Related notes in SAP note
Hi All,
While implementing a SAP note, hope it is mandatory to implement the pre-requisite notes.
Is it also necessary to implement the related notes mentioned in the note?
Thanks in advance!
Regards
Vidhya
You only have to implement the pre-requisite notes, not the related notes. These are often just referring to notes that resemble the ones you are implementing, meaning they share some similar error for example.
Similar Messages
-
Dear experts
Can Anyone kindly clear me the difference between
1.OSS note and SAP Note.
2.SAP Patch and Support Packages.
Thanx in advance
Regards
G.Reddy.OSS Note and SAP Note are the same thing.
Support Package / Support Package Stack refers to a group of corrections and/or enahcnements which include a group of OSS Notes, and changes to multiple components that SAP has tested as a group and recommends be installed together.
I think Patch may be a little more ambigous. For some, they might mean Support Package when they use the term Patch, or maybe even an OSS Note. SAP also refers to updates to some components as Patches, e.g. they release database patches, and with BW, the BW SAPGUI Addon is also sometimes referred to as the Front End Patch. -
Help for not released SAP Note 1179482
Dear all,
I have some problems with transaction CLOCOC (Message TK430 - Cient & has statut 'not modifiable').
I found solution using SAP Note 1179482 but this SAP Note is not released and no more available.
We do not want to use tranport request for CLOCOC transaction.
Some still got this SAP Note or some information about the solution?
Thanks.
DavidHi David,
You'll new to create OSS incident and ask SAP to release this note for your installation.
Regards,
Szymon -
Hi friends!!
May i know is there any table that gives any info about the NOTES .Hi deepika ,
Pls see the following tables
CWBNTVALID Validity table for Notes
CWBNTSTXT Short text for a Note
CWBNTMSG SAP Notes Message Log
CWBNTHEAD Header table for OSS Notes in customer systems
CWBNTGATTR Table for Any Note Attributes
CWBNTDATA Compressed data for OSS Notes
CWBNTCI Assignment of Note to correction instructions
Regards
Byju -
Can not start SAP (J2EE) -- Oraarch was full
Hi Everybody,
i can not start the sap system because thre is no space left under /oracle/<instance>/oraarch.
In /oracle/<instance>/oraarch i have the following files:
D05arch1_347_651422181.dbf
-rw-r----- 1 orad05 dba 43980800 May 9 23:00 D05arch1_348_651422181.dbf
-rw-r----- 1 orad05 dba 43980800 May 9 23:00 D05arch1_349_651422181.dbf
-rw-r----- 1 orad05 dba 43980800 May 10 20:00 D05arch1_350_651422181.dbf
-rw-r----- 1 orad05 dba 43980800 May 10 23:00 D05arch1_351_651422181.dbf
-rw-r----- 1 orad05 dba 43980800 May 10 23:20 D05arch1_352_651422181.dbf
-rw-r----- 1 orad05 dba 43980800 May 11 23:00 D05arch1_353_651422181.dbf
-rw-r----- 1 orad05 dba 43980800 May 11 23:00 D05arch1_354_651422181.dbf
-rw-r----- 1 orad05 dba 43980800 May 12 20:00 D05arch1_355_651422181.dbf
-rw-r----- 1 orad05 dba 43980800 May 12 23:00 D05arch1_356_651422181.dbf
-rw-r----- 1 orad05 dba 45900800 May 12 23:21 D05arch1_357_651422181.dbf
can i delete all files which was not created today or copy them to an other place? And how can i avoid this problem for the next time?
regards,
Seed
Edited by: seed_mopo on May 13, 2008 11:38 AMHi Seed,
archiver stuck ? You're serious ...? That kind of problem really should never appear...
Well perhabs it's a good idea to read some notes like:
SAP Note 14562 BRARCHIVE - archiver stuck
SAP Note 391 Archiver stuck
and the documentation [Setting Up Archiving|http://help.sap.com/saphelp_nw04/helpdata/en/65/96f1e4a6974512962197918624e1c5/frameset.htm].
