Related Link doesnt work with Multiple Helpsets

Robohelpx4.1 is used as the authering tool to generate our help files in OHW format. We have different projects creating one helpset file each and it is merged in the ohwconfig.xml. Each helpset has its own link,map,index,Toc files created by robohelp. The link file created by robohelp has the linkitem id created in seq order and names as Link01,Link02,Link03..... .
The link file of other helpset also has the same structure and ids. (The linkitem id's are not unique across the helpsets)
But the related link doesnt work properly when more than one helpset is configured, for both the options of combined book and separate books. Links get mixed up and shows topics of other links.
Is there anyway this can work ?

Link Problem with Multiple Helpsets

Similar Messages

  • How do I get "mailto:" links to work with my web based email?

    I use the web based email from godaddy.com called workspace. I can't get the mailto: links to work with firefox. I did find a code that makes the correct compose window to open up but it doesn't input the email address.
    Also, a related problem with my email is that you can't copy an email address and then paste the email address into the email. Pasting is not allowed with firefox but works ok with Internet Explorer

    Welcome to the Apple Community.
    Try adjusting the dolby digital setting.

  • Reg:working with multiple windows in webdynpro-abap

    Hi ,
    How can we create multiple windows and how can we link them...
    suppose we have 3 fields on first screen .how to move the data from the first screen to second screen..
    Thanks & Regards
    Suman Puthadi

    Hi
    As per your Subject you are looking for "working with multiple windows in webdynpro-abap" and for abap there is a different forum. Web Dynpro ABAP
    Hope its clear to you...
    Even you can read this post when ever you get time Read before posting
    Regards
    Ayyapparaj

  • Maintain performance while working with multiple shape layers (~50 )

    Hey guys, I've been working on some projects lately where I need to animate a lot of shape layers cascading, arraying, with various animation properties. When I get to the point of using 30-60 or so shape layers, and they're all doing some kind of scale, position, etc. animations, my computer slows to a complete crawl. This then forces me into using a single shape layer and the repeater functions. These can work well sometimes, and don't hamstring the flexibility too much, UNTIL you need to incorporate varying colors. At that point, I usually switch my shape layers to masks and place a layer below with varying colors as needed. The shape animations then reveal those colors, but this doesn't work for a complex object that in itself requires many colors. Sooo...
    What kind of workflows do you all have for working with multiple semi-complex objects at once? I figure I must be missing something, because this has gotten really limiting. Is everyone just working with 256GB of RAM?
    FYI, my computer specs are:
    2 x 2.66 GHz 6-Core Intel Xeon
    32 GB 1333 MHz DDR3 ECC
    ATI Radeon HD 5870 1024 MB
    OS X 10.9.4 (13E28)
    Thanks!!

    Pre-comping can speed up your previews if you are using disk cache, but nothing will speed up  your first ram preview or a ram preview after a keyframe change except a better optimized system. All it takes to slow things down is one effect or a footage file that causes AE to start consuming memory and processor power.
    As a test I just created a gradient filled rectangle, added rotation keyframes, duplicated the layer so I have 64 copies on my Mac Mini and tried a ram preview compared with the same comp with only 1 layer. Almost no difference in the time it took to preview 10 seconds. Threw in a scale transform for all layers and again, not much difference between one shape layer and 64. To make things much harder I change the rectangle to a Polystar and animated everything in the Polystart transform properties, set up a composition with 128 duplicates and a comp with one layer. 2.5 seconds for a ram preview at quarter rez for a single layer, 10 seconds for a ram preview for 128 layers. That's more than acceptable to me for a two year old Mac Mini with 16 gb of ram. Increasing the zoom factor to 50% with Resolution set to Auto doubled the ram preview time which was still acceptable.
    This makes me wonder what else is going on in your composition. Any effects or other things going on? Have you optimized your system for maximum performance? There are links with suggestions for doing that all over this site as well as the Adobe recommendations found here: Optimizing After Effects Performance

  • Latest Jdeveloper link doesnt work

    Latest Jdeveloper link doesnt work.
    http://download.oracle.com/otn/java/jdeveloper/1013/jdevstudio1013.zip
    errors out .
    With page connot be displayed

    Hello,
    Thank you for reporting this.  It has been fixed and the installer is now downloading.
    Maria

