Related about query (I am in problem)
Hey friends ,I am using 9i release 1.I seen library cache mishes high and Now i want to know the query by which it is missing .I know i have to find out particular time and after that V$sql for query but i am not sure exactly How to do it.I am in problem .Can any body help me.
Thanks for Reply.tuning by taking all the statistics.Can i tune ,if i have all the necessary statistics.I mean to say that if i collect statistics from V$SYSSTAT,V$SYSTEM_EVENT,V$SQLAREA,V$FILESTAT,V$LATCH .Then what is wrong in Doing by "hard cord" instead STATSPACK.Can u clear me.
Thanks
Similar Messages
-
Problems about query filter (BEx).
Hello there,
I have some problems about query filter (BEx).
I have master data and I want to use attribute in this master data to dynamic filter in query(BEx).
But this attribute is key figure. I can't done it now. TT
Is this possible? If yes, could anyone advise how this is to be done?
Thanks in advance.Hi
In BEx there is option as 'Exceptions' & 'Conditions'. If you go in condition, you can specify range for key figure output. This is either predefined or by user selection. You create the condition as per your requirement & it will show you filtered data.
How to create conditions you will find easily on this site.
You can create as many conditions as no of filters you want. You can create these at query level also at report output level. -
Hello Everybody...
I have some prblem regarding to query.
In my problem i m not getting that which query i have to apply to get solution...
My problem is this
Basic tables are
Pa_Project_all
Project_id (Primary Key)
Project_type
Task_id
Pa_location
Location_id
Location_name
pa_tasks
task_id
task_name
pa_category
asset_category_id
cataegory_name
And here i have data in table Pa_Project_assests_all
project_id 1 2
asset_name TRUCK SUMO
location_id PARIS PARIS
Asset_category_id 333 555
Asset_unit 30 10
Cap_flg N N
Cap_date 12Dec 12Dec
Est_date 15Dec 18Dec
Cap_cost 1000 1000
IMPORTANT Table:
Pa_project_assets_All_audit_table
Project_id 1 1 1 2 2 2 2
Updated_by Xx aa bb Yy Xx Tt YY
Updated_date 10 11 12 10 10 12 12
Updated_time 2.00 2.05 2.10 2.0 2.05 2.10 4.00
Asset_name Tempo Jeep
location_id London
Asset_category_id
asset_unit 10
Cap_flg Y
Cap_date
Cap_cost 2000 1500
USER MAKE CHANGES IN ANY FIELD IN PA_PROJECT_ASSET_All are automatically insert one record in pa_project_asset_all_audit_table for every change.
Say if user changes only asset_name from ‘truck’ to ‘tempo’ one record is inserted in audit table with system current date,time and username.
Say if user changes only asset_unit, another record is inserted to my audit table
I want the report which should print me the original record and the last updated record
From audit trail table.. see here the last 2 record of audit table, the only cap_cost is changed from 1000 to 2000 and again from 2000 to 1500.
So my record of cap_cost 1500 will only show on my report and not record with 2000.
While all other record have different changes in different column,.so in case of project id 1 all three changes record should be displayed with original information from pa_project_assets_all.
While for project_id 2 only first 2 and 4 record will display.
Please remember that 3rd record of project id 2 should not be displayed because the same column is changed again with cap_cost.so only last changes in that particular column with respective project should be shown.
I m not getting which query i have to write so i get this kind of data.
Please any 1 have idea then reply me.Hi Upen,
1. If u want only 15 vendors to display as histogram every time for each plant then u have to restrain ur query output by filtering with appropiate characteristics.
or otherwise
2. On right clicking the chart area u can find a chart wizard from where u can select the cells of which the histogram is to be displayed.
