Related to ACD(Add chage Delete) for extend button need update table name.

In which table the data(new material number , the plant number etc.) are updated for ACD(Add Change Delete) when a new material is included in plant or extend from one plant to another plant in material Management(MM).Any pointer from any side will help me a lot...
Thanks in advance
Azizur.

Hi,
You can check all the material master tables and
other material related tables from t-code SE11.
There in the table name area you have to write
MA* and press F4,it will fetch you all the material
related tables in a drop down.
Hope it helps
Regards
Mansi

Similar Messages

I NEED THE TABLE NAME FOR THE FIELD DESCRIPTION GIVEN!

I NEED THE TABLE NAME FOR THE FIELD DESCRIPTION GIVEN!
Partner Type
Partner Type Desc
Partner no
Partner Name
Partner Address 1
Partner Address 2
Partner Address 3
Partner Address 4

Hi Jyotirmoy ,
You can get all partners and their type in table EDPP1, depending of the partner type you need to go to specific table for address and other details, like for partner type KU(customer) goto KNA1,etc for partner type LI(vendor) goto LFA1 etc for partner type B(bank) goto BNKA etc ....
Sirish

Global binding for radio buttons needs tweaking

When selecting global binding for a text or numeric field, its corresponding field with the same name also changes to global binding.
However when doing this for radio button exclusion groups, the other radio button groups don't automatically change to global. You have to do it manually.

Found the problem in another topic:
scott sheck - 1:30am Jun 29, 07 PST (#6 of 7)
A pasted radio button is automatically added to an existing exclusion group if the last added item was a radio button. This is in the help.
I wish there was a default to turn this off because I don't want to add a temporary item just to get a new exclusion group.

Need actual table name for Bom_Bo_Pub.Bom_Revision_Tbl_Type

How can I get actual table name for Bom_Bo_Pub.Bom_Revision_Tbl_Type? I am trying to confirm if this particular table has a "REVISION_LABEL" column in 11.5.9.

Duplicate post.
Need to know actual table name for actual table name for Bom_Bo_Pub.Bom_Rev
Need to know actual table name for actual table name for Bom_Bo_Pub.Bom_Rev

Support for Double Byte Chars in Table Names

Can you please tell me if double byte characters are supported in table names? Thanks.

Assuming you are using the same double byte character set as your db character set, then the answer is yes. Check out this table in the 9i Database Globalization Support Guide, for more info.
http://technet.oracle.com/docs/products/oracle9i/doc_library/release2/server.920/a96529/ch2.htm#103678
Schema objects refer to table/index/view names etc.

Can't add action script to my buttons, need help

I'm trying to add action script to my buttons to link them but the script menu has the message "Current selection cannot have actions applied to it" Why is this happening?
see attached

Okay,
I have a page where I have a button that states "PRODUCTS". I need to get
the button to send the user to another page called "products.swf
(products.fla)". What script to I insert in the actions menu?
Thanks
Derrick Young - Graphic Designer, Art Dept.
(d) 403.250.4261 | (f) 403.250.4336 | www.calgarysun.com
(e) [email protected] | (a) 2615 12th Street N.E., Calgary, AB
T2E 7W9

How to Add and delete a row while using Abstract Table Model

Hi,
I need to do the following functionalities in JTable.I've done tht but a small problem.
1. Adding a row (Using addRow() method from DefaultTableModel).
2. Deleting a row(Using setRowCount() method from Default Table Model).
3. Sorting the table based on the selection of column(Using TableSorter which is using AbstracTableModel).
As the sorting is mandatory i've to change my model to Abtract Table Model
The problem is this Abstract Table Model doesn't have any methods to Add a row or deleting a row (setRowCount()).If anybody has written any utility method for this using Abstract Table Model help me.

