Related eBook shown in audiobook-view

Today I made a new discovery while listening to one of my audiobooks.
It seems that iTunes has a way to relate certain books of the same author to its audiobook-counterpart.
As you can see in the screenshot below, this is indicated by a small icon next to the book, while having selected the "Audiobooks"-section nested in the "Books"-menu. I have noticed this behaviour in only one particular instance.
All my other audiobooks do not show their "eBook"-cousins from the "Books"-section.
I shall add that the audiobook has been imported into iTunes from an Audio-CD.
I have already checked if it has something to do with a misspelled Title or Author, but that does not to be the case.
Asuming that thereis some sort of meta data under the hood, that only iTunes knows about, the ways of this behaviour is a mystery to me...
Any kind suggestions from anyone on how to replicate this behaviour would be highly appreciated!

Display > Folder Location view will only show files (and their containing folders) if you've previously imported them into the Organizer, e.g. with File > Get Photos And Videos > From Files And Folders. Have you imported any photos yet into your catalog?
Note also that Folder Location view is buggy and often shows the wrong contents of folders, and with large catalogs (tens of thousands of photos), it is intolerably slow.
Regarding File > Watch Folders, it only imports photos that are added, deleted, or modified after you've started watching a folder.

Similar Messages

Output shown in Design view of Dreamweaver CS6 is not same as shown by the browsers

I have made a yoga website http://ballychohan.co/ in Dreamweaver CS6. I faced this problem while designing the website.The results shown by Design view in Dreamweaver is not correct. It made me very confused at the starting. Please tell me how to overcome this problem of DreamWeaver. Should I install a lower version of Dreamweaver ?

Bally Chohan wrote:
I have made a yoga website http://ballychohan.co/ in Dreamweaver CS6. I faced this problem while designing the website.The results shown by Design view in Dreamweaver is not correct. It made me very confused at the starting. Please tell me how to overcome this problem of DreamWeaver. Should I install a lower version of Dreamweaver ?
Does the page show correctly in a browser?
Dreamweaver design view is not very reliable at renedering designs exactly the way you want them to look, especailly if you use more of the complex and up-to-date css, now available. Dreamweaver is always playing catch-up in that area.

Incorrect Sizes Shown in List View

I've been running OS 10.3.9 for a while (old G4 can't run 10.4+) and something that's bothered me since the beginning is the way that OS fails to update the size of folders shown in list view and in the "get info" window. I can literally get info on a folder, close the "get info" window, move some files in or out of the folder and get info again and the size reported in the "get info" window will not change (ie, will be WRONG!).
In the past this has been a minor annoyance but now I am dealing with copying large amounts of data onto multiple external hard drives. I need to have accurate size and file counts so that I can see which folders are the same and which may have changed and need updating.
Has anyone found a solution for this bug?
(before someone suggests using backup software to make the copies, that's what I'm already doing but I want to be able to manually confirm that the files were properly copied. I've only used the backup program a few times and I don't entirely trust it yet)
thanks in advance

I have noticed something akin to this on Tiger when showing folder sizes in list view. My workaround has been to change the window view from list to icon to list again which seems to refresh the display.

"Search for" results not shown in list view

Hello,
I just installed Leopard a few days ago, and so far I'm very happy.
The ony oddity I noticed today was that "Search for" results (the default searches in the pane on the left side) are not shown in list view.
What happens is this:
- I open a finder window in list view.
- I click e.g. on "Search for" - "All documents".
- The status bar on the bottom of the finder window says e.g. "1789 objects", but the actual window is empty (although it has a very long scrollbar). If I click somewhere in the empty space, info for an actual file is shown - as if the files were there, just shown in white letters on white background. I can also type in the search field, and the status bar updates accordingly, but again, no files show up.
Icon and Coverflow views, however, do work.
- If I switch from Icon to List view, a file list is shown for the fraction of a second, then disappears.
This is not an end-of-the-world-bug for me, but still pretty annoying.
Any idea what might be the problem here? I have no exotic software installed that could cause trouble; just QuickSilver and the usual productivity apps.
Thanks!

The problem disappeared a few launches later . ..

How do I add a VM that has too many dependencies to be shown as "Map View " ?

