Related to display problem

sir when i start my laptop then monitor intensity is very low its not visible but sometimes its working properly with fluctuation but good....whats the solution plz mail me ...thanks for seeing my problem

What model of notebook are you using?
-------------How do I give Kudos? | How do I mark a post as Solved? --------------------------------------------------------

Similar Messages

My original post, locked by this forum. Display problem related

Hi G5 Gurus,
The display problem first, we all know when screen savers display, a click on the mouse will bring you back to the active desktop, this was how it worked., but now, sometimes a click cause the G5 to sleep!
As for the sleep, I dare not to put it to sleep these days, because I am afriad it may cause a fire by over heating. Sometmes, actually four times in the past few months, my G5 could wake up by itself, followed by a extrem high speed running of the cooling fan, it sounded like a hair dryer running in the same room. Sometimes the sreen could light up, just like real wake up, sometimes, it was black. No clicks the mouse or keyboeard could bring it back to normal, I had to press and hold the power button to turn it off.
This crazy problem happened for the first time last summer, a dead hard disk was the cost. Apple replaced it, but failed to detect the cooling or power or display problem. I was given one month extended free service, but right after its end, the problem was back and happened even more often.
Please let me know if any of you had the same problem and please advise what to do.
100s Gs of thanks.
Songyan
iMac G5 Mac OS X (10.4.8)
la teller
Posts: 1
From: Los Angeles
Registered: Jan 10, 2007
Re: What's the problem? Display? Power supply? Cooling? My G5's gone mad
Posted: Jan 10, 2007 2:21 PM in response to: Bad luck G5
I have the EXACT same problem. In fact, I could not have described it better myself. What gives? I brought it in to the "genius" bar and they repolaced the power supply free of charge but the problem is still there. I noticed they ordered a new logic board but did not end up replacing it after all. Did you have yours replaced and did it work? Is this a known issue?
imac G5 17 inch Mac OS X (10.3.9)
Bad luck G5
Posts: 8
From: UK
Registered: Jan 10, 2007
Re: What's the problem? Display? Power supply? Cooling? My G5's gone mad
Posted: Jan 11, 2007 1:20 PM in response to: la teller
Hi La teller,
Thank you for your reply. The 'genius' here in London only replace the dead hard disk, which I belive was a victim of this problem. I was told they couldn't find anything wrong with the power supply or the cooling system.
Now at lest I know I am not the only bad luck guy. Let's wait and see if others are having the same problem. I am not sure if this is a known issue to Apple, even if it is, it may take years before they can offer a recall or free repaire. I noticed that some G5s have already been suffering from power problems and a free repaire was offered.
Thank you again and hope Apple can take our concerns into their consideration soon.
Songyan
iMac G5 Mac OS X (10.4.8)
stopha6
Posts: 1
From: US
Registered: Jan 12, 2007
Re: What's the problem? Display? Power supply? Cooling? My G5's gone mad
Posted: Jan 12, 2007 7:43 AM in response to: Bad luck G5
Hello,
I'm also having this problem (fan running, won't come out of sleep), just spoke with an apple care rep. He confirmed my suspition that it was software, not hardware as I have just had the logic board and power supply replaced.
His suggestions were to:
1. Run disk repair from the startup CD
try running OS X from a firewire drive and see if the same behavior happens or
perform and archive and install.
When the fan starts to run like that it means the OS is not communicating with the hardware properly. The OS could be somewhat corrupt if you were having hardware issues beforehand, hence the need for a reinstall. I will be performing an archive and install after the disk repair, I'll let you know if it fixes the problem!
iMac G5 Mac OS X (10.4.8)
Bad luck G5
Posts: 8
From: UK
Registered: Jan 10, 2007
Re: What's the problem? Display? Power supply? Cooling? My G5's gone mad
Posted: Jan 14, 2007 12:52 PM in response to: stopha6
Hi Stopha6,
Thank you for your message. I never imagined it could be a software issue, cos it looked so hardware.
Please keep me updated with your progress.
By the way, as I said in my old posts, a hard disk went dead when this happened for the very first time, how do you read this?
Thank you.
Songyan
iMac G5 Mac OS X (10.4.8)
Bad luck G5
Posts: 8
From: UK
Registered: Jan 10, 2007
Re: What's the problem? Display? Power supply? Cooling? My G5's gone mad
Posted: Jan 15, 2007 6:58 AM in response to: stopha6
Hi Stopha6,