Using TableSorter which is using AbstracTableModel).If your talking about the TableSorter class from the Swing tutorial, then you create the TableSorter class by passing it a TableModel. There is no reason you can't use the DefaltTableModel.
I changed the code in TableSorterDemo as follows:
        String[] columnNames = {"First Name",
                                        "Last Name",
                                        "Sport",
                                        "# of Years",
                                        "Vegetarian"};
        Object[][] data = {
            {"Mary", "Campione",
             "Snowboarding", new BigDecimal(1), new Boolean(false)},
            {"Alison", "Huml",
             "Rowing", new BigDecimal(3), new Boolean(true)},
            {"Kathy", "Walrath",
             "Knitting", new BigDecimal(2), new Boolean(false)},
            {"Sharon", "Zakhour",
             "Speed reading", new BigDecimal(20), new Boolean(true)},
            {"Philip", "Milne",
             "Pool", new BigDecimal(10), new Boolean(false)}
          DefaultTableModel model = new DefaultTableModel(data, columnNames)
               public Class getColumnClass(int c)
                    return getValueAt(0, c).getClass();
        TableSorter sorter = new TableSorter(model);
//        TableSorter sorter = new TableSorter(new MyTableModel()); //ADDED THIS

How to create a sharepoint list to add/change/delete the data in SQL server Table based on users inputs

I have a table in sql with employee_num and I need to create a list and link that list to this table to make changes to table based on values user enter or selects.

Hi,
In addition, you could refer to one similar thread for related information:
http://social.technet.microsoft.com/Forums/sharepoint/en-US/8ee8a7b2-ddfc-4654-b84e-b062aeb527ae/how-to-create-exernal-list-in-sharepoint-which-fetch-data-from-multiple-sql-table?forum=sharepointgeneral
Regards,
Rebecca Tu
TechNet Community Support

Final Advice For Extending Network Needed

Bob Timmons has helped me greatly here and I hope this may be the last time I'll ask these questions! I purchased a new AEBS to connect to my cable modem. I believe that I was getting significant interference from the many 2.4GHz networks in my community resulting in some erratic wifi behavior and download speeds. I set the AEBS to broadcast differently named 2.4 and 5GHz networks. My imac, MB Pro laptop, ipad and AppleTV2 all connect to the 5. Only our iphones now use the 2.4. As expected the 5N network has a weaker signal but the apparent lack of interference has completely stabilized the wifi connection on those devices and my download speeds on my laptop are identical on wifi or connected directly to the cable modem. So that has been a major improvement.
However I'm thinking I might be able to improve the signal strength of the 5N network in the area that the devices are mostly used. The AEBS and cable modem are in a third floor bedroom while the devices are on the second floor. This doesn't affect the computers much but I get quite different download speeds on my ipad when I'm downstairs as opposed to when I'm upstairs near the AE. I'm not sure what the affect is on the Apple Tv, I don't know how you would measure download speeds on it, but I do see that the signal strength indicator has dropped a bar. So my thought is to use my Airport Express - the 1264 model - to wirelessly extend/boost the signal on the floor where all these devices are.
There is a spot in my dining room on the second floor that is just below the bedroom that the AE and modem are in that seems to get a pretty strong signal from both the 2.4 and 5 network. I used iStumbler to check this in several locations on that floor. So my thought is to place the AX there. From the advice I've been given and what I've read this is how I plan to configure everything and want to check if I have everything correct.
On the AEBS I would check allow this network to be extended. On the AX, wireless mode set to extend wireless network. I believe from that setting I'll be given a choice of networks or maybe have to manually enter the name of the one I want extended. I intend to extend the 5N network so I would use that specific name and the same password that is used on the AE. I believe I've read that there will be no option for channel selection as that would be controlled by the AE(?) I'm not certain what Radio mode would be, perhaps that is automatically set as well. Wireless security would be the same, I'm using WPA2 personal. I'm not sure what the connection sharing option would be with this setup, perhaps 0ff( bridge mode ).
Are there any other settings I need to be aware of? Also since the network name will be the same on the AX as the AE and channels I believe will be the same is there any way to know which base station a device is connected to? I know I could open up Airport Utility and check wireless clients on both to see this but it would be nice to be able to this from the menu bar of the computers. Perhaps the BSSID would tell me that. The reason I would want to know this is to be able to see whether my download speeds are maintained through the AX with this set up. If they were negatively impacted I might forgo the whole thing and just leave things as they are.