When in Table View there is no option to add/remove a VM to an App or to create/delete an App.
f.eks. I added three VM's and created an App called "Convergion"
Two of those VM's can only be shown in "Table View" because of too many outgoing dependencies.
I accidentally removed the Third VM (the one that could be shown in "Map View") and now I have no way of:
1) Adding the third VM back to the App
2) Removing the App or
3) Remove the two remaining VM's from the App
So, to create the App again I have to call it "Convergion~1" or something similarilly stupid.
But two of the VM's now still belong to "Convergion" (the now "Zombied" App) as well as "Convergion~1"
Any ideas ?
P.S. I should be able to create an App and manually add the VM's needed from the vCenter Inventory (Search box or similar) without having to have a "Visual" contact in the Map View.
Some maps get huge and it's not very practical.
Consider this a feature request.

Hi,
I'm Galit from the QE team of VIN.
All the things that you've described are correct.
It is actually an edge case where the only VM, that the manual App can be managed from its Map view, was removed from the App.
The Manual App management is as designed, and may be changed in the future.
There are 2 ways to overcome this situation:
1.You can, as you stated, create another Manual App with similar name and remain with the "Zombie App".
2. To run a specific command that will remove the Zombie App from the DB.
Please note that option no. 2 involves using an API that we do not publish.
If you would like to use option no. 2 contact me in private and we will see about supplying the relevant commands to run in order to delete the "zombie" application.
Thanks,
Galit Gutman

Hidden network drives "home" and "net" shown in folder view Adobe Bridge CS5 / Lion Problem

Updated to Mac OS X 10.7.2 Lion and got this "problem":
The hidden network drives "home" and "net" shown in folder view Adobe Bridge CS5 (unlike in 10.6 Snow Leopard).
Normally these network drives are hidden (in Finder and other Apps) - but Adobe Bridge CS5 is showing them, despite "show hidden files" is unchecked in Adobe Bridge.
Not a dramatic "bug", but it also shouldn't be a big problem for Adobe Bridge engineers to solve this. My first question to the Adobe Support was answered like: "we don't know what Apple did change, so we cannot do anything". Hmmm, are you serious?
I tried to resolve that problem by myself but failed. So, if an Adobe engineer is reading this post: perhaps Adobe Bridge is ignoring the automounter master map (that was my approach to resolve it):
# Automounter master map
+auto_master                    # Use directory service
/net           -hosts                 -nobrowse,hidefromfinder,nosuid
/home                                        auto_home       -nobrowse,hidefromfinder
/Network/Servers               -fstab
/-                              -static
You cannot do anything to these folders, so it is not a serious issue, but, I mean, did someone at Adobe check compatibiliy with 10.7 and ignored this issue? If so, are there an other issues ignored?
But I guess, the compatibilty update for Bridge CS5 for Lion is Bridge CS6 - to be fair: I also have to say, that in general Bridge is running okay on Mac OS X 10.7.2 (but could be better, as always;)

Hi Curt Y,
thanks for your answer! Yes you' re right, I forgot to mention that ... before I posted here, I sent a bug report via the Apple Bug Report webpage about the issue ... of course, here are 2 parties involved.
I had a similiar problem once and I got a meesage back from Apple: "that it is a 3rd party problem, sorry" (it was about color management).
I am just a user and I often feel very strange about Apple's (topsecret) communication behaviour ... Whatever, what do I know about software engineering? - Right.
Maybe someone on this forum has an idea, because I'm afraid, thus it is not a serious bug, no one would take care about it in the next time (during my research I found an older post here on the forum about the same problem ...).
thanks for help in advance,
jobumac

Error messages shown outside the view/table.

Hi People,
      I have created a view & added an event 'Before saving the data' to it. So when we enter data into the view & try to save it, it will trigger the event & that will call a function module, which will check if the user entries are correct, If the entries are incorrect then i am showing an error message. The problem is, this error message is shown outside the view maintenence screen but inside the sm30 transaction! then I have to navigate back to my view maintenence screen. Kindly guide me on how to avoid this & make the error message appear in the same view maintenence screen.
Thanks & Regards,
Deepak