If you have already done everything mentioned in the notes and the problem still appears, I propose you check for errors in the brarchive logs and the Oracle Alert.log.
KR Lars -
Hi Folks,
1.Will there be a SAP Notes even for Script too or SAP will provide a new script when there is a change in the layout,say for changes in J1INCERT-CIN.
2.We are currently working on 4.7c and we generally apply notes as and when an error arises in a Standard transaction,by checking all the possible solutions like searching in SAP Market Place for SAP Notes availablity,if any.Won't SAP will notify all its customers regarding the SAP Notes to be implemented based on the version rather than we searching in SAP Market Place when an error arises.May be the query sounds crude but what I had experienced here is there are lot many SAP Notes that are pending and not implemented in my system and now we are finding it tough to collate
Kindly let me know,
Thanks,
K.Kiran.Amit,
As there is a change in SAP Script Layout for J1INCERT we had copied the script and done the changes manually(as we are not aware of that there is a SAP Note available) both in the Script as well as the Program and it is fine.We had tough time in terms of allignment when changing the Script :-).
Kewl, the Notes even provides the Script.But how to open a file type of SAR.Gone through the notes 13719,seems we need to take the help of Basis Team.Nice if anyone here can provide me some info related to the downloading a file from SAP Note like SCRIPT.
Thanks alot,Amit for the information on "OSS:1046758,891923 for J1INCERT"
Any idea about the 2nd query?
Vivek,check the OSS notes mentioned by Amit.
Thanks,
K.Kiran. -
SAP note related to QA08 transaction
Hi all,
I am trying to activate inspection type using QA08 Transaction (for which we have written a BDC). The program runs successfully but the client says there is an internal error due to which the subsequent transactions are affected.
We are pretty sure that our program has no bugs.
Can anybody let me know are there any SAP Notes related to this Transaction.
Thankyou in advance,
LakshmiHi,
Use follwonig transactions
OSS1 / SNOTES.
You can always go to http://service.sap.com/
and search for notes.
Regards,
Shashank -
REQ: List of SAP notes related to QM
HI,
Can anyone help me with a list of SAP notes name/no. related to QM?
Thanks in advance!Swarnanli
its really very difficult to get such list directly.You have to get the Market place lo-gin & check relevant to QM in QM category"Its very Huge list -
Price List Error in Bill of Materials in relation to SAP Note 1056208
Hi Experts,
I have uploaded the Bill of Materials --both the Header and Lines using DTW successfully but when I try to update the Product Price of the Parent manually in the Bill of Materials, this error occurs:
"Variation between number of price lists and number of price lists for items"
I have also tried running the script provided in SAP Note 1056208 to check if there are any inconsistencies in the Price List records but there is none. The number of records in both tables are the same.
We have 3 levels of Bill of Materials (FG, WIP1, WIP2). I need to update the Product Price of WIP2 first so that its price will appear in the line items since it is a component of WIP1.
I hope you could help me with my problem and I would appreciate your prompt replies.
Thank you very much!Hi!
In BOM u will find a Orange Color Drop Down Arrow @ Right-Bottom Corner. You have to click on that to generate Price for your Parent based on the Child.
Select the Approp Price List in Header of BOM and in Row Level. Update prices for Child Items, now Follow the above step. -
Related to SAP Notes Implementation
Hi Guys,
I have a dbt and need a clarification on SAP Note.
How I will be able to know by seeing the SAP Note or how I can judge my self that either (SAP Note) should be implemented thru manually or using SNOTE transaction.
Regards,
Ravi Ganjihi Ravi,
SNOTE Transaction is available from 4.6C version owards only ... and to know whether you have to apply it manually or through SNOTE you will have to confirm it by the user ... for details refer
OSS Note
http://www.sappoint.com/basis/.pdf
http://www.sap-img.com/basis/oss-notes.htm
http://www.sap-img.com/basis/manually-applying-the-oss-note.htm
Regards,
Santosh -
SAP Note 1005901 related to MM
Hello friends,
Can anyone explain me the below sap note 1005901 (MM module , tcode :- MB5B). I am not able to understand perfectly...