Suggest that you move the AirPort Express (AX) close to your AirPort Extreme for the configuration setup. Once you have it set up, you can move it to the desired location. It may take some experimentation to find the best location for the AX.
On the AEBS I would check allow this network to be extended. On the AX, wireless mode set to extend wireless network.
Yes, that is correct.
I believe from that setting I'll be given a choice of networks or maybe have to manually enter the name of the one I want extended. I intend to extend the 5N network so I would use that specific name and the same password that is used on the AE.
When you click on the Wireless Network name box, you should see the 5 GHz network and 2.4 GHz network displayed. Click the 5 GHz network to select it.
I believe I've read that there will be no option for channel selection as that would be controlled by the AE(?)
That's correct. The AX will use the same channel as the AEBS automatically, so you will not even see a setting for Channel on the AX setup.
I'm not certain what Radio mode would be, perhaps that is automatically set as well.
Yes, this is set Automatically to the same Radio Mode that the AEBS is using for the network that you are extending. You will not see a setting for this on the AX setup.
Wireless security would be the same, I'm using WPA2 personal.
Correct, same setting as the AEBS.
I'm not sure what the connection sharing option would be with this setup, perhaps 0ff( bridge mode ).
There will be no selection for Connection Sharing displayed on the AX setup. The AX is automatically configured in bridge mode when you select the "Extend" option.
The "extend" setup is quite simple in AirPort Utility. Here are the basic steps:
AirPort Utility - Manual Setup
Base Station tab to name your device, establish a device password and adjust Time Zone settings
Click the Wireless tab:
Wireless Mode = Extend a wireless network
Wireless Network Name = Name of your 5 GHz network
Check mark next to Allow wireless clients.
Security = Same as your AEBS
Password = Same as your AEBS
That's it.
is there any way to know which base station a device is connected to?
Yes. Open AirPort Utility and click on your AEBS. Look for the AirPort ID in the info to the right and jot it down. Do the same with the AX.
Move your laptop close to the AX. Hold down the option key on your Mac while you click on the fan shaped Airport icon at the top of the screen. Look for the BSSID. That should be the same as the AirPort ID of the AX. If you see the AirPort ID of the AEBS, then the computer is connecting to that device, not the AX. Check your setup again if that is the case.
Good luck!
Message was edited by: Bob Timmons

BPC-Add in "Action" between 'Send data" and "Update Tables"

Hi all,
After the click of "Send data" ,I want to take some CHECK before the data is updated in Database tables.
Note that this kind of CHECKs are much beyond the function of VALIDATIONs( standard function delivered by BPC).
So could I write some scripts( in v 5.1) to do such tasks. And how to get the eaxct Dimension/Memeber/Values in this input schedule, since I will base on these data to take checking ?
Thanks very much.

Yes this is done all the time.
Create a button on the template and add a macro behind it.
Use one of the BPC macros that suite your needs to send data.
You can find more information in the online help or the BPC office user guide.
MNU_eSUBMIT_REFRESHINPUTCELL Refreshes EvSND - cells in an input schedule.
MNU_eSUBMIT_REFSCHEDULE_SHEET_NOACTION - Sends data without clearing or refreshing.
MNU_eSUBMIT_REFSCHEDULE_SHEET_CLEAR - Sends data and clears input cells.
MNU_eSUBMIT_REFSCHEDULE_SHEET_REFRESH - Sends data and refreshes the worksheet.
MNU_eSUBMIT_REFSCHEDULE_SHEET_CLEARANDREFRESH - Sends data and clears and refreshes the worksheet.
MNU_eSUBMIT_REFSCHEDULE_BOOK_NOACTION - Sends data without clearing or refreshing the worksheet.
This is just a few.
Also;
BEFORE_SEND
You use the BEFORE_SEND function to execute a custom operation before OutlookSoft for Excel sends
data.
Function BEFORE_SEND(Argument As String)
MsgBox Argument
BEFORE_SEND = True
End Function
AFTER_SEND
You use the AFTER_SEND function to execute a custom operation after OutlookSoft for Excel sends data.
Function AFTER_SEND(Argument As String)
MsgBox Argument
AFTER_SEND = True
End Function

