Object Model SQL Server Sharepoint and Report Server DB I have congigured Reporting Service for Sharepoint Integrated Mode adn Crea

  • Urgent help in BAPI

    Hello All, My requirement - A new field ZLGCYPO - CHAR(10) is added to existing EKKO structure. Now I want to update the field for a given PO using BAPI. Can anyone pls help me in solving this?

  • Bought Out materials Valuation doubts

    Dear All, By mistake our POs were created for a price higher than the actual price (Excise duty Part added twice - once along with Purchase price then again using tax code). GRN was made for this higher price and while booking the bill (MIRO) the sam