After reading your reply again, I realized that the system had already been reinstalled. As I said when it happened for the first time, the hard disk died with it, which was replaced, of course with a new OS X, but the same problem is still happening. May this suggest that it is not just a software problem? Thank you. Songyan
iMac G5 Mac OS X (10.4.8)
AG-Nate
Posts: 5
From: Pismo Beach,CA
Registered: Aug 26, 2006
Re: What's the problem? Display? Power supply? Cooling? My G5's gone mad
Posted: Jan 14, 2007 3:38 PM in response to: Bad luck G5
The Fans going at full is only because you have an application that is using a lot of cpu power and therefore causing the imac to heat up so it turns the fans on. The screen-saver and sleep problem you describe sounds like something that may just happen on accident. But this sounds mostly like a software problem. Try making sure to always quit all non-apple products and see if anything changes.
eMac, iMacG5 Mac OS X (10.4.7) 800mhz 1gig ram, 2ghz 2gigs of ram
Bad luck G5
Posts: 8
From: UK
Registered: Jan 10, 2007
Re: What's the problem? Display? Power supply? Cooling? My G5's gone mad
Posted: Jan 15, 2007 6:50 AM in response to: AG-Nate
Thank you, Ag-Nate. I will try as you adivised but I con't think the fans were activeted my intensive CPU using. In most of the cases, the problems happened when the Mac was sleeping, when the minimum CPU were being used.
iMac G5 Mac OS X (10.4.8)
Timothy Klein
Posts: 15
From: Denver, CO, USA
Registered: Dec 6, 2004
Re: What's the problem? Display? Power supply? Cooling? My G5's gone mad
Posted: Jan 31, 2007 1:02 PM in response to: AG-Nate
"The Fans going at full is only because you have an application that is using a lot of cpu power and therefore causing the imac to heat up so it turns the fans on."
That's only partly right. A hard-working process will make the fans run at high speed, of course.
But, the OS is in touch with the firmware of the iMac, telling it how to run the fans, based upon information the OS X kernel is getting about the state of the hardware.
If the firmware loses touch with the OS for some reason, and is not getting instructions on how to run the fan, it will default to running them at full blast, to be on the safe side (and this "full blast" fan mode is way louder than anything you'll generally experience during normal usage, I know from experience).
So it may not be so simple as a hard-working cpu process kicking the fans on.
iMac G5 17" 1.6 GHz Rev. A Mac OS X (10.4.8) 1 GB Ram
Kensall
Posts: 2
From: London, England
Registered: Feb 2, 2007
Re: What's the problem? Display? Power supply? Cooling? My G5's gone mad
Posted: Feb 2, 2007 9:05 AM in response to: Timothy Klein
Hi I have a 20" G5 imac it's about 18 months old and I am having the same problem, It freezes and the fan runs really loud. It's nothing to do with software as my I.T. guy has done a complete re-install. All of our admin people have imacs of differring ages and the flat panels are all OK but every one of the G5s has had a booting problem. Some fell into the recall for replacement logic boards but the one I have at home is the newest and doesn't. I'm waiting for my apple reseller to get back to me, but it looks like it's the logic board and as none of the serial numbers fall into the recall, I'm expecting a big bill. I'm really disappointed as I've been a professional apple user for over 15 years and have grown to expect a certain amount of honesty and integrity from them. Looking at all of the discussion boards and the amount of people complaining of the same problem the logic boards are defective and apple should be replacing these free of charge.
i mac G5 Mac OS X (10.4.8)
a brody
Posts: 15,170
From: Silver Spring, Maryland. Don't forget to backup your data!
Registered: Dec 23, 2000
Re: What's the problem? Display? Power supply? Cooling? My G5's gone mad
Posted: Feb 2, 2007 10:27 AM in response to: Kensall
Kensall,
Welcome to Apple Discussions!
As in the other thread I wrote:
Being from England, you may find the repair program under these pages:
http://www.apple.com/uk/support/imac/repairextensionprogram/
http://www.apple.com/uk/support/imac/powersupply/repairextension/
Check both of them as they refer to different models.
If neither of yours is under the program, please start a new topic thread so someone can help you.
http://discussions.apple.com/forum.jspa?forumID=881
First off, you'll get a wider audience who may be able to solve your problem. Secondly, responses to you won't confuse the original poster with solutions that don't apply to them. And thirdly, you'll know for certain whether or not a response applies to you.
iMac C2D 2.17/20 inch/iMac G5 1.8 1st gen/iMac G4 800 Mac OS 9 Mac OS X (10.4.8) EyeTV 200, Canon PS A530 , Epson P-R220, iSight, Airport Extreme, 5th Gen iPod