FOR LOOP cursor that updates table A based on a value in table B

Hi,
I need a FOR LOOP cursor that scans and updates all pro-rata column in table EMPLOYEE(child) based on what pay classification all employees are on in the CLASSIFICATION(parent) table.
DECLARE
BEGIN
IF employee.emp_type = 'FT' THEN
UPDATE employee
SET employee.pro_rata = ((classification.yearly_pay/52)*52)
WHERE employee.empid = v_empid AND classification.class_id = employee.class_id;
END IF;
IF employee.emp_type = 'PT1' THEN
UPDATE employee
SET employee.pro_rata = ((classification.yearly_pay/39)*52)
WHERE employee.empid = v_empid AND classification.class_id = employee.class_id;
END IF;
IF employee.emp_type = 'PT2' THEN
UPDATE employee
SET employee.pro_rata = ((classification.yearly_pay/21)*52)
WHERE employee.empid = v_empid AND classification.class_id = employee.class_id;
END IF;
END;
How do I create a cursor that cuts across these two table
See tables and data
CREATE TABLE CLASSIFICATION(
CLASS_ID VARCHAR2(6) NOT NULL,
CLASS_TYPE VARCHAR2(10),
DESCRIPTION VARCHAR2(30) NOT NULL,
YEARLY_PAY NUMBER(8),
HOURLY_RATE NUMBER,
WEEKDAY_OVER_TIME NUMBER,
WEEKEND_OVER_TIME NUMBER,
CONSTRAINT PK_CLASS_ID PRIMARY KEY (CLASS_ID));
INSERT INTO CLASSIFICATION VALUES('PR1','PERMANENT','MANAGER',45000,'','',NULL);
INSERT INTO CLASSIFICATION VALUES('PR2','PERMANENT','ADMIN ASSISTANT',22000,'',1.5,NULL);
INSERT INTO CLASSIFICATION VALUES('PR3','PERMANENT','CONTROLLER',32000,'',1.5,NULL);
INSERT INTO CLASSIFICATION VALUES('PR4','PERMANENT','CASH OFFICER',22000,'',1.5,NULL);
INSERT INTO CLASSIFICATION VALUES('PR5','PERMANENT','CLEANERS',16000,'',1.5,NULL);
INSERT INTO CLASSIFICATION VALUES('PR6','PERMANENT','ADMIN OFFICER',22000,'',1.5,NULL);
INSERT INTO CLASSIFICATION VALUES('PR7','PERMANENT','WAREHOUSE ATTENDANT',20000,'',1.5,NULL);
INSERT INTO CLASSIFICATION VALUES('PR8','PERMANENT','WINDOWS DRESSER',22000,'',1.5,NULL);
INSERT INTO CLASSIFICATION VALUES('PR9','PERMANENT','DIRECTOR',60000,'','',NULL);
INSERT INTO CLASSIFICATION VALUES('PR10','PERMANENT','DEPUTY DIRECTOR',52000,'','',NULL);
INSERT INTO CLASSIFICATION VALUES('PR11','PERMANENT','SALES ASSISTANT',21000,'',1.5,NULL);
INSERT INTO CLASSIFICATION VALUES('TEMP2','TEMP STAFF','ADMIN ASSISTANT','',16.50,'',NULL);
INSERT INTO CLASSIFICATION VALUES('TEMP3','TEMP STAFF','CONTROLLER','',29.00,'',NULL);
INSERT INTO CLASSIFICATION VALUES('TEMP4','TEMP STAFF','CASH OFFICER','',19.00,'',NULL);
INSERT INTO CLASSIFICATION VALUES('TEMP5','TEMP STAFF','CLEANERS','',10.00,'',NULL);