Hi,
      I have now used the event '05' For new entries. I am able to validate the entries, & show the error messages for invalid entry. Now when I enter valid input, still the vent is triggered & it shows me the error message. I am using the following code
FORM CHECK_BEFORE_SAVE.
    DATA: wa_total(1000) TYPE c.
    DATA: BEGIN OF ls_total,
            mandt type mandt,
            FUNCTIONAL_ID type /PRA/RESP_FUNC_AREAS,
            HIER_ID type /PRA/HIER_ID,
            DESCRIPTION type /PRA/HIER_DESC,
            CHANGE_FLAG type boolean,
           END OF ls_total.
LOOP AT TOTAL INTO wa_total.
    ls_total = wa_total.
    IF ls_total-functional_id IS INITIAL.
        MESSAGE E208(00) WITH 'Functional Area cannot be empty'.
    ENDIF.
ENDLOOP.
ENDFORM.
I see that when i enter the valid entry & this event is triggered, The global table for view TOTAL is not refreshed with new values & hence I still get the error. How do i refresh this TOTAL table?
Regards,
Deepak

Pictures with GPS-data will not be shown in list-view (PSE 11, Win7)

A lot of pictures of my collection do have GPS-data in EXIF-header. Sometimes they are shown on the world-map, sometimes not. In list-view they are never shown. The list-view knows only locations, which are matched with PSE.
The EXIF-input was made by two different tools (Holux GPS Software and Geosetter 3.4.16).
How can I get the list-view for the saved files without using PSE adding location?

Many modern cameras add GPS co-ordinates and these will usually show in the info panel of the Media module under Camera Data >> GPS
I guess your exif tools work differently to a camera. Are you able to embed the metadata into the image files before importing into PSE Organizer?

Rating / Label "Buttons" active, although not shown in Grid View

While I was investigating the reason for JPEG images being written back with no obvious changes applied to them (see also How to filter on Metadata Status "Has been changed"?) I noticed something I think is a bug:
Becaus it sometimes happened to me that I unintentially changed the rating for a picture because I wanted to click into the frame of an image to select it as the only image, I have set my Library View Options as follows for Compact Cell Extras (for a better description also see Grid View: Flags, Rating, Color Label read only? / Mark Images Read only?):
Index Number checked
Top Label checked with File Name
Rotation unchecked
Bottom Label unchecked with Rating and Label
Now, if I click into the area, where rating or color label would show (if shown), the rating of the images changes. So I am clicking on an option I don't even see ...
This was one of the reasons, why metadata in pictures sometimes would get updated without me knowing why. Anybody else who has experienced this behaviour?
Beat Gossweiler
Switzerland
P.S: My workaround now is to have Common Photo Settings shown in the bottom label.

Yes it's a bug. I see it on Mac platform.

IOS5.1 Exchange sync - birthdays not shown in Day view

iPhone 4s, IOS 5.1
Sync'd with Exchange using Outlook 2010 - Sorry, I don't know what the server version of Exchange is.
Outlook shows birthdays in my calendar, as having start and end as 12am, on the same day, correct recurrence patterns, etc.
If I look in iPhone Calendar, 'Day View', nothing is shown.
If I look in iPhone Calendar, 'List View', I can see them.
I generally live in 'Day View', I expect the birthdays to show up.
What can I do, if anything, to make the birthdays show up in 'Day view'?
Assistance greatly appreciated.

Calendar -> Day View - Move to a day that has birthdays (2 days ago or tomorrow), scroll down to the bottom, nothing. Attempt scrolling past top and bottom to no effect.
Calendar -> List View - Birthdays visible
Calendar -> Month View - Birthdays visible underneath the calendar

Why my tracks are not shown in Album view and Artist view, only Album Artworks are shown???

Dear,
I have not have this problem in the previous version of iTune. As soon as i upgraded it to iTunes 11, it happens.
The problem in here is all my songs, tracks are still here, i can see all of them in "songs view". However, when i change the view to Album View, and click into the Album artwork, there is no track there. When i double click into the Album Artwork, the first song of the album will be played normally.
Same story to the Artist View. Only the Album Artworks are shown and the rest is completely blank.
I have absolutely no idea what is going on here and obviously i am not satisfy with this new version.
Is there any way for me to fix this problem? Please help!
Otherwise i will need to use other software for music playing.
Regard,

Refer this article
The Microsoft.SharePoint.SPFieldCollection.AddFieldAsXml method
http://blogs.msdn.com/b/sharepointdev/archive/2011/01/20/why-do-my-new-list-fields-not-appear-on-the-new-edit-or-display-forms.aspx
Please remember to click 'Mark as Answer' on the answer if it helps you

Flashplayer10 afcs.swc, components not shown in Design view

Hi,
When I use the FlashPlayer10 swc nothing is shown in the Design View.
Is that bug ? isn't it just not working here ?