I am having a very similar problem. My G5 imac has already had the logic board replaced from the leaking capacitor problem. 8 mos. later the power supply was replaced under the second recall program when it failed to start up.
It had been working now for almost a year, when about 3 mos. ago I started to experience the sudden dimming effect - if the display was untouched the screen would dim about 30% similar to a laptop in energy save mode. I checked and none of these types of options were set in the pref panes. At the same time I would have the iMac go to sleep after a while from non-use, and then when I tried to wake it it would stir for a few seconds and then go right back to sleep. It took 2-3 attempts to wake it up.
Then last week, as I tried to wake it, it just shut down instead completely. I had to hold the power button down to recycle it to get it to come back to life (3 times).
Today was it - I found what I thought was a sleeping iMac, but it will not power up at all. I opened the back cover and the power supply is working, but I cannot get the board to energize, I reset the PMU, but the #2 LED won't even blink. It is completely dead.
Basically every time I used this computer I held my breath that it would not work. After 2 recalls I still only get 9 mos. out of it? Apple is really starting to show it is like the "big" computer makers, the quality is going right down the tubes.
iMac G5 Mac OS X (10.4.4)

Reporting display problems to Apple

If you are having display problems, you should not be waiting for others to complain or just sit there stewing in your juices. Call AppleCare and tell them what's going on. People in IT have told me that one of the most frustrating things that they encounter are customers who do not complain about real problems. If they don't complain, no one knows that there's a problem, and the customer just gets depressed or hostile for mysterious reasons. You may discover that someone has been doing some kind of awkward work-around for a software problem or bug, and when you ask then how long that has been going on, they may say 5 years!
I just called AppleCare earlier today and carefully explained the symptoms of my screen and why it bothered me. I tried to explain that the gradient problem is triggering alarm bells in my brain that there must be some kind of vision problem. The guy on the other end was very patient, asked questions, and really seemed to listen. He admitted to me that they need to know this stuff. I finally had to get off the phone because of a lightning storm, but I got a case number to continue the conversation later this weekend.

Let us know what happens! I've also been on the phone with Apple -- three times in the past week -- and I've gotten two different people to actually admit, in a sort of weak way, that they're actually aware of the problem. They want my machine to go to "repair", since I'm past the 14 days, first suggesting that I bring it to the Apple Store far from my neighborhood, and then telling me that I can get a site visit after complaining that I hardly have time to get there (totally true) and I'm small and the thing is difficult for me to carry (totally true), although I have to wait for my extended AppleCare, which I purchased yesterday, to arrive in the mail. One of them told me that she thought she's heard of some of these problems actually being fixed. We'll see.
Two of them have suggested that I try an archive/reinstall, just to confirm that it's not a software problem, although both admitted that it was probably a hardware problem anyway. Has anyone tried that? Has anyone wondered what that original iMac update 1.0 actually did?
I've been trying to emphasize my theory about a DC offset on the LCD inverter output, and supposedly they are taking notes, but I wonder if any of that actually makes it up to the engineers. I'm hardly a crank. I have science, very advanced math, and IT backgrounds, and did a lot of tinkering with electronics as a kid. I really wish I could talk directly to the engineers.
And speaking from a long IT background, I can say that one of the most dangerous customer relations things you can do is deny that a real problem exists. That tactic always backfires with a vengeance.

Display problems when adding a document

Hi,
one of our customers is facing a strange problem. He runs SBO 8.8 PL18 on Windows Server 2008 R2, and the users work in SBO through Terminal Server. I will do my best to explain what happens.
When one adds a manual journal entry, the screen flickers the same number of times there are rows. Let me explain the flickering. Suppose you have 10 rows. When you click Update, the table that displays the rows is kind of refresh or repainted 10 times, then fields are empty ready for a new journal entry. The best way I can describe what one can see is that the table is rolled down as many times as there are rows. Unfortunately I have not been able to record the flickering.
This take some times, and users fell eyes fatigue because of the flickering. I have seen it on my own computer, so this problem does not relate to the computer used to work with SBO. I am told that it happens as well in A/P Invoices.
The only hint I have is that display problem does not takes place with a TS established on Server 2003.
Any hint at what this can be, has someone else seen this ?
Thanks

Hello,
If you are using Add-on then it will happed because programmer set keyword last focus in which cell and i think your programmer have code for some arthritic operation on grid then it will happen.
So discuss your programmer it will solve issue or give proper explanation for same.
It will defiantly through add-on .
for tesing pupose stop the add-on then try make new document.
Thanks
Manvendra Singh Niranjan
Edited by: Manvendra Singh Niranjan on May 21, 2011 8:07 AM

Weird Finder display problem

http://picasaweb.google.com/zhiyongsun3/200910WeirdMacProblem?feat=directlink
http://picasaweb.google.com/lh/photo/Dgq3nB0np9peZn6p_lrcJw?feat=directlink
Hi, sorry that I don't know how to post image directly, so you have to click the link to go to the picasa site to see the screen captures.
Am having weird display problem with my Snow Leopard 10.6.1 on Macbook Pro 4,1. It's only in Finder item so far, things are randomly mis-displayed, or wiped out completely. If you see my screen shots you will have a clear idea.
Is this a know problem? I don't even know how to search this problem on the web, or in this forum. I never seen such problem on my iMac with Leopard 10.5.7.
Any solutions will be appreciated. Of course, right now restart seems to be the only solution I have.

he general approach at this time is to ask if you've checked for any problematic fonts (all languages) with Apple's Font Book (look in the Applications folder). Find and remove all duplicates also.
Start there to be sure all fonts that are in play come out with a clean bill of health.
Also, don't hesisate to perform wholesale deletion of old and/or little used fonts - be skeptical of anything that has come from Office 2008, including those related to an Equation Editor installation.

Odd Display Problems - Solved (& More...)