16.08.2010 Page 1 of 4
SAP Note 1005901 - MB5B: Performance problems
Note Language: English Version: 3 Validity: Valid Since 05.12.2006
Summary
Symptom
o The user starts transaction MB5B, or the respective report
RM07MLBD, for a very large number of materials or for all materials
in a plant.
o The transaction terminates with the ABAP runtime error
DBIF_RSQL_INVALID_RSQL.
o The transaction runtime is very long and it terminates with the
ABAP runtime error TIME_OUT.
o During the runtime of transaction MB5B, goods movements are posted
in parallel:
- The results of transaction MB5B are incorrect.
- Each run of transaction MB5B returns different results for the
same combination of "material + plant".
Other terms
MB5B, RM07MLBD, runtime, performance, short dump
Reason and Prerequisites
The DBIF_RSQL_INVALID_RSQL runtime error may occur if you enter too many
individual material numbers in the selection screen for the database
selection.
The runtime is long because of the way report RM07MLBD works. It reads the
stocks and values from the material masters first, then the MM documents
and, in "Valuated Stock" mode, it then reads the respective FI documents.
If there are many MM and FI documents in the system, the runtimes can be
very long.
If goods movements are posted during the runtime of transaction MB5B for
materials that should also be processed by transaction MB5B, transaction
MB5B may return incorrect results.
Example: Transaction MB5B should process 100 materials with 10,000 MM
documents each. The system takes approximately 1 second to read the
material master data and it takes approximately 1 hour to read the MM and
FI documents. A goods movement for a material to be processed is posted
approximately 10 minutes after you start transaction MB5B. The stock for
this material before this posting has already been determined. The new MM
document is also read, however. The stock read before the posting is used
as the basis for calculating the stocks for the start and end date.
If you execute transaction MB5B during a time when no goods movements are
posted, these incorrect results do not occur.
Solution
The SAP standard release does not include a solution that allows you to
16.08.2010 Page 2 of 4
SAP Note 1005901 - MB5B: Performance problems
process mass data using transaction MB5B. The requirements for transaction
MB5B are very customer-specific. To allow for these customer-specific
requirements, we provide the following proposed implementation:
Implementation proposal:
o You should call transaction MB5B for only one "material + plant"
combination at a time.
o The list outputs for each of these runs are collected and at the
end of the processing they are prepared for a large list output.
You need three reports and one database table for this function. You can
store the lists in the INDX cluster table.
o Define work database table ZZ_MB5B with the following fields:
- Material number
- Plant
- Valuation area
- Key field for INDX cluster table
o The size category of the table should be based on the number of
entries in material valuation table MBEW.
Report ZZ_MB5B_PREPARE
In the first step, this report deletes all existing entries from the
ZZ_MB5B work table and the INDX cluster table from the last mass data
processing run of transaction MB5B.
o The ZZ_MB5B work table is filled in accordance with the selected
mode of transaction MB5B:
- Stock type mode = Valuated stock
- Include one entry in work table ZZ_MB5B for every "material +
valuation area" combination from table MBEW.
o Other modes:
- Include one entry in work table ZZ_MB5B for every "material +
plant" combination from table MARC
Furthermore, the new entries in work table ZZ_MB5B are assigned a unique
22-character string that later serves as a key term for cluster table INDX.
Report ZZ_MB5B_MONITOR
This report reads the entries sequentially in work table ZZ_MB5B. Depending
on the mode of transaction MB5B, a lock is executed as follows:
o Stock type mode = Valuated stock
16.08.2010 Page 3 of 4
SAP Note 1005901 - MB5B: Performance problems
- For every "material + valuation area" combination, the system
determines all "material + plant" combinations. All determined
"material + plant" combinations are locked.
o Other modes:
- Every "material + plant" combination is locked.
- The entries from the ZZ_MB5B work table can be processed as
follows only if they have been locked successfully.
- Start report RM07MLBD for the current "Material + plant"
combination, or "material + valuation area" combination,
depending on the required mode.
- The list created is stored with the generated key term in the
INDX cluster table.
- The current entry is deleted from the ZZ_MB5B work table.