Hi, could you please try the followijg code and tell me if you can see the visual components in design view.
Make sure you try it with afcs.swc for Player 10 and Compiler set to 10.0.0
<?xml version="1.0" encoding="utf-8"?>
<mx:Application xmlns:mx="http://www.adobe.com/2006/mxml" layout="absolute" xmlns:rtc="AfcsNameSpace">
     <mx:RemoteObject showBusyCursor="true"
          id = "afcsService"
          destination = "afcsChat">
          <mx:method name="afcsAuth" result="afcsAuthResult(event)"/>
     </mx:RemoteObject>
     <mx:Script>
          <![CDATA[
            import mx.rpc.events.ResultEvent;
            private function getToken():void{
                 afcsService.afcsAuth();
            private function afcsAuthResult(e:ResultEvent):void{
                 auth.authenticationKey = String(e.result);
                  session.login();
          ]]>
     </mx:Script>
     <mx:Button x="10" y="10" label="Login" click="getToken()"/>
     <rtc:AdobeHSAuthenticator id="auth" />
     <rtc:ConnectSessionContainer autoLogin="false" id="session" width="100%" height="100%"
          authenticator="{auth}"
          roomURL="http://connectnow.acrobat.com/whomzour/videochat">
          <rtc:SimpleChat width="363" height="151" x="10" y="291"/>
          <rtc:WebCamera width="361.5" height="235" y="48" x="10"/>
          <rtc:AudioPublisher />
          <mx:List dataProvider="{session.userManager.userCollection}"
                  labelField="displayName" x="379.5" y="48" height="394" width="155"/>
     </rtc:ConnectSessionContainer>
</mx:Application>

Keep getting error message about Dynamically-related files when trying to view in "Live" mode

I'm very new to all of this, but I have been following Adobe tutorials to try and get everything working (Setting up a PHP development environment for Dreamweaver | Adobe Developer Connection) . The database connection test in this section goes through fine, but then when I go to view the final step, viewing comments.php in "Live View," I get an error across the top. I have played with it a bit, so the error message changes somewhat, but basically it tells me that I have dynamically-related files that can't be loaded. Currently, it is because they can't be resolved, previously, it was because they could not be discovered. (I tried the "Discover" option which failed, after which I resorted to the "Setup" option, in which I changed my root folder from htcdocs to htcsdocs/kitchengallery — where I had all my PHP and site files — and tried again to no avail. So then I changed the settings in MAMP to correspond with the change from htcdocs to htcdocs/kitchengallery. Still no luck).
I am using Dreamweaver CS6.
I'm not sure what information someone might need to help me dig deeper into this issue, but I'm all ears!

Usually this is caused when antivirus "Grabs" the drive to scan it in the background, and/or windows itself "Grabs" the drive for indexing and things. It also happens if you play a song off the ipod thru iTUnes, then stop it.
Usually rebooting will force it to let go

Documents or images are not shown in document viewer properly.

Hi Friends,
we are using sap ecc6.0 release 700.we have implemented document viewer functionality to one of our application.we have Adobe in our system.some times documets(pdfs) are shown properly in document viewer.but some times documents are not open in document viewer.in this case if restart the work station PC ,document viewer working properly.so we have to know any ways to correct the bug without restart the workstation PC.
please suggest any ways to correct it.

Hi Venkat,
i am not sure about it, but lets a try ask to your basis consultant for the latest gui .i.e. 7.3 with patch level 8, use the latest GUI and then see , is still you are getting those problems, please revert with your answer.

Album art shown in grid view

In the new grid view which shows the album art for artists, is there a way to set the image shown for the artist, like you press space to choose the picture shown in iPhoto?
It's annoying at the moment becasue I use it in artist mode but some artists with more than one album show the image for a compilation that they are on rather than one of their albums. Eg, under Coldplay, the artwork shown is a Now album, rather than say Viva la vida. Can I change the album shown as the main image?
Thanks

Ok, I've been playing around with iTunes 8 and have found the answer myself. If when in Grid view with more than the one album for the artist, show the album art required and right click and choose Set Default Album Artwork and it will change it to this. Alternatively choose Get Info whilst on the grid view and it will allow you to paste an artwork in here which it will use as a default.
Hope this helps anyone else wanting to do a similar thing!

Related eBook shown in audiobook-view

Similar Messages

Maybe you are looking for