Regards,
Dinesh -
Flex/cold fusion wizard & Visual Query builder has a problem
has anybody tried the cold fusion / flex application wizard in flex 3?
to get there follow these menu choices:
file new other cold fusion wizards coldfusion / flex application wizard
I previously installed cf8 and the rds query viewer works fine.
i simply choose from the following menus:
window other views... Cold Fusion RDS dataview
i was initially prompted for the rds password which i entered.
in the RDS Dataview, I can see the tables, columns, and data for all my existing datasources.
Unfortunately, when I use the COld Fusion/Flex application wizard,
I get to the page layout and design screen, add a page with the name artists, choose page type master, and click the Edit master page button.
Nothing happens when I click the Edit Master Page button. I followed the cf/flex tutorial exactly but there is no query builder.
I dont know if this is related but in the RDS query viewer, the Visual Query BUilder doesn't work.
I think this may be the problem (the visual query builder has a problem)
Unfortunately, how do I fix this problemalready found the answer
flex has to be run as administrator if using WIndows Vista
simply shut down flex, right click the startup icon, choose run as administrator, and the visual query builder runs fine.
Dont know why this occurs because you are always prompted for the rds password.
anyway, problem solved.
http://forums.adobe.com/message/228385#228385 -
About query Operator in find page??
hi all~
I hava a trouble about query operator.
for example:
In find page , there are some attribute for query.
attribute BRAND for query the vender's name,
Assume database has the follow data:
BRAND
=================
1.IBM
2.RedIBM
3.BLUEIBMCO
Case 1:When i input IBM in BRAND attribute and press Find,the result is :IBM
Case 2:When i input %IBM in BRAND attribute and press Find,the result is : RedIBM,BLUEIBMCO
How could I get above two result just input IBM??
I want to serch the value of BRAND that contain IBM whether it location at the frond or middle.Spray Lin,
I'm afraid that this time I do not quite understand what you are after.
When I understand you correctly, you are saying that the current behavior is not what I think it should be, for example IBM results in IBM and IBMblue. That is strange indeed.
Furthermore is it that when you try to find on IBM it should find everything with IBM in it? Said in other words, entering IBM should have the same result as entering %IBM%?
If that is the case, you can achieve that by adding an extra property to the find form bean: "wildcardUsage". Setting this to "surround" will result in a "%" being put in front and at the end of the value you enter.
You can look this up in the JHeadstart Developers Guide in the section Model-Aware Form Beans.
Jan Kettenis,
JHeadstart Team -
I can`t access to itunes stores. I red a lot of about these issue but the problems continous.
Um Fahad wrote:
I know that they can't use the 3G feature, because the ipad 2 Wi-Fi & 3G (Verizon) version doesn't have a micro-sim slot, but can they use with the WI-FI only?
Yes, they can use it for WiFi only. -
About Query returns no results?????
Has anyone had any luck getting an about(xxx) query to function as described in the documentation? I'm sure it works....but I can't seem to get anywhere.
I created a table "TEST_HELP". Columns Help_id, Help_Text
I put a handfull of records in the table, populating the column Help_Text with data such as
1, This is a document about animals.
2, This is all about the wonder world of dogs.
3, This is why fish suck.
4, Cats and why they think they rule the world.
5, Creature of the deep.
ok, next I created a small thesaurus with terms defined as:
animal
syn creature
nt dog
nt cat
nt fish
I load the thesaurus.
I create a CONTEXT index on TEST_HELP, utilizing LEXER preferences:
INDEX_TEXT= YES
INDEX_THEMES= YES
I can issue a contains query using the thesaurus operators SYN, NT and get the results I expect. However if I issue an about(animal) query I would expect to get all 5 records. (Based on the expansion of all SYN and NT)
So, can anyone tell me if my process is wrong? Are my expectations wrong? Does it even work?
Working with Oracle 9.2 on a windows 2000 server platform.
Thank you all for you time.Alright, I recreated the table, thesaurus and index (in that order)
and the about query appears to be working.
When I recreated the table I added more robust data to the help_text column.