Earlier today I picked up the weird display problem shown in this thread: http://discussions.apple.com/thread.jspa?threadID=1524985&tstart=30
I went ahead and reinstalled the Leopard Graphics Update and reset the PRAM. Problems seemed to go away. But then I ended up with an even weirder white-on-black display that looked a lot like an xray. So reset the PRAM again. No fix. Then restarted in SAFE mode - all OK, so probably not hardware. Then ran Disk Utility from the Leopard System CD. No probs revealed. Problem (white-on-black) came back on restart. Searched Discussion base and found reference to wrong toggle set in Universal Access System Preference. This was the white-on-black problem and toggling to black-on-white solved it.
Here's the part I don't understand (but like): the machine is much faster than it was. Safari pages load with great speed, apps open faster, etc. It may have been the series of restarts that cleared something, but somewhere in this troubleshooting string things overall got a lot better. Beats me, but like it... YMMV.

I just have some general thoughts. Does it look correct if you connect it to a different monitor? (to find out if the TV / TV connection is the problem) Did you install something in your house that could affect the signal that is being transmitted through the wire? (I highly doubt it) Are you SURE you didn't install / update / change any settings before it stopped working?
The problem you described reminds me a little of the glitchy GTK problems I was having with my Radeon. My problem ended up being related to the open source driver and KMS. Is there another driver or video card you could try? Is your video card getting too hot?

Conclusions so far on the display problems?

After reading thread after thread about the display problems this is what I understand:
Most of the 20-inch Alu-iMacs seem to have problems? Not being able to show solid colours without a gradient from top to bottom is the biggest issue?
"Alot" of the 24-inch Alu-Imacs have problems with a left to right gradient, often white to yellowish white.
Apple is not admitting that the Alu-iMacs have general display problems. (Maybe due to too cheap display technique?)
We don't know for sure if it is hardware or software related?
Is wait and see the best practice for one who want to buy a new 20-inch Alu-iMac?
/Krister

What I'd like to know is why? Could the bottom lamp be getting more power than the top one from the inverter board?
I received a lot of these for our labs and most of them (I haven't opened them all yet) have lower lamps that appear almost twice as bright at the top lamps... It's in the hardware, and I don't know what to do about it.
So, where is the problem? Traditionally the lamps (usually two below and two above) are identical models, so could this be an inverter issue? Has anyone tried to get a voltage reading from the lamps to see how much output the inverter is giving them? (Not at all suggesting, just asking. I know what Apple would say if I asked people to go cracking their iMacs open.)
Could the layer of glass in the LCD be refracting more light toward us in the bottom 2-3 inches and away from us for the top 2-3 inches?
It's frustrating to experience, but worse to not even know what causes it. Because, to Apple engineering... What problem? There must be one bad LCD out there... and we all have it.
Anyway, anyone who has any light to shed on the subject I'd love to hear it... (just add it to the top few inches of my display.)
-John

Relative time displaying improperly

Hello everyone,
I'm struggling with the relative time display function in my waveform chart. It seems to be displaying my data improperly. I'm collecting temperature readings every five seconds, displaying the data on the waveform chart, and writing the data toa text file. My data is writing correctly to the text file, but it looks like mychart is not interpreting the times appropriately. I should have a new data point every five seconds, but instead it's displaying a new point every 1 second, despite there being 5 seconds between each data collection instance. I've attached a jpg of the graph output, as well as the vi I'm working with. The data collection step is #7 on my state machine. Thanks ahead of time for any help you can give.
Matt
Attachments:
Relative Time problem.jpg ‏78 KB
PND1 USV Recording.vi ‏270 KB

A chart has no way of knowing what your loop time is. You have to program that information by writing to a property node. Just look at the example called Real-Time Chart.

I called Apple about the 20" iMac display problem today...

I have the same display problem that I've been reading about here, it's much much brighter on the bottom of my screen than on the top and viewing the screen from an angle makes the screen look very dusty and dirty.
First I talked to technical support and because I live 75 miles from an Apple store, he said a technician would come and look at it tomorrow even though I said it was a problem that is very common and just not on my computer. It will be interesting to see what the technician says.
Then I called customer relations to put in a formal complaint against the 20" iMac screens. I told the man that even on the Apple support forums here that everyone was complaining about it. He said everyone where he worked was using 20" iMacs and as he looked at the screens next to him, he noticed that the colors were all off, looking dirty brown like mine. He said that's just how the new 20" screens were. I tried my best to tell him that it just wasn't right that the screens were so flawed and, although he kind enough and understanding, he didn't see any big problem with them.
He did submit my formal complaint at the end but I have to tell you all, it sure looks like Apple does not see any problem with these screens. He suggested that I write to Apple at their corporate office to let them know of these problems. Here is that address:
Apple
1 Infinite Loop
Cupertino, CA 95014
So that's my next step, writing to the corporate office.
I'll update this post after the technician comes tomorrow. I really don't expect this to be fixed but I shall let everyone know.
Martha