INSERT INTO CLASSIFICATION VALUES('TEMP6','TEMP STAFF','ADMIN OFFICER','',20.00,'',NULL);
INSERT INTO CLASSIFICATION VALUES('TEMP7','TEMP STAFF','WAREHOUSE ATTENDANT','',18.00,'',NULL);
INSERT INTO CLASSIFICATION VALUES('TEMP8','TEMP STAFF','WINDOWS DRESSER','',18.50,'',NULL);
INSERT INTO CLASSIFICATION VALUES('TEMP11','TEMP STAFF','SALES ASSISTANT','',16.00,'',NULL);
CREATE TABLE EMPLOYEE(
EMPID NUMBER(5) NOT NULL,
SURNAME VARCHAR2(30) NOT NULL,
FNAME VARCHAR2(30) NOT NULL,
GENDER CHAR(1) NOT NULL,
DOB DATE NOT NULL,
EMP_TYPE VARCHAR2(20) NOT NULL,
ANNUAL_WEEKS_REQD NUMBER(2),
PRO_RATA_WAGES NUMBER(7,2),
HOLIDAY_ENTLMENT NUMBER(2),
SICK_LEAVE_ENTLMENT NUMBER(2),
HIRE_DATE DATE NOT NULL,
END_DATE DATE,
ACCNO NUMBER(8) NOT NULL,
BANKNAME VARCHAR2(20) NOT NULL,
BRANCH VARCHAR2(20) NOT NULL,
ACCOUNTNAME VARCHAR2(20),
CLASS_ID VARCHAR2(6),
CONSTRAINT CK_HIRE_END CHECK (HIRE_DATE < END_DATE),
CONSTRAINT CK_HIRE_DOB CHECK (HIRE_DATE >= ADD_MONTHS(DOB, 12 * 18)),
CONSTRAINT CK_EMP_TYPE CHECK (EMP_TYPE IN ('FT','PT1','PT2','PT3','HOURLY')),
CONSTRAINT CK_EMP_GENDER CHECK (GENDER IN ('M','F')),
CONSTRAINT FK_EMP_CLASS FOREIGN KEY (CLASS_ID) REFERENCES CLASSIFICATION(CLASS_ID),
CONSTRAINT PK_EMP PRIMARY KEY (EMPID));
CREATE SEQUENCE SEQ_EMPID START WITH 1;
INSERT INTO EMPLOYEE VALUES(
SEQ_EMPID.NEXTVAL,'RICHARD','BRANDON','M','25-DEC-1966','FT',52,22000.00,28,14,'10-JAN-2005',NULL,90823227,'NATWEST','BROMLEY','DEPOSIT','PR2');
INSERT INTO EMPLOYEE VALUES(
SEQ_EMPID.NEXTVAL,'BOYCE','CODD','M','15-JAN-1972','PT1','','','','','12-JAN-2005',NULL,72444091,'LLOYDS','KENT','CURRENT','PR8');
INSERT INTO EMPLOYEE VALUES(
SEQ_EMPID.NEXTVAL,'ALHAJA','BROWN','F','20-MAY-1970','HOURLY','','','','','21-JUN-2000',NULL,09081900,'ABBEY','ESSEX','CURRENT','TEMP2');
INSERT INTO EMPLOYEE VALUES(
SEQ_EMPID.NEXTVAL,'RON','ATKINSON','M','10-AUG-1955','PT3','','','','','12-JAN-2005','26-MAR-2006',01009921,'HALIFAX','KENT','SAVINGS','PR6');
INSERT INTO EMPLOYEE VALUES(
SEQ_EMPID.NEXTVAL,'CHAMPI','KANE','F','01-JAN-1965','PT2','','','','','12-JAN-2004',NULL,98120989,'HSBC','ILFORD','CURRENT','PR4');
INSERT INTO EMPLOYEE VALUES(
SEQ_EMPID.NEXTVAL,'NED','VED','M','15-JAN-1980','HOURLY','','','','','29-DEC-2005',NULL,90812300,'WOOLWICH','LEWISHAM','CURRENT','TEMP6');
INSERT INTO EMPLOYEE VALUES(
SEQ_EMPID.NEXTVAL,'JILL','SANDER','F','22-MAR-1971','FT','','','','','30-NOV-2003',NULL,23230099,'BARCLAYS','PENGE','DEPOSIT','PR1');
Any contribution would be appreciated
many thanks
Cube60