(Don't know if this had anything to do with it or not)
Is there a specific order of creation that needs to be followed? table, thes, index -
About query not using extended knowledge base
Hello,
I compiled a small thesaurus to the knowledge base:
ctxkbtc -user dcenter/dcenter -name THES_PLACE
It contains:
GERMAN
USE FEDERAL REPUBLIC OF GERMANY
UF FRG
BT EUROPE
NT BAVARIAN
I have 2 record, 1 containing GERMAN, 1 containing BAVARIAN.
Field is indexed with a context index, and the index is synchronized.
I'm using 8.1.7.2 english.
Using an ABOUT operator, I always get 1 hit.
SQL> select count(*) from file_info where contains (places, 'about(BAVARIAN)') > 0;
The (9i) doc says:
When you augment the existing knowledge base with your new thesaurus, you query with the ABOUT operator which implicitly expands to synonyms and narrower terms.
How can I get the ABOUT query to expand to the narrower term in 8.1.7.2? Is this a bug, do I have to upgrade, or am I missing something?
ThanksHello.
Did you load the supplied english thesaurus as your DEFAULT thesaurus using the command line utility ctxload (or some other method)?
I had the same experience until I loaded the sample thesaurus in $ORACLE_HOME/ctx/sample/thes/. Now my ABOUT and SYN queries work as expected though I still have a concern about the incomplete nature of the sample thesauri (I'll open a new thread on that topic).
Hope this helps. -
PeopleSoft Query Access Services security problems, in other words does QAS
PeopleSoft Query Access Services security problems, in other words does QAS bypass PeopleSoft?
Rod,
Can you please post the entire contents of the dataserver summary screen...thanks.
Typically the "No suitable driver exists" error is due to trying to connect to an unsupported DB version with the driver. For example using the MSSQL 2000 driver to connect to MSSQL 2005, be sure that you have downloaded both the MSSQL 2000 (una2000.jar) and 2005 jars and have the proper classpaths specified.
Sam -
SAP B1 2007 A PL46
Hi All,
I have many questions about query generator :
1. It is possible to use or to call a stored procedure ? If yes, how can we implement this ?
2. I try to use this query :
declare @commercial integer
set @commercial = [%0]
declare @prjbegin nvarchar(20)
set @prjbegin = '[%1]'
declare @prjend nvarchar(20)
set @prjend = '[%2]'
SELECT T2.[DocNum], T2.[DocDate], T2.[CardCode], T2.[CardName], T3.[ItemCode], T3.[Dscription], T3.[Quantity] FROM [dbo].[OINV] T2 INNER JOIN [dbo].[INV1] T3 ON T2.DocEntry = T3.DocEntry WHERE T2.[SlpCode] =@commercial AND T3.[Project] >=@prjbegin AND T3.[Project] <=@prjend
but it don't work. How can we do to use this ?
Thanks for your help.
Best regards.
MichaelHi,
I try this but it's not working :
declare @commercial integer
set @commercial = (SELECT SlpCode FROM OSLP WHERE SlpCode=[%0])
declare @prjbegin nvarchar(20)
set @prjbegin = 'N000001'
declare @prjend nvarchar(20)
set @prjend = 'R000003'
SELECT T2.[DocNum], T2.[DocDate], T2.[CardCode], T2.[CardName], T3.[ItemCode], T3.[Dscription], T3.[Project] FROM [dbo].[OINV] T2 INNER JOIN [dbo].[INV1] T3 ON T2.DocEntry = T3.DocEntry WHERE T2.[SlpCode] =@commercial AND T3.[Project] >=@prjbegin AND T3.[Project] <=@prjend
I have an error that is : you must specify a table name where execute the selection ...
I think we can't use %0 and the statement DECLARE.
Thanks
Michael -
I have Lookout 6.5 running with Windows 7, the process has been running for about 2 months with no problems, but today the Citadel stopped working!
How could this have happened and what can I do to get it running again?Didnt realize there was a response, late getting back to you.