I have been watching this forum for months and have come to a conclusion that Apple
has taken the "easy road" by using cheaper components as evidenced by these discussions pertaining to cheap lcd computer screens. Also, with the Imac there is limited upgrade paths and the fact now
the imac has become more of a glorified computer with the internals of a laptop which suggests it is almost mandatory to pay extra for apple care for 3 year warranty because of uncertainty for longevity in my opinion. I am still using an apple 2002 quicksilver G-4 computer almost 6 years old that has not given me and problem. I have also been able to upgrade the hard drive, dvd rom drive myself-you cannot readily do with the current imacs. I was thinking about replacing my G-4 with an Imac, but have now come to the conclusion that Apple is losing focus with providing quality products and unless something drastic happens which I doubt, Apple will lose me as a future customer. I may be forced to go to the other side and buy a PC.

G570 display problem

HI,
Got my G570 just over 2 years ago with minor problem through out the times but 3 days ago there is a display problem which I am unable to fix.
watching you tube and it crashed suddenly, BSOD, and showing all error and dump memory count down etc.
power up the computer again with only a blank screen, no lenovo logo, window logo etc
can hear it boot into window but just didn't show anything. Is it something I can fix personally or does it require some major work?
Thanks all in advance.

Hi Coolcold,
I’m glad that the issue is resolved, as this step resetting the RAM was not suggested initially in the post because if the computer has any type of extended warranty it will get VOID. As informed earlier any dumping blue screen issue is related to RAM as its flash memory becomes full and starts dumping the data packets. Please feel free to post in Lenovo Community Forums if you have any further queries!
Cheers!
Shiva Kumar
Did someone help you today? Press the star on the left to thank them with a Kudo!
If you find a post helpful and it answers your question, please mark it as an "Accepted Solution"! This will help the rest of the Community with similar issues identify the verified solution and benefit from it.
Follow @LenovoForums on Twitter!