  • I want to resigne an annual engagement ? how to do ? it doesnt work with " more help"! turn turn turn turn over and over

    i want to resigne an annual engagement ? how to do ? it doesnt work with " more help"! turn turn turn turn over and over

    This is an open forum, not Adobe support... You need Adobe support to cancel a subscription
    -start here https://forums.adobe.com/thread/1703848
    -or by telephone http://helpx.adobe.com/x-productkb/global/phone-support-orders.html
    --and two links which may provide more details, if the above links don't help you
    -http://helpx.adobe.com/x-productkb/policy-pricing/return-cancel-or-change-order.html
    -http://helpx.adobe.com/x-productkb/policy-pricing/cancel-membership-subscription.html

  • Working with Multiple Files in Workspace Layout

    If I was working with multiple files in the workspace layout, they each used to be available for selection from a tab.  Now I can either cascade the files horizontally or vertically - but not have them appear in a tab across the top of the workspace layout.
    Does anyone know how to set the workspace to present multiple files in tabs?  I have CS3.

    Tanya,
    This may not help, but the times when that happens to me is when I go too fast and some operations haven't finished. I then try to select a file that hasn't completed and the file I select is in the process of having the data updated. The worst is when it is trying to render as I am doing something.
    I hope this helps some.
    Mel

  • Working with  multiple layers in CS 3 ?

    In order to work with multiple layers in cs3, I first need to open few images to work with,and when I open few images it only shows last image that I opened.Frist images can't be seen in workspace, and when I open new document I can't see not even one photo I opened?

    try tapping the F key a few times until you get to the screen mode that allows you to see all image windows.

  • I book doesnt work with power cord only

    Hello. I was just using my ibook g4 and shut it down. When i tried to turn it back on it worked for about 5 minutes then it shut off. I tried taking out the battery and holding down the power button for 5 seconds among other things. I gave up and borrowed a friends battery, he has the same model as me and that battery doesnt work either. I tried just using the power cord only and that doesnt work either. Do i need to take it in to a professional? I've tried just about everything.

    Hey Caesar and Welcome to Apple Discussions,
    So your header reads:
    "i book doesnt work with power cord only "
    Is that right? Will it run only on the battery?
    If so this is from the manual:
    "The computer runs with battery, but not with the power adapter plugged into
    wall outlet
    1. Try known-good power outlet.
    2. Try known-good power adapter and power cord.
    Note:
    Verify that power adapter connector glows amber or green. If the power
    adapter light is green, turn over the computer and press the battery button. The
    battery lights should glow green and stay on if the power adapter is operating
    correctly.
    3. Reset the power manager by pressing the key combination Control-Option-Shiftpower.
    Warning: Make sure you do not hold down the "fn" key when resetting the
    power manager.
    Warning: Resetting the power manager means you will also need to reset the
    date and time (using the Date & Time control panel).
    4. Replace DC board.
    5. Replace logic board."
    and it would help to know exactly which iBook you have but this is pretty generic.
    Richard

  • Does WRT54GP2 work with multiple ViOP providers ?

    My question is, Does WRT54GP2 router work with multiple ViOP providers ? Can I use it with a ViOP provider other then Vonage ?
    Thanks, John

    Yes you definately can , all you need is a VOIP adapter that supports SIP . It's a standard protocol and is supported by all routers and VOIP providers

  • Problem when working with multiple sequences

    Dears,
    In order to make life easier (I am currently working on a rather long project), I work with multiple sequences, one per chapter.
    My problem: I named one sequence "assembly sequences" in order to add the various sequences. I dropped the sequence no 1, then no 2. All works fine, beside that when playing the sequence no 2, I see two black lines on top and bottom of the screen for the all length of the sequence. Which is not the case when I click on the sequence itself and play it independently.
    Any idea how to solve this ?
    Thanks
    Nic

    Thanks, what happened is that :
    1st sequence is like this : Frame size 720x576 pixels, video rate 25fps, Compressor DV-Pal. And I think it is the one appropriate for me and my country.
    2nd sequence is like this : Frame size 720x480 pixels,
    video rate 29.97 fps, Compressor DV-DVPRO-NTSC.
    I think I should change the second sequence setting, but can I do it after all the work I have done, and continue making a 3rd, 4th and so on ?
    Tx for your precious help,
    Nicolas

  • Why is the fb video call doesnt work with macbook?

    why is the fb video call doesnt work with macbook?