Hi,
I have triede this cursor procedure but I get an compilation error.
See first post for tables and data..
Can someone help me out please.
SQL> CREATE OR REPLACE PROCEDURE update_employee(
2 p_empid employee.empid%type,
3 p_emp_type employee.emp_type%type)
4 IS
5 CURSOR c1 is
6 select e.empid, e.emp_type, c.yearly_pay from employee e, classification c where
7 c.class_id = e.class_id;
8 BEGIN
9 OPEN c1
10 LOOP
11 FETCH c1 INTO p_empid, p_emp_type;
12 exit when c1%notfound;
13
14 IF v_emp_type ='PT1' THEN
15 UPDATE employee SET annual_weeks_reqd = 39, pro_rata_wages = ((v_yearly_pay/52)*39), holiday_en
tlment=21, sick_leave_entlment = 10.5 WHERE c.class_id = e.class_id;
16 END IF;
17 END;
18 /
Warning: Procedure created with compilation errors.
SQL> SHOW ERR;
Errors for PROCEDURE UPDATE_EMPLOYEE:
LINE/COL ERROR
10/1 PLS-00103: Encountered the symbol "LOOP" when expecting one of
the following:
. ( % ; for
The symbol "; was inserted before "LOOP" to continue.
Many thanks

How to add mouse listener for a single row alone

I have a requirement. In a JTable when I double click a particular row the cells in the row should set to the width which I have provided.
The problem with my code is when I click fourth row in the table, the first row gets adjusted.
So how I need help is
only if I click the first row, the first row cell size should get adjusted not when I click fourth row.
Similarly if I give some cell width and height for fourth row cells, then when I double click the fourth row, the fourth should alone get adjusted and not the other rows.
Hope I have explained clearly.
How can it be achieved?
Please find below my code. Everything is hardcoded. So it may look messy. Please excuse.
// Imports
import java.awt.BorderLayout;
import java.awt.Color;
import java.awt.Component;
import java.awt.event.MouseAdapter;
import java.awt.event.MouseEvent;
import javax.swing.JFrame;
import javax.swing.JPanel;
import javax.swing.JScrollPane;
import javax.swing.JTable;
import javax.swing.JTextArea;
import javax.swing.table.DefaultTableModel;
import javax.swing.table.TableCellRenderer;
import javax.swing.table.TableColumn;
class SimpleTableExample extends JFrame {
// Instance attributes used in this example
private JPanel topPanel;
private JTable table;
private JScrollPane scrollPane;
String data1 = "";
String data2 = "123456789ABCDEFGHIJKLMNOPQRSTUVQWXYZabcdefghijklmnopqrstuvwxyzaquickbrownfoxjumpedoverthelazydog";
int size = data2.length();
// Constructor of main frame
public SimpleTableExample() {
     // Set the frame characteristics
     setTitle("Simple Table Application");
     setSize(400, 200);
     setBackground(Color.gray);
     // Create a panel to hold all other components
     topPanel = new JPanel();
     topPanel.setLayout(new BorderLayout());
     getContentPane().add(topPanel);
     // Create columns names
     String columnNames[] = { "SEL", "DESIGN DATA", "PART NUMBER" };
     // Create some data
     String dataValues[][] = { { data1, data2, "67", "77" },
          { "", "43", "853" }, { "", "89.2", "109" },
          { "", "9033", "3092" } };
     DefaultTableModel model = new DefaultTableModel(dataValues, columnNames);
     model.addColumn("PART TITLE");
     model.addColumn("SPECIAL INSTRUCTIONS");
     table = new JTable(model) {
     public boolean isCellEditable(int rowIndex, int colIndex) {
          return false;
     // set specific row height
     table.setAutoResizeMode(JTable.AUTO_RESIZE_OFF);
     int colInd = 0;
     TableColumn col = table.getColumnModel().getColumn(colInd);
     int width = 50;
     col.setPreferredWidth(width);
     int colInd2 = 1;
     TableColumn col2 = table.getColumnModel().getColumn(colInd2);
     int width2 = 100;
     col2.setPreferredWidth(width2);
     int colInd3 = 2;
     TableColumn col3 = table.getColumnModel().getColumn(colInd3);
     int width3 = 10;
     col3.setPreferredWidth(width3);
     int colInd4 = 3;
     TableColumn col4 = table.getColumnModel().getColumn(colInd4);
     int width4 = 10;
     col4.setPreferredWidth(width4);
     int colInd5 = 4;
     TableColumn col5 = table.getColumnModel().getColumn(colInd5);
     int width5 = 10;
     col5.setPreferredWidth(width5);
     table.addMouseListener(new MouseAdapter() {
     public void mouseClicked(MouseEvent e) {
          if (e.getClickCount() == 2) {
          JTable target = (JTable) e.getSource();
          int row = target.getSelectedRow();
          int column = target.getSelectedColumn();
          TableColumn col1 = table.getColumnModel().getColumn(0);
          col1.setPreferredWidth(50);
          TableColumn col2 = table.getColumnModel().getColumn(1);
          col2.setPreferredWidth(400);
          table.getColumnModel().getColumn(1).setCellRenderer(
               new TableCellLongTextRenderer());
          table.setRowHeight(50);
          TableColumn col5 = table.getColumnModel().getColumn(4);
          col5.setPreferredWidth(200);
     // Create a new table instance
     // table = new JTable(dataValues, columnNames);
     // Add the table to a scrolling pane
     scrollPane = new JScrollPane(table);
     topPanel.add(scrollPane, BorderLayout.CENTER);
// Main entry point for this example
public static void main(String args[]) {
     // Create an instance of the test application
     SimpleTableExample mainFrame = new SimpleTableExample();
     mainFrame.setVisible(true);
class TableCellLongTextRenderer extends JTextArea implements TableCellRenderer {
public Component getTableCellRendererComponent(JTable table, Object value,
     boolean isSelected, boolean hasFocus, int row, int column) {
     this.setText((String) value);
     this.setWrapStyleWord(true);
     this.setLineWrap(true);
     // set the JTextArea to the width of the table column
     setSize(table.getColumnModel().getColumn(column).getWidth(),
          getPreferredSize().height);
     if (table.getRowHeight(row) != getPreferredSize().height) {
     // set the height of the table row to the calculated height of the
     // JTextArea
     table.setRowHeight(row, getPreferredSize().height);
     return this;
Edited by: 915175 on Aug 3, 2012 4:24 AM