Wierd lines on my display and frequent lock-ups w/ and w/o display problems

When booting I sometimes get weird lines and blocks on my display (the GRAY Apple screen) and then it hangs, other times the computer will boot and run fine for 20-30 minutes and then the display goes wonkers with blocks and lines and the computer does not respond. The only way I can get it to boot is to reset the PRAM by letting it CHIME 3x and then occasionally it will boot without issue and run, while other times I still get the blocks and lines on the display.
When I am able to get it to recover and re-boot after the lock-up and display problems and occasionally the box in the middle asking me to re-boot similar to a kernel panic the OPS gives me the option to REPORT the error and here is the error for others who would know more...
Thank you in advance,
Darren
Interval Since Last Panic Report: 104960 sec
Panics Since Last Report: 5
Anonymous UUID: 7D1AEF43-7E19-4F58-A1E0-48FA992A2814
Wed Nov 18 15:49:50 2009
panic(cpu 0 caller 0x9cdb10): NVRM[0/1:0:0]: Read Error 0x00009410: CFG 0xffffffff 0xffffffff 0xd2000000, BAR0 0xd2000000 0x5d3e2000 0x084700a2, D0, P1/4
Backtrace (CPU 0), Frame : Return Address (4 potential args on stack)
0x5c99b7d8 : 0x21b2bd (0x5cf868 0x5c99b80c 0x223719 0x0)
0x5c99b828 : 0x9cdb10 (0xbb7fec 0xc209c0 0xbc3660 0x0)
0x5c99b8c8 : 0x147690d (0x8b5ac04 0x7edf004 0x9410 0xabd962)
0x5c99b908 : 0x1534e6a (0x7edf004 0x9410 0x5c99b968 0x9)
0x5c99b948 : 0xb51ca5 (0x7edf004 0x91ed004 0x0 0x0)
0x5c99b968 : 0xac155b (0x91ed004 0x5c99baa4 0x0 0x0)
0x5c99b9b8 : 0x145f290 (0x7edf004 0x3d0900 0x5c99baa4 0x0)
0x5c99bad8 : 0xab2821 (0x7edf004 0x91cf004 0x815200c 0x200)
0x5c99bb18 : 0xb1f172 (0x7edf004 0x91cf004 0xeb9bcc0 0xeb9bc04)
0x5c99bbc8 : 0xb202db (0x7edf004 0x91f0404 0x0 0x0)
0x5c99bc58 : 0x14bb7a3 (0x7edf004 0x91f0404 0x9 0x2)
0x5c99bd68 : 0x14ed407 (0x7edf004 0x91cf404 0x0 0x0)
0x5c99be98 : 0xad3934 (0x7edf004 0x91ca404 0x0 0x0)
0x5c99bec8 : 0x9d61fb (0x7edf004 0x91ca404 0x0 0x0)
0x5c99bf08 : 0x5491b5 (0x0 0x9499680 0x1 0x29c50a)
0x5c99bf58 : 0x5481e6 (0x9499680 0x1 0x5c99bf88 0x547d9d)
0x5c99bf88 : 0x548640 (0x8abaf00 0x7e9ecc0 0xe780850c 0x2a6e5f)
0x5c99bfc8 : 0x29d68c (0x8abaf00 0x0 0x10 0x88bbfc4)
Kernel Extensions in backtrace (with dependencies):
com.apple.nvidia.nv50hal(6.0.6)@0x136b000->0x17f1fff
dependency: com.apple.NVDAResman(6.0.6)@0x96f000
com.apple.NVDAResman(6.0.6)@0x96f000->0xc21fff
dependency: com.apple.iokit.IOPCIFamily(2.6)@0x932000
dependency: com.apple.iokit.IONDRVSupport(2.0)@0x961000
dependency: com.apple.iokit.IOGraphicsFamily(2.0)@0x943000
BSD process name corresponding to current thread: kernel_task
Mac OS version:
10C540
Kernel version:
Darwin Kernel Version 10.2.0: Tue Nov 3 10:37:10 PST 2009; root:xnu-1486.2.11~1/RELEASE_I386
System model name: MacBookPro3,1 (Mac-F4238BC8)
System uptime in nanoseconds: 3788331456483
unloaded kexts:
com.apple.driver.AppleFileSystemDriver 2.0 (addr 0xf02000, size 0x12288) - last unloaded 94521475551
loaded kexts:
org.virtualbox.kext.VBoxNetAdp 2.2.2
org.virtualbox.kext.VBoxNetFlt 2.2.2
org.virtualbox.kext.VBoxUSB 2.2.2
org.virtualbox.kext.VBoxDrv 2.2.2
com.bresink.driver.BRESINKx86Monitoring 5.0
com.pctools.iantivirus.kfs 1.0.1
com.apple.driver.AppleHWSensor 1.9.2d0 - last loaded 31800108689
com.apple.filesystems.ntfs 3.1
com.apple.filesystems.autofs 2.1.0
com.apple.driver.AppleHDA 1.7.9a4
com.apple.driver.AirPort.Atheros 412.19.4
com.apple.kext.AppleSMCLMU 1.4.5d1
com.apple.driver.SMCMotionSensor 3.0.0d4
com.apple.DontSteal_Mac_OSX 7.0.0
com.apple.driver.AudioIPCDriver 1.1.2
com.apple.driver.AppleIntelMeromProfile 19
com.apple.driver.ACPISMCPlatformPlugin 4.0.1d0
com.apple.driver.AppleLPC 1.4.9
com.apple.driver.AppleBacklight 170.0.14
com.apple.driver.AppleUpstreamUserClient 3.1.0
com.apple.GeForce 6.0.6
com.apple.driver.AppleUSBTrackpad 1.8.0b4
com.apple.driver.AppleUSBTCKeyEventDriver 1.8.0b4
com.apple.driver.AppleUSBTCKeyboard 1.8.0b4
com.apple.iokit.SCSITaskUserClient 2.6.0
com.apple.BootCache 31
com.apple.AppleFSCompression.AppleFSCompressionTypeZlib 1.0.0d1