Save your process files outside of the NI progam directory (you should have external backups already right ). THey should not be deleted.
Any customizations to the lookout.ini and lookout.sec file may be lost.
Mike
Forshock - Consult.Develop.Solve. -
Doubts about Query Builder tool
Hi!
We are using database link and the developed querys have many schemas.
There is possible to use the Query Builder tool for multi Database schemas? How to do?
There is possible to create query in Query Builder tool using database link? How to do?
I would like to know about Query Builder tool in the our activies.
*If there is more information about it(Query Builder tool) or documentations, please talk to me.
Best Regards,
Priscila Brittohi.
try this [http://sourceforge.net/projects/sqleonardo/|http://sourceforge.net/projects/sqleonardo/]
maybe it can help you. -
The sound on all of my game apps and my alerts has stopped working. Still works for Netflix, Hulu, YouTube... Anything video related. Anyone else have this problem or know what I should do to fix it?
If you lose sounds for keyboard clicks, games or other apps, email notifications and other notifications, system sounds may have been muted.
System sounds can be muted and controlled two different ways. The screen lock rotation can be controlled in the same manner as well.
Settings>General>Use Side Switch to: Mute System sounds. If this option is selected, the switch on the side of the iPad above the volume rocker will mute system sounds.
If you choose Lock Screen Rotation, then the switch locks the screen. If the screen is locked, you will see a lock icon in the upper right corner next to the battery indicator gauge.
If you have the side switch set to lock screen rotation then the system sound control is in the task bar. Double tap the home button and in the task bar at the bottom, swipe all the way to the right. The speaker icon is all the way to the left. Tap on it and system sounds will return.
If you have the side switch set to mute system sounds, then the screen lock rotation can be accessed via the task bar in the same manner as described above.
This support article from Apple explains how the side switch works.
http://support.apple.com/kb/HT4085 -
Agian about an hour ago my problem is accidentaly deleted all content and sentting
again ,about an hour ago my problem is i accidentaly deleted all the setting and content of my iphone ,then i follow the suggestion of one of the guys, and the the phone is already responded to the itunes and restored, now my problem is the phone is not responding to the sim card that i use previously although it is working in my other iphone, pls HELP!
mine just did the same thing! im almost in tears and i cant figure it out. im downloading the update to see if that will help. i have reset it like 10 times and now it is plugged up to the computer showing an apple and turning back off. i love my iphone but i cant do this mess.
-
Hello! I am writing to inform you that about that you have a problem displaying your website in the browser.
In Yandex browser. I decided to tell you, because the site is not displayed correctly. As in the screenshot.apart from the fact there's no way I could have answered your question confidently, I was also not able to supply my non-answer within your very tight time constraints.
what happened? how'd you get on?
Maybe you are looking for
-
I am at 10.7, lion. I am trying to update xcode from 4.1 to 4.2. app store says I have an UPDATE available. when i click on it, it says the message in the thread topic. I have tried 1) , signing out of app store, ending itunes, re-sign-in 2) reboo
-
Unable to Communicate with Printer message, but still prints
I installed a new ENVY 4500 printer on my Windows XP system. and it there are two problems: 1. when I try to print, it tkes some time, then a message window appears with "unable to communicate with printer", but it still prints. I have uninstalled
-
I'm currently trying to upgrade my DB from 4.4.28 up to the current 4.7.25.NC mainly to just get in sync with the development cycle. I get the following crash running on linux 2.6.21 while trying to create an environment. The crash occurs whether the
-
Update to recent version of FF. Went to open today...wouldn't open. Went through the apps tab and opened there and its the 2.0 version!! where is the updated version with all the bookmarks, etc.??? This is on a Mac. == today == == User Agent == Mozil
-
Hello everyone, Please Help or Point me in a good direction!!! I am working with server 2012 DHCP . Under DHCP i have an ip address not a server name. ip is 169.254.99.88 and host server not showing up ( This IP is Not In My Subnet and server is set