Hi
Try below code. Hope this will help
import java.awt.BorderLayout;
import java.awt.Color;
import java.awt.Component;
import java.awt.event.MouseAdapter;
import java.awt.event.MouseEvent;
import javax.swing.JFrame;
import javax.swing.JPanel;
import javax.swing.JScrollPane;
import javax.swing.JTable;
import javax.swing.JTextArea;
import javax.swing.table.DefaultTableModel;
import javax.swing.table.TableCellRenderer;
import javax.swing.table.TableColumn;
public class SimpleTableExample extends JFrame {
private JPanel topPanel;
private JTable table;
private JScrollPane scrollPane;
String data1 = "";
String data2 = "123456789ABCDEFGHIJKLMNOPQRSTUVQWXYZabcdefghijklmnopqrstuvwxyzaquickbrownfoxjumpedoverthelazydog";
int size = data2.length();
// Constructor of main frame
public SimpleTableExample() {
// Set the frame characteristics
setTitle("Simple Table Application");
setSize(400, 200);
setBackground(Color.gray);
// Create a panel to hold all other components
topPanel = new JPanel();
topPanel.setLayout(new BorderLayout());
getContentPane().add(topPanel);
// Create columns names
String columnNames[] = { "SEL", "DESIGN DATA", "PART NUMBER" };
// Create some data
String dataValues[][] = { { data1, data2, "67", "77" },
{ "", "43", "853" }, { "", "89.2", "109" },
{ "", "9033", "3092" } };
DefaultTableModel model = new DefaultTableModel(dataValues, columnNames);
model.addColumn("PART TITLE");
model.addColumn("SPECIAL INSTRUCTIONS");
table = new JTable(model) {
public boolean isCellEditable(int rowIndex, int colIndex) {
return false;
// set specific row height
table.setAutoResizeMode(JTable.AUTO_RESIZE_OFF);
int colInd = 0;
TableColumn col = table.getColumnModel().getColumn(colInd);
int width = 50;
col.setPreferredWidth(width);
int colInd2 = 1;
TableColumn col2 = table.getColumnModel().getColumn(colInd2);
int width2 = 100;
col2.setPreferredWidth(width2);
int colInd3 = 2;
TableColumn col3 = table.getColumnModel().getColumn(colInd3);
int width3 = 10;
col3.setPreferredWidth(width3);
int colInd4 = 3;
TableColumn col4 = table.getColumnModel().getColumn(colInd4);
int width4 = 10;
col4.setPreferredWidth(width4);
int colInd5 = 4;
TableColumn col5 = table.getColumnModel().getColumn(colInd5);
int width5 = 10;
col5.setPreferredWidth(width5);
// Cell Render should apply on each column -- add by Rupali
for(int i=0; i< table.getColumnModel().getColumnCount(); i++){
table.getColumnModel().getColumn(i).setCellRenderer( new TableCellLongTextRenderer());
table.addMouseListener(new MouseAdapter() {
public void mouseClicked(MouseEvent e) {
if (e.getClickCount() == 2) {
JTable target = (JTable) e.getSource();
int row = target.getSelectedRow();
int column = target.getSelectedColumn();
setTableCellHeight(table,row,column); //Added by Rupali
TableColumn col1 = table.getColumnModel().getColumn(0);
col1.setPreferredWidth(50);
TableColumn col2 = table.getColumnModel().getColumn(1);
col2.setPreferredWidth(400);
TableColumn col5 = table.getColumnModel().getColumn(4);
col5.setPreferredWidth(200);
// Create a new table instance
// table = new JTable(dataValues, columnNames);
// Add the table to a scrolling pane
scrollPane = new JScrollPane(table);
topPanel.add(scrollPane, BorderLayout.CENTER);
* Created By Rupali
* This will set cell's height and column's width
* @param table
* @param row
* @param column
public void setTableCellHeight(JTable table, int row, int column) {
// set the JTextArea to the width of the table column
setSize(table.getColumnModel().getColumn(column).getWidth(),
getPreferredSize().height);
if (table.getRowHeight(row) != getPreferredSize().height) {
// set the height of the table row to the calculated height of the
// JTextArea
table.setRowHeight(row, getPreferredSize().height);
// Main entry point for this example
public static void main(String args[]) {
// Create an instance of the test application
SimpleTableExample mainFrame = new SimpleTableExample();
mainFrame.setVisible(true);
class TableCellLongTextRenderer extends JTextArea implements TableCellRenderer {
public Component getTableCellRendererComponent(JTable table, Object value,
boolean isSelected, boolean hasFocus, int row, int column) {
this.setText((String) value);
this.setWrapStyleWord(true);
this.setLineWrap(true);
return this;
}