com.apple.iokit.IOAHCIBlockStorage 1.6.0
com.apple.iokit.AppleYukon2 3.1.14b1
com.apple.driver.AppleAHCIPort 2.0.1
com.apple.driver.AppleSmartBatteryManager 160.0.0
com.apple.driver.AppleIntelPIIXATA 2.5.0
com.apple.driver.AppleUSBHub 3.8.4
com.apple.driver.AppleFWOHCI 4.4.0
com.apple.driver.AppleUSBEHCI 3.7.5
com.apple.driver.AppleUSBUHCI 3.7.5
com.apple.driver.AppleEFINVRAM 1.3.0
com.apple.driver.AppleRTC 1.3
com.apple.driver.AppleHPET 1.4
com.apple.driver.AppleACPIButtons 1.3
com.apple.driver.AppleSMBIOS 1.4
com.apple.driver.AppleACPIEC 1.3
com.apple.driver.AppleAPIC 1.4
com.apple.security.sandbox 0
com.apple.security.quarantine 0
com.apple.nke.applicationfirewall 2.1.11
com.apple.driver.AppleIntelCPUPowerManagementClient 96.0.0
com.apple.driver.AppleIntelCPUPowerManagement 96.0.0
com.apple.driver.DspFuncLib 1.7.9a4
com.apple.driver.AppleProfileReadCounterAction 17
com.apple.driver.AppleProfileTimestampAction 10
com.apple.driver.AppleProfileThreadInfoAction 14
com.apple.driver.AppleProfileRegisterStateAction 10
com.apple.driver.AppleProfileKEventAction 10
com.apple.driver.AppleProfileCallstackAction 20
com.apple.iokit.IOFireWireIP 2.0.3
com.apple.iokit.IO80211Family 310.6
com.apple.iokit.IOSurface 73.0
com.apple.iokit.IOBluetoothSerialManager 2.2.4f3
com.apple.iokit.IOSerialFamily 10.0.3
com.apple.iokit.IOAudioFamily 1.7.2fc1
com.apple.kext.OSvKernDSPLib 1.3
com.apple.driver.AppleHDAController 1.7.9a4
com.apple.iokit.IOHDAFamily 1.7.9a4
com.apple.iokit.AppleProfileFamily 41
com.apple.driver.AppleSMC 3.0.1d2
com.apple.driver.IOPlatformPluginFamily 4.0.1d0
com.apple.nvidia.nv50hal 6.0.6
com.apple.NVDAResman 6.0.6
com.apple.iokit.IONDRVSupport 2.0
com.apple.iokit.IOGraphicsFamily 2.0
com.apple.driver.CSRUSBBluetoothHCIController 2.2.4f3
com.apple.driver.AppleUSBBluetoothHCIController 2.2.4f3
com.apple.iokit.IOBluetoothFamily 2.2.4f3
com.apple.iokit.IOUSBHIDDriver 3.8.4
com.apple.driver.AppleUSBMergeNub 3.8.5
com.apple.driver.AppleUSBComposite 3.7.5
com.apple.iokit.IOSCSIMultimediaCommandsDevice 2.6.0
com.apple.iokit.IOBDStorageFamily 1.6
com.apple.iokit.IODVDStorageFamily 1.6
com.apple.iokit.IOCDStorageFamily 1.6
com.apple.driver.XsanFilter 402.1
com.apple.iokit.IONetworkingFamily 1.9
com.apple.iokit.IOATAPIProtocolTransport 2.5.0
com.apple.iokit.IOSCSIArchitectureModelFamily 2.6.0
com.apple.iokit.IOAHCIFamily 2.0.2
com.apple.iokit.IOATAFamily 2.5.0
com.apple.iokit.IOUSBUserClient 3.8.5
com.apple.iokit.IOFireWireFamily 4.1.7
com.apple.iokit.IOUSBFamily 3.8.5
com.apple.driver.AppleEFIRuntime 1.3.0
com.apple.iokit.IOHIDFamily 1.6.1
com.apple.iokit.IOSMBusFamily 1.1
com.apple.kext.AppleMatch 1.0.0d1
com.apple.security.TMSafetyNet 6
com.apple.driver.DiskImages 281
com.apple.iokit.IOStorageFamily 1.6
com.apple.driver.AppleACPIPlatform 1.3
com.apple.iokit.IOPCIFamily 2.6
com.apple.iokit.IOACPIFamily 1.3.0
Model: MacBookPro3,1, BootROM MBP31.0070.B07, 2 processors, Intel Core 2 Duo, 2.2 GHz, 4 GB, SMC 1.16f11
Graphics: NVIDIA GeForce 8600M GT, GeForce 8600M GT, PCIe, 128 MB
Memory Module: global_name
AirPort: spairportwireless_card_type_airportextreme (0x168C, 0x87), Atheros 5416: 2.0.19.4
Bluetooth: Version 2.2.4f3, 2 service, 0 devices, 1 incoming serial ports
Network Service: AirPort, AirPort, en1
PCI Card: pci168c,24, sppci_othernetwork, PCI Slot 5
Serial ATA Device: ST9320421ASG, 298.09 GB
Parallel ATA Device: MATSHITADVD-R UJ-857E
USB Device: Built-in iSight, 0x05ac (Apple Inc.), 0x8502, 0xfd400000
USB Device: Apple Internal Keyboard / Trackpad, 0x05ac (Apple Inc.), 0x021a, 0x5d200000
USB Device: Bluetooth USB Host Controller, 0x05ac (Apple Inc.), 0x8205, 0x1a100000
Anyone know what is causing my problems? I thought it was heat so I downloaded a CPU and FAN temperature monitor and the CPU was getting VERY HOT at first so I then ramped-up the CPU FAN SPEED to maximum - it turns out the CPU FAN was not rotating well at low speed - since then I have cleaned and checked the fans and they all work as they should and blow on high(er) when the CPU temperature is above a certain level.