    Hi
    Just to correct GerdW - the vis of a polymorphic vi do not have to have the same output.
    Have a look at the vis I attached. I just pass a dbl to a polymorphic vi and get a dbl in one vi and a string in the other.
    The real problem is that the vi has to be set to the necessary type. If there are different inputs you just can wire them to the polymorphic vi, but this does not work with the outputs, so you have to set the type.
    Hope this helps.
    Thomas
    Using LV8.0
    Don't be afraid to rate a good answer...
    Attachments:
    Polymorph.zip ‏14 KB

  • Why is scrolling not working with multiple youtube embeds layed out vertically in a stack on one page?

    Why is scrolling not working with multiple youtube embeds layed out in a stack on one page?

    Hi ,  
      This is a sort of performance issue , because your program takes more than the max time set for the program to execute in foreground.
    There are many stuff in program which will hamper your performance.
    I will list down a few
    1. SELECT *
    FROM konp
    INTO CORRESPONDING FIELDS OF TABLE konp_itab
    FOR ALL ENTRIES IN a363_itab
    WHERE knumh EQ a363_itab-knumh
    in this statement you are using for all entries a363_itab , but before this statement you are not checking if the table has any entry or not , please do remember that for all entries has this characterstic , that if you internal table does not contain any record , then all the records are selected from the database table. So in this case if you table a363_itab is empty , so what you want is no data must be seelcted from table konp , but what will happen is all the records in KONP will be seelcted.
    2. While retreiving data you are using seelct * even though you do not require all the fields , an example is
    <b>SELECT *
    FROM mkpf
    INTO CORRESPONDING FIELDS OF TABLE mkpf_itab
    FOR ALL ENTRIES IN mseg_itab
    WHERE mblnr EQ mseg_itab-mblnr.</b>
    in this your internal table contains only 2 fields
    <b>mblnr LIKE mkpf-mblnr, "Number of Material Document
    bldat LIKE mkpf-bldat, "Document Date in Document</b> , but to get these 2 fields you are selecting all the fields of the table.
    3. In select you are using into corresponding fields of table , it is not a good practice., so please avoidd it.
    Please understand that you must try to reduce the access to your database tables and try to keep it minimal , because this same thing may happen becasue data in DEV is very less compared to the volume of data in production , so a program working in DEV will take much more time in PRD if not written properly and may result in timeouts , as in your case.
    Please try to make chanegs to the prorgam and see if it works.
    In case you have more queries , please do revert back.
    Regards
    Arun
    *Reward points if replay is helpful

  • When working with multiple artboards, are there separate layers panels for each artboard?

    Just started working with multiple artboards in ai but have read nothing about the layers panel, whether you use one layers panel for all the artboards or if the layers panel is duplicated so there is one for each artboard.

    I don't really understand your problem, but I've had headaches with managing a GUI before (as many programmers have, I'm sure).
    My best advice, if the scheme your using to build and manage a GUI is too confusing for you, the programmer, to easily understand/manage, change the scheme. Even if this means recoding a good deal of your program (though, hopefully, you've kept the GUI as seperate from your functional code as possible) it should be worth it.
    Perhaps a clearer explination of your problem would help better illustrate your problem?
    -Rejun

  • Seagate 1.5TB doesnt work with mac

    hi, i have a seagate external hard drive 1.5 TB, i generally use it for my windows laptop. now i bought a mac and it doesnt work with my mac. Am i doing some thing wrong..?

    Are you planning on using the drive with Windows? If no, then use Disk Utility in Applications/Utilities to reformat the drive. Formatting erases contents on a drive. Copy the data to another source before formatting.
    Format the external drive as Mac OS Extended (Journaled) - Partition Map Scheme: GUID
    Select Drive (top name) then click on Erase tab.
    Under Format select Mac OS Extended (Journaled)
    This should format as GUID when erasing but sometimes you need to click on an Advanced tab and select GUID.
    If you do plan on using the drive with Windows machine, format on Windows machine as exFAT.

Maybe you are looking for