Using a parameter for a table name?

In SQL Server, can you use a parameter for a table name? I'm working with Visual C# and want to do something like this:
SELECT MAX(ItemID) FROM @TableName;
Can this be done?
(Basically, I have three separate methods within a class--one for each table I have; and each one will perform the above query but on different table names. I'd like to see if there is a way that I can have just one method that will allow me to specify
the table name.)

As pointed out in other posts, you can. But a more relevant question is whether you should.
A table in a relational database is supposed to model a unique entity, and each column in the table is supposed to model a unique attribute. This is not always how it is, but it is from this model a relational database is designed.
From this angle, having a dynamic table name does not really make sense for application code. (Administrative actions is a different story.) Think of it this way: have you ever wanted to make the class name dynamic in C#?
Admittedly, it is different in .NET, because everything inherits from System.Object, but in a relational database there is no inheritence.
Anyway, if you are using stored procedures, you should have one stored procedure per table. Physically, in the plan cache, there will be one query plan per table, no matter how you do it.
If you are submitting SQL statements from your application, it is a different matter. In this case, I find it difficult to object if you have a class that performs generic actions against tables. Then you build the SQL string in the client code.
However, no matter how you do it, you need to be careful to avoid SQL injection. We had the example:
DECLARE @TableName nvarchar(50),@sqlCommand nvarchar(max)
SET @TableName = ' ItemInformation'
SET @sqlCommand = 'SELECT MAX(ItemID) FROM ' + @TableName
EXEC (@sqlCommand)
But what if we have:
SET @TableName = ' sys.objects; SHUTDOWN WITH NOWAIT; --'
As long as we do it in T-SQL, we can (and we should do!) this to prevent SQL injection:
SET @sqlCommand = 'SELECT MAX(ItemID) FROM ' + quotename(@TableName)
If you build your SQL strings in C#, you will need to employ other checks. There is only an issue if the user can inject data somewhere, but your generic class will not have knowledge of this, and must assume the worst.
Erland Sommarskog, SQL Server MVP, [email protected]

Table name for the status Cstd

Hi
Need the table name for the sales order line item status Cstd
Steps
Go to the sales order line item
go to the Tab status
under that in processing status--> system status
here Cstd is there but we are not able to find the table name for that
Strecture is RV45A and field name is STTXT
we are planing to restrict the PP order being released if the status is not Cstd
PP order should release if the status in Sales order line item is Cstd
Can you help to findout the table name foth above field
Thanks
Kameshwar Rao

Hi
Table name is VBUP and the method to check the creation of Production order is BADI workorder_update
I would rather prefer to have a COSTED status as a part of the incompletion Log in SD module so that you cant save a SO if SO is not costed... See if that is possible for you
OR you can also change your Req Class settings to auto calculate SO cost estimate upon Saving SO
br, Ajay M

Table name for VAT ...

Hi Friends
What is table name for Reg No and VAT NO for Company Code
What is table name for Customer Vat No
ITs urgent
Regards
Bobbili

Here we go:
1.) T001
2.) KNA1
Cheers
Hein

Related to ACD(Add chage Delete) for extend button need update table name.

Similar Messages

Maybe you are looking for