S.U.
Is there a kb article or something that would illuminate what to look for in these logs, or is it a matter of learning by osmosis?
Both. I am not skilled in reading logs. It is a very technical and time consuming task for the uninitiated (me!) In scanning a log I look for the backtrace and loading dependencies. The first item in the backtrace is usually the roadblock.
Beyond that you can look at the Technical Note TN2063: Understanding and Debugging Kernel Panics
Should make for good bedtime reading. Puts you right to sleep.
c

Display Problem with RowHeader of a Scroll Pane

Hi,
I am trying to display row headers for a table using another table
Here is the code
import javax.swing.*;
import javax.swing.table.*;
public class RowNumberHeader extends JTable {
protected JTable mainTable;
public RowNumberHeader(JTable table) {
    super();
    mainTable = table;
    setModel(new RowNumberTableModel());
    setRowSelectionAllowed(false);
    JComponent renderer = (JComponent)getDefaultRenderer(Object.class);
public int getRowHeight(int row) {
    return mainTable.getRowHeight();
class RowNumberTableModel extends AbstractTableModel {
    public int getRowCount() {
      return mainTable.getModel().getRowCount();
    public int getColumnCount() {
      return 1;
    public Object getValueAt(int row, int column) {
      return new Integer(row + 1);
}and then
        JTable displayTable = new JTable(...);
        scrollPane = new JScrollPane(displayTable);
        JViewport jvp = new JViewport();
        jvp.setView(new RowNumberHeader(displayTable));
        scrollPane.setRowHeader(jvp);the problem I have is that when a row is selected inside the row header, some rows go blank and you can see the selection is all screwed up. I tried setting the selection mode to ListSelectionModel.SINGLE_SELECTION but that didn't help.
A refresh of the entire screen (minimize/maximize) seems to resolve the problem. I am using jdk1.4.1 in Windows 2000.
Any ideas?
Sylvain

Again the problem is that when you click on the row headers, some row header rows go blank (completely white) so you can't see what they show.
ie say I have table
Row 1 - 1 2 3
Row 2 - 2 4 5
Row 3 - 5 7 7
Row 4 - 5 6 7where Row X is the row header. So for example, if you click on Row 2, you will get something like
Row 1 - 1 2 3
Row 2 - 2 4 5
      - 5 7 7
Row 4 - 5 6 7until the screen is refreshed or you click some other row header.
hmm ok, I added calling repaint on the table whenever a row is selected and at least the display problem goes away; however, the selected indexes from the event don't always match the index of the row selected. I think actually that may be the source of the display problem.
Here is the code I added in the constructor:
        getSelectionModel().addListSelectionListener(new ListSelectionListener()
            public void valueChanged(ListSelectionEvent e)
                System.out.println("Header table selection is: First = " + e.getFirstIndex() +
                                   " Last = " + e.getLastIndex());
                RowNumberHeader.this.repaint();
        });

Macbook and HP 2510i monitor display problem - help

Hello,
I am having display problem with my Macbook (Intel) and my 25'' HP 2510i monitor via DVI.. Until last monday I do not have any problems and my monitor was working flawless with my macbook.. Last monday I used the monitor with my HP Notebook to try Windows 8 on large screen. And after that try when I connect the monitor back to Macbook there is no display.. I tried the steps below
- I connected Macbook to my Phillips Plasma TV and it worked (no error with display card of Macbook or the wire or the adaptor)
- I connected the monitor back to HP laptop it worked.. (so no error with the monitor)
- I unplugged monitor to cut electricity and tried.. nope not working
- I did several tricks with macbook no effect
- I reinstalled Mountain Lion .. no effect
- I formatted Macbook, reinstalled Snow Leopard.. Not working.. I installed back Mountain Lion .. not working
Whatever I tried the HP2510i is not displaying, mirroring my Macbook..
Any help will be appreciated
Thanks

My graphic card details;
NVIDIA GeForce 9400M:
Chipset Model:          NVIDIA GeForce 9400M
Type:          GPU
Bus:          PCI
VRAM (Total):          256 MB
Vendor:          NVIDIA (0x10de)
Device ID:          0x0863
Revision ID:          0x00b1
ROM Revision:          3462

Why is netflix having display problems on my macbook pro... HDCP compliance?

Watching Netflix and all of a sudden it says "Display Problems" Make sure your monitor is HDCP Compliant and is not setup for mirror airplay??

The issue is from Safari defaulting to HTML5 vs using Silverlight like it did in Mavericks.
So the options are, if you want to use Safari goto your Netflix account, playback preferences and turn off HTML5. This will revert to Silverlight and will AirPlay fine*in Safari.
If you want to use HTML5, just leave the setting for HTML5 on in Netflix and use Chrome, Firefox, etc.
You can't currently have both Safari and HTML5 Netflix when using AirPlay. You'd think Safari would be a little bit more powerful with Apples stances on browser extensions.

Display Problem with my Mac Pro and LG Flatron Wide Monitor in Mountain Lion

After upgrading to Mountain Lion, my Mac Pro has display problems with my LG Flatron display. The image is displayed with a black bar on the right and on the bottom. And the left side of the content is not visible. I tried every resolution available in the Display System Preferences, they are different in terms of how big the black bars are, and what part is not visible, but none of them are correct. I held down the option key to try to detect displays or switch to resolutions that are not normally available. When I restart the image is lined up with the display, but if the display ever goes to sleep or gets turned off, the image reverts to being off center, and the only way I can get it back is to restart... The interesting thing is that this monitor works fine with the same machine if I reboot using BootCamp into Windows 7. The Monitor also works fine, connecting the same connector to a Mac Mini, although that mac mini is running 10.6 and not Mountain Lion. I've reset the SMC and restarted countless times, I don't see any other levers to pull or things to try...

That card is for a PC it may not give you Startup and Option-Boot screens.
The 7950 "Mac Edition" card has a very distinctive look:
http://www.sapphiretech.com/presentation/product/product_index.aspx?cid=1&gid=3& sgid=1157&pid=1777&psn=&leg=0&lid=1

Related to display problem

Similar Messages

Maybe you are looking for