- Database updates are executed with COMMIT WORK AND WAIT.
- The lock is released.
- The system reads the next entry in the ZZ_MB5B work table.
Application
- The lock ensures that no goods movements can be posted during
the runtime of the RM07MLBD report for the "material + Plant"
combination to be processed.
- You can start several instances of this report at the same
time. This method ensures that all "material + plant"
combinations can be processed at the same time.
- The system takes just a few seconds to process a "material +
Plant" combination so there is just minimum disruption to
production operation.
- This report is started until there are no more entries in the
ZZ_MB5B work table.
- If the report terminates or is interrupted, it can be started
again at any time.
Report ZZ_MB5B_PRINT
You can use this report when all combinations of "material + plant", or
"material + valuation area" from the ZZ_MB5B work table have been
processed. The report reads the saved lists from the INDX cluster table and
adds these individual lists to a complete list output.
Estimated implementation effort
16.08.2010 Page 4 of 4
SAP Note 1005901 - MB5B: Performance problems
An experienced ABAP programmer requires an estimated three to five days to
create the ZZ_MB5B work table and these three reports. You can find a
similar program as an example in Note 32236: MBMSSQUA.
If you need support during the implementation, contact your SAP consultant.
Header Data
Release Status: Released for Customer
Released on: 05.12.2006 16:14:11
Master Language: German
Priority: Recommendations/additional info
Category: Consulting
Primary Component: MM-IM-GF-REP IM Reporting (no LIS)
The Note is release-independent
Thank you.SAP suggests you to build a pre-calculated data table and a z-report to solve the problem of performance getting poor of transaction MB5B. They give suggestions to write programs that fill the new database table and a report to substitute MB5B transaction
First download and install in development or sandbox system the transport request of [Note 32236 - Incorrect stock qty or stock value in material master|https://service.sap.com/sap/support/notes/32236] and check the included reports which are very similar.
Regards,
Raymond -
Hi,
I am currently working on 4.6C, I need to download the RSWUWFML2 (latest version) program, so which SAP note should I use?
Thank You,
SB.Here is an idea: search SAP notes for RSWUWFML2.
-
Doubts relating to SAP Notes?
Dear All,
Being a new bee to ABAP environment, I am eager to know some information regarding SAP Notes.
often I am hearing that SAP notes have to be implemented for some programmes. Why we implement SAP notes, and how we add sap notes to the programmes.
If I want to add a note to Purchase Order process, under which transaction can I add, does it change any standard behavior of the system?
What is Development, how does it differs with standard sap process?
under which transaction all this developments take place,
How can I see all developments done by a consultant in a project?
Please clarify my doubts and your help will be highly appreciated
thank you
Raghu RamHi,
Please do not create multiple threads for same question.
Your question has been answered in ABAP general forum.
How and Where SAP Notes have to be implemented? -
Sap notes for 103 movement type and 105 movement types in sap
Hi all,
Please let me know if there are any sap notes for 103 movement type and 105 movement type in sap as soon as possible
points will be awarded.
thanking u in advance,
srinivas.There are many SAP notes related to these movement types e.g 514609,750836,
533833, 808029, 317823,etc.
You can search them at http://service.sap.com
Regards,
Amit -
Performance credit master data (FD32)--SAP Note 705317
Hi,
When running the FD32 tranasaction,I am changing the credit account and saving the transaction...it is taking quite a long time and going for dump....TIME_OUT error.
The appropriate notes for this problem are 705317 and 9937.
I shall give the details details of the note.
SymptomLong runtimes occur for the reorganization of credit data in SD documents.
This reorganization can occur in two situation:
- You start report RFDKLI20.
- You create or change credit master data in Transaction FD32.
Reason and PrerequisitesIn the credit management, you change assignments in Customizing or create or change
credit master data. The transfer of the changed settings into existing SD documents
requires a reorganization of these documents.
The reorganization is triggered from Transaction FD32 or using report RFDKLI20. Since
the relevant partner function in the credit management is the payer, all open sales
documents for a payer are selectedfor the reorganization.
The selection is performed within function module SD_CREDIT_RECREATE, which is called
from both Transaction FD32 and report RFDKLI20.
The documents are selected according to one of the two following options:1. Partner index VAKPA
The relevant documents are selected via partner index VAKPA. In index table VAKPA,
the system updates all SD documents for a customer number in dependency on the
partner function. All documents for a payer can be determined using index table
VAKPA.
CAUTION: Partner index VAKPA is only updated if the corresponding partner
functions and transactions are activated in Customizing table TINPA. Table TINPA
does not provide any update for the payer partnerfunction in the standard system!
2. Document table VBPA
If the update for the payer is not active in table TINPA, the relevant documents
are selected via application table VBPA. Table VBPA contains the used partners
(customer numbers) for SD documents.
The access to table VBPA with the customer number of the payer requires a long
SAP Note Nr. 705317 07.02.2008 Page 1
runtime because the customer number is not a key field in table VBPA. It might
result in a TIME_OUT.
Solution
Due to the technical conditions described above, there are two possible solutions for
runtime problems in Transaction FD32 or with report RFDKLI20:
1. Activate the update of index table VAKPA for the payer partner function:
Activate the update of index table VAKPA for the payer partner function by
creating an entry with transaction = 0, partner function = RG in table TINPA. You
can use Transaction SM31 for that.
Subsequently, a reorganization of index table VAKPA is absolutely required!! You
can execute the reorganization with report RVV05IVB. Note that all existing SD
documents thus also those ones already closed are indexed again by this report.
Depending on the number of your documents in the system, this can result in a
runtime which is correspondingly long. Therefore test this beforehand in a copy of
your production system!
2. Create a database secondary index for table VBPA:
If a reorganization of index table VAKPA is not possible or not wanted, you can
optimize the access via document table VBPA. For that, create a database secondary
index for table VBPA.
We cannot provide a general recommendation on how you have to define the secondary
index in detail. This basically depends on your dataset.
Use the SQL trace with Transaction ST05 in order to analyze the access onto table
VBPA within function module SD_CREDIT_RECREATE. Then define a suitable database
secondary index for table VBPA according to your analysis results.
For example, you could create the secondary index for VBPA fields KUNNR and PARVW.
Test the new secondary index by creating an SQL trace with Transaction ST05 again
in order to check the effectiveness of the database access and the runtime.
Also take the related notes into account.
Use Note 99937 to avoid the automatic reorganization - and thus runtime problems - in
Transaction FD32. Note that this does not solve the runtime problem during the
reorganization in general, but shifts it to RFDKLI20 which you can schedule as a job.
Thus, you are not disturbed by the runtime problem.
Please can anyone help me as to in which table and what fields i need to take to create secondary index.Thank you,
madhu.Hi
Instead of creating Indexxes u contact basis to increase the the time limit for the execution
Regards
Shiva
Maybe you are looking for
-
Doing PR in PS, had error regarding exchange rate.
while creating PR (External activity) i encountered this error. Error: There is no exchange rate for exchange rate type P on 2/23/2009: USD -> PHP Pls advise on what to do. thanks in advance. Edited by: srm.consultant2 on Sep 29, 2009 10:20 AM
-
Hello, I had recently inquired about Headless server and thin clients. I read about that and also fat clients. I would also like to be able to wireless LTSP if I were to do this. I others have done wireless, but it does seem much more involved. I thi
-
hey, i am using Hp 15-r062tu notebook Laptop,which have operating system windows 7 ultimate 32bit, i want a link for all the drivers .....couldn't able to find them ...plz help
-
Hello one and all, I recently bought and installed a new HDD into my late 2009 MBP am trying to transfer everything over. I have it all backed up to an external disk. When I go into migration assistant, I can't swap my profile over because my profile
-
O2 - The sim card inserted in this iPhone does not appear to be supported
I just sold my iPhone recently to a guy who has now gone out to Libya for a while, the phone worked fine on iOS 4 with Three, and was offically unlocked by O2 and worked on O2 and Vodafone before selling it, however now he has gone out